Work center & operation

Hi,
Please clarify my following issue:
We are having Two plants which are controlled by one shift incharge, Each plants has one operator, Each plant has permanent workers and has contract workers.
So please confirm where should I allocate operator in operation 1, 2 & 3. And also confirm where should i mention shift-in-charges as he is common for both plants.
Refer below screen shot for more clarity.

Hi,
You can enter shift in charge in Person responsible field in basic data tab in work center..
Assign the operator details in HRMS data as shown below in work center...
For this you need to have HR module implemented in your system...take the help of HR consultant for the employee details and then assign them in the work center...
Thanks
Kumar

Similar Messages

Can a PM work center operation be split without assigning to individuals?

We have a requirement to split the work time of a PM operation into more than one non-consecutive time period. For example a maintenance trade work center containing 3 individuals is required to perform an operation that takes 40 hours. Due to the plant schedule the work will be carried out in 20 hour segments. 20 hours in week 5 and 20 hours in week 7. Can this operation be dispatched as a split without assigning the splits to individuals in the work center?
We are using: SAP Appl Release 470 and
SAP R/3 Enterprise PLM, SCM, Financials Release 110 and the latest support packs.

Question is being posted to EAM Forum.

Factory Calendar and Work Center

Dear All
I am confused between factory calendar and work center working. Kindly guide me what factory calendar does and what work center does?

Hello,
Factory Calander :-- Factory calendar contain company specific dates such as alternate working Saturdays, Plant shutdown etc.
You can create your company factory calendar via transaction code 'SCAL'.
Assignment of the factory calendar by plant is done in transaction code 'SM30 - V_T001W'.
An example of a SAP application that uses the factory calendar is the SAP MRP modules.
Assuming that you have a specified an alternate working Saturday, MRP will postponed the planned orders to the next working day if it happened to falls on a non-working Saturday.
Work Center :--
Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
t-code-- CNR1 - Create
for more information go to this link
http://help.sap.com/saphelp_smehp1/helpdata/en/40/8ac473d40943ddb23def12bdb33437/content.htm
Thanks

Changing operations work center during creation of PM order

Hi all,
I am looking for BADI or EXIT in order to change operationS work center which created from maintenance calls.
Does anyone know such possibility?
Assaf

Assaf,
Have a look at BADI IWO1_TL_INTEGRATION2.
Also see [OSS Note 925072|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925072]
Which system are you running?
PeteA

PM Order - Change "Work Center" on operations to "Main Work Center"

Hi Experts,
We have prepared a tool for client, which create Maintenance Plan and order in the background.
The order created is having "Main Work Center" defined at header and "Work Center" at the operations level. In the current scenario the "Main Work Center" and "Work Center" are different say 'ABC' & u2018XYZu2019.
Client has the requirement that work center maintained at operations should be same as the main work center.
We need to implement the solution to take care of work center to be same as main work center while creation of the order in the background.
Has anyone worked on the similar requirement before?
I checked for existing USER EXITS for IW31/32/33 and found only one IWO10012. This doesnu2019t seem to be much useful.
Please suggest any possible solution.
Thanks,
Ankur Sharma

Hi Tilak,
Thanks for the response. The current situation is that we are creating the order in background using the Z-program. The scenario is creating order with operation entries having work center not equal to the main work center.
I am not functional, so just talking in terms of technical terms.
Is there a way the work center at operation level can be changed to main work center in background?
Thanks,
Ankur Sharma

PM Order - Change operations Work Center to Main Work Center

Hi Experts,
We have prepared a tool for client, which create Maintenance Plan and order in the background.
The order created is having "Main Work Center" defined at header and "Work Center" at the operations level. In the current scenario the "Main Work Center" and "Work Center" are different say 'ABC' & u2018XYZu2019.
Client has the requirement that work center maintained at operations should be same as the main work center.
We need to implement the solution to take care of work center to be same as main work center while creation of the order in the background.
Has anyone worked on the similar requirement before?
I checked for existing USER EXITS for IW31/32/33 and found only one IWO10012. This doesnu2019t seem to be much useful.
Please suggest any possible solution.
Thanks,
Ankur Sharma

Hi,
The work Center entered by default comes in operation work center, u can do validations while saving the Order :-using user exit : IWO10009 PM Order: Customer Check for 'Save' Event.
regards
pushpa

User exit/Badi for changing operation work center based on service product

Hi,
I have an requirement to change the operation work center based on the service product in IW31/IW32 transaction. I am using the BAdi 'IM_SM_BADI_READT399A' for changing the main work center. It changes all the operation work centers except the first one. But I need to change it all the operations.
Thanks in Advance.

I am using the enhancement spot 'IWO1_TL_INTEGRATION2' for changing the first operation work center

Tables for Basic end date and work center for operation

Hi!
I need table name to fetch the basic end date of a maintenance order and maintenance work centers with respect to each operation in maintenance order.
Regards,
VM
Edited by: V M on Jul 20, 2010 7:22 AM
Edited by: V M on Jul 20, 2010 7:35 AM

Hi VM,
Input is Order Number (AUFNR).
You can find the Basic End date of Order in Table AFKO, filed is GLTRP.
For work center in Operations, you can use the Table AUFPL from AFKO.
Pass this AUFPL in AFVC and get the ARBID.
Then pass this ARBID to CRHD Table as OBJID, and get the work Center (ARBPL)
Regards,
MLN Prasad

Operation number and work center

I'm looking for the link between inspection plan/recipe header and operation at table lavel.
Reason: I have two inspection plan number with same group number but both has different counter and each has 4 operation and each operation has different work center.
Now I can get header info in PLKO and operation level info in PLPO table. From PLKO I can pass PLNTY and PLNNR in PLPO table but this gives me 8 entry in PLPO table (4 for 1st group counter and 4 for 2nd counter).
So my question is how to differentiate 4 operation of each inspection plan header. Even same issue facing at recipe level.
I can't find any table. Do we have any BAPI?

Detailing the above reply through SQVI.
The Join.
Selection Screen
The output
If you need you may have Header table (PLKO) also in the join to have more details.
Jogeswara Rao K

How to create operations without entering a performing work center

How to create operations without entering a performing work center ? which control key should i select ?

Hi
QM01 is control key used for all the task lists of Quality.
there is no such a configuration associated with control key & usage of work center.
Work center is used for the activity capturing perpose & control key is to control operations.
I hope this is clear.
Entering a work center is totally depends on the scenario & not control key.
Regards
Sujit

Work center design and operation confirmation

Hi All,
In my scenario im grouping the similar m/c to a work center
say for ex. 4 lathes m/c into a single work center as LatheALL and also the indiv cap as 4
my customer wants the traceability in which m/c the job is done
So i had designed in such a way that
1 LatheALL -4 cap(this will be additional wc)
2. lathe1 - 1cap
3.lathe2 - 1cap
4.lathe3-1cap
5.lathe4-1cap
in the routing only latheALL will be given., this will help customer in planning
when going for operation confirmation i will give confirmation for that operation and will confirm as lathe1or lathe2 or etc.. this will help prodn dept for traceability in which m/c the work is done
this is method i have informed to client .,
pls advice is this approach is correct ?
also suggest by giving confirmation for another work center will the capacity for the original work center will be reduced
Regards
Anand Srinivasan

Hi Anand,
this is method i have informed to client .,
pls advice is this approach is correct ?
yes, during confirmation time to enter the orginal actual work center, this suitable for your client requirement, do the settings for OPK0 - change the confirmations parameters (0410 or 0420)
Regards,
Sankaran

More than one work center for one operation

Hi Experts,
Is it posssible to assign more than one work center to one operation,in a maintenance order?
for example if head fitter and helper has executed maint.activity,how we can do this
Thanks in advance
Regards
Prashil

Dear,
You cannot assign more then one workcenter to a one operation.
But you can assign to a sub operation,i.e to operation one workcenter and to suboperation anotherworkcenter.
For Sub-operation:
Go to task list change >>> Operation tab.
Let say your first operation number is 0010. Then below it for next operation change operation number to 0010 and next to it there is field for sub-operation give there number 0001 or 0010 as per your requirement. Select suitable control key and work center, give description and press enter. your sub operation 0001 will be created for operation 0010.
I hope it will solve your query,
Thanks,
Mohit

SCOM 2012 System Center Operations Manager has stopped working when adding Web Console.

I am trying to ad the Web console to one of my Management Servers but at the point where it asks what website to use it fails with the "System Center Operations Manager Setup has Stopped working error.
This is the included information.
Problem Event Name: CLR20r3
Problem Signature 01: setupchainerui.exe
Problem Signature 02: 7.0.9538.0
Problem Signature 03: 509042f2
Problem Signature 04: System
Problem Signature 05: 4.0.30319.18022
Problem Signature 06: 506a7689
Problem Signature 07: 1cf5
Problem Signature 08: 72
Problem Signature 09: System.UriFormatException
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 79c6
Additional Information 2: 79c63d7b6daeea05a42903612b7137d2
Additional Information 3: 88ec
Additional Information 4: 88ec54f8fa758d8069cdb2ad5cd91e2b
The only error I get in the log file is this.
Error: :Error:IsReportingValidToInstall failed SRS instance not provided
I don't understand why I would be getting an SRS error, our reports run fine.
Thanks,
Gary

Hi Gary,
Did you end up finding a solution to this issue? The GUI and silent/command line installer are failing for me in the same spot.
App Log Errors:
Application: SetupChainerUI.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException
Stack:
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(System.Exception)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.Common.Internal.SdkChannelObject`1<Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService>)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.ManagementGroupInternal)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(System.String)
   at Microsoft.SystemCenter.Essentials.SetupFramework.WebConsoleSite.GetValidationProperties(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
Faulting application name: SetupChainerUI.exe, version: 7.0.9538.0, time stamp: 0x509042f2
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
Exception code: 0xe0434352
Fault offset: 0x00000000000043c8
Faulting process id: 0x638
Faulting application start time: 0x01cf9a697847d9c8
Faulting application path: C:\Users\szb\AppData\Local\SCOM\SetupChainerUI.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: c52d5d75-065c-11e4-80c2-00155dcb0b37
Faulting package full name:
Faulting package-relative application ID:

Work center's description copy automatically in operation Routing

Hi all,
Could anyboy tell me where point of spro is to customize that work center's description is copied automatically in the operation Routing's description?
I try to search for it but I don't find it still.
Thanks in advance

Hi,
A suggestion:
In CA10, create a key say Z1 & give the description same as work center's description.
Now go to CR02 & for the work center in default values tab, assign the key to the field Standard Text key.
Now when you create a routing which uses this work center, the operation description will contain the work center description.
Regards,
Vivek

Can you have multiple Rates within one Work Center with multiple operations

We have a work center called Pipeshop. Within the Pipeshop we have multiple operations such as Welding, Threading, Cutting, Grooving etc. Each of these operations have a different cost assoicated with them. How can you have different cost for these operations?
Thank you,
Loretta

Hi,
For this case you need to do following activities.
1 Create individual activity accoding to requirement, that will be used for costing.
2 Activity planning w r t work center. In this cost per unit is declaring.
3. Create Routing and modify the default activity type, w r t required activity type, suitable to operations.
Now Order is referring the activity type, refered in Routing rather than, work center.
Regards
Gururaja Hebbar

Work center & operation

Similar Messages

Maybe you are looking for