Workorders Wrongly created without any measurement documents entry in SAP.
Gents,
Issue :- Counter Based Prev Mnt plan is setup in 2007 with a strategy of cycle intervals(160, 600, 700, 2000, 2100 & 4200 Hour's)& Last counter readings were documented on 23.08.2012, No further entries or changes are made either in M.plan(29284) or Counter(24096), Checked the same via PM Tables. But on 01.02.2014 system has generated 3817 maintenance orders created by itself via scheduled background jobs.
My doubt is we have maintained the Annual estimate reading as 7000Hr's in Measuring point 24096 - Does system calculates by itself w.r.t cycle intervals on Annual basis & generate the maintenance orders ??
Let me know the root cause or suitable solution to resolve this in future M.plans..
Thanks in Advance !
Regards,
Vishal Singh
Maheswaran,
Thanks for your Prompt Solution !
I came through another issue in System - When we are setting an DLF or INAC on Equipments the attached M.plan is not automatically setting to INAC/DLF and Based on cycle frequency the work orders are generated for DLF/INAC equipments.
Let me know if these any configuration setting required for this..
Regards,
Vishal Singh
Similar Messages
-
Delivery without any reference document
Hi,
Would like to know how this scenario can be handled in SAP:
customer picks up the stock in warehouse (without picking,packing,outbound delivery) and direct invoicing is done.Can we map this process in SAP ,where we can by pass picking,packing.Hi,
you can do delivery without any reference document.
1) T.Code - VLO2NO
Create delivery without reference and do PGI
2) VF01 -Invoice against delivery
Or
you want to create billing with external document, follow this links
http://help.sap.com/saphelp_40b/helpdata/en/dd/56159a545a11d1a7020000e829fd11/content.htm
Regards
Vijai Jain
Edited by: Vijai Jain on Apr 15, 2009 11:09 AM -
Create Notification from Measurement Document IK11 (user-exit IMRC0001)
Hi Experts,
I have to create Create Notification from Measurement Document (IK11) using user-exit IMRC0001. I have some doubts regarding this.
1) what is the function module to create notification from Measurement Document.
2) can u give the table name to see Measurement Document.
3) where we can see the measuring reading field names to create Measurement Document.
Thanks.................
B Z.hi check this....
table for measurement IMRG
http://help.sap.com/saphelp_nw04/helpdata/en/af/cb5447461411d189f20000e81ddfac/frameset.htm -
Pivot table without any measure columns
Hi,
I have a requirement where all my report columns are from Dimension tables and i have no measure to display in the report.
But I need to create a Pivot table view for this requirement.
Can someone help me how to represent results in Pivot Table view without measure columns
Thanks in Advance.Hi Sri,
Try this it will work.
Add a dummy column in your measure section.
then in pivot view --> measure section --> dummy column -->more options -> format heading -->custom css style --> mark use custom css and give display:none
and
more options -> format measure values -->custom css style --> mark use custom css and give display:none
Thanks
Diney -
Can a prompt be created without any reference column?
Hi,
here is my requirement..
Prompts:
======
Tested in ==> should display 3 values as date1, date2, date1&date2 in a dropdown. This column is not available in any of the tables. I have to hard code it.
test Date1 ==> calender prompt
test Date2 ==> calender prompt
columns :
======
product
test date1
test date2
When I Select date1 in tested in prompt, the report should display values only for date1 and not date2. Likewise when date2 is selected in tested in prompt, the report should display values only for date2 and not date1. And when date1&date2 is selected the report should display records containing both date1 and date2.
The date columns are present in my fact table. It contains 48 million records. I have created tested in column in the BMM layer. when i pulled the same in dashboard prompt, its taking much time and the server goes down after some time.
If anyone has come across such requirement please let me know the approach
Thanks.Hi,
I think your requirement is similar as described here:
http://obiee101.blogspot.com/2009/04/obiee-dynamic-prompt-content.html
Regards,
Stijn -
SC created without any warning or error message
Hi,
I'm working with SRM 5.0, classic scenario.
Problem is following:
I create a SC for a specific material for storage location A for example. But this specific material wasn't created for storage location A. SRM doesn't block my SC cart created neither give me any warning or error message.
After SC goes into error into shoppingcart monitor indicating that this specific material wasn't created for storage location A.
Is this normal SRM behaviour? I don't think so...
Can I activate any warning or error message in order to avoid this?
Thanks a lot,
regards,
carolineHi
This seems to be normal behaviour.
Please check for errors, dumps etc. using BBP_MON_SC, RZ20, and ST22 Transactions, if any.
You need to use BBP_DOC_CHECK_BADI for issuing Warning / Error messages.
Implement BBP_DOC_CHECK_BADI for filter type - BUS2121 (Shopping carts) and get the job done.
P.S. Carefully read the Standard SAP Documentation of this BADI using SE18 Transaction.
Hope this will help. Do let me know.
Regards
- Atul -
Creating and using new Document Series in SAP B1- URGENT
"I want to use two different series in the same period in SAP B1 other than the default series. But whenever I am trying to do it i am unable to use both the series and at one time. Only one series is accesible even if I use the option "set default series for certain users."
Further elaboration - I handle retailers and wholesellers in my business process.I want to use two series Retail and Wholesale for the two different classes whenever I make an Invoice. So that the class of the document is seperated by the series.Debraj,
In Admin - System initialisation - Document Numbering go to relate series document and choose A/R Invoice by double clicking it. Now the Series A/R Invoice will open. In that window click on new. It will go into Numbering series set up. Here go the the particular row in the first column give the series name as Wholesale and enter the first no.and the last no.and give the period indicator as default. Now right click on that row and addnew row you will be taken to the next row where in again you can name a series and the last and the first no.
Hope this answers your question.
Nagesh. -
Can't create a new system logon entry with SAP Logon 710
problem solved
Edited by: steiner fisher on Nov 7, 2008 3:36 AMI trashed old preferences and now everything works well,
hopefully those with mail problems can fix it this way,
Thank you
Francisco -
Goods Return without any Document
Hi all,
I tried Goods Return (Sales) without any reference document (Invoice). The goods have received in warehouse in proper storage location and ATP(Available To Promise) is also increased. The only problem is Credit note cannot be generated. I tried to create credit note manually, but no result.
Tcode used : VA01
Order Type : ZG2
Returns with ref. to : w/o Original
Please tell me how to get credit note in this process.
Thanks,
KaranHi Karan,
Please provide the error log upon processing credit memo in reference to your return delivery.
iessa -
CS/SD - Link from transactions: Measurement Document x Notification?
Hello all,
vs: SAP ECC 6.0
I need to create the following Customer Service process:
It is created Measurement Document based on a counter reading. For that we use transaction Measurement Document (tcode = IK11/ IK12 IK13)
Process I need to create:
From each Measurement Document we must create a Sales Order (tcode = VA03).
Relation One to One - 1 Measurement Document will generate 1 Sales Order.
From Notification transaction (IQS2), it is possible to create a Sales Order. That is fine! Then I am thinking to use this functionality.
My question is:
How is done the LINK from transaction Measurement Document (tcode = IK12/ IK13) to transaction Notification (IQS2), Is there any standard solution (transaction) to do that link?
Many thanks in advance,
Barbara
Edited by: Barbara Barbos on Sep 18, 2008 5:26 PMWow Stephan,
Many thanks for your answer.
I already tried and YES....
- from create Notification transaction (IW51), I created tha Measurement Doc and after this I created the Sales Order from the same same IW51 transaction.
100% helpfull answer.
Thanks again & regards,
Barb -
Hi All,
How do you make changes to the counter readings in measurement documents? Coz I have tried accessing in change mode but the counter readings are locked already. For example if I have erroneously inputted a counter reading and want to correct it. How can that be done?
Thanks
Andrewhi
you can reverse the measurement document you have entered previously ,kindly check [Edit Measurement Document |http://help.sap.com/saphelp_47x200/helpdata/en/d8/1c9c96876e11d19d920000e8323350/content.htm]
regards
thyagarajan -
.Whether any FI document will be created during PO?If pl mention entry also
.Whether any FI document will be created during PO?If pl mention entry also
Venu:
Do you mean FI postings/entry during PO creation? If yes, then, no FI postings/entry occur during PO creation. PO creation originates in MM. Not linked with FI at that stage.
Vj
Assign points if info helps -
Error while creating measurment documents for a counter (counter based strategy Plan)
Dear Experts
Pl suggest the possible solution for below case
I have a counter based preventive maintenance Plan of 100km, 200km,..... with op1,op2,..... respectively.
Now I have done maintenance for 600 km and going to enter another reading in IK11.
Here, system is giving error
Counter reading in doc. 251591 larger than in subsequent doc. 251585
Message no. IR171
Diagnosis
No counter overflow reading has been defined for the measuring point, and the counter reading that you have entered is larger than the one in the subsequent measurement document.
This is not allowed, since the counter is not marked as running backwards.
System Response
Processing will not be continued.
Procedure
Check your entries and the counter data of the measuring point.
screen shot for measurement document earlier created is asHi Akhilesh
okay . I have not found any error in my last and current reading date and time
screen shot is attached again here for ur reference
now, what thing I have to checked, pl suggest. -
I created a book on iPhoto. I click on the buy button, and I get a message that says Connecting with a moving blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times and I get this same message each time. Any ideas about what is going on?
First confirm that you can create a PDF file of your book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. Post back with the results.
OT -
I need an uncompressed file so I can use the resulting PDF to do a find/replace. Can't do it with compression.
Thanks
JDRHC1115Dave,
Thanks for the reply. Of all the suggestions I've received this seemed to
be most promising. I gave it a try and the problem is that when I attempt
to save as optimized a message box pops up and says I have to save my
document first. Low and behold when I save it, compression occurs. Even
when I select the options you suggest I'm left with a compressed document.
I'm using Acrobat Pro X
Jeff
From: Dave Merchant <[email protected]>
To: Jeff Ross <[email protected]>
Date: 01/06/2011 09:35 AM
Subject: Is it possible to create and save a .PDF
without any compression to the resulting .PDF?
You don't want the UncompressPDF plugin - that's designed to split out the
COS objects but doesn't remove the Flate encoding (plus if you've never
compiled a plugin before, it's not really the time to learn).
Instead, simply save your PDF file using the PDF (Optimized) file type,
click the Settings button and under "Clean Up" - "Object compression
options", choose "Remove compression". Turn everything else off if you
want to retain the PDF content exactly as it was before.
Your document-level scripts will then be in the file as plain text.
Maybe you are looking for
-
I am on OS X 10.5.8 but want to upgrade to mavericks.
I am on OS X 10.5.8 but want to upgrade to mavericks. I purchased mountain lion so I could install it and then upgrade to mavericks but can't redeem my purchase voucher as I have to do it in the Mac App Store which I can't access on 10.5.8. Can anyon
-
I'm trying to download elements 10 from disc but keep getting error message 1935,
I've tried removing AVG ant virus software but still no joy, any ideas?
-
Using images in an HTML message
Dear All, I want to embed 2 .gif files as part of the HTML message which is being sent from one client to another..My clients want me to give them the same effect as Outlook express utility: New Using->Select Stationery->Filename...so that the text c
-
downloaded the darkness 2 on my 27 incn mac 3.2 ghz intel core i3 and 4 gb memory it wont start up and gives no error code need it fixed or refund money please help Heber
-
Query on retrieving data back to the program from ALV List
Hi Group, I have a requirement to send the details of the selected data as an ALV list to the user. Then, the user selects either 1 or 2 or all or none back to the program from the ALV. Thing is that, 1) when the user selects ( Icon ) to choose all t