WLS doesn't start, plz help!!!

Hello,
I have been getting this nasty error when trying to start weblogic server through my newly created domain.
The WebLogic Server did not start up properly.
Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
The point is even if i alter boot.properties with the correct username and pwd (these values are the same that I used while creating the domain), I see the same error.
Any help is appreciated.

Hi,
Ensure that the boot.properties file is encrypted. If not it generally means that the server is not recognizing the file. But as per the error message you are getting it should not be the case.
step1: Try copying the boot.properties to another backup location and delete the existing one. Then try to start the server which would prompt you for password. Try entering your admin password and make sure the server boots up properly.
step2: Then get the boot.properties file back and edit the information once again to add the details like:
username=weblogic
password=weblogic
I hope this helps

Similar Messages

  • I have i phone 4 and i didnt remove my i tune id and passward and i forgotton both and factory restored my i phone now it dosn't start plz help me ..

    i have i phone 4 and i didnt remove my i tune id and passward and i forgotton both and factory restored my i phone now it dosn't start plz help me ..

    Seriously, you can't remember either your Apple ID or Password? Well, since you're logged in here, you obviously can remember that Apple ID/Password.
    Regardless, I suggest you remember this info, 'cause if you can't, all you'll own is a paperweight. And no, Apple can't/won't help you.

  • TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    try restoring see guide
    http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

  • Integrated wls doesn't start

    Hi,
    I'm using JDev 11.1.1.3.
    I was working normally but suddenly the integrated wls doesn't start anymore.
    When I start the server, the log stops here
    <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    Although the log says "RUNNING", the server is not running. If I test, through the server properties, all tests fail, except the HTTP.
    I tried to delete the cache folder and re-install the middleware... the problem remains.
    Thanks.

    Hi,
    bellow follows the entire log.
    I can't launch the console... the log shows this message "<Logger><error> ServletContainerAdapter manager not initialized correctly."
    *** Using port 7101 ***
    D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
    PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;D:\ORACLE\PRODUCT\10.2.0\CLIENT_3\BIN;D:\ORACLE\PRODUCT\10.2.0\CLIENT_2;C:\Windows\SYSTEM32;C:\Windows;C:\Windows\SYSTEM32\WBEM;C:\Windows\SYSTEM32\WINDOWSPOWERSHELL\V1.0\;C:\PROGRAM FILES\TORTOISESVN\BIN;C:\Oracle\Middleware\jdeveloper\jdev\bin;C:\Oracle\Middleware\jdeveloper\ant\bin;C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin;C:\Program Files\QuickTime\QTSystem\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_18"
    Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
    Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware3\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=proxy.link.pt -Dhttp.proxyPort=3128 "-Dhttp.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dhttps.proxyHost=proxy.link.pt -Dhttps.proxyPort=3128 "-Dhttps.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
    <30/Ago/2011 18H01m BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
    <30/Ago/2011 18H01m BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <30/Ago/2011 18H01m BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
    <30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    <30/Ago/2011 18H01m BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
    <30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:289b:22c3:bcf6:2bce:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Warning> <Server> <BEA-002611> <Hostname "pwpmedeiros.aitec.pt", maps to multiple IP addresses: 169.254.251.192, 192.168.59.64, 192.168.181.1, 192.168.159.1, fe80:0:0:0:8935:43d7:b990:fbc0%17, fe80:0:0:0:289b:22c3:bcf6:2bce%18, fe80:0:0:0:e437:fbfb:c9ee:9352%19>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.59.64:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.159.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.181.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:5efe:c0a8:b501:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:e437:fbfb:c9ee:9352:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 169.254.251.192:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:8935:43d7:b990:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:f102:6891:b891:3efd:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a9fe:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:3b40:7101 for protocols iiop, t3, ldap, snmp, http.>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

  • HT201407 i tried above mention resolution but my phone is not getting started plz help me to activate the phone

    i tried to update mu iphone 3gs from 4.1 to 6.0.1 but it is not activated it shows "your iphone cloud could not be activated because the activation server is temporarily unavailable.try connecting your iphone to itunes to activate it ,or try again in a few mintutes.
    if this problem presists ,contact Apple Support at apple.com/support
    i tried every thing but it is not happening so plz help me

    If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
    Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
    http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

  • Hi everyone, I have a computer linked to my iPAD through itunes.  Then my Computer crashed and had to get  a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

    Hi everyone, I have a computer linked to my iPAD through itunes.  Then my Computer crashed and had to get  a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

    what do you mean the old computers link?
    my ipad is sycned with my computer but nowhere is there a link
    and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

  • When I try to download any thing from AppStore it only loads and loads it doesn't downloads plz help me

    pplz help me when I download any thing from AppStore it only loads and loads don't downloads

    Try closing the App Store and reset yor iPad. Double tap the home button and find the App Store app. Swipe the thumbnail preview of the App Store up off the top of the screen to close it. then hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.
    If that doesn't work, try resetting your router. Unplug it for about 30 seconds then plug it in again.
    If that fails, reset all settings. Settings>General>Reset>Reset all settings. No data is lost, but all device settings have to be entered again.

  • J2EE Engine doesn't start - Need help on this urgently

    Hi Any one Please help me!!
    I tried all the ways to login to Visual Administrator.
    I also used emergency user ID but it too falied.
    I then tried to add another usr to direct dispatcher method and gave the port 8101 instead of 50004.It logged upto 95% and gave <b>"could not open connection host"
    if connected through look up connection</b>
    "msgserver/text/logon returned empty list of parameters" or user authentication failed.I tried all ways but failed.Please help me in this pretext by giving a solution other than reinstallation of Netweaver.
    I am Using NetWeaver`04 SP14
    Thanking you in advance.
    Regards
    Prabhat

    Hi Prabhat,
    Is your server up and running?  It sounds like that's the main problem.  If it's not up then you won't be able to login with the J2EE engine.  I had some trouble with SP14 in that the database service needs to be up and running before you try to use the SAP Managment Console to start the server.  Try shutting down the server, starting the windows service that corresponds to your database, and then restarting the server.
    Cheers,
    Steve
    If you find a post useful, please help keep the community going by setting a good example and rewarding the poster with points.

  • When I connect my iTouch to the laptop iTunes doesn't start. Help!

    I have to open iTunes manually and sinc it also manually. The automatically sinc boton is click also.
    Do you know why?

    have not plugged in since upgrading to leopard who decided not to have itunes recognize its lil' sis ipod Pina. I assume that's where it started. but now i am just trying to find the box to manually check automatically blah blah. can't find it yet.

  • Toshiba Satelitte A60-302 doesn't start, please help!

    First, hello! :-) I'm new to this forum, so welcome everybody.
    I have some problems with my A60-302, when I try to turn it on, nothing happens, only black screen and "Toshiba - in touch with tommorow" isn't showed. The leds seems to be normal, no signs of beeping or sth like that. I've tried to remove the battery for a while, also tried to turn it on without the battery, but it did'n work. I'd be greatful for any help.

    Hi!
    Ive got bad news for you. If you cant see Toshiba-Logo in boot-process there must be some hardware fault. You have to take your mashine to service.
    You can find a Toshiba Service Partner under:
    http://eu.computers.toshiba-europe.com/
    Support & Downloads

  • HT1725 i cant download the Garmin in app traffic it wont even start. plz help

    I have recently purchased the Garmin GPS app. (mainly by accident) but since i did i decideded to buy the in app traffic update but it wont start at all

    Phone could be damaged, take a trip to the apple store and buy an out of warranty iphone 4.

  • Macbook doesn't start up - Help Please?

    Hello,
    I have a Macbook Intel Core 2 Duo that I bought back in January 2007, OS X 10.4.11. Yesterday I was starting up my computer, but got no response from the power button. The battery was fully charged. Nevertheless I plugged in the power cord, but yet again, my Macbook would not start up. I have tried everything, but pressing on the power button just makes the light by the camera flash rapidly in green. I got my Mac to start after several hours of trying, but I would like to know where this problem is coming from because it is constantly occuring. Have any of you experienced the same thing?

    When you open System Profiler, do items in the "Overview" and "Hardware" section show as usual? Memory - all there? Diagnostics - passed? Serial-ATA's S.M.A.R.T. status - verified?
    First, backup your important data immediately before trying anything further.
    Your Mac does not need installed software to start up, also does not need an internal hard drive - therefore, have you tried inserting the original grey-labeled Install Disc 1 to see if/how it starts up to that disc when you hold down the "d" key to run the Apple Hardware Test?
    Starting up in that manner will bypass the internal hard drive and the installed software. Theoretically, it should always startup right away when starting up to the Install Disc 1. Any stated results obtained from running a fresh Apple Hardware Test?
    If your MacBook will not start up any better when trying with Install Disc 1, it probably has a hardware failure - perhaps the battery/power supply or a connector or cable...perhaps worse. The Apple Hardware Test may not recognize what the problem is, so don't rely on a no problem report if that's what it shows. If there is any error, write it down and pass that info along to the repair folks when you call them.

  • Flash installer doesn't run - plz help

    I download the Flash Installer and run it, and nothing happens. It is as if the program immeditately does an exit before it gets to the good part (installation!). I do not get the installation dialog, and I do not get an installation. I have tried running it as administrator, same result.
    Downloading from here: http://get.adobe.com/flashplayer/
    the install file I get is: install_flashplayer11x64_mssd_aih.exe (or install_flashplayer11x64_mssd_aih.exe or install_flashplayer11x64ax_gtbp_chrd_aih.exe ... not sure why different attempts gave me a different file ... the last one was downloaded via MSIE, the others Mozilla FF)
    OS: Windows 7 Home Premium (64 bit)
    Browser: Mozilla Firefox 11.0 (I did make one download attempt with MS Windows Internet Explorer 9.0.8112.16421 64 bit edition, same result)
    I have uninstalled Flash. Actually, it seemed from the Flash debugging site that to begin with I already had the latest Flash, but Flash videos on YouTube etc were not working. So I started by trying installation (didn't work, installer didn't run), then uninstalled Flash, then tried installation again (same result). Now I have no Flash at all, and I can't install it. I have also rebooted several times and retried, no success. And I have run the installer with Firefox closed, no success.
    I also just installed the Java update that Mozilla is insisting on for security reasons. That is my only guess for the initial cause of my problems, because my Flash was working yesterday (24 hours ago).

    This worked for the immediate problem ... I was able to run the installer and get Flash on. THANKS!
    I can confirm Flash is now reinstalled here: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html. This also confirms that it is version 11.2.202.228 for Windows 7 (64-bit).
    Now, unfortunately, I am right back were I started. I have Flash, but YouTube and the Daily Show tell me I need to have Flash installed and enable JavaScript in order to watch a video. Both are true, yet I cannot play a video (and I might add, the YouTube page just looks like crap, like something from the WWW of 1994).
    I now have the same video playing symptoms on both Mozilla FF and MSIE.
    Could it be them not me? This all worked 24 hours ago.

  • PLZ HELP: BB TORCH 9800: not able to start ,keep on rebooting after 70% booting. plzzz.. its urgent.

    Hi,
    i m using bb torch 9800,i installed viber app from bbworld .During instalation, it automaticaly went for restart.n till now it is rebooting everytime after every70% complition. its just like a do loop.
    1.i removed battery so many times kept back..but no way.
    2.i tried to start with safe mode for rebooting,but that also doesn't work.
    3.charged battery fully ,then inserted,stilll same condition.
    what to do? no way .i tried my best with these ideas what i got here on this foram,but didnt work.thats why i m writing seperately..PLZ HELP ,I M HELPLESS FROM LAST 7 DAYS...

    sorry bout the delay you can follow these instructions
    How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Plz help error while starting j2ee server

    I 'm working on Win xp professional operating system.
    While starting the j2ee server from command line
    with the command
    j2ee -verbose
    earlier it was working perfectly but from 2 days its not starting even...even i have reinstalled the j2ee software ....i think there is some internal problem which is not related to setting up the enviornment variables and incorrectly typing of command... plz help me as soon as possible.. i wil be thankful ....
    I am getting error message as follows
    C:\Documents and Settings\Sunita Khilnaney>j2ee
    java.io.IOException: The system cannot find the path specified
    at java.io.Win32FileSystem.createFileExclusively(Native Method)
    at java.io.File.createNewFile(File.java:690)
    at com.sun.enterprise.repository.ConfigurationImpl.getServerRepository(C
    onfigurationImpl.java:92)
    at com.sun.enterprise.repository.ConfigurationImpl.<init>(ConfigurationI
    mpl.java:45)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:170)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    J2EE server listen port: 1050
    java.io.FileNotFoundException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (T
    he system cannot find the path specified)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
    at com.sun.enterprise.server.J2EEServer.redirectStreams(J2EEServer.java:
    534)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    java.io.FileNotFoundException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (T
    he system cannot find the path specified)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
    at com.sun.enterprise.server.J2EEServer.redirectStreams(J2EEServer.java:
    534)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    java.lang.RuntimeException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (The
    system cannot find the path specified)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
    J2EE server reported the following error: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\sy
    stem.out (The system cannot find the path specified)
    Error executing J2EE server ...
    C:\Documents and Settings\Sunita Khilnaney>

    Hello sunita,
    do one thing put yoor j2ee server installation in a folder whose name doesn't contain space.
    As you can see there ia a space btwn Documents & and. btwn Sunita & Khilnaney
    C:\Documents and Settings\Sunita Khilnaney>j2ee
    put it in folder like c:\SunitaKhilnaney>j2ee or c:\Sunita_Khilnaney>j2ee
    I hope it'll solve your pblm.
    Thanks,
    Dinesh

Maybe you are looking for

  • Using Non BI database as source to Build SSAS cubes and SSRS reports .

    hi, I have a requirement where I have to use existing database(OLTP) as my source to the SSAS cubes and then to build the reports. Where for Cubes and Reports I uses SQL Server BI edition. But my existing source data will be in non BI database. My qu

  • Transportable tablespaces for migration and upgrade

    Hello All, I'm trying to find out some theory about transportable tablespace and upgrade in a single step. I've to move a DB from a Windows server to a Linux server. Win is running 10.1 and Linux 10.2 . It's possible to use RMAN to migrate the whole

  • WebLogic Issue: File too large

    Hi All, I am getting below error in logs while starting the WLS (10.3.5 on IBM AIX 6.1 using IBM JDK) AdminServer: ####<Nov 8, 2012 10:28:45 PM PST> <Notice> <Security> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'webl

  • How can I delete templates on numbers?

    First visit to Apple Support Communities - I have downloaded data from financial institution which includes the date formated, for example, Nov 6, 2012 after the spread sheet is opened with Numbers.  Using the inspector > cell > date > format "01/05/

  • AuthPermission doAsPrivileged hangs SJSAS 9.1

    We're running SJSAS 9.1_01 on JDK 1.5.0_14 on GNU/Linux. We deploy an application which uses Acegi. It needs the following permisson: permission javax.security.auth.AuthPermission "doAsPrivileged"; (if you don't give it it would crash saying so). The