Workflow settings to be taken care of
Hi ALL,
The workflow settings in the SWU3 are not all green...Is it a necessity for them to be all green?? So do I have to regenerate them all to make them green??
-Ken
Hi Ken,
click on the red setting in SWU3 and then F9
(to perform automatic customizing)
Regards,
michal
Similar Messages
-
What are the steps need to be taken care for MM data sources while extrac
what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
RachaHi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328] -
What steps have to be taken care while Transporting.
Please search the forums before posting
Hi
Experts,
Once development is done, what are the steps and procedures should be taken care in order to move to
Maintenance.
Edited by: Arun Varadarajan on Jun 17, 2009 6:37 PMHi
Just make sure you collect all the dependents objects. For example if you are collecting the Infocube then the info objects should be collected along with the infocube or should have sent before sending the infocube.
In case of transformation, both data source and info cube should be transported before transporting transfomation.
In case of infocube the dependent objects are info objects. In case of transformation, the depenedent objects are data source and data target.
Go to Transport connector, to collect the objects in a request by selecting necessary objects option.
Hope it helps.
Regards
Sadeesh -
What are the things taken care while using multiple suites?
Hi all,
I have created a plugin which sends the current file path to an url,
its working fine with debugging in Visual studio 2005 and while it is added to the Adobe Illustrator its works only once.
That is its sending the file path only for one file. While i tried for the second time its not working
I am using following suits in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I am using the "AIURLSuite" for calling the url and it is calling the url multiple times while its used alone, and its only working once with the multiple suites.
What are the things taken care while using multiple suites? , is it neccessary to release all variables and the suites after completing the task?
Should they released in the same order in which they are acquired?
Thanks in advance
Sreejesh K VHi,
The problem was with the "sAIDocument->GetDocumentModified(mod);"
The "GetDocumentModified" is crashing after executing once, i just removed that statement , and now
i am forcefully saving the document with out checking the modification status!
Its working fine now!
Could you please tell me how can we lock a plugin , or a particular function in a plugin.
There is any specific standard to use the GetDocumentModified function?
Thanks and Best Regards
Sreejesh K V -
What are the main steps to be taken care while doing recording for LSMW
Hi,
I am facing problem in LSMW.
Can anybody suggest me that What are the main steps to be taken care while doing recording for LSMW for recording mm01 ?
thanks'
nareshHi,
Recording in LSMW is similar as SHDB.
in LSMW after you give Project-Subproject and Object.
1)Go to-> Maintain Object Attributes -> double click
2)Press Display/Change Button at top left to make editable mode.
3)Select radiobuton -> Batch Input -> Give Recording name say Z_mm01
4) Click the Recording Overview boton on right -> Give TCode which u want to record....
Rest refer the Document link attached.
Please find the links to various threads on the same.
Re: LSMW - Using a BAPI
BAPI, IDOC in LSMW
Upload the data in LSMW using BAPI
This one is the most complete document for the same
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://service.sap.com/lsmw.
Regards
Kiran -
REGARDING WORKFLOW SETTINGS FOR ELM
HI FRIENDS,
I URGENTLY NEED TO KNOW WHAT ARE THE WORKFLOW SETTINGS REQUIRED TO MAKE ELM WORK. I HAVE DEFINED THE TASK WS14000029 AS 'GENERAL TASK' IN T-CODE 'OOCU' BUT NOW I AM GETTING DUMPS WHEN I TRY TO SAVE THE LIST . THE ERROR ANALYSIS IS GIVEN BELOW.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_010
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_010"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
PLEASE HELP,
THANKS,
JAIhi
you need not change the settings of the ELM workflow
you just need to activate it and plcae it as general
regarding you error
RFC destination WORKFLOW_LOCAL_010
just ask your basis guy to maintain this destination in SWU3
your dump will be resolved
see these are standard worflows ,you need not change the settings in normal circumstances
best regards
ashish -
Camera Raw Workflow Settings - where?
Hi!
In Bruce Fraser's and Jeff Schewe's "Camera Raw with .. CS3", p 134, a dialogue box Workflow Options is shown. Likewise, Photoshop CS3 Help > Camera Raw > CR Settings > CR Workflow Options promises "You can see and change these Workflow settings at the bottom of the Camera Raw dialog box."
I wonder which dialog box the text is referring to. I can not see the Workflow dialog box at the bottom of the dialog box shown in Bridge > Camera Raw Preferences, nor in Bridge > Preferences, nor in Photoshop > Preferences, nor in Photoshop > Edit > Color Settings.
All the entrances on the Adobe site only lead me to the same PS Help document.
It would indeed be useful to be able to specify e.g the bit depth as a default, because the PS default seems to be 8 bit (PS > Image > Mode), so I have to remember to set it to 16 for every single image anew.
I use Mac 10.4.11 on a MacBook Pro, 2GHz processor, 2GB RAM , PS CS3, ACR 4.5
Thanks for help! Hening.>Well, the save button is alongside the hyperlink (to it's left) and that opens a fresh panel to allow various options to be set, so I find the explanation advanced by the ACR Team bit hard to understand.
You running a display at 1024 x 768? Because that's Camera Raw's real estate minimum that HAS to be supported...so what you can do in a dialog whose display ends up at a much higher resolution is severely limited because of the minimum requirements. That's why... -
A group has created some out of the box SP 2010 workflows in a standard document library.
Some users have the "Workflow Settings" icon available to click on, but other staff only see a grayed out icon.
I have been trying to determine what change is needed to a user's access to the library so that they can add or access workflows.
Thank youI believe it is the "Manage Lists" permission that they need. Owners and Designers permission levels have this by default.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Things to be need to taken care in Rollout
Hello Guru,
I am doing rollout for PM. I am aware of customizations required to do for PM but little bit confusing from accounting side. that how & which are the things we need to maintain related to accounting in PM so that we will get all accounting/costing related data from transaction.
Could you plz suggest me few tips/links which we need to taken care in rollout.
Thanks in advance.
Regards,
Amol.Hi Sir,
Rollout you need to follow your template also the change must accommodate with global team.
related with CO should be Activity type & Cost center that assign to cost center.
Hope will help you.
Thank you. -
Dear Folks,
What is the Procedure to configure CUSTOMIZED WORKFLOW SETTINGS in SRM-EBP.
Thanks,
Kishor .Hi Kishor,
you find the setting by this path,
IMG Path: Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> SAP Business Workflow (New) -> SRM Workflow Settings -> Workflow Settings -> Define Process Levels.
Procedure to follow,
1.Activate the link WS40000014
GO to customising overview and the set the General task as per the requirement
2.define the process levels
3.Next to Evaluate the process levels for object type BUS2121
4.Define the process level schems
5.Finally do the proces level configuration.
hope this may help you. reward points if satisfied.
Regards,
Satish -
Substitution Problem in Workflow settings
Hi,
We are trying for automatic forwarding of work item from one sap user Inbox to other sap user Inbox using substitution in workflow settings. I am getting work items in both users Inboxes. My requirement is work item should appear in substituted users Inbox. Please suggest.
Thanks in advance,
Ganga Bhavani.
Edited by: Ganga Bhavani Bhimavarapu on Aug 14, 2008 1:23 PMHi Bhavani,
Refer below links
http://themisto.jupiter.txstate.edu/fastrain/content/pt-30b_sbwp_workflow%20inbox%20substitution_sapgui/cc/html/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d5/581ee8d56f1247bf34cfcd66d16d81/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
https://www.sdn.sap.com/irj/sdn/nw-bpm?rid=/webcontent/uuid/10ff0453-ae33-2a10-7984-9d8df609d8f9
Regards,
Syf
Edited by: syfulla shaik on Aug 14, 2008 5:19 PM
Edited by: syfulla shaik on Aug 14, 2008 5:21 PM
Edited by: syfulla shaik on Aug 14, 2008 5:28 PM -
Message " not taken care size (format) of image"
Hello,
I possess Aperture 3.5.1 and Mac OS X (mavericks) and plug-in Border fx, collection NIK softwave. (My camera is a Canon 6D). I use 2 Internet browser : "safari" and "chrome".
For several months, very often, when I move on miniatures, in particular after the use of Border fx, the image RAW becomes black with the message " not taken care Size(Format) of image ". I must to leave Aperture, to open him again, to open in full screen the image in error, so that it displays again.
Have you got a solution?
Thank you for your help.A quick update - I had a 28k jpg, which when saved to the database in the dodgy format is 33k. I found if extract this and save (via ImageIO.write) to disk as a PNG, it is now apparently a 'standard' format (also loads ok in web browser), however the size is 400k! If I load that png file (using ImageIO) off disk and save back (using ImageIO), the size is 33k again and it's reverted to the broken format! How is this so?
I've found if I load the png and save as jpg, both steps with the old JIMI api, it converts back to a 28k jpg which seems to be totally ok. (We use the Jimi api for conversion of .pict files.)
Any ideas what is going on? -
So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?
This is a user to user technical support forum. It is not our responsibility to convince you of anything.
Do you actually have a technical support question? If not, post your question on a blog or somewhere more appropriate.
Best,
GDG -
What are phantom materials and assembly... how are they taken care during M
Hello Gurus
what are phantom materials and phantom assembly... how are they taken care during MRP runHi
Phantom assembly is the logical assemble. You have to define special procurement type in mateiral master as 50 to make the item as phantom.
When you make the item as phantom when running mrp BOM will explode for the phantom <b>ONLY child materials requirements will be generated</b>.For phantom assembly planned order will not be generated.
A phantom assembly is a logical grouping of materials. A phantom assembly is usually created within engineering, in order to describe a number of components easily and manage them as a whole. The components in a phantom assembly are placed immediately into the superior assembly. As opposed to this, components in an assembly are first assembled to produce the header material. After this the header material is placed into the superior assembly.
Example: The phantom assembly "set of wheels" contains the components "front wheel" and "rear wheel". The front and rear wheels are placed immediately into the "bicycle" assembly. The "light" assembly contains the materials "bulb" and "reflector". The light components are first assembled and then the light is attached to the bicycle.
Regards
Ranga
null -
Portal internal workflow - don't have Workflow Settings menu item
Hi All,
I am a new to webcenter portal and got a problem when trying to configure internal workflow.
According to the oracle document, "http://docs.oracle.com/cd/E29542_01/doc.1111/e27603/cont_workflow.htm#WCPAA11225"
it should have an "Workflow Settings" menu item in the folder details page.
But my webcenter portal don't have it.
attached is my screenshot.
Any comments, suggestion or information are welcome.
thanks
BrightI've got an exception from UCM log. but I can't reproduce it anymore
<Jan 8, 2015 3:29:07 PM GMT-08:00> <Error> <oracle.ucm.idccs> <UCM-CS-060003> <Event generated by user 'weblogic' at host 'CIS'.>
<Jan 8, 2015 3:29:07 PM GMT-08:00> <Error> <oracle.ucm.idccs> <UCM-CS-000001> <general exception
intradoc.common.ServiceException: !csWfRetrieveInfoError,app1WCSingleApprover!csWfDoesntExist,app1WCSingleApprover
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2173)
at intradoc.server.Service.buildServiceException(Service.java:2402)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2396)
at intradoc.server.ServiceRequestImplementor.testAndCreateServiceException(ServiceRequestImplementor.java:2068)
at intradoc.server.Service.testAndCreateServiceException(Service.java:2361)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1728)
at intradoc.server.Service.doAction(Service.java:564)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1483)
at intradoc.server.Service.doActions(Service.java:559)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1415)
at intradoc.server.Service.executeActions(Service.java:545)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:751)
at intradoc.server.Service.doRequest(Service.java:1974)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:486)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Maybe you are looking for
-
Hello-- I'm trying to figure out how to connect my 15" MacPro Book from early 2008 to a Sony flat screen TV monitor. I've been told I need a "Mini DisplayPort to HDMI Adapter" and a "HDMI to HDMI" cable, but I've also been reading that some cables on
-
Hi, I'm trying to work out how to open an email link in a different/new page with losing the page that I am on!? Can anyone please help me??? At the moment if I hit an email link it will go to my gmail compse page by replacing the page that I am on,
-
Can I make an ebook on aperture?
Is it possible to make an ebook or convert an existing photo book in Aperture to an ebook?
-
Upgraded to CS4, missing Version Cue
I've seen others posing similar questions, but none seem to get answered. My office has been working off of CS3 for quite a while and Version Cue has been our primary asset management system. We have one VC server and not had problems with it. A few
-
Problem with my Zen touch USB connection. Help need
Hey, I have a problem, my usb connection is damaged so I can't send songs to my ZEN TOUCH anymore...can I do something with it's? /warranty are not working/Message Edited by Jason-CL on 06-09-2006 0:4 AM