Workflow error Event 11903

We are receiving the following error Event ID 11903
The Microsoft Operations Manager Expression Filter Module could not convert
the received value to the requested type.
Property Expression: 529;644
Property Value: 529;644
Conversion Type: DataItemElementTypeUnsignedInteger(6)
Original Error: 0x80FF005A
One or more workflows were affected by this. 
Workflow name: MomUIGeneratedRule125158e6dd2149fbb8ab76e647986b1c
Instance name: XXXXXX
Instance ID: {40D48D2D-5A62-BC78-2D39-8A15985F5AE2}
Management group: XXXXXX
Any help greatly appreciated

Hi Graham,
I am having the same kind of issue in my environment. This event gets logged into all my server logs. But  i am unable to find which rule is creating this error. Is there a query to find the rule name from any of the below.
Property Expression: ^(1069)$
Property Value: ^(1069)$
Conversion Type: DataItemElementTypeUnsignedInteger(6)
Original Error: 0x80FF005A
One or more workflows were affected by this. 
Workflow name: MomUIGeneratedRule125158e6dd2149fbb8ab76e647986b1c
Instance name: XXXXXX
Instance ID: {40D48D2D-5A62-BC78-2D39-8A15985F5AE2}
Management group: XXXXXX
Jesty

Similar Messages

  • Service Manager 2012 R2 - Workflow Error - Event ID 4513

    Hi,
    We started to suffer a Workflow error in Service Manager 2012 R2 2 weeks ago. We noticed through the failure of some SLOs not being applied on Work Items. The error is the follow:
    Log Name:      Operations Manager
    Source:        HealthService
    Date:          13/03/2014 12:10:00
    Event ID:      4513
    Task Category: Health Service
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      XXX-XXX-XXX
    Description:
    The callback method DeliverDataToModule failed with exception "'­', hexadecimal value 0x1F, is an invalid character." in the module Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.
    Workflow: WorkItem_SetFirstAssingedTo_RelationhsipAdd_Rule
    Instance: Destino do Fluxo de Trabalho (interno)
    Instance ID: {383E578B-E1C9-2802-0047-815853405778}
    Management Group: CTRPROD
    Full Exception Text:
     System.ArgumentException: '­', hexadecimal value 0x1F, is an invalid character.
       at System.Xml.XmlEncodedRawTextWriter.InvalidXmlChar(Int32 ch, Char* pDst, Boolean entitize)
       at System.Xml.XmlEncodedRawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)
       at System.Xml.XmlEncodedRawTextWriter.WriteString(String text)
       at System.Xml.XmlWellFormedWriter.WriteValue(String value)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
    declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteArrayOfanyTypeToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
       at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteResultToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , ClassDataContract )
       at System.Runtime.Serialization.ClassDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObjectContent(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObject(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.XmlObjectSerializer.WriteObjectHandleExceptions(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.WriteObject(XmlWriter writer, Object graph)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.DataItemSubscription.GenerateItemXml(XmlWriter writer)
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GenerateItemXmlInternal()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GetItemXml()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.QueryItem(XPathExpression xpathQuery)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.TokenResolver(String tokenValue)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.RegexMatchEvaluator(Match m)
       at System.Text.RegularExpressions.RegexReplacement.Replace(MatchEvaluator evaluator, Regex regex, String input, Int32 count, Int32 startat)
       at System.Text.RegularExpressions.Regex.Replace(String input, MatchEvaluator evaluator)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.Resolve(String str)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.GenerateWindowsWorkflowTaskParameterValue(String elementTemplate)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskParameterValue.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskArrayParameter.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTask.Resolve(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.ProcessDataItems(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.OnNewDataItems(DataItemBase[] dataItems, Boolean isLogicalSet, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback
    completionCallback, Object completionState)
       at Microsoft.EnterpriseManagement.HealthService.Internal.InputPortCallbacks.InputStreamBatchedAcknowledgedCallbackHandler`1.InputPortCallbackImplementation(DataItemBase[] dataItems, Boolean isBatchLogicalSet, DataItemAcknowledgementCallback
    acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ModuleContainer`1.Microsoft.EnterpriseManagement.HealthService.Internal.IModuleContainer.DeliverDataToModule(UInt32 inputPortNumber, DataItemBase[] dataItems, Boolean isBatchLogicalSet,
    DataItemAcknowledgementCallback acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ManagedHostHelper.Microsoft.EnterpriseManagement.HealthService.Internal.IManagedHostHelper.DeliverBatchedDataToModule(UInt32 inputPortNumber, Object moduleInputReference, DataItemBase[]
    dataItems, UInt32 dataItemCount, Boolean isBatchLogicalSet, Object completionReference)
    Event Xml:
    <Event xmlns='http://schemas.microsoft.com/win/2004/08/events/event'><System><Provider Name='HealthService'/><EventID Qualifiers='49152'>4513</EventID><Level>2</Level><Task>1</Task><Keywords>0x80000000000000</Keywords><TimeCreated
    SystemTime='2014-03-13T15:10:00.000000000Z'/><EventRecordID>4953905</EventRecordID><Channel>Operations Manager</Channel><Computer>CTR-SCSM-MS01.sp.local</Computer><Security/></System><EventData><Data>CTRPROD</Data><Data>WorkItem_SetFirstAssingedTo_RelationhsipAdd_Rule</Data><Data>Destino
    do Fluxo de Trabalho (interno)</Data><Data>{383E578B-E1C9-2802-0047-815853405778}</Data><Data>DeliverDataToModule</Data><Data>'­', hexadecimal value 0x1F, is an invalid character.</Data><Data>Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction</Data><Data>System.ArgumentException:
    '­', hexadecimal value 0x1F, is an invalid character.
       at System.Xml.XmlEncodedRawTextWriter.InvalidXmlChar(Int32 ch, Char* pDst, Boolean entitize)
       at System.Xml.XmlEncodedRawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)
       at System.Xml.XmlEncodedRawTextWriter.WriteString(String text)
       at System.Xml.XmlWellFormedWriter.WriteValue(String value)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
    declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteArrayOfanyTypeToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
       at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteResultToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , ClassDataContract )
       at System.Runtime.Serialization.ClassDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObjectContent(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObject(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.XmlObjectSerializer.WriteObjectHandleExceptions(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.WriteObject(XmlWriter writer, Object graph)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.DataItemSubscription.GenerateItemXml(XmlWriter writer)
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GenerateItemXmlInternal()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GetItemXml()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.QueryItem(XPathExpression xpathQuery)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.TokenResolver(String tokenValue)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.RegexMatchEvaluator(Match m)
       at System.Text.RegularExpressions.RegexReplacement.Replace(MatchEvaluator evaluator, Regex regex, String input, Int32 count, Int32 startat)
       at System.Text.RegularExpressions.Regex.Replace(String input, MatchEvaluator evaluator)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.Resolve(String str)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.GenerateWindowsWorkflowTaskParameterValue(String elementTemplate)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskParameterValue.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskArrayParameter.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTask.Resolve(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.ProcessDataItems(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.OnNewDataItems(DataItemBase[] dataItems, Boolean isLogicalSet, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback
    completionCallback, Object completionState)
       at Microsoft.EnterpriseManagement.HealthService.Internal.InputPortCallbacks.InputStreamBatchedAcknowledgedCallbackHandler`1.InputPortCallbackImplementation(DataItemBase[] dataItems, Boolean isBatchLogicalSet, DataItemAcknowledgementCallback
    acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ModuleContainer`1.Microsoft.EnterpriseManagement.HealthService.Internal.IModuleContainer.DeliverDataToModule(UInt32 inputPortNumber, DataItemBase[] dataItems, Boolean isBatchLogicalSet,
    DataItemAcknowledgementCallback acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ManagedHostHelper.Microsoft.EnterpriseManagement.HealthService.Internal.IManagedHostHelper.DeliverBatchedDataToModule(UInt32 inputPortNumber, Object moduleInputReference, DataItemBase[]
    dataItems, UInt32 dataItemCount, Boolean isBatchLogicalSet, Object completionReference)</Data></EventData></Event>
    Has anybody faced the same problem?
    Thanks
    Thiago

    Hi Thomas,
    Thanks for your response. I understood your comments but, the system was running fine for about 3 months. No changes have been applied during this time and suddenly this error pops out.
    I opened a case with MS Support, but they applied a WA which does not resolve our problem, because the error appears after a few days later after the WA procedure.
    The WA is just a watermark reset using this SQL query:
    DECLARE @MaxTransactionId Int, @RuleID uniqueidentifier
    SET @RuleID = '' -- <-- SET THIS TO YOUR RULE ID!!!
    SET @MaxTransactionId = (SELECT MAX(EntityTransactionLogId) FROM EntityTransactionLog) 
    UPDATE CmdbInstanceSubscriptionState
    SET State = @MaxTransactionId
    WHERE RuleId = @RuleID
    The problem with this WA is that all Work Items affected by the problem - workflows not being applied - do not get the information we need to identify all the SLA's. The system just "forget" them and moves on.
    Cheers,
    Thiago

  • Regarding Workflow triggering event.

    Hi,
    Description: I have created a Object type and a event for the same by transaction SWO1, after that i have created a WorkFlow(WF) for which the triggering event is the event i have created in the Object Type. There is a report in which i have used the FM "SWE_EVENT_CREATE" and passed the Object Type, Event Name, Key field values and the creator.
    Problem: When i am executing this report the FM is called and the sy-subrc after call is 0, stating that the call was succesfull, but the WF is not getting triggered when i went to transaction SWI2_FREQ to check this WF is not at all triggered. But when i tested from WF transaction SWDD it is working fine.
    Could anyone please explain me on this. or is there any other way to use an event of a Object Type to trigger WF.
    Thanks and Regards,
    Raghavendra Goutham P.

    hi gauthum,
    try this chks.
    Workflow Trace On/Off - SWU8
    Display              - SWU9
    Delete              - SWU10.
    Work Item Analysis    - SWI1
    Identifying workflow for the work Item :
    Tx : SWI1 - Enter the workiem id which has been identified in workflow log
           The details consists of workflow of the workitem.     
    WorkFlow Errors :
    1. Workflow Not Started           - Using Event Trace we can Identify
    2. Started but No Proceeded           - Wrong Object Keys
    3. Problem in Work Item Execution
         Dialog Work Item          - Agent Determinaion Error ( Position,Role,User )
                             - Role Resolution Error
                               Reqd Element would no be
                               Set in Binding
         Background Work Item      - Make Foreground and Test once Sucessfull make it Back round
    rgds
    nver
    if hlped mark points

  • KIMYONG: Outbound Workflow Notification Event Message 를 tracking하는 방법

    Purpose
    Outbound Workflow Notification Event Message 가 발송됐으나 user가 받아보지 못한경우 가 발생했으나 user
    이를 tracking하는 방법을 알아보고자 한다.
    Solution
    1. notification 이 발송될때 oracle.apps.wf.notification.send event발생한다
    event key 로 Notification ID 를 사용한다.
    2. 다음 조건에서만 The e-mail notification이 발송된다.
    i) Notification status is OPEN or CANCELED
    ii) Notification mail_status is MAIL or INVALID
    SELECT status, mail_status
    FROM wf_notifications
    WHERE notification_id = '&nid';
    iii) Recipient Role has a valid e-mail address and notification preference is in the format MAIL%
    SELECT email_address,
    nvl(WF_PREF.get_pref(name, 'MAILTYPE'),notification_preference)
    FROM wf_roles
    WHERE name = upper('&recipient_role');
    iv) Workflow Deferred Agent Listener is running
    v) Workflow Notification Mailer is running
    3. e-mail로 발송되기전 message가 2번 정지한다.
    Raised --> WF_DEFERRED Queue --> Processed by Deferred Agent Listener --> WF_NOTIFICATION_OUT Queue --> Processed by Notification Mailer and sent as e-mail
    4. oracle.apps.wf.notification.send을 dispatch 할때 error가 발생하면
    message 는WF_ERROR queue에 enqueue되고 .
    Error Agent Listener 가 WF_XML.Error_Rule 을 수행하는 oracle.apps.wf.notification.send 의
    ERROR subscription 을 dispatch합니다.
    5. notification id 와 WF_DEFERRED and WF_NOTIFICATION_OUT queue 의 message stauts 등을 확인하기 위해 $FND_TOP/sql/wfmlrdbg.sql 를 수행합니다.
    PROCESSED in WF_DEFERRED - The message is enqueued to WF_NOTIFICATION_OUT
    PROCESSED in WF_NOTIFICATION_OUT - The message is sent as e-mail
    READY in WF_DEFERRED - Check if Deferred Agent Listener is running
    READY in WF_NOTIFICATION_OUT - Check if Notification Mailer is running
    6. notification id 의 outbound XML message 를 분석합니다.
    . The wfmlrdbg.sql output provides the XML message generated by WF_XML.Generate at the time the script is run. If the original XML message used by the mailer is required to be analyzed following SQL may be used.
    SELECT tab.user_data.text_lob text_lob
    FROM applsys.aq$wf_notification_out tab
    WHERE dbms_lob.instr(tab.user_data.text_lob,'&1') > 0
    7. 필요하다면 WF_NOTIFICATION_OUT queue 를 rebuild 합니다.
    The wfntfqup.sql script rebuilds the WF_NOTIFICATION_OUT queue by dropping and recreating
    that queue, removing pending notification messages from the WF_DEFERRED queue, and
    repopulating the WF_NOTIFICATION_OUT queue from the Oracle Workflow Notification System
    tables.
    Wfntfqup.sql Version >=115.9
    If you have implemented Oracle Alert and the WF_NOTIFICATION_OUT queue contains any pending
    alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
    wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any, the
    script returns an error message that specifies how many alert e-mail messages are pending
    and indicates that these messages must be processed before the script can run.
    Wfntfqup.sql Version <= 115.8
    If you have implemented Oracle Alert and the WF_NOTIFICATION_OUT queue contains any pending
    alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
    wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any,
    exits without performing any changes.
    Stop Notification Mailer, rebuild Mailer Queue using $FND_TOP/patch/115/sql/wfntfqup.sql.
    Reference
    Note 433359.1

    Thanks for your update.
    I have checked as per the metalink doc "242941.1" . i am getting below message only for IMAP.
    *C:\prod\scripts>%AFJVAPRG% -classpath %AF_CLASSPATH% -Dprotocol=imap  -Ddbcfile=
    c:\prod\prodappl\fnd\11.5.0\secure\PROD_qlng-s-012\prod.dbc -Dserver=qlng-s-003.
    qalhatlng.int -Dport=995 -Dconnect_timeout=120 -Ddebug=Y -Daccount=oracle1@qlng
    .om -Dpassword=System123 -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer
    MLRTST : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.o
    ut until necessary parameters are retrieved for Logger to be properly started.
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.
    IMAPStore,Sun Microsystems, Inc]*
    Kindly suggest need to any setup in ms exchange server or firewall level.
    Thanks

  • System ERROR EVENT WARNING : ORACLE.APPS.AR.HZ.CUSTACCOUNT.CREATE

    Hi,
    When Customer is Created / Updated using Receivables or TCA APIs in Oracle Apps 11.5.10, all registered Business Events are firing and subscription code (PL/SQL Rule Function) is executing successfully.
    In Administrator Workflow window, Notifications tab showing System Error: Warning Message for all the events which are subscribed.
    eg:
    "System: Error Event WARNING : oracle.apps.ar.hz.CustAccount.create /
    oracle.apps.ar.hz.CustAccount.create62829 " Warning Message.
    Please advice.
    Thanks and Regards,
    Vijay

    Whenever there is a requirement of raising a Business Event due to some custom activity, you should call wf_event.raise to do this.
    Just google to see the parameters you need to pass it while calling it.

  • Error events 31551 and31552 only during the night

    events error 31551 and 31552 started show up for some time every night 00:00 to 08:00 “SQL exception timeout expired... timeout period elapsed prior to completion... “
    Also 16 events warning 2115 showed up in between the 31551-315522.
    At all time we have many warnings 29202,
    If not closely monitored our rms health service stops working ... "Staled" state
    No backup runs on SQL db. DBs are backed up by sql on another lun that is backed up by Tivoli tsm.
    No antivirus on Db.
    The SCOM db have been moved 3 weeks ago on from SQL 2k5 to SQL 2008 r2 sp1.
    My SQL admin found out that the SQL is generating lots of i/o (not all on disk, some in memory...) over 1 Tb of data  every night for some time... During the day DW db size is 74062,56 MB
    We moved SQL data and log folders on different  luns, DW on its own lun. We moved the Datawarehouse on another lun, it made no difference.
    The datawarehouse lun has long latency during the night, up to 15 sec.
    No new MP installed in the past 8 months, only few overrides and disables recently
    Our scom setup is 2007r2 cu7, rms on 2k3sp2, ms (acs) 2k3sp2 and ms 2k8sp2, 1 gateway in a dmz on 2k8 sp1 . Setup dated 2008 and 2011, all virtual Esx and approx. 150 agents.
    From what we have read it seems to be related to performance, however we are unable to find root cause of issue.
    Can you please help us determine what causes these error events to show up at night only...
    Summary of error events follows:
    Event Source: Health Service Modules
    Event Category: Data Warehouse
    Event ID: 31551
    Date:  04/06/2014
    Time:  08:00:31
    User:  N/A
    Computer: MMTRLPALPINF033
    Description:
    Failed to store data in the Data Warehouse. The operation will be retried. Exception 'SqlException': Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.Relationship
    Instance name: MMTRLPALPINF033.Prod.MJQ.Local
    Instance ID: {0F390614-0505-F7C2-49A3-128862BF520E
    Workflow name can also be  "Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity "
    One 31551 with following description
    Failed to store data in the Data Warehouse.
    The operation will be retried. Exception 'SqlException':
    A transport-level error has occurred when receiving results from the server.
     (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)
    Event 31552
    vent Type: Error
    Event Source: Health Service Modules
    Event Category: Data Warehouse
    Event ID: 31552
    Date:  04/06/2014
    Time:  07:08:45
    User:  N/A
    Computer: MMTRLPALPINF033
    Description:
    Failed to store data in the Data Warehouse. Exception 'SqlException': Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.DataWarehouse.StandardDataSetMaintenance
    Instance name: Performance data set
    Instance ID: {3EC423BE-5714-81B5-AA64-29A3E158A7B6}
    Management group: OPSMGR_P
    Event Type: Error
    Event Source: Health Service Modules
    Event Category: Data Warehouse
    Management group: OPSMG
    The 31552 was mostly with Instance name: Performance data set
    Some with Instance name: event  data set or state data set and some with the RMS server.

    Hi,
    You have moved the database to a new SQL server. What is the collation on the new server? Only SQL_Latin1_General_CP1_CI_AS is supported. Please check free space in the SCOM DB's and transaction log DB.
    Same issue here, please refer to this one:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/9be98791-1f41-4563-990f-0e5d622e7955/scom-2007-r2-failed-to-store-data-in-the-data-warehouse-exception-sqlexception-timeout?forum=operationsmanagergeneral
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Workflow error in shrepoint2013

    System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.WorkflowManagementException: A response was returned that did not come from the Workflow Manager. Status code = 503:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
    <HTML><HEAD><TITLE>Service Unavailable</TITLE>
    <META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
    <BODY><h2>Service Unavailable</h2>
    <hr><p>HTTP Error 503. The service is un
    i am facing above error
    i have started workgflowmagmntpool in iis application pool.
    and again it is stopping when i am trying to publish the workflow
    in event viewer i have got an error that sql server agent(sharepoint) is stopped.
    after that i have strted both sql server agent and workflowmgmntpool services.
    after that also when i publish workflow it is not working and giving same error.
    but OOB workflows are publishing.

    You are getting 503 which is service unavailable. Can you please check if application pool is stopped on any of the server. 
    Open IIS and make sure identify of the WorkflowMgmtPool is correct, you can re-type the identify. Then make this pool is started.
    Check and reenter credentials for:- Open Services.msc, find Service Bus Message Broker service and Windows Fabric Host Service. Make sure they are running. If not, firstly, start Windows Fabric Host Service, then start Service Bus Message Broker service.
    If Service Bus Message Broker service is started, stop and re-start it.
    http://stackoverflow.com/questions/21037734/how-to-resolve-error-while-trying-to-publish-2013-workflow-via-designer-probabl
    http://community.office365.com/en-us/f/154/t/179499.aspx
    also please share ULS log event details

  • Workflow Issue - Delivery address XML Reference workflow - Error

    Hello All,
    I am an ABAP developer, with very limited knowledge in Workflow, and I am stuck with an ongoing issue for quite sometime. We have a scenario where we need to a workflow triggers for a specific UNDATED sales order lines (identified by values in VBAP-Zfield ) in R/3 box, and it carries an XML request (probably mails it) to a SAP CRM destination, which would now update some CRM tables and generate a Call list in the SAP CRM box. This is one flow that used to be fine, but has stopped working since the past few months may because of some change, which is not yet identified. as multiple projects are working on the same boxes.
    To elaborate -
    1 - We have a SALESORDER_CREATEFROMDAT2 Idoc creating the SO, where in, based on a CUTOFF date condition, (if it is in the past), a VBAP-ZFIELD for the corresponding line is set to a value (08).
    2 - This event is expected to trigger a workflow for the Undated order/Delivery resolution , which would then create an XML doc for the SO and send this across to CRM box
    3 -This will then update a Ztable. This will be handled by a batch job in CRM to generate a call list.
    Now we are facing a problem in the second step here, where in the activity - 'BCKGRD: Create XML_DOC for SO: xxxxxxxx' is completing successfully, but having a failure in the next step  - 'Delivery address XML Reference workflow - ERROR'
    This is how the detailed workflow log looks -
    WF-BATCH                  Web work item created                               03.04.2014 08:12:29
    WF-BATCH                  Execution started automatically                   03.04.2014 08:12:29
    WF-BATCH                  CL_SWF_RUN_ALERT_ERROR                   03.04.2014 08:12:31
    WF-BATCH                    IF_SWF_UTL_MAIL~SEND                      03.04.2014 08:12:31
    WF-BATCH                  SWW_RI_EXECUTE_S                            03.04.2014 08:12:31
    WF-BATCH                    SWW_RI_EXECUTE_S                           03.04.2014 08:12:31
    WF-BATCH                  Execution started automatically                      03.04.2014 08:12:31
    WFXML                     START_EXECUTION_IN_BACKGROUND            04.04.2014 04:00:35
    WF-BATCH                  Execution started                                          04.04.2014 04:00:36
    WF-BATCH                  CL_SWF_RUN_ALERT_ERROR                   04.04.2014 04:00:44
    WF-BATCH                    IF_SWF_UTL_MAIL~SEND                   04.04.2014 04:00:44
    WF-BATCH                  Execution started                                     04.04.2014 04:00:45
    WF-BATCH                    SWW_RI_EXECUTE_S                       04.04.2014 04:00:45
    I've also attached a screenshot for the errors, if that gives a clue.
    Request all the workflow experts to help me with a solution, or an approach towards a fix.
    Thanks & Regards,
    S Sen.

    Hi S Sen,
    Agree with Ronen....no mail recipient or from 10 records of mail recipient - one record is empty.
    Try to find out the intended email recipients....any data change there might have resulted in errors since few months. Maybe, some position got vacant, some config table to get the recipients got changed.....
    regards,
    Modak

  • WorkFlow Error ........ Can we debug it ? Help.. it's urgent

    Hi All,
    I'm newbie in SAP and I realy need more explaination about worklow. I have two workflow : wf1 and wf2; and both of them will update complaint document status.
    The scenario is if Event 1 raised then both of workflow will be triggered and both of workflow will check claim amount inputed by user.
    If claim amount is greater than US$ 1000, wf2 will be cancelled and wf1 will ask approval from user, if the user approved then wf1 will update complain status from A to B.
    If claim amount is less than or equals with US$ 1000 , wf1 will be cancelled and wf2 will update complain status from A to B.
    In condition 1 ( claim amount > US$ 1000 ), the workflow works properly and there's no error occured.
    But in condition 2 ( claim amount <= US$ 1000 ), an error occured while updating status.
    Is there any reason why this happens ? Both of workflow used the same method from BUS2000120, that is USERSTATUSSET but in wf2 an error occured and the error code is 1005 ( Status Not Allowed ) but in wf1 wofks properly.
    Is it because there's no delay in wf2 and the record still used by another process ? please advice me ....
    Beside that I've tried to debug why error happens but it seems it can't be debuged because it works in background.
    Is there any way to debug background process that done by WF-BATCH ?
    Or can we simulate a workitem / action node in workflow ?
    If there is any way please tell me step by step ...
    Please advice me and many thanks in advance.
    regards
    eddhie kurnianto

    hi all,
    many thanks for the reply, sory I'm wrong in giving the workflow scenario. I need 2 workflow because each workflow triggered by different event. wf1 triggered by event1 and wf2 triggered by event2.
    if event1 raised then wf1 will be triggered, and wf1 will check the claim amount. if the claim amount > US$ 1000 then, wf1 will ask approval for the claim payment. If approved then complain status will be updated from B to C.
    This condition works well and no error occured.
    if event2 raised then wf2 triggered, and wf2 will check claim amount. if the claim amount <= US$ 1000 then the complain status will be updated from A to C automatically.
    This condition doesn't work and an error occured.
    If I trace the the workflow, the error code is 1005. That error code refer to method UserSetStatus in BUS2000120. In that method, it called Function CRM_STATUS_CHANGE_EXTERN_OW .
    If I simulate the function CRM_STATUS_CHANGE_EXTERN_OW via t-code SE37, it works well to update status from A to C.
    Last nite after I posted this question, I created the event2 ( use t-code SWUE ) to simulate the error but the workflow works fine. But if the event created through transaction the workflows error....
    please advice .....
    Btw, Mikkel, for your answer for debuging, I have another question. Must I implements infinite loop to be able to debug via process overview ( SM50 ) ? And how to jump into debugger from process overview ?
    Many thanks in advance

  • Workflow Errors: APWRECPT, receipts.overdue

    Hello all,
    For an active user (non-termed) on an expense report that required a receipt it is getting an error in the workflow. The expense report completed and has an owner. The receipt was never received. Now the Workflow Type: Expense Receipts errored at the Receipts Overdue Process. Below is the error. Any help or advice on this error and how to fix would be greatly appreciated. Thank you,
    Workflow Errors: APWRECPT, *********:receipts.overdue:28-JAN-2011 12:39:46
    Failed Activity Initialize (Receipts Overdue)
    Activity Type Function
    Error Name InvalidOwner
    Error Message [InvalidOwner]
    Error Stack AP_WEB_RECEIPTS_WF.Init(APWRECPT, *********:receipts.overdue:28-JAN-2011 12:39:46, **********, Get Name Info Associated With Preparer Id) AP_WEB_RECEIPTS_WF.InitOverdue(APWRECPT, *********:receipts.overdue:28-JAN-2011 12:39:46, 216375, Initialize common event data) Wf_Engine_Util.Function_Call(AP_WEB_RECEIPTS_WF.InitOverdue, APWRECPT, *********:receipts.overdue:28-JAN-2011 12:39:46, 216375, RUN)

    For an active user (non-termed) on an expense report that required a receipt it is getting an error in the workflow.Since the user is not end-dated, the solution in the doc referenced above is not applicable. Please log a SR and Oracle support should help.
    Thanks,
    Hussein

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • Workflow error when submitting Employment Verification Letter in ESS Portal

    in ESS Portal, when trying to send the employment verification letter by mail I get a workflow error in ECC. Error occurs in workflow template WS01000045 (Employment and Salary Verification) task TS00408262 (PF: Find basic pay). The employee submitting the verification letter request is an active employee, has infotype 105 data in the system, and has basic pay data in the system.
    workflow log (SWI1) shows the "Basic Pay" object available and when double clicking on the object, it brings me to PA20 where I can see the Basic Pay infotype with correct data.
    Can someone help?
    note: the employee is Canadian, in case this matters.
    Tiberiu

    Have you created the resposibilities for the rule 60100010 becuase if you observe the rule it will determine the agents by using the category Agent Determination: Reponsibilities so i think you missed to create responsibilities
    for creating responsibilities [check|http://help.sap.com/saphelp_nw70/helpdata/EN/ef/3dc9469bbe11d189470000e8216659/content.htm]
    Also check that if Rule fails to determine the agents correctly then how can you [handle|http://help.sap.com/saphelp_nw70/helpdata/EN/7f/aed54c9c8d11d1894c0000e8216659/content.htm]

  • CrystalReportViewer: "Missing parameter values with implemented error event

    I'm using the CrystalReportViewer in APS.net (C#), and try to display a report in it.
    I've implemented the error event of the viewer to show the user a different error message than the viewer itself does.
             this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
          protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
             var msg = "Error in CrystalReportViewer\r\n{0}".FormatInvariant(e.ErrorMessage);
             throw new InvalidOperationException(msg);
    But.... Now if I want to show a report that has parameters in it, the parameter page does not appear before the report itself. How can I make my code work (without removing the implementation of the error event), so the viewer first shows the parameter page, before showing the actual report?

    And in the Page_Load method:
    this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
    I've done this so i can show my own error page to the user of the website. Otherwise the CRViewer shows his own error, and I do not want the user of the website to see this 'technical' error.
    So i've implemented the CrystalReportViewer.Error method:
    protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
       // Missing parameter values.
       var discardToShowParameterPrompt = (e.ErrorMessage.ToUpperInvariant() == "Missing parameter values.".ToUpperInvariant())
         || (e.ErrorMessage.ToUpperInvariant() == "Ontbrekende parameterwaarden.".ToUpperInvariant());
       if (discardToShowParameterPrompt)
          _Log.Debug("The parameter screen should be displayed now.");
       else
          var msg = "Error in CrystalReportViewer: {0}".FormatInvariant(e.ErrorMessage);
          throw new InvalidOperationException(msg);
    If I load a report with no params in the report, the page shows immediately the report.
    If I load a report with params in the report, the params page is shown, the user can enter the param values, and after pressing OK, the report is shown.
    If an error occurs (for example the report cannot connect to the database), the viewer does NOT show the error (because i've implemented the _error event) but my code throws an InvalidOperationException, and this is handled by code so the error is logged to a file, and the user gets a user friendly message on the website.
    If i do not implement the _error event, the user will see the technical error in the crystal reports viewer.
    If I comment out the code where I'm looking for the string "Missing parameter values." (or "Ontbrekende parameterwaarden") the parameter page will not be shown, and an error will be thrown by the Crystal Reports viewer.
    If I put e.handled = true in the _error event, and there is an error (for example the database cannot be found), no error will be thrown, and there is nothing to see in the viewer.
    So for now the only way to get the params page is to implement the _error event the way i've done in the above code, checking the error message on a string value.

  • Adobe Acrobat 8 Pro Application Error Event ID 1000

    Version: Adobe Acrobat 8 Pro (Updated)
    Operating System: Windows XP (Sp2)
    Launch Adobe Acrobat 8 Pro
    Select File and open a PDF file
    Popup appears: Reading Untagged Document
    Then and error appears ... Adobe Acrobat 8.1 has encountered a problem and needs to close
    Also receive same error when I select Edit\Preferences
    Application Event log contains the following:
    Application Error Event ID 1000
    Faulting application acrobat.exe, version 8.1.0.137, faulting module admplugin.apl, version 3.16.128.32, fault address 0x000a7bf1.
    Have uninstalled and reinstalled application...no change
    Any help would be apprciated

    No, I have not.
    Had another laptop and used it. 
    Re-imaged laptop exhibiting the issue and moved on
    Edward Bailey  |  Network Administrator  |  Pizza Inn, Inc
    t. 469.384.5231   [email protected]

  • Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

    2 node active passive, 2008 failover cluster.  I keep getting the following error events:
    The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
    Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
    However my quorum disk is online from what I can see.   One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
    I also noticed these errors are being entered every 15 minutes exactly.
    I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
    Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2?  Really?
    http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
    Any thoughts

    support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
    The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
    Check for below logs in the cluster logs:
    00000d84.00000f58::2014/11/18-19:04:06.805 INFO  [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
    00000d84.00000f58::2014/11/18-19:04:06.805 INFO  [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
    00000d84.00000ef8::2014/11/18-19:04:06.805 INFO  [QUORUM] Node 1: quorum is not owned by anyone
    Try reforming the cluster, it will resolve the issue.
    Change the quorum model to Node majority and back to node and disk majority.
    Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
    Thanks
    Himanshu Swarnkar (MSFT)

Maybe you are looking for