Write file in different fonts

how can i write a text file using more than one fonts or can i write some text in bold and some text in normal font.

is it to open with word? or just in your java
application?
cuz you could use html to save the file and view it
as a html file?yes, the file has to be opened in word and the end user will edit that file and my application will use it again later on.

Similar Messages

Font in pdf and in Ai are different. Same file but different font.

Hi
I have trouble with font in illustrator and pdf.
A customer sent me both Ai and Pdf files, the text are totally different.
When I open the illustrator there is one font (Arial Narrow Bold), but when i view the pdf using adobe acrobat the text has changed to another font (Myriad Roman).
The correct font is Arial Narrow Bold.
It is very unprofessional to ask customer everytime what font they are using when they already provide me the Ai files.
I want to know what happen when converting to pdf. Are there any setting in pdf I should be aware of ? so I can tell customer next time to avoid this mistake.
Pls help I really need to know the answer to this. Thank you so much!!

Hi Mylenium,
Thank you for your reply.
Can you let me know where is this setting and what to select or deselect??
Thanks so much!

Unable to write files in different m/c in LAN using utl_file package

I need to dump some files generated by utl_file package in a separate m/c not in the db server.For that I tried using utl_file_dir='*' and mapped the specified directory in the db server. but its failing as show below..
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 449
ORA-29283: invalid file operation
ORA-06512: at "ANIRBAN.WRITE_IN_FILE", line 9
ORA-06512: at line 1
The prototype sp is given below..
CREATE OR REPLACE PROCEDURE write_in_file(pInDir IN VARCHAR2,
pInFileName IN VARCHAR2,
pInFileContent IN VARCHAR2) IS
vFile UTL_FILE.FILE_TYPE;
vFileName VARCHAR2(20) := pInFileName;
BEGIN
dbms_output.enable(1000000);
vFile := UTL_FILE.FOPEN(pInDir, vFileName, 'w', 32000);
UTL_FILE.PUT_LINE(vFile, pInFileContent);
UTL_FILE.FCLOSE(vFile);
END write_in_file;
With this sp i'm able to write in genuine drives but not in mapped one.What shall be done to be able to write in a separate m/c freely.Plz guide me

And make sure you specify the full path name of the server/directory path rather than using substituted drive names as is can sometimes be funny about that sort of thing.

Write file to directory

Hi,
all the while i am able to write file to different apps directories...
just recently i asked Basis to create one more directory for which i am not able to write file...
I tried to put the same file in older directory, which i am able to do.
i tried CG3Z to keep the file but in vain and finally i tried command promt to put the file there the message is no authorizations...
Mainly my question is:
Is it possible to restrict USER ID for particular directory?
Where can i check the authorizations...

Hi,
As per my understanding i should have
S_DATASET
S_RZL_ADM
Can anyone suggest me!

StarOffice 8 - finding all different font types in a Writer file

Hello,
I am currently using StarOffice 8 on a Windows XP system.
I frequently transfer a large Writer (.odt) file between different computer systems as I constantly update the file with new information. As part of the updates, I use different fonts. As I install a particular font on one machine, this font may not be installed on another machine when I add new information to the file on that particular machine.
When I open the Writer file on a machine that has some font not installed, the WYSIWYG appears incorrectly (since the proper font is not installed on that computer, of course) but if you highlight the incorrectly-displayed info, it says what the font type should be (ie, "WP Hebrew David" font). I then go online to download that specific font type for this the computer. Then the data is displayed correctly.
When you have many, many different font types used in a file, it is hard to keep track of all different fonts used. Before anyone questions me on using so many different fonts in a file, it is important for my file to visually display the correct data, and this means using a quantity of fonts.
What I am wondering is the following:
Is there a way from within StarOffice 8 to scan a particular file and then let the user know every different font name used in that file?
That way, if the file contains a font which was used on another machine but not currently installed on the current machine -- when I am updating information in the file -- I can then see a list of fonts used and then install new fonts accordingly after checking to see if they are installed (by checking the Fonts folder in C:/Windows)
I hope this makes sense, or is it "clear as mud"?
Please excuse my bad English grammar as I am not a native English speaker, but have picked it up living in Canada for the last 20 years :-)
Cheers & thanks in advance for any help !
David
Edited by: Broad_Arrow on May 18, 2009 11:18 PM

May 20 2009
There is a Fonts Used macro writer_printAllFonts.sxw Further checking this is the wrong StarBasic macro. The one I use came from an OOo forum I think. I use it with SO7, SO8 and SO9.
It is at the end of this message. To install it:
[1] Copy the macro below to the clipboard
[2] Go to Tools>Macros>Organize Macros>Basic>Standard
Select New. Highlight what is there, paste, and close.
[3] Go to Tools>Customize>Menus>Tools
Highlight Word Count, then go to Add>Macros>My Macros>Standard>Module1
Highlight FontsUsed, Click Add, Close, Ok
Phil
REM ***** BASIC *****
Sub Main
End Sub
Sub FontsUsed 'Version 1 John Vigor 4/25/06
'List fonts used in Writer document. Appears to work in normal text,
'Sections, normal Tables, and Frames. Will currently crash on a Table
'within a Table.
oDoc = ThisComponent
Dim fonts as Integer: Dim aFonts(1)
oTC = oDoc.Text.createTextCursor
oTC.goRight(1,true) : CurrentFont = oTC.charFontName
fonts = fonts + 1 : aFonts(fonts) = CurrentFont
REM Do "normal" text.
partEnum = oDoc.Text.createEnumeration
PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
REM Do Frames.
oFrames = oDoc.getTextFrames
If oFrames.Count > 0 then
fonts = fonts + 1 : ReDim Preserve aFonts(fonts)
aFonts(fonts) = "NEW FONTS, IF ANY, FOUND IN FRAMES:"
For I = 0 to oFrames.Count - 1
thisFrame = oFrames.getByIndex(I)
partEnum = thisFrame.createEnumeration
PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
Next
EndIf
REM Prepare list.
For I = 1 to fonts
s = s & aFonts(I) & Chr(10)
Next
iAns = MsgBox(s,4,"FONTS FOUND. Create font list document?")
If iAns = 7 then
End
Else
NewDoc = StarDesktop.loadComponentFromURL("private:factory/swriter"," blank",O,Array())
oVC = NewDoc.CurrentController.getViewCursor
oVC.String = s : oVC.collapseToEnd
EndIf
End Sub
Sub PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
While partEnum.hasMoreElements
thisElement = partEnum.nextElement
If thisElement.supportsService("com.sun.star.text.Paragraph") then
portionEnum = thisElement.createEnumeration
PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
ElseIf thisElement. supportsService ("com.sun.star.text.TextTab le") then
Cols = thisElement.getColumns.Count - 1
Rows = thisElement.getRows.Count - 1
For C = 0 to Cols
For R = 0 to Rows
thisCell = thisElement.getCellByPosition(C,R)
cellEnum = thisCell.createEnumeration
While cellEnum.hasMoreElements
thisPara = cellEnum.nextElement
portionEnum = thisPara.createEnumeration
PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
Wend
Next
Next
EndIf
Wend
End Sub
Sub PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
Dim found as Boolean
While portionEnum.hasMoreElements
thisPortion = portionEnum.nextElement
thisFont = thisPortion.charFontName
If thisFont <> CurrentFont then
For I = 1 to fonts
If aFonts(I) = thisFont then found = true: Exit For
Next
If found then
CurrentFont = thisFont : found = false Else
fonts = fonts + 1 : ReDim Preserve aFonts(fonts)
aFonts(fonts) = thisFont : CurrentFont = thisFont
EndIF
EndIf
Wend
End Sub

Write arrays into a text file in different columns at different times

Hi,
I have a problem write data into a text file. I want to write 4 1D arrays into a text file. The problem is that I need to write it at different time and in different column (in other word, not only append the arrays).
Do you have an idea to solve my problem?
Thank you

A file is long a linear string of data (text). In order ro insert columns, you need to rewrite the entire file, because colums are interlaced over the entire lenght of the file.
So:
read file into 2D array
insert columns using array operations
write resulting 2D array to file again.
(Only if your colums are guaranteed to be fixed width AND you know the final number of colums, you could write the missing columns as spaces and then overwrite later. Still, it will be painful and inefficient, because column data are not adjacent in the file.)
LabVIEW Champion . Do more with less code and in less time .

Illustrator's font is different for some reason and hard to read, I need to change it so i can read all the tabs and file names. Like file, edit, options, type, select, effects..... swatches, layers.. every tab is in a different font that is hard to read

Illustrator's tabs are all in a different font that I can read.
I need to know how to change it so I can get back to a steady workflow.
For example..
File, edit, options, type, select, effects, view, windows, help..... pathfinder, layers, swatches, stroke, and the file name (all the tabs)
are all in a different font, I don't know how it got changed but now it is different.
This is a shared computer so someone might have changes it on accident but I'm not sure.

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Media Encoder export a different font from the project file

HI
Media Encoder export a different font from the project file when I use a installed font
The problem doesn't occur when exporting directly from Premiere
Any ides why?
Thanks

Hi! This also happened to me quite a few times with different fonts. Your fix worked, thank you. I don't think it's the font since, like I said, it happened with a few fonts, but just in case I was using Mf Young & Beautiful in TTF format.
Are there any side effects to turning off "import sequences natively"?

How to be able to print on reply in color and different font

I want to be able to send e mail relpys in color or a different font.

Do you currently use HTML formatting?
Don't know or unsure?
'Tools' > 'Account Settings' > 'Composition & Addressing' for the mail account
or
'Menu icon' > 'Options' > 'Account Settings' > 'Composition & Addressing'
Select 'Compose messages in HTML format'
click on 'OK'
See second image below as an aid.
If yes, then you should see the 'Formatting bar' in a 'Write' window.
If you cannot see it, maybe it needs to be enabled:
View > Toolbars > Select 'Formatting Bar'
see first image below.
Anything set via the Formatting Bar will only be used in that email.
For helpful info at this link:
* http://en.flossmanuals.net/thunderbird/composing-messages/
There is also an addon which can be used to auto quote colours in eg: Replies.
* https://addons.mozilla.org/en-us/thunderbird/addon/quote-colors/
download to desktop or downloads folder.
How to install:
In Thunderbird
Tools > Addons
or
Menu icon > addons
click on gear wheel icon and select 'Install addon from file'
see third image below.
Locate the file you just downloaded and click on 'Open'.
You may need to restart Thunderbird.

JNI Invocation: open file in Java, write file in CPP

Hello,
Warning: I am a dunce, bad CPP code ahead!
Using JNI invocation, I am trying to read a binary file in Java and write it in CPP.
Everything compiles and runs without error, but the input and output jpg files are of course different.
TIA to any help,
kirst
(begin ByteMe.java)
import java.io.*;
public class ByteMe
    // Returns the contents of the file in a byte array.
    public byte[] getBytesFromFile(String strInfo) throws IOException
        System.out.println("Testing:" + strInfo);
        File file = new File("1.jpg");
        InputStream is = new FileInputStream(file);
        // Get the size of the file
        long length = file.length();
        // Create the byte array to hold the data
        byte[] bytes = new byte[(int)length];
        // Read in the bytes
        int offset = 0;
        int numRead = 0;
        while (offset < bytes.length
               && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
            offset += numRead;
        // Ensure all the bytes have been read in
        if (offset < bytes.length)
            throw new IOException("Could not completely read file "+file.getName());
        // Close the input stream and return bytes
        is.close();
        return bytes;
    public ByteMe()
          //System.out.println("in constructor");
}(end ByteMe.java)
(begin ByteMe.cpp)
#include <stdlib.h>
#include <string.h>
#include <jni.h>
#include <windows.h>
// for file operations:
#include <fstream>
int main( int argc, char *argv[] )
     JNIEnv *env;
     JavaVM *jvm;
     JavaVMInitArgs vm_args;
     JavaVMOption options[5];
     jint res;
     jclass cls;
     jmethodID mid;
     jstring jstr;
     jobject obj_print;
     options[0].optionString = "-Xms4M";
     options[1].optionString = "-Xmx64M";
     options[2].optionString = "-Xss512K";
     options[3].optionString = "-Xoss400K";
     options[4].optionString = "-Djava.class.path=.";
     vm_args.version = JNI_VERSION_1_4;
     vm_args.options = options;
     vm_args.nOptions = 5;
     vm_args.ignoreUnrecognized = JNI_FALSE;
     // Create the Java VM
     res = JNI_CreateJavaVM(&jvm,(void**)&env,&vm_args);
     if (res < 0)
          printf("Can't create Java VM");
          goto destroy;
     cls = env->FindClass("ByteMe");
     if (cls == 0)
          printf("Can't find ByteMe class");
          goto destroy;
     jmethodID id_construct = env->GetMethodID(cls,"<init>","()V");
     jstr = env->NewStringUTF(" from C++\n");
     obj_print = env->NewObject(cls,id_construct);
     // signature obtained using javap -s -p ByteMe
     mid = env->GetMethodID(cls, "getBytesFromFile", "(Ljava/lang/String;)[B");
     if (mid == 0)
          printf("Can't find ByteMe.getBytesFromFile\n");
          goto destroy;
     else
          jbyteArray jbuf = (jbyteArray) env->CallObjectMethod(obj_print,mid,jstr);
          jlong size = jsize(jbuf);
          printf("size is: %d\n", size); // size shown in output is
          std::ofstream out("data.jpg", std::ios::binary);
          out.write ((const char *)jbuf, 100000);
     destroy:
         if (env->ExceptionOccurred())
            env->ExceptionDescribe();
    jvm->DestroyJavaVM();
}(end ByteMe.cpp)

Hello,
Me again. Well, not such a dunce after all. Here is code that works correctly, and compiles with no errors and no warnings.
Will much appreciate help with clean-up code.
TIA,
kirst
(begin ByteMe.java)
import java.io.*;
public class ByteMe
    public long getFilezize(String strInfo) throws IOException
          // demonstrates String parameter passed from CPP to Java:
          System.out.println("(getFilesize) Hello world" + strInfo);
          File file = new File("1.bmp");
          InputStream is = new FileInputStream(file);
          // Get the size of the file
          long length = file.length();
          is.close();
          return length;
    // Returns the contents of the file in a byte array.
    public byte[] getBytesFromFile(String strInfo) throws IOException
        System.out.println("(getBytesFromFile) Hello world" + strInfo);
        File file = new File("1.bmp");
        InputStream is = new FileInputStream(file);
        // Get the size of the file
        long length = file.length();
        System.out.println("length is: " + String.valueOf(length));
        // Create the byte array to hold the data
        byte[] bytes = new byte[(int)length];
        // Read in the bytes
        int offset = 0;
        int numRead = 0;
        while (offset < bytes.length && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0)
            offset += numRead;
        // Ensure all the bytes have been read in
        if (offset < bytes.length)
            throw new IOException("Could not completely read file "+ file.getName());
        // Close the input stream and return bytes
        is.close();
        return bytes;
    public ByteMe()
          //System.out.println("in constructor");
}(end ByteMe.java)
(begin ByteMe.cpp)
          Signature obtained with command:
               "C:\Program Files\Java\jdk1.5.0_15\bin\javap.exe" -s -p ByteMe
               Compiled from "ByteMe.java"
               public class ByteMe extends java.lang.Object{
               public long getFilezize(java.lang.String)   throws java.io.IOException;
                 Signature: (Ljava/lang/String;)J
               public byte[] getBytesFromFile(java.lang.String)   throws java.io.IOException;
                 Signature: (Ljava/lang/String;)[B
               public ByteMe();
                 Signature: ()V
     Compiled VC++ 2005 Express, run on Vista
#include <stdlib.h>
#include <string.h>
#include <jni.h>
// file operations
#include <fstream>
int main( int argc, char *argv[] )
     JNIEnv *env;
     JavaVM *jvm;
     JavaVMInitArgs vm_args;
     JavaVMOption options[5];
     jint res;
     jclass cls;
     jmethodID mid;
     jmethodID sizeid;
     jstring jstr;
     jobject obj_print;
     jlong filesize;
     options[0].optionString = "-Xms4M";
     options[1].optionString = "-Xmx64M";
     options[2].optionString = "-Xss512K";
     options[3].optionString = "-Xoss400K";
     options[4].optionString = "-Djava.class.path=.";
     vm_args.version = JNI_VERSION_1_4;
     vm_args.options = options;
     vm_args.nOptions = 5;
     vm_args.ignoreUnrecognized = JNI_FALSE;
     // Create the Java VM
     res = JNI_CreateJavaVM(&jvm,(void**)&env,&vm_args);
     if (res < 0)
          printf("Can't create Java VM");
          goto destroy;
     cls = env->FindClass("ByteMe");
     if (cls == 0)
          printf("Can't find ByteMe class");
          goto destroy;
     jmethodID id_construct = env->GetMethodID(cls,"<init>","()V");
     printf("%s\n",id_construct);
     jstr = env->NewStringUTF(" from C++!\n");
     if (jstr == 0)
          // Normally not useful
          printf("Out of memory (could not instantiate new string jstr)\n");
          goto destroy;
     obj_print = env->NewObject(cls,id_construct);
     //BEGIN BLOCK to get file size
     sizeid = env->GetMethodID(cls, "getFilezize", "(Ljava/lang/String;)J");
     if (sizeid == 0)
          printf("Can't find ByteMe.getFilezize\n");
          goto destroy;
     else
          printf("got here\n");
          filesize =(jlong) env->CallObjectMethod(obj_print,sizeid,jstr);
          printf("got filesize\n");
     // END BLOCK to get file size
     // BEGIN BLOCK to write file
     mid = env->GetMethodID(cls, "getBytesFromFile", "(Ljava/lang/String;)[B");
     if (mid == 0)
          printf("Can't find ByteMe.getBytesFromFile\n");
          goto destroy;
     else
          jbyteArray ret =(jbyteArray) env->CallObjectMethod(obj_print,mid,jstr);
          // Access the bytes:
          jbyte *retdata = env->GetByteArrayElements(ret, NULL);
          // write the file
          std::ofstream out("data.bmp", std::ios::binary);
          //out.write ((const char *)retdata, 921654);
          out.write ((const char *)retdata, (long)filesize);
     // END BLOCK to write file
     destroy:
         if (env->ExceptionOccurred())
            env->ExceptionDescribe();
    jvm->DestroyJavaVM();
}(end ByteMe.cpp)

Where can I find a macro I can use in Project Properties to generate PDB files of different filenames each build?

Found a better solution. The answer is given at the very bottom of this post.
I'm looking for $(Random), %(Date), %(Time), or some %(Value) that I can put in the "Generate Program Database File" entry.
Like "$(TargetDir)_%(CreateTime).pdb".
But the problem is, %(CreateTime), %(ModifiedTime), and %(AccessTime) has colons in them, making them useless when putting them into the filenames.
What other ways can I generate PDB files of different file names? Or, how do you modify %(CreateTime) so that I can remove the colons and just obtain the numeric values?

Hi Tom_mail78101,
It seems that there is no built-in macro for renaming the PDB files randomly.
You could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio
The Visual Studio product team is listening to user voice there. You can send your ideas/suggestions there and people can vote.
I agree with Viorel. The possible way to rename the PDB files is that you write your own script to rename the PDB file after building the project and put the script to Post-Build event in Build Event. As for whether this way can accomplish it, you can try
to consult on: MSBuild
forum like this thread: https://social.msdn.microsoft.com/Forums/vstudio/en-US/bcf39fd6-0e0c-4486-9438-7a724ded44de/postbuild-event-command?forum=msbuild
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I bought and installed many fonts for a project and one font in particular which is showing up in the font list on a new file, is missing when I open an existing file containing that font. I can't understand why that's happening and the font is Centrale S

Hi
I am encountering a missing font error on Adobe Illustrator for a font that I recently bought - Centrale Sans Bold. This font is clearly installed in the system's font folder and is also showing in the font list on Adobe Illustrator. But when I open an existing file containing this font it is giving the error "The document uses fonts or characters which are not available or are in a different format than originally specified".
We have also bought Centrale Sans regular from a different website as we couldn't find both on one, could that be clashing somehow?
Also the existing file was created on MAC plattform and we are using a windows plattform to open it. That to me doesn't seem like an issue as all other files are opening up fine and I have bought around 47 fonts and only this font seems to be not working. I have also written to the website I bought it from but I have also bought around 20-25 fonts from them and all the other fonts are working fine too. Maybe its an illustrator related problem?
Please help!!!!!!

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

How can i compare two excel files with different no. of records.

Hi
I am on to a small project that involves us to compare two excel files. i am able to do it but am struck up at a point. When i compare 2 different .csv files with different no. of lines i am only able to compare upto a point till when the number of lines is same in both the files.
Eg. if source file has 8 lines and target file has 12 lines. The difference is displayed only till 8 lines and the remaining 4 lines in source lines are not shown.
Can you help me in displaying those extra 4 lines in source file. I am attaching my code snippet below..
while (((strLine = br.readLine()) != null) && ((strLine1 = br1.readLine())) != null)
                 String delims = "[;,\t,,,|]";
                String[] tokens = strLine.split(delims);
                String[] tokens1 = strLine1.split(delims);
               if (tokens.length > tokens1.length)
                for (int i = 0; i < tokens.length; i++) {
                    try {
                        if (!tokens.equals(tokens1[i])) {
System.out.println(tokens[i] + "<----->" + tokens1[i]);
out.write(sno + " \t" + lineNo1 + " \t\t" + tokens[i] + "\t\t\t\t" + tokens1[i]);
out.println();
sno++;
} catch (Exception exception)
out.write(sno + " \t" + lineNo1 + " \t\t" + tokens[i] + "\t\t\t\t" + "");
out.println();
Thanks & Regards

A CSV file is not an Excel file.
But apart from that your logic makes no sense.
If the 2 files are of different sizes the files are different by definition, so further comparison isn't needed, you're done.
If you want to compare individual records, you need to compare all records from one file with all records from the other, unless the order of records is important in which case your current system might work.
That system however is overly complicated for comparing CSV files.
As you assume a single record per line, and if one can assume those records to have identical layout (so no leading or trailing whitespace in or between columns in one file that's not in the other) comparing records is simply a matter of comparing the entire lines.

Error while relocating (Can't write file (no space)) - Help please

I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
Hoping for a solution!
Message was edited by: thomas80205

It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.

WARNING: Cannot "Read or Write" files on iPod

My iPod has been behaving very curiosly as of late. For the past month a wanring has flashed up on my iTunes screen when attempting to sync music files. The warning says *"Cannot read the disk 'iPod'. Unable to read or write files"*. Despite this warning my iPod has been able to update daily podcasts without issue. However, when I recently purchased new music I could not get it to sync to my iPod. I have no problem listening to this new album in my iTunes library, but it just will not sync to my iPod. I created a playlist for it and attempted to add it, but I discovered that the iPod was not syncing the playlists either!
In a recent attempt to remedy the problem I selected only to sync the playlist that had the new album. What happened was frightening. All my music was no longer on the iPod, with the exception of my podcasts! I tried altering the settings to return all the music, but now I am unable to add any of my music from the library.
I am wondering if anyone has experienced this difficulty before, and if so, if they have any trouble shooting techniques. I have already been ti Apple's support page and completed the 5 recommended steps, to no avail. Any suggestions or thoughts as to what might be occuring.

Luckily, backing up your itunes library is easy. Just duplicate the folder(s) with your music in it. (Most likely, it's user/Music/ITunes.) Once the copy is made, you might want to move it to a different part of your hard drive.
Now, restoring your ipod WILL wipe the device. If there's anything on your ipod that isn't in your itunes library (unlikely but possible), you want to make sure you've got a copy of it somewhere before restoring.
Before restoring, check to see if there is an update to the ipod's firmware that needs to be installed. This is a "longshot" but might help. Just click the "check for update" button on the ipod's "Summary" pane in itunes. (Current version is 1.2.3, I think).

Write file in different fonts

Similar Messages

Maybe you are looking for