Workflow on internal order release??

hello
experts
i have a requirement to do a a workflow in ko01 . When the internal oder is raised it has 3 level of relaese and workflow have to be maintained for these three users
how can i proceed?
Plz help

Well you should start by finding out if there is any standard event triggered when an internal order is created. If so you also have the BOR which you should use. If not try to find the BOR and check the included attributes, methods and events so you can determine if you need to extend it.
Then try to find a standard workflow which will suffice your needs or could be copied and extended. If one exists use this as basis or as a model. If not, try to determine what should happen in your workflow and create a flow chart. Then build your workflow.
This should give you enough to do for starters.
Regards,
Martin

Similar Messages

  • Creating  workflow for purchase order release.

    Hi friends
    I want step by step detail about creation of workflow for purchase order release..
    After release purchase order it will goes to the two level of approval..
    after that the workflow should be completed...
    how can i develope the workflow for that scenario..
    Thanks
    Gowrishankar

    Hi Gowrishankar,
    You can get step by step workflow for PO using standard workflow
    <b>Release of Purchase Order :WS20000075</b>
    And for two levels of approvals you have to configure in SPRO the path is
    Purchase Order:
    SPRO> Material Management->Purchasing->/Purchase order-->Release procedure ---> Procedure with classification ---> set up procedure with classification ---> double click on Release strategies and Workflow.
    If you don't know about this configuration, you have to confirm with your MM consultant.
    Thanks and Regards,
    Prabhakar Dharmala

  • BAPI for Internal Order Release

    Dear SAP  GURU's
    Can anybody help me  from the following issue
    In IM52 once we budget internal order it will automatically trigger mail for user to release internal order,  so in this scenario we require BAPI  for Internal order release.
    KO02 - Change Internal order (Activity :  Release Internal order)
    Looking for Standard BAPI 
    Thanks and regards
    Alok Dixit

    Hi Alok,
    I am not sure about BAPI for this function.I suggest you try this kind of function with user exit like COOPA002 using appropriate program logic.
    Regards,
    Ashok

  • Internal Order Release/Cancel Release/...

    Dear All,
    I have several questions regarding Internal Order (Order type - 0401) release/cancel release options.
    In order to make IO "usable" After creation I select Release option and then assign the budget to the order. When the order is no longer needed I choose Cancel release so the order can be no longer used.
    So I am interested in:
    1) I have lots of orders which must be cancelled, is there any trasnaction for Batch canceling or releasing the orders?
    2) Does canceling the order affect for example expenses posted on this order? I mean expenses posted on this order dissapear or stay as it is?
    3) what is the difference between Cancel release and Technically completed.
    Thank you in advance.

    Hi,
    Yes CLOSE is the right option for finishing the order. As per my understanding there is no option in standard system to mass cancel/release an order.

  • Internal order release

    When I am creatin an internal order. I can create an internal order and then release it without going to KO02 to change.
    Is this possible to just NOT to release an internal order... after just creating it.
    Basic requirement is KO01 should just create and KO02 is for releasing.
    But KO01 just after creating , when using the general status management before saving the internal order , I can release the order as well. I wanted to not release the internal order before the order is created and saved. Is there a possibility to do this ??

    Because We need a control over the prcoess, and according to the roles... KO01 who can create an internal order cannot release an internal order. This is what we are trying to achieve.
    Thanks,
    GB

  • Workflow for Sales Order Release via Status Profile

    Dear all,
    i want to make a workflow for sales order which have 4 User Status in One status profile.
    Once Event triggered for sales order
    1.   Mail should go to main authority with sales order number.
    2.  Once authority will do some changes in the required field then he/she changes
         the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
    3.  Once again same changes in sales order but now user status-2 from user status-1
         as per line Item and mail should go to department no-2 (Head authority).
    4.  Once again same changes in sales order but now user status-3 from user status-2
         as per line Item and mail should go to department no-3 (Head authority).
    5.  Once again same changes in sales order but now user status-4 from user status-3
         as per line Item and mail should go to department no-4 (Head authority) .
    and parrally for each changes of Status mail should also go to User (Event Creator).
    6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
    Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
    please help me out.
    Thank You

    Hi Neeraj,
    First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
    Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
    As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
    The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
    Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
    Just go with these things and let me know if you get stuck up somewhere.
    Regards,
    Guddan

  • Workflow Purchase order release

    Hi,
    I want to activate workflow for purchase order released.
    Requirement is when first level releasaed the purchae order, it should mail to second level.
    I have done following settings in the system.
    In the SPRO - Release Procedure PO - Workflow, I have assigend Object type - US, User against release code.
    Done settings in t code SWDD - Workflow builder.
    Now when first level is releasing the PO, system is not triggering the event.
    I do not know weather i have done it correctly or not, But as per my above requirement, what settings should I do in the system in release strategy config and workflow settings.
    Waiting for your reply.
    Thanks,
    Samir Bhatt

    http://www.sap-img.com/workflow/workflow-of-purchase-requisition-release-strategy.htm
    Also Look into saptechnical dot com youll get detailed procedure for Workflow Scenarios.
    Regards,
    Ashok
    Edited by: Ashok Kumar Telikula on Aug 4, 2008 8:28 PM

  • Workflow - Purchase order Release strategy

    Hi All,
    Good Morning
    I had created workflow for Purchase order release strategy with steps(To Determine Agents, Release of Purchase order, Release of PO effected) and in Me21N I created PO and PO came to my SAP inbox(SBWP) and I released that PO and saved it.
    but My problem is after releasing PO when I checked my Inbox again still that PO is sitting there, it is supposed to disappear from there
    Can anyone please assist me to resolve this issue .
    Thanks in advance.

    Hi,
    In standard SAP workflow, SAP is sending a mail item (notification) to SAP mail inbox. There is no action is required from there. So mail will remain their as mark as read. If you want to remove it than one needs to delete it from respective mail box.
    Best Regards,
    Bhagat

  • Workflow activation for PO release

    Hi Guru,
    How to activate workflow for Purchase order Release,
    Requirement is like 3rd level is rejecting the purchase order, how to communicate to the 2nd and 1st level with rejection reason.
    Can I have some configuration guide?
    Waiting for your reply.
    Thanks,
    Samir Bhatt

    http://www.sap-img.com/workflow/workflow-of-purchase-requisition-release-strategy.htm
    Use the Above link Else go to saptechnical dot com Website and Click on Business Workflows then Workflow Scenario Configuration Here you will find the Detail Configuration of Workflow with Screenshots.
    Regards,
    Ashok

  • Internal order budger in SRM

    Hi,
    We create statistial internal order with budget in SAP, and in SRM we key in IO in account assignment together with PA account assignment.
    But in SRM, the budget display is in PO header data, it only display the IO in the first PO line item.
    and the assigned part of the budget is not right.
    Even all the PO line item use the same IO, the assigned part of the budget calculated by SRM is not right.
    Does anybody meet this before? Is it SRM standard bug?

    Hi,
    Please check internal order released or not.
    Regards,
    Ranjeet

  • Internal Order error in GRN

    Hi Experts,
    While doing GRN of Finished good the following error occurs
    Internal Order entered in not Correct. Please check.
    Message no. /ISDFPS/FDPDAHHM019
    internal order in Finance is ok.
    Please guide .

    Hi,
    Please check internal order released or not.
    Regards,
    Ranjeet

  • Internal order flow in controlling

    Hi all,
    Can please help to know the flow of the internal order
    as well as  cost center .
    i want to know the relation between the tables in  controlling, so
    If possible please provide me the ppt's , screen shorts, etc.
    Thanks and regards
    Ravi

    Hi,
    Please check internal order released or not.
    Regards,
    Ranjeet

  • Problem in Purchase Order Release Workflow

    Hello Experts,
       I am working in a workflow for releasing PO.In this workflow I have created just one activity step type to release a purchase order.Here I have taken PO(BUS2012) object as input parameter.In the activity step type I am using a custom task(TS99900011).In this task I have used BUS2012 as Business Object and SINGLERELEASE as method.Here I have used 3 terminating events of BUS2012 object.They are Released, Reset and significantly changed. I have just copied the standard task (TS20000166).
      Now my activity step has four outcomes.We can see them in Outcomes tab.
    1.Purchase Order Released(Cgy:External Events)
    2.Not Used(Cgy:External Events)
    3.Purchase Order Changed Significantly(Cgy:External Events)
    4.Processing obsolete(Cgy:Internal Events).
    I have set agent assignment as user Manas.
    Now, when I am testing the workflow with a valid PO number as input the work item goes to my inbox for release the PO as expected.There I can release or reject the PO.But while saving after releasing or rejecting the PO the work item still remains in Workspace Inbox.Any of the four outcomes is not appropriate for the activity.
      Can anybody suggest any solution to overcome the situation.
    Are the external events are really helpful in developing workflow activity?Please suggest.

    Hi Manas,
    There is one option, where you can stop the workitem and even entire workflow.
    Use Fork for parllel processing
    Have a Wait step with BUS2105-Significantlychanged event and outcome to the end of workflow.
    Thanks,
    Sudhir.

  • Purchase order release workflow rule

    Hi ,
    I have made a zcopy of standard workflow(WS20000075) for PO release. My requirement is that there are three level of approvers who have to release the PO. MM consultant says he will assign the approvers for all three levels from SPRO. As per the std workflow there is only one level of approval as far as i have understood .every time if approver rejects the po the mail should go to outlook also , to initiator and the next approver . 
    standard rule 20000027 is taken care for all three levels of approvals ..what is the binding for rule to workflow?
    from workflow side what are the customize things should i follow..i am new to this MM workflow can u please guide me ..
    thanks,
    sandeep chennoju .

    Hi Sandeep
    The requirement changed!!!! :-)
    Okay...for the email on DEADLINE BREACH
    1) You Do not need the fork in the deadline branch
    2) Instead, call an Activity Step which calls a method -> Input:  WF Initiator (full US + Username), PO Number and the Current Release code
    3) In the method coding, call rule 20000027 using FM RH_GET_ACTORS, get the agents (with OTYPE) for the PO and Current Release code
    4) Now Fill an internal table (of type TSWHACTOR) with OTYPE and OBJID returned from the above Function Call
    5) Append WF Initiator to this table -> OTYPE = US and OBJID = username
    6) So you have a table with CURRENT Approvers and the Initiator
    7) Pass back this table to task and workflow
    8) Now use a mail step, Set Recipient Type as 'G' (org Object) and EXPRESSION = that TABLE passed from above call (type TSWHACTOR)
    9) Ensure that the settings are done for SO16 -> Tab Mail Sys Grp -> Send to users home address is selected (in each client – this is not transported, hence maintain in every system once)
    10) Ensure that the users have their email ID maintained in User Master (SU01) and the communication Method Set as INT (OR Email is maintained in HR Master Infotype 0105 - if your setup is using that)
    11) Ensure Job SWWDHEX is running periodically in the background
    12) Ensure Basis Settings and send job are in place to send outbound emails
    What will happen when the deadline gets over:
    1) SWWDHEX job will pick up the item and the control will come to deadline branch
    2) The new step/method will get the agents of Current release code using the FM Call; it will also add WF Initiator to the list
    3) The mail step will send to the ORGNIZATIONAL Objects (the Usernames, Positions passed to it in table of type TSWHACTOR)
    4) SO16 settings will ensure that the mail is sent to the email address
    5) Email address is picked up by the system automatically from User Master or HR Info type 0105 (order is really not known)
    6) Basis settings and send job will send the email out of the system
    I hope I was able to get your requirements right this time and these will not change :-)
    Regards,
    Modak

  • Automatically creation of Asset from Internal Order(IO) when Released

    Dear experts,
    In my scenario, we are using IOs (not WBS). When I budget and release the Internal order, it should automatically create the Asset/Asset class(Not AUC)( as in WBS,if we assign Investment Profile).Could this possible?coz' I have not seen the Investment profile as such in IO.
    guide me.
    Thanks,.
    Sanju.

    You have to define investment profile and assign the same to you Internal order the same you can achieve Txn OITA . ( viaSPRO->IM>IO&IM>Masterdata--> Define Investment profile )
    After you have to assign the same to your order .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/f9f588493111d182b70000e829fbfe/frameset.htm
    Regards
    Nitin

Maybe you are looking for