WLC 5508 - AP's are conecting with WLC but unable to regester with WLC
Hi,
I have old 4400 series wlc and recently I have configured 5508 wlc and 6 new Access Point.
when you go to MONITER - AP Join their it shows connected AP detail with AP IP address but if u see it in under WIRELESS Option their is not showing any AP's detail.
I mean to say that AP's are connecting with WLC and also getting IP address but unable to regester with WLC.
Even I have checked with remove Radius configuration also from wlc as well as from acs.
please suggest......
Im not able to post info it says below msg, plesse suggest how i can provide detail.
This message can not be displayed due to its content. Please use the contact us link with any questions.
Also I like to say that after factory rest 4 out of 6 is done now 2 remain.
Similar Messages
-
Hello everyone!
I have a controller of the 5508 series and Ap 1602.
Ap manage to obtain IP addresses from the DHCP server that is the 5508 controller.
but the Rev fail to register, please I really vesoin help.
Below are some show:
1. AP: sh version
AP0006.f6d5.ea9c#sh version
Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 04:52 by prod_rel_team
ROM: Bootstrap program is C1600 boot loader
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)
AP0006.f6d5.ea9c uptime is 38 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1602E-E-K9 (PowerPC) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FGL1709Z6PC
PowerPC CPU at 533Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.4.1.37
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:06:F6:D5:EA:9C
Part Number : 73-14508-04
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC17020MTR
Top Assembly Part Number : 800-38553-01
Top Assembly Serial Number : FGL1709Z6PC
Top Revision Number : A0
Product/Model Number : AIR-CAP1602E-E-K9
Configuration register is 0xF
2. AP: sh ip interface brief
Interface IP-Address OK? Method Status Protocol
BVI1 unassigned YES DHCP up up
GigabitEthernet0 unassigned NO unset up up
GigabitEthernet0.1 unassigned YES unset up up
3. AP: sh inventory
---nothing---
4. WLC: sh sysinfo
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.3.101.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLC-EEML
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.10.10.1
Last Reset....................................... Software reset
System Up Time................................... 1 days 1 hrs 13 mins 37 secs
System Timezone Location.........................
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +39 C
--More-- or (q)uit
External Temperature............................. +25 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0
Burned-in MAC Address............................ E0:2F:6D:5D:7D:C0
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
5. WLC: sh time
Time............................................. Fri Jan 3 12:21:37 2014
Timezone delta................................... 0:0
Timezone location................................
NTP Servers
NTP Polling Interval......................... 86400
Index NTP Key Index NTP Server NTP Msg Auth Status
also, I'm in africa but
I can not change the country or the time zone
thank you in advance for your helpHi,
By CLI:
Before change the country code on wlc , You must disable
WLC > config 802.11a disable network
WLC >config 802.11b disable network
WLC >config country SA (...or wtever country u are in)
And then enable both network again.
WLC >config 802.11a enable network
WLC >config 802.11b enable network
By GUI:
First disable both network 802.11a and 802.11b
Follow these steps to disable the 802.11a and 802.11b/g networks as follows:
a. Choose Wireless> 802.11a/n > Network.
b. Unselect the 802.11a Network Status check box.
c. Click Apply to commit your changes.
d. Choose Wireless > 802.11b/g/n > Network.
e. Unselect the 802.11b/g Network Status check box.
f. Click Apply to commit your changes.
Change country code on WLC now:
Choose Wireless > Country
after changing the country code please enable both networks(802.11a and 802.11b)
Hope it helps.
Regards
Dont forget to rate helpful posts. -
Not working anything not charging no conection with pc and if somebody calls me it tells that i am not answering
That thing that just happended whith my iphone and now i can not do anything whith my iphone it just turned offYes, you got the phone which was currently eligible for Early Edge at the time. This changes from time to time. When the iPhone 6/6+ was first released those were the ONLY phones you could purchase on Early Edge. This was for September and October of 2014. You would not have been able to purchase any other phone with Early Edge at the time. At the time, this made a lot of android phone owners angry, just as it is making the OP(an iPhone owner) angry now. Then it was the Droid Turbo ONLY, then it was....
One of the requisites AS LISTED ON THE EDGE PAGE is that your line must be eligible for an upgrade. Verizon lifts this requirement IF you want to purchase a specific phone. If the phone you want is not eligible for Early Edge at this moment, it may be at some point in the future and the phone CURRENTLY available may NOT be available for Early Edge. You were able to get the phone you wanted on Early Edge because it was the phone(or one of the phones) eligible at the time for Early Edge.
Verizon does not have a link for Early Edge because it is not always available AND the eligible phones change from time to time. This is no different than any other special they occasionally run.
Regardless, since a link WAS given for Edge which DOES list upgrade eligibility as being a requirement, if someone DOES NOT fulfill that requirement it is not out of the question that other portions of Edge may be different, too, such as what you posted "All Verizon Wireless smartphones, tablets and basic phones are eligible for Verizon Edge." If Verizon relaxes a requirement to enter into Edge, why is it so hard to fathom they may ALSO change something else such as which phones are eligible???
The fact that the OP IS NOT able to purchase an iPhone on Early Edge simply reinforces this fact. -
This is my very first time in this forum, I am new to
dreamwear, and I am encounter that for the last three weeks i can
not conect with my site to upload some material.
when i try i recive this first notice "host, found.
connecting"; them this one "waiting for server" and finaly this
"and FPT error ocurrer, cannot make connection with host".
I checke my address, login name and password and they are ok.
can some body give me and idea what could be wrong.
thank you in advance
Texthttp://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_14834
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_19012
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"oeh316" <[email protected]> wrote in
message
news:fm3e5l$n6q$[email protected]..
> This is my very first time in this forum, I am new to
dreamwear, and I am
> encounter that for the last three weeks i can not conect
with my site to
> upload
> some material.
> when i try i recive this first notice "host, found.
connecting"; them this
> one
> "waiting for server" and finaly this "and FPT error
ocurrer, cannot make
> connection with host".
> I checke my address, login name and password and they
are ok.
> can some body give me and idea what could be wrong.
> thank you in advance
Text
> -
Why cant i conect with itunes, (0x800B0101)
i try to open itunes on my computer, windows 7, and its said it hase fail to conect with itunes because of an error. Then, under that line it says a number; (0x800B0101). What do i have to do to fick this problem.
Is your iPod configured to sync these videos from under its Movies tab?
If so, are you getting any error messages while trying to sync them?
B-rock -
My blooth's I phone 5 does not conect with Bose A20 Aviation Headset How can I manage ??
My blooth's I phone 5 does not conect with Bose® A20® Aviation Headset How can I manage ??
The Bose headset is pluged on Aircraft conector I have been traying many way to conect The I Phone 5 I have not gotten yet , I heard that a lot of people are complining about I phone with lastet IOS softerwear version is quite dificult to conect othes diveces
-
No conecte with other becouse new vregan 5.1
no conecte with other becouse new vregan 5.1
ido not what doing ibuy iphon4 but no working concted rcive&send
تليفونى لايعمل لانى عملتله تحديث وعايزه يشتغل
5.0.1 (9a405) الاصدار:
at&t 11.0 شركة الاتصلات
mc319ll النموذج
870231gla4t الرقم التسلسلى
iccid 8920 0180 11****77 331
imei 01233*****898 5From what you have written you appear to have an AT&T iPhone. Are you located in the US. If not, and you try to update the iPhone to the new software, it may have been jailbroken/unlocked via software and you will find that updating it has locked it back to the original provider. If that is the case, there is nothing that can be done for you here.
I also suggest that you remove your serial number and IMEI from your post. -
When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version. -
When I save photos or videos from my iPhone 4S to my PC they are all sideways. Is there a way to prevent this from happening? All are taken with the phone in portrait mode.
Shot videos ONLY in landscape. For photos choose what's you like. Maybe you have to rotate photos on PC. What's your operating system?
-
I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac). For the most part the dupes are an exact copy, but not always. I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas
pacull,
Use iCal>View>Show Notifications to choose what to do with the notification. -
Content Tab: None of the fact tables are compatible with the query request
Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
DevHi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev -
How many 'seats' are included with Adobe Creative Cloud for teams?
How many 'seats' are included with Adobe Creative Cloud for teams?
Hi Mrfrodo,
There isn't a set number, you purchase the number you would need based on the size of your organization.
This section of the FAQ might also be helpful for you to learn more about team too.
http://www.adobe.com/products/creativecloud/faq.html#ccm-teams
-Dave -
What are the SQL server versions those are compatible with XI 3.0.
Hi All,
Please suggest,
what are the SQL server versions those are compatible with XI 3.0.
or with which SQL server versions XI 3.0 will interact using JDBC Adapter.Check in the [Product Availability Matrix |https://websmp201.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900000192]in market place for more information on this
Thanks
SaNv... -
How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.
Ask the headset manufacturer.
Barry -
ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source
What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
Cheers, Tom
Maybe you are looking for
-
How to issue print command from report/form server to client printer on web
1) We have a client server application which is to be deployed on the web environment. The reports generated in our application are having a destination type as File. These reports are printed after applying some print format (escape sequences) which
-
Passing table values from one webdypro screen to the next in BPM flow
Hi, I have a BPM scenario where in User 1 will be entering data on a java webdynpro view in the form of a table. The user 1 should be able to edit contents of the table. These set of values in the table from User 1 needs to be passed to User 2 throug
-
Print priview and spool output are different
Hi Friends, i am facing a problem......for a output type (script realted) when i am giving print priview for per a PO .. in this priview 2 tax values are showing right. But when i am generating SPOOL in this that 2 tax values are Showing WRONG.. why
-
Publishing a msaccess database
I created an Access 2013 database and when trying to publish it requested for a url which I did write but did not publish instead asked for a sharepoint ..... is it possible to publish access database using any other url other than sharepoint.
-
What am I doing wrong? Hi, this is a re-branded follow-up post of a question yesterday. I'm trying to make my AEBS work in bridge mode without success. I have followed instructions from documentation (http://manuals.info.apple.com/en/DesigningAirPort