Work Permits - WCM

Dear WCM experts,
I need some helps.
I would like to know how can I to edit a subscreen of work permits in Work Clearance Management. I want to edit subscreen 8300 e 8400 and others. How can I do this?
In time, I would like to know how exchange and add the work or requirements of Work Permits. I saw the work Work #17 and requeriment Requirement #23, and I would like to change its descriptions. How can I do this?
Thanks
Alexandre Sebe

Greetings Peter,
I believe your requirement is that:
no Approvals can be given on the WCA, until the WCD is in Tagged status ETG at least
(and can have the relevant Approval?)
To achieve this, you must define a Cross-Document Approval Process and an Approval Hierarchy.
Create an approval such as "Tagged" in IPMD and assign it to the WA and WD objects under SPRO > Plant Maintenance and Customer Service > Work Clearance Management > Approvals > Assign Approval
Create this Approval as "Mandatory", "Copy Automatically", "Issue Automatically" in IPMD.
Under same parent node, Define Hierarchy for Approvals in such a way that the other Approvals you want to grant after Tagging only have a hierarchy level higher than "Tagged".
Under same parent node, define Cross-document Approval Process, assigning the Approval "Tagged" to WA and WD, marking it as relevant to the process and set the process direction as going down from WA.
This should allow you to meet this requirement, I think.
You could also look at the node SPRO > Plant Maintenance and Customer Service > Work Clearance Management > Approvals > Block Issuing of Approvals > Define Dependent on System Status
but I think it does not check the status cross-document, which is what you require.
N.B. I think that actually if you have access to an IDES system, looking at the WCM setup for Plant 1000 there might be very helpful to you.
More useful info for you:
Work Clearance Management (PM-WCM) - SAP Library
Approvals - Work Clearance Management (PM-WCM) - SAP Library
Configurations necessary for WCM
I hope you do find this useful and come back with any further questions or issues.

Similar Messages

  • Where we authorized the assigne work permits

    Dear Experts,
    how i can authorized the assigned work permits? while creating the maintenance order i assigned the work permit and saved it , now order status was created status. i select the condition as if permit not authorized dont release the order. now where i can authorized the permit , how the permit authorized person see the work permits? how he knows which order have the work permit? please explain me with example. and tell me the how many t.codes are available in standard sap relevant to workpermit.
    thanks & regards
    Jalu

    Dear Jalu,
    Are you using WCM to generate work permit?
    If so the authorisations related to WCM function codes are assigned in object WC_FCODE
    Regards
    Kannan

  • Work permits

    hi,
    Can any body suggest me, how to handle permits with checklist.
    Here is an example. I attached hot work permit in maintenance order. Before issuing hot work permit, he has to check some check points (Say 20 points which are standard, like oxygen level, nearest fire extinguisher etc..), if atleast 10 to 15 points satisfy then he issue the permit.
    And these check points should trigger automatically, at the movement of assignment of permit in the maintenance order and want print out also for the above check list.
    Pl suggest if any alternative solution also. Pl reply its an urgent requirement.
    Thanks,
    Venkat

    Dear ,
    There is link u can make between Pm activity type and permit.
    1st thing go in TC CL02 and click the tab characteristics and define ur characteristic take class type 049
    ELECTRICAL_WORK     Maintenance activity type     CHAR     3     0
    ESCAVATION_WORK     Maintenance activity type     CHAR     3     0
    WORKING_AT_HEIGHT     Maintenance activity type     CHAR     3     0
    HOT_WORK     Maintenance activity type     CHAR     3     0
    MECHANICAL_WORK     Maintenance activity type     CHAR     3     0
    ELECTRICAL_ESCAVATION     Maintenance activity type     CHAR     3     0
    HOTWORK_WORKINGATHEIGHT     Maintenance activity type     CHAR     3     0
    HOTWORK_ELECTRICALWORK     Maintenance activity type     CHAR     3     0
    MECHANICAL_ESCAVATIONWORK     Maintenance activity type     CHAR     3     0
    ELECTRIC_ESCAVATION_HOTWORK     Maintenance activity type     CHAR     3     0
    ELECTRIC_HEIGHTWORK_HOTWORK     Maintenance activity type     CHAR     3     0
      above are activity type defined as characteristics in permit class  take class type 049
    make the PM activity type as mandatory feild if u dont wanna permit for perticular order define one Pm activity like as general work which shud not be define in charcteristic of permit class. so ur order can be process without permit as well
    other issue that ur triggering points shud be define in smart form den u can fill it manual that triggering like oxygen level so on in smart form it self. after print out u can mention on the print out level or other parameters. or samrts forms it self provide it enetr the value for parameter in system
    reward with point if u get ur ans
    regards,
    Rakesh
    Edited by: rakesh mane on Feb 14, 2008 11:47 AM

  • CQ WCM not working locally

    I have configured CQ 5.5 locally on my machine as CRXDE is working but WCM not working Please suggest

    Hi,
    I tried to connect CQ with Oracle Weblogic For this i deployed crx-explorer_crx.war,crx-launchpad.war in weblogic and make CQ up on port 7001 but  i am not able to access miscadmin.
    Can you please breif me
    1)The packages we need to upload in CQ
    2)Steps to make miscadmin working

  • Creation of WCM  object types

    hi,
    from where i can create WCM Object type. i just started working on WCM ( work clearance management)...
    if some body have step by step customization settings for WCM, please let me know.
    regards,
    Amit kushwaha

    Dear Amit,
    WCM is used for getting the clearance / approval for a particular work (e.g. work that involves a lot of safety measures, intimation to lot of people as it affects their process) or clearance / approval from financial perspective (e.g. work that involves lot of money). If we have some particular aproval strategies in our business processes then one finds the use of Work Clearance Management.
    WCM consists of two types of permits....Technical Permits & Standard Permit(name not sure).
    Technical Permits involves Approval for hot work, high height work, work in other unsafe conditions. It may use the involvement of approval from safety deptt or higher authorities in your area.
    In Second one, permits from financial perspective comes.
    WCM is used for managing safety at work using work and safety permits like Lock out and Tag outs at work locations with hazardous nature of work. This has wide use in the Utilities and Oil and Gas industries
    We use wcm to observe the safety of the maintenance technician and also to observe environmental regulatio.
    Suppose you have to do welding on a mechanical fixture then you raise an WCM order. Afterwords safety engineeer from Safety department check the site whether it is harmful to do the welding. Perform lock out tagout if necessary and then give the clearnce for work
    Lock out -- Lockingthe particular tech obj for the safe working(ex: steam o/l valve locked means the tag will haning there it indicates the work is going on so others will not open)
    Tag out-- After completion the job Mtc I/c or safety officer or resp person tag out. This will be done all the work areas.
    In most case this will better use for oil, mines, hazardous industry
    Please check this link:
    www.nd-solutions.com/pdfs/case_utilities/UTIL_NB_PowerWorkClearance.pdf
    I would also like to stress that this is a part of Enterprise Asset Management.
    Please let me know in case of any queries.
    Regards,
    Rakesh

  • How to map the permits Scenarios

    Dear Experts,
    Good Morning  to Every to Body.
    I am confusing to map the permits scenario . In my client place they raise the Work permit request to the Safety Officer for getting the approval for doing their work.
    Based on working condition safety officer checks the safety precautions , after verification he approved it and handover to the workperson. if safety officer not satisfied with safety precaustions he deny to give the approving for start the work. this is one scenario. and this work permit valid only for that approved day only. if its not complete that day , next day again workpermit was raised by work person or incharge of the work.
    2. scenario : for any corrective action on running machine or predictive maintenance time , maintenance people gets the work approval from the Relevant department or Concerned persons. Ones relevant department head gives approved , then only maintenance people will start the work.
    i am requesting you please guide me how to map in sap with out complexity. i am waiting for you people response.
    please suggest me.
    thanks & regards
    Jalu

    Hi,
    There are 2 different type of permits.
    1. Safety Permit
    2. Work Permit
    Safety permit will be approved by Safety officer. This is your first scenario. Work permit is approved by Maintenance officer, that is your second scenario.
      IWO10007 Maint.order: Customer enhancement - permits in the order
    As permits are approved in IW32, through above mentioned User Exit, you can develop some logic to restrict the authorisation between Safety officer in case of safety permits & Maintenance Manager in case of work permits.
    Regards,
    Maheswaran.

  • How to WCM Operaional WCD items in Ztable

    Hello
    There is requirement to store WCM Operaional WCD items in Ztable at time of creation and saving after flagging a user status.
    We are trying the BADI -
    " BADI_WCM_OPWC" but it is not helpful. Can any body suggest any other method or enhancement spot.
    Regards
    Sanjeev Dhavan

    There is requirement to store WCM Operaional WCD items in Ztable at time of creation and saving after flagging a user status.
    It is not clear to me what you really mean by at time of creation and after flagging a user status. Do you mean when the items are physically saved to the database - or earlier when the user creates an item or changes the user status of an item? I'll assume you mean when the items are physically saved to the database.
    The update of the database of WCD items is carried out by the function module WCFZ_WCAIT_UPDATE. There you could by enhancement include additional functionality to update your own Z table. A word of caution  :whilst the enhancement framework allows an implicit enhancement of function modules - any implicit enhancement is likely to result in a semantic modification to the SAP program that can have unintended side-effects.
    I have spend many years working in WCM at a technical level and never ever had to do something like this. Nor would I.
    However, if you chose to do this - you must be aware that you should do absolutely nothing to interrupt the SAP update process. You may or may not be in an update task e.g. you cannot be sure other database updates are yet completed. You must not use status management. You must not change any of the SAP data. You absolutely must not use Commit Work. You must ensure that a failure of your update does not interrupt the SAP database update (Use appropriate try... catch for database operations).

  • Schedule adhoc query

    We want to use Personal ids to record work permits. In this infotype you can enter a valid to date.
    Can we create an adhoc query which can select all data where the valid to date is within the next 90 days ?
    Can we schedule this adhoc query so that it runs nightly and sends the report to a given email address?

    Hi,
    For this you have to use background job processing and workflow..
    Regards,
    Kapil Kaushal

  • E-Recruitment: Process Templates

    Hi All
    I have a query regarding E-Recruitment module.
    I am not clear with the concept of Process templates and Activity types in E-Recruitment.
    According to what i understood..
    Process templates, Processes  and Activities are created by Recruiter once the system is in use.
    There are Standard proccesses and activity types already available.
    1) Then what is the job of a Functional consultant with respect to process templates, proccess, activity types and activities while configuring the system?
    2) Pls Correct me if m wrong..
        The one who is configuring the system, only has to define activity types and make them available for the recruiter to design    his own process templates and processes?
    (If yes then this would simply increase recruiters job)
        ---Activites he will be creating to assign in Processes, will be the instances of Activity Types configured by us.
    Is my understanding correct?
    if no pls explain the correct scenario
    3) What are the restrictions while using process templates by recruiters?
         ---Meaning does the recruiter has to complete activity A compulsorily before going to activity B ?
         ---Can this be controlled by configuration specific to activities and processes based on client's requirments?
    Please help me in understanding the concept clearly
    Regards
    Asha

    hello asha,
    questionaires are a posibility to flexible gather information from candidates or feedback of people involved in the hiring process.
    There are differen scenarios where questionairs can be used. In the application wizard to gather information not available in standard or only nbeeded from certain target groups / for certain requisitions. You can send a questionaire to a candidate to get additional information of interesting candidates. This way you can keep the application wizard short so not half of the candidates gets tired and leaves the website before reaching the end. You use questionaires for the manegers feedback to an application or to document interview results in the system. Furthermore you can use it for an additinal tagging of candidates in the pool. Instead of only mark them A, B, C you can add a questionaire IT Specialist with 10 questions for skill areas to track OS know how, methology know how, programming language know how, ...
    As consultant you have to help the customer to find where he needs additional data. Then you have to evaluate if the questionaire is the right solution. For a general guideline: questionaires are flexible but horrible to evaluate in mass or used in automated processing. Depending on your skill set a tech guy usually needed here, too.
    Example:
    SAP does not support the nationality in the candidate profile. Many customers here need this information due to early starting processes for getting work permits when hiring a candidate who are no EU resident. You can gather this information with a questionaire or enhance the profile.
    If the customer only wants to have the information to check by hand when planning a hiring, it's ok to use a questionaire. Even if there are different questionaires for the application wizard the recruiter can always look at the one used. If he wants to run statistics on this information or wants to display the information in the data overview questionairs are no good idea. As every new questionaire means changing the data overview and statistics about the HRHAP tables are just horrible.
    When you know where to use questionaires the exact design of the content is of course also your part. The creation of questionaires in the system is in my opinion a customer task as they are usually changing over the time (= replaced by new ones as used questionaires cannot be changed). That's why training them how to maintain questionaires should be you task.

  • Essbase Systems Development Opportunities in London

    I have an excellent opportunity for an experienced Essbase Systems Developer to join a large global organisation in London. The role will be looking at Financial Systems development and will require you to lead a team of Essbase and SAS developers.
    I am looking for candidates with excellent Essbase and SAS development skills who have a background in Team Leadership and Financial Systems.
    If you are currently looking for new Essbase Development roles I would be keen from you. Please send CVs through to my email address [email protected] for an immediate review and a detailed job spec.

    Are they willing to offer employment and work permits to Americans? What type of salary?

  • OS9 emulator for Intel Macs?

    Since apparently classic environment will simply not run on the new Intel Macs, anyone know of any plans to create an OS9 emulator that would allow old programs to run on them? Seems like it would have more than enough power to do at least basic classic stuff.

    Joe-
    After I made the switch to OS X I didn't want to spend the money for Office and wanted better import/export flexibility than Apple Works permitted.
    I tried Open Office and found it too slow. I found AbiWord to my liking. I also liked Mariner Write.
    Mariner Write can't open Wordperfect directly but only after saving WP as an RTF file. However, I can open WP 3.5 files with AbiWord and I've never experienced any font or formating incompatabilities.
    AbiWord is open source. Mariner Write cost $49.95 or the Mariner Write/Calc Pak is $89.95.
    I'm more satisfied using these two word processors than any other word processing app(s) since I began using a Mac in 1988.
    Fred
    PB G4 and eMac G4 and PB 5300 and PowerPC 6100 601   Mac OS X (10.4.5)   Mac OS X 10.3.8, Mac OS 7.6.1, Mac OS 9.1

  • Not issue permits until wcd(work clearance document) is tagged(issue is related to wcm)

    Hi All,
    I got a requirement from my client that user is unable to issue permits utill wcd is tagged. kindly suggest how is it possible

    Greetings Peter,
    I believe your requirement is that:
    no Approvals can be given on the WCA, until the WCD is in Tagged status ETG at least
    (and can have the relevant Approval?)
    To achieve this, you must define a Cross-Document Approval Process and an Approval Hierarchy.
    Create an approval such as "Tagged" in IPMD and assign it to the WA and WD objects under SPRO > Plant Maintenance and Customer Service > Work Clearance Management > Approvals > Assign Approval
    Create this Approval as "Mandatory", "Copy Automatically", "Issue Automatically" in IPMD.
    Under same parent node, Define Hierarchy for Approvals in such a way that the other Approvals you want to grant after Tagging only have a hierarchy level higher than "Tagged".
    Under same parent node, define Cross-document Approval Process, assigning the Approval "Tagged" to WA and WD, marking it as relevant to the process and set the process direction as going down from WA.
    This should allow you to meet this requirement, I think.
    You could also look at the node SPRO > Plant Maintenance and Customer Service > Work Clearance Management > Approvals > Block Issuing of Approvals > Define Dependent on System Status
    but I think it does not check the status cross-document, which is what you require.
    N.B. I think that actually if you have access to an IDES system, looking at the WCM setup for Plant 1000 there might be very helpful to you.
    More useful info for you:
    Work Clearance Management (PM-WCM) - SAP Library
    Approvals - Work Clearance Management (PM-WCM) - SAP Library
    Configurations necessary for WCM
    I hope you do find this useful and come back with any further questions or issues.

  • Permits & Work Clearance Mgmt

    Kindly provide distinct differences / advantages / disadvantages between Permits & Work Clearance Management functionalities of PM Module

    Prime difference lies in the complexity of requirements to perform a particular work. Permits are much simpler.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm
    WCM goes into elaborate details like locking/tagging and and their removal from an equipment during various stages of the order. WCM and maintenance order processing go parallely.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm
    If for instance your plant requires a permission from the fire services manager prior to doing a hotwork and that is all then u may as well use a permit.
    However if your company is into power distribution and there could be more than one maintenance jobs being performed along a power line then you may want a more complex mechanism to tell you before you turn off or turn on the breaker.
    thanks
    Bala

  • Issue in generation of no. of work approval in wcm

    Hi experts,
    I am facing an issue in wcm. after entering into maintenance order when i click on work approval it creates no. of work approval which should be generated when we set it as prepared.
    kindly share if any views regarding the same.
    see status of work approval is created no prepared. i want that it should generate no. when it is set to prepared.
    screen shot attached.

    Greetings Hithendra,
    It is not possible as far as I know, since you need an object in SAP to save a CRTD status against any transactional object, such as a WAP, and you need to generate an object number to save an object.
    Can you elaborate on why do you not want to have a number generated for a CRTD WAP? What is your business requirement?

  • Ports and IPs to be open/permitted in firewall to download and work in creative cloud

    What is the complete list of ports and IP addresses to be open/permited in our enterprise firewall in order to let internal PCs download and work with creative cloud applications?

    Our firewall only supports IP configuration (not URL). Do you have IP list?
    From: Rajshree [email protected]
    Sent: miércoles, 06 de noviembre de 2013 17:23
    To: Simon, Mariano
    Subject: Ports and IPs to be open/permitted in firewall to download and work in creative cloud
    Re: Ports and IPs to be open/permitted in firewall to download and work in creative cloud
    created by Rajshree <http://forums.adobe.com/people/Rajshree>  in Adobe Creative Cloud - View the full discussion <http://forums.adobe.com/message/5819892#5819892

Maybe you are looking for