WM: Error occurred during storage section search (FGWM05 001)
HI friends
i done GRN 101(movement type) with mb31 for production order ..based on TR Iam trying to create transfer order i have
the below error. where i missed the configuration
"Error occurred during storage section search (FGWM05 001)"
Message no. L3 041
Diagnosis
No storage area search has been defined for this material and this
storage type.
Procedure
Contact your system administrator! Note down the material and the
storage type listed within parentheses in the error message.
with regards
dinesh
Edited by: code acess on Jun 28, 2011 8:30 AM
Hi
In WM customizing Please check for your warehouse/Storage type combnation the storage section search is on and valid.
IMG>Logistics Execution>WM>Strategies>Storage section search
if there is no entry then maintain it. The nest error may be storage bin. Make sure that you create storage bin for whsno/storage type/storage section combination by using LS10 or LS01N)
Hope it helps
Karthik
Similar Messages
-
Error occurred during storage enumeration. The provider`s cache is empty.
Hello all,
I`m currently experimenting with Server 2012 and I faced an issue, while trying to play around with Storage Pools. My Server manager fails on refreshing disk volumes with the above mentioned error. More specifically:
Error occurred during storage enumeration.
Error occurred during enumeration of physical disk and storage pool associations: The provider's cache is empty. [Request = MSFT_SMDiskDriveToPool]
Error occurred during storage enumeration.
Error occurred during enumeration of physical disk: The provider's cache is empty. [Request = MSFT_SMDiskDrive]
There are 6 more errors with the same content, but for different things: Storage pools, Storage Pool capabilities; storage subsystem and pool associations;etc...
Also I see the same error in powershell:
PS C:\Users\Administrator> Get-PhysicalDisk
FriendlyName CanPool OperationalStatus HealthStatus Usage
Size
PhysicalDisk2 False OK Healthy Auto-Select
2 GB
PhysicalDisk3 False OK Healthy Auto-Select
2 GB
PhysicalDisk4 False OK Healthy Auto-Select
1 GB
PhysicalDisk5 False OK Healthy Auto-Select
1 GB
PhysicalDisk0 False OK Healthy Auto-Select
931.51 GB
PhysicalDisk1 False OK Healthy Auto-Select
931.51 GB
Get-PhysicalDisk : The provider's cache is empty. [Request = MSFT_SMDiskDrive]
At line:1 char:1
+ Get-PhysicalDisk
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (MSFT_SMDiskDrive:ROOT/Microsoft/...FT_PhysicalDisk) [Get-PhysicalDisk], C
imException
+ FullyQualifiedErrorId : 40003,Get-PhysicalDisk
I run Update-StorageProviderCache:
PS C:\Windows\system32> Update-StorageProviderCache -DiscoveryLevel Level3 -PassThru
Type Name
Manufacturer
SMP Storage Spaces Management Provider Microsoft
Corporation
with no luck.
What could be the problem. Could somebody also explain me what this cache is used for?
Thanks in advance.
BR,
Svilenin what you pasted you didnt run powershell as admin with "Get-PhysicalDisk" while with "Update-StorageProviderCache
-DiscoveryLevel Level3 -PassThru" you did run it as admin
Run powershell as admin and please see if that makes a difference for you.
MCITP:SA:EA:EMA2010:VA2008R2 -
Hello,
I'm getting the following error when I use the search in the Portal:
Error occurred during search: com.sapportals.wcm.WcmException: error: communication with preprocessor failed;index=teste,location=cdphl815:30203 (Errorcode 42)
That's probably an indexing error:
Indexing document failed. Preprocessor: failed (Errorcode 6800)
But I don't know what to do to fix this.
Please... help me!!
Thanks
LuisaHi Luisa,
It might help:
Trex Administration Tool:
http://help.sap.com/saphelp_erp2004/helpdata/en/23/92bd4016c0cc38e10000000a155106/frameset.htm
General TREX Configuration :
http://help.sap.com/saphelp_erp2004/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Post-Installation Activities :
http://help.sap.com/saphelp_erp2004/helpdata/en/8b/1cc83edf72e16be10000000a114084/frameset.htm
Hope it helps,
Yoav -
Hello Experts,
We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
We have checked in our backend and for all the talent specialist search results are showing successfully.
Anyone of you kindly help us to get this sorted out.
Thanks & regards,
SakthiHi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel -
iMessage worked fine on my Macbook until about two weeks ago. I can use iMessage for gMail, but my iCloud account is inactive and I get the error message "An error occurred during activation. Try again." when I try to log in with any apple ID. It works fine currently on my iMac and my iOS devices.
I have tried many suggestions, including checking the serial number, various time & date configurations, trying an alternate Apple ID, restarting, signing in and out of iCloud, and inspecting the keychain.This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. -
RC-00118: Error occurred during creation of database
adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Error 1935 an error occurred during installation of assembly component
I get this message when trying to install Lightroom 4.3
error 1935. an error occurred during installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE} hresult 0X800700C1
I've tried installing with antivirus software shut down. I've reset the file system transaction log. I turned off the .net framework v 3.0 in the programs and features section of control panel. The only thing I haven't tried is deleting the .net framework because the other articles were unclear as to exactly what and how to delete them.
Please help!that looks like an ms error.
attach a screenshot, if you're not sure. -
Error occurred during initialization of VM
im new to jdeveloper please anyone help me...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\reir\AppData\Local\Temp\trustStore9189074039610736238.jks -javaagent:../modules/org.eclipse.persistence_1.1.0.0_2-1.jar -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Error opening zip file or JAR manifest missing : ../modules/org.eclipse.persistence_1.1.0.0_2-1.jar
agent library failed to init: instrument
Process exited.This issue is usally caused by missing rt.jar. It's a good idea to manually unpack libraries.
Look for your java library directory (usually jre<version>/lib) .
If you can see rt.pack and can't see rt.ajr -
make the follwoing (I consider you save this to a script file then run it and your JAVA_HOME is correctly set and you're using some sort of UNIX):
---------------------------------cut---------------------------------
#!/bin/sh
JH=${JAVA_HOME:-"/usr/java/jre1.5.0_04"}
UNPACK_EXE=$JH/bin/unpack200
if [ -f $UNPACK_EXE ]; then
chmod +x $UNPACK_EXE
PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar"
for i in $PACKED_JARS; do
srcFile=${JH}/`dirname $i`/`basename $i .jar`.pack
dstFile=${JH}/$i
if [ ! -f $srcFile ]; then
printf "Error: Unable to find %s. Please, check out your installation.\n" $srcFile
exit 1
fi
$UNPACK_EXE $srcFile $dstFile
if [ ! -f $dstFile ]; then
printf "Error: unpack could not create %s. Please refer to the Troubleshooting\n" $dstFile
printf "Section of the Installation Instructions on the download page.\n"
exit 1
fi
rm -f $srcFile
done
else
printf "Error: unpack command could not be found. Please refer to the \n"
printf "TroubleShooting Section of the Installation Instructions on \n"
printf "the download page.\n"
printf "Please do not attempt to install this archive file.\n"
exit 2
fi
---------------------------------cut--------------------------------- -
Error occurred during initialization of VM. Could not reserve enough space
Dear All,
I am trying to install SAP NetWeaver 7.0 SR2 SP9 on Oracle 10.2 and platform is Windows 2003 32 bits. While installing, in t he restarting the JAVA Instance step, server0 node is getting shutdown. When I further analyzed dev_server0 log, I could get below useful information:
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 6008] JLaunchIAbortJava: abort hook is called
[Thr 6008] **********************************************************************
*** ERROR => The Java VM aborted unexpectedly.
*** Please see SAP Note 943602 , section 'Java VM crashes'
*** for additional information and trouble shooting.
[Thr 6008] JLaunchCloseProgram: good bye (exitcode = -2)
I referred the note mentioned above and it inturn referred to note# 940893. I followed many other sap notes also. However my above problem did not solve yet. I have checke my JAVA SDK version also. It is j2sdk1.4.2_11 and seems to be fine. My systems memory is 3 GB and I gave 20 GB as Virtual memory. I dont think that it should be a memory problem. However somewhere I am lost and can not get the grip over the problem to resolve it.
May I request all of you to kindly help me on above issue? Please let me know if you need any more information.
Waiting for your kind replies.
Regards,
FaisalDears,
Thank you very much for your replies. The heap size was 1024. I changed it to the below:
Heap Size=512 (earlier 1024)
Changed below paramters in configtool:
-Xmx512m (earlier 1024)
-Xms256m (earlier 1024)
Hope this information will be helpful to others as well.
Once again, I thank both of you to guide me in proper directions.
Regards,
Faisal -
Hello all,
I ran into some error during installation. And I need your help in solving this problem. The error occurs during Step Configure (Configuration assistant "Repository Configuration" has failed) and the Repository Configuration in the Installation Progress Details view.
And the error is shown below is from ViewLog and from the terminal where I launched runInstaller. Thank you all in advance for your helps.
ViewLog:
INFO: oracle.sysman.top.oms:Completed Prereq check
INFO: oracle.sysman.top.oms:The plug-in Plugins Prerequisites Check has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Repository Configuration
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.RepositoryConfiguration
INFO: oracle.sysman.top.oms:Classpath = /test/vince/em_install/oem_mgr/oms/sysman/jlib/emprereqkit.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emCoreSDK.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/omsConfig.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emcore_client.jar:/test/vince/em_install/oem_mgr/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcucommon.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emagentSDK.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcu.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Inside perform method
INFO: oracle.sysman.top.oms:Running the Schema Action...
INFO: oracle.sysman.top.oms:Setting required properties
INFO: oracle.sysman.top.oms:REPOS_USER: SYSMAN
INFO: oracle.sysman.top.oms:SYS_USER: SYS
INFO: oracle.sysman.top.oms:CONNECT_STRING: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:ORACLE_HOME: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:mgmtTabLoc :
INFO: oracle.sysman.top.oms:confDataTabLoc :
INFO: oracle.sysman.top.oms:defaultDataFileLoc :
INFO: oracle.sysman.top.oms:ad4jDataTabLoc :
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:The required parameters are set for schemamanager
INFO: oracle.sysman.top.oms:Starting both repos upgrade and transx loading in parallel
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: create oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:create_process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:The command run for transx is /test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) -action transx -repos_user SYSMAN -dbUser SYS -mwHome /test/vince/em_install/oem_mgr -mwOraHome /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:processing arguments
INFO: oracle.sysman.top.oms:compiling arguments for validation
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms: Enter SYSMAN repository password :
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:Verify :
INFO: oracle.sysman.top.oms:Enter password for: SYSMAN
INFO: oracle.sysman.top.oms: done checking required user credentials...
INFO: oracle.sysman.top.oms:done creating arguments...
INFO: oracle.sysman.top.oms:creating logger..
INFO: oracle.sysman.top.oms: Connection exception in action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: no action logger file name from previous session
INFO: oracle.sysman.top.oms: action logger filename after search: emschema.log
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:already exists: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:oracleHome: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:connect_string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:done connection validation without error
INFO: oracle.sysman.top.oms:action to perform is: transx
INFO: oracle.sysman.top.oms:action to be performed:TRANSX
INFO: oracle.sysman.top.oms:action is transx - non RCU based action
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log.TRANSX
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms:newly created: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:process_id:132hgzixoqx34
INFO: oracle.sysman.top.oms:Initialization...
INFO: oracle.sysman.top.oms:Driver: oracle.jdbc.driver.OracleDriver
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:transx_retCode:255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-65096: invalid common user or role name
File:/test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
Statement:CREATE USER SYSMAN IDENTIFIED BY ****** DEFAULT TABLESPACE MGMT_TABLESPACE QUOTA UNLIMITED ON MGMT_TABLESPACE TEMPORARY TABLESPACE TEMP
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Terminal:
PLUGIN_DEP_LIST={}
PLUGIN_PURGE_LIST={}
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 5
Percent Complete: 30
Percent Complete: 55
Percent Complete: 80
RCU-6130:Action failed - RCU-6134:Error while trying to execute JDBC action.
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Connected As : SYS
RCU Logfile : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/rcu.log
RCU Checkpoint Object : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component Status Logfile
EM Repository Creation Configuration Failed No log created
EM Repository Init Configuration Failed No log created
EM Repository Common Failed /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/em_repos_common.log
Repository Creation Utility - Create : Operation CompletedYou are using DB12 as EM repository which is not certified. From the log, ORA-65096: invalid common user or role name , some people have reported similar issue while using DB12 as their repository.
If this not the case then log an SR with oracle support and upload the logs:
- $ORACLE_HOME/sysman/log/schemamanager zipped
- $ORACLE_HOME/cfgtoollogs/ zipped
- central inventory logs -
Problem: An error occured during the uploading process.
Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png -
An error occurred during olap API metadata retrieval. This is probably caus
this is what i have done so far. i really nead some help asap!!!
1. Install Oracle 9i Release 2 (9.2.0.1) Enterprise Edition with the General purpose database configuration (Data warehouse works as well). At the end of the installation I chose the password management button to change passwords for the few necessary accounts: SYS, SYSTEM, OLAPSYS, SH.
2. Download the p3948480_9206_WINNT.zip from metalink, the 9.2.0.6 patchset
3. Shut down any existing Oracle9i database instances with normal or immediate priority. Stop all listener and other services running in the Oracle home directory where you want to install the patch set.
4. unzip the content of thepatch to a temp directory
5. start setup.exe under the temp directory (it will start the Oracle Universal installer 10.1.0.3)
6. install the patchset to your Oracle home, selecting the source in the temp_dir\stage\products.jar file
7. review carefully the post-installation tasks for the patchset:
Review the following sections before upgrading a database (quote from the patchset html readme):
8.2.1.1If JServer is part of the installation ensure that there is at least 10 MB of free space allocated to the SYSTEM tablespace.
8.2.1.2 Check XDB Tablespace Size
For RAC installations, ensure that there is at least 50 MB of free space allocated to the XDB tablespace.
8.2.1.3 Set the SHARED_POOL_SIZE and JAVA_POOL_SIZE Initialization Parameters
Set the value of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters as follows:
Start the database:
SQL> STARTUP
If necessary, enter the following command to determine whether the system uses an initialization parameter file (initsid.ora) or a server parameter file (spfiledbname.ora):
SQL> SHOW PARAMETER PFILE;
This command displays the name and location of the server parameter file or the initialization parameter file.
Determine the current values of these parameters:
SQL> SHOW PARAMETER SHARED_POOL_SIZE
SQL> SHOW PARAMETER JAVA_POOL_SIZE
If the system is using a server parameter file:
If necessary, set the value of the SHARED_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET SHARED_POOL_SIZE='150M' SCOPE=spfile;
If necessary, set the value of the JAVA_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET JAVA_POOL_SIZE='150M' SCOPE=spfile;
If the system uses an initialization parameter file, if necessary, change the values of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters to at least 150 MB in the initialization parameter file (initsid.ora).
Shut down the database:
SQL> SHUTDOWN
8.2.2 Upgrade the Database
After you install the patch set, you must complete the following steps on every database associated with the upgraded Oracle home:
Log on as a member of the Administrators group to the computer where the Oracle components are installed.
Use SQL*Plus to login to the database as the SYS user with SYSDBA privileges:
sqlplus /NOLOG
CONNECT SYS/password AS SYSDBA
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
Restart the database:
SQL> SHUTDOWN
SQL> STARTUP
Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are accessed for the first time. This step is optional but recommended.
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql
12. Install JDeveloper 9.0.4 (download it from OTN and just unzip it in a directory ... it doesn't require an oracle home)
13. Install BI Beans 9.0.4 (download it from OTN as well), run the setup.exe that comes with it and in the destination oracle home select the directory where you installed JDeveloper and give an oracle home name to it)
14. Install the BIBDEMO schema:
Create a directory on the computer that is running the Oracle9i database. This install_home directory is the location to which you will upload the data files that are required to build the BIBDEMO schema.
On the computer where BI Beans is installed, locate the bibeans_home\bibdemo_schema folder (where bibeans_home is the root folder of your BI Beans installation). Copy all of the files found in this folder to the install_home folder on your server machine.
Open a DOS prompt and navigate to the install_home folder.
Run bibdemo.bat to install the schema, using the following syntax:
bibdemo.bat <path to Oracle database files >
For example, for an instance named my9iService, enter the following:
bibdemo.bat D:\OraHome1\oradata\my9iService
You are prompted for the password for the sys as sysdba user.
The script takes approximately 15 minutes to run, depending on the machine specifications. It is normal to see some error messages while the script is running. In addition, when materialized views are being created in the database, the script will appear to stop; this is also normal. A clear message will tell you when the script has completed.
The log files (*.log) that are generated by the installation script are stored in the folder from which you ran the script.
Here's what
bi_checkconfig.bat -h ana -po 1521 -sid proiect -u bibdemo -p bibdemo -q
returned:
BI Beans Diagnostics(v1.0.2.0) 2/28/05
===============================================================================
JDEV_ORACLE_HOME .......................... = E:\OraDS
JAVA_HOME ................................. = E:\OraDS\jdk
JDeveloper version ........................ = 9.0.4.1.1.1436
BI Beans release description .............. = BI Beans 9.0.4 Production Release
BI Beans component number ................. = 9.0.4.23.0
BI Beans internal version ................. = 2.7.5.32
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.4.0
JDBC JAR file location .................... = E:\OraDS\jdev\lib\patches
Database version .......................... = 9.2.0.6.0
OLAP Catalog version ...................... = 9.2.0.1.0
OLAP AW Engine version .................... = 9.2.0.1.0
OLAP API Server version ................... = 9.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in bibdemo
OLAP API JAR file version ................. = 9.2
OLAP API JAR file location ................ = E:\OraDS\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 2
Number of metadata measures ............... = 12
Number of metadata dimensions ............. = 8
Testing sample query for measures and dimensions
(S=Schema, C=Cube, M=Measure, D=Dimension)
1/21) Measure Budget ................... = Successful
S=BIBDEMO, C=BIBDEMO_BUDGET_CUBE, M=BUDGET
2/21) Measure Actual ................... = Successful
S=BIBDEMO, C=BIBDEMO_ACTUAL_CUBE, M=ACTUAL
3/21) Measure Close Price .............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_CLOSE
4/21) Measure Open Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_OPEN
5/21) Measure Low Price ................ = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_LOW
6/21) Measure High Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_HIGH
7/21) Measure Stock Volume ............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_VOLUME
8/21) Dimension Division ............... = Successful
S=BIBDEMO, D=DIVISION
9/21) Dimension Line Items ............. = Successful
S=BIBDEMO, D=LINE
10/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
11/21) Dimension Day .................... = Successful
S=BIBDEMO, D=DAY
12/21) Dimension Stock .................. = Successful
S=BIBDEMO, D=STOCK
13/21) Measure Costs .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.COSTS
14/21) Measure Promotion ................ = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.PROMO
15/21) Measure Quota .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.QUOTA
16/21) Measure Units .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.UNITS
17/21) Measure Sales .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.SALES
18/21) Dimension Channel ................ = Successful
S=BIBDEMO, D=CHANNEL
19/21) Dimension Geography .............. = Successful
S=BIBDEMO, D=GEOGRAPHY
20/21) Dimension Product ................ = Successful
S=BIBDEMO, D=PRODUCT
21/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
Metadata output location .................. = E:\OraDS\bibeans\bi_checkconfig\bi
_metadata.txt
To interpret this output, see the "Displaying Information about your Oracle9i Bu
siness Intelligence Beans Client Configuration" technical note, whose file name
is bi_checkconfig_tn.html
These diagnostics are captured in: E:\OraDS\bibeans\bi_checkconfig\bi_checkconfi
g.xml
now: i have created some new stuff:
1). user ana with roles:
-dba
-olap_dba
-connect
-resource
(same roles as bibdemo)
2).schema ana; tablespace ana (permanent), tablespace anatemp (temporary)
3).i have created some relational tables and i have inserted some data in them:
agent, aparat (cofee machines), beneficiar (clients), locatii (city), raport (REPORT), timp (time), tipaparat (types of cofee machines), tipbautura (products : types of cofee made by all the cofee machines), zone (state)
4). one fact table with:
- sold cantity (measure)
- id_bautura (id_product) primary key
- id_timp(id_time) primary key
- id_beneficiar (id_client) primary key
- id_agent primary key
- id_locatie (id_city) primary key
- id_aparat (id_cofee_machine)primary key
i have inserted some data also
5).dimensions:
AGENT_DIM :levels: codag(id_agent), numeag (agent name), telefag (agent phone number)from relational table agent
BENEFICIAR_DIM :levels: codben (id_client), denumire (client name), adresa (adress) ,codl (id_city) etc from relatinal table beneficiar (clients)
TIMP_DIM :levels: id, year, month from relational table timp (time)
TIPBAUTURA_DIM :levels: codbautura (id_product), numebautura (product name)from relational table tipbautura (products)
ZONA_DIM :levels: codzona (id state), numezona (state name), codoras (id city), numeoras (city name) with ierarhy id_state---id_city FROM 2 RELATINAL TABLES CITY AND STATE!!!!!!!! AM I ALOUD TO DO THAT?????
DO I NEED TO CREATE A DIMENSION FROM ONLY ONE TABLE???????
APARAT_DIM :LEVELS: codben (id client), codtip (id machine type), denumireap (machine type name), matricolap ((machine id) (FROM 2 RELATIONAL TABLES ALSO!!!!!!! FROM TYPES OF COFEE MACHINES AND COFEE MACHINES!!!!!
6). I HAVE NOW CREATED THE CUBE FROM THE FACT TABLE AND WITH ALL THE DIMENSIONS
7). summary advisor wizard NOT WORKING! IT NEVER STOPS!
8). I HAVE CREATED ALSO ONE materialized view FOR THE CUBE
IF I COMPILE IT... NO ERRORS
9). CUBE VIEWER NOT WORKING!!!!!!! IT ONLY APEARS A BELL!!!
NOW IF I RUN BI_CHECK CONFIG ON ANA AND ALSO ON BIBDEMO!!!!!!!!!!!!
IT SAYS:
1) An error occurred during olap API metadata retrieval. This is probably caused by inconsistent metadata.
============================================================================
oracle.express.ExpressServerExceptionError class: Unknown Error
Server error descriptions:
INI: System failure, Generic at TxsOqConnection::getDefaultDatabase
at oracle.express.olapi.data.full.ExpressDataProvider.getMetadataProviderInterface(ExpressDataProvider.java:1003)
at oracle.olapi.metadata.MetadataFetcher.initialize(MetadataFetcher.java:73)
at oracle.olapi.metadata.MetadataFetcher.<init>(MetadataFetcher.java:45)
at oracle.olapi.metadata.BaseMetadataProvider.<init>(BaseMetadataProvider.java:47)
at oracle.olapi.metadata.mdm.MdmMetadataProvider.<init>(MdmMetadataProvider.java:130)
at oracle.express.olapi.data.full.ExpressDataProvider.getDefaultMetadataProvider(ExpressDataProvider.java:964)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.getMdmMetadataProvider(MDMMetadataDriverImpl_92.java:1133)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.attach(MDMMetadataDriverImpl_92.java:810)
at oracle.dss.metadataManager.server.drivers.mdm.MDMMetadataDriverImpl.attach(MDMMetadataDriverImpl.java:125)
at oracle.dss.metadataManager.server.MetadataManagerImpl.buildObjectModel(MetadataManagerImpl.java:1092)
at oracle.dss.metadataManager.server.MetadataManagerImpl.attach(MetadataManagerImpl.java:969)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:876)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
I TRYED ALSO WITH USER ANA WITH ROLES:
- DBA
- CONNECT
-RESOURCE
- OLAP_USER
NOT WORKING! AND ALSO BIBDEMO NOT WORKING!
WHAT AM I MISSING? SHOULD I USE AW MANAGER? OR DO I NEED TO CREATE AN AMNALITIC WORKSPACE???
WHAT ARE THE STEPS TO CREATE A GOOD METADATA????Hi,
The issue here is if the whole catalog is corrupt or just one schema. So to try and determine the status of the catalog I would try:
1) Using OEM remove all the objects you created
2) I presume you created your database using the Database Configuration Assistant? You should have used the warehouse template
3) Make sure the following accounts are unlocked and also not expired : SH, OLAPSYS
4) Make sure the password for the SH schema is SH
5) Make sure the password for the OLAPSYS account is manager
6) Install the BIBDEMO schema that is shipped with BI Beans. This in the jdev_home/bibeans/bibdemo_schema
The installation process will remove SH schema from the OLAP catalog.
7)Once this is installed use JDeveloper to see if you can create a crosstab or graph.
8) If the BIBDEMO schema works try creating your new schemas one at a time.
9) Make sure the if you define the a dimension as type time it has END_DATE (column type DATE) and TIME_SPAN (column type number) defined. Otherwise don't define the dimension as type time.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans -
FATAL ERROR occurred during installation
Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
Error occurred during WM processing for posting change delivery
Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
The indicator AUFER from the delivery type contradicts the
storage location constellation that was determined by the
WM system.
TVLK-AUFER = '<VAR2>'
WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...GopiHi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir -
Error occurred during character conversion in SXMB_MONI
Hello Experts,
Good Day!
I would like to seek your help here. When i used tcode SXMB_MONI to search for messages i get this error : Error occurred during character conversion.
So far no problem with the program. Its work for all other dates. Just for one particular day and specific time period, im geting this error.
Does anyone know what is this error means? Please reply..
Thanks for your help.
Looking forward for ur replies..Hi Presheela,
Basically this problem occurs when ur payload contains any special characters like '&' ,'>'...etc .So you have to take care of how to deal with these characters in XI.
Refer the following documentation:
How to Work with Character Encodings in Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Vinod.
Maybe you are looking for
-
While trying to use iTunes on my iPad, it keeps closing itself. Why?
While trying to search on iTunes, it just keeps closing itself. Why?
-
Pipeline Materials: Purchase Price Variances
Hi, Can anybody please guide me on how to handle Purchase Price Variances of Pipeline Materials. As pipeline materials doesn't have any POs and invoices, how is it possible to post the PPV so that the variances are recorded in material ledger. Best R
-
TS3899 What is the current "best way" to use Outlook/Hotmail on the iPad?
I've learned through the recent Outlook/Hotmail problems that, on some devices, the best way to insure sync is to use Hotmail through the Outlook App. What is the best way currently on the iPad?
-
The Mouse window in my System Preferences doesn't give me the option to assign the buttons
My mouse has suddenly decided over the weekend to assign the middle button to expose. It's bloody annoying because it's far too sensitive and every time I try to left click it now shows me all the open windows. I had turned the middle button off when
-
Our family has 2 iPads, 2 iPhones and 1 iPod touch. One of the iPads is not listed in devices in find my iPhone app. This app is on all devices we own. In the app on my phone it lists "this device" but on the ipad that's missing the "this device" is