Writing direction in select options

I want to change the writing direction of a select options from right to left TO Left to right.
here in the image, in Inspection lot no., direction is from right to left.
i want to change it to left to right.

Hi Arun,
ok. So what would you suggest? What kind of behavior is the selection-screen showing and can we achieve the same as quered by Ajay?
Cheers,
Varun

Similar Messages

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

Require select-option functionality in Module Pool Programming

Hi Gurus,
I am doing a development by Module Pool on Warehouse Management. For that development user require select-option on
screen for entering multiple storage type.
My first question : Is any thing available for directly implement select-option by module pool ?
My Second Question : I have use two text boxes for range and one button for multiple selection and arrange on screen like select-option. then on PAI of that button I call COMPLEX_SELECTIONS_DIALOG FM. Now it is working fine. Now I put some value in it. when I save the values and exit , I want the icon of the button must change from icon_enter_more to icon_display_more. I write the below code for that in PBO of the screen:
       if rtab[] is initial.   "RTAB[] is a table for holding values what inputted in popup of multiple selection.
          write icon_enter_more as icon to button. " BUTTON is screen field and it taken as a type C length 4 on TOP module as .
      else.                                                               " BUTTON taken on screen as push button.
          write icon_display_more as icon to button.
      endif.
but the icon is not changing dynamically.
If I use ICON_CREATE then one short dump happen describing OUTPUTLEN_TOO_SMALL.
Can anybody please give me the solution.

IN PBO SECTION.
module STATUS_0001 output.
SET PF-STATUS 'ZINVGUI'.
SET TITLEBAR 'ZIN'.
if rbtn1 = 'X'.
   loop at screen.
     if screen-group1 = 'GR2'.
     screen-input = 0.
     modify screen.
     endif.
   endloop.
else.
   loop at screen.
     if screen-group1 = 'GR1'.
     screen-input = 0.
     modify screen.
     endif.
   endloop.
endif.
IF RTAB[] IS INITIAL.
   WRITE icon_enter_more AS ICON TO GTTYP.
else.
   WRITE icon_display_more AS ICON TO GTTYP.
endif.
endmodule.
IN PAI
form GET_STORAGE_TYPE .
TAB_FIELD-FIELDNAME = 'LGTYP'.
TAB_FIELD-TABLENAME = 'LQUA'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
   EXPORTING
     TITLE                   = ' '
     TEXT                    = 'Storage Types'
    SIGNED                  = 'X'
    LOWER_CASE              = ' '
    NO_INTERVAL_CHECK       = ' '
    JUST_DISPLAY            = ' '
    JUST_INCL               = ' '
    EXCLUDED_OPTIONS        =
    DESCRIPTION             =
    HELP_FIELD              =
    SEARCH_HELP             =
     TAB_AND_FIELD           = TAB_FIELD
    TABLES
      range                   = RTAB
   EXCEPTIONS
     NO_RANGE_TAB            = 1
     CANCELLED               = 2
     INTERNAL_ERROR          = 3
     INVALID_FIELDNAME       = 4
     OTHERS                  = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA:LAST TYPE SY-TABIX.
DESCRIBE TABLE RTAB LINES LAST.
IF NOT rTAB[] IS INITIAL.
         Read the very first entry of the range table and pass it to
         dynpro screen field
           READ TABLE rTAB INDEX 1.
           IF sy-subrc = 0.
              P_LGTYP1 = rTAB-low.
           ENDIF.
           READ TABLE RTAB INDEX LAST.
           IF sy-subrc = 0.
              P_LGTYP1U = rTAB-LOW.
           ENDIF.
ELSE.
rTAB-low = p_lgtyp1.
append rtab.
rTAB-low = p_lgtyp1u.
append rtab.
ENDIF.
endform.
IN TOP INCLUDE.
DATA : GTTYP TYPE C length 4.

Performance issue when a Direct I/O option is selected

Hello Experts,
One of my customers has a performance issue when a Direct I/O option is selected. Reports that there was increase in memory usage when Direct I/O storage option is selected when compared to Buffered I/O option.
There are two applications on the server of type BSO. When using Buffered I/O, experienced a high level of Read and Write I/O's. Using Direct I/O reduces the Read and Write I/O's, but dramatically increases memory usage.
Other Information -
a) Environment Details
HSS - 9.3.1.0.45, AAS - 9.3.1.0.0.135, Essbase - 9.3.1.2.00 (64-bit)
OS: Microsoft Windows x64 (64-bit) 2003 R2
b) What is the memory usage when Buffered I/O and Direct I/O is used? How about running calculations, database restructures, and database queries? Do these processes take much time for execution?
Application 1: Buffered 700MB, Direct 5GB
Application 2: Buffered 600MB to 1.5GB, Direct 2GB
Calculation times may increase from 15 minutes to 4 hours. Same with restructure.
c) What is the current Database Data cache; Data file cache and Index cache values?
Application 1: Buffered (Index 80MB, Data 400MB), Direct (Index 120MB; Data File 4GB, Data 480MB).
Application 2: Buffered (Index 100MB, Data 300MB), Direct (Index 700MB, Data File 1.5GB, Data 300MB)
d) What is the total size of the ess0000x.pag files and ess0000x.ind files?
Application 1: Page File 20GB, Index 1.7GB.
Application 2: Page 3GB, index 700MB.
Any suggestions on how to improve the performance when Direct I/O is selected? Any performance documents relating to above scenario would be of great help.
Thanks in advance.
Regards,
Sudhir

Sudhir,
Do you work at a help desk or are you a consultant? you ask such a varied range of questions I think the former. If you do work at a help desk, don't you have a next level support that could help you? If you are a consultant, I suggest getting together with another consultant that actually knows more. You might also want to close some of your questions,. You have 24 open and perhaps give points to those that helped you.

Why does Mail crash when I change the writing direction selection to Right to Left?

Every time I select Hebrew or Arabic text I am currently typing in order to change its writing direction (in order to get the cursor to appear to the left side of the sentence) to Right to Left, Mail crashes. This is obviously a bug in the program, and seriously needs to be fixed ASAP. I have no problem changing the alignment to the right side, but changing the cursor position causes the crash. Has anyone been able to solve this in the meantime?

I have not seen anyone else reporting this problem since 10.8 was released last July, and I cannot duplicate it myself. So it is more likely some issue with your setup than a bug, but further testing is needed to be sure one way or the other.
Could you provide more info on exactly what you are doing when this occurs? Are you typing mixed English/Arabic text? Are you using the Format menu to switch direction or a keyboard shortcut? Are you trying to use Arabic fonts not provided with OS X? A screen shot of what it looks like just before you crash would be helpful (use the camera icon here to upload that).

Just loaded iphoto on my ipad to make a calendar. Directions are select photos and select calendar from toolbar. No toolbar and no calendar option. Help

JUst loaded iphoto on my ipad to make a calendar. Direction are select photos and hit calendar icon on toolbar at the bottom. There is no toolbar at the bottom and nowhere is there a calendar icon. Please help.

What version of iPad do you have? (iPhoto doesn't work with iPad v1.)

Fill a "select options" from a direct input.

Hi there
my new need is this, into a report I call a transaction (FMMC) and I'd like to fill a multiple selection into a select option (belnr) , there is a way to do only an execution of this "batch" or I have to launch the transaction for every document I have to release ?
Thanks

See the sample code
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
                with p_param2 = 'value'.
http://www.sapdevelopment.co.uk/reporting/rep_submit.htm

Specific default values for select-options high and low

Hi
My requirement is in the selection screen i have a select-options field for which i need to give default values as mentioned below.
Description Data Type Default Value Mandatory? Sel Scrn Type
Delivery/BOL Date ekab-bedat 1st DOM to current day Y Range
The datatype is ekab-bedat.
In the low value field ,it should be 1st Date of month(DOM) and in the high value field it should be current day.
Give me the code for the same asap.

>
sreedeep.sreekumar wrote:
> Dont mistake my intensions. When i tried to write it in the form of a request it showed me that it cannot me posted beacuse the words that i am using (please,kindly) is not following the terms and conditions of the words to be written in the threads
Sounds quite vague to me.
>
sreedeep.sreekumar wrote:
> I was asking help for this as i am a novice in SAP-ABAP and i couldnt find solutions for it and also i have seen people directly writing codes for the queries.
Becuase you see people posting pieces of code doesn't mean you can ask for a solution asap. Besides, whether you're new or a veteran in ABAP, what you need can be solved with some very basic knowlegde of ABAP. Just use a bit of common sense.

Select-options in SELECT query - syntax error

Hi all,
I get the error below when I try to use the select options in a SELECT query . Please help me.
"The IN operator with "SO_AWART" is followed neither by an internal
table nor by a value list."
The code i have used(Logical database PNP is used):
TABLES: pernr,
        catsdb.
INCLUDE ztime_cwtr_top.    " global Data
INCLUDE ztime_cwtr_f01.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
PARAMETERS P_THRES TYPE I.
SELECTION-SCREEN END OF BLOCK B1.
Get data from CATSDB table. Workdates within the date interval are considered.
SELECT pernr workdate awart catsquantity beguz enduz status
FROM catsdb
INTO TABLE it_catsdb
WHERE pernr = pernr-pernr    AND
       workdate GE pn-begda     AND
       workdate LE pn-endda     AND
       status   IN ('20', '30') AND
       awart    IN so_awart .
      awart    IN ('1100', '1137', '1138', '1139', '1140',
                  '1147', '1148', '1149', '1157', '2003' ).
when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
I have tried different options like using only the select-options in the where condition.
Thanks in advance.....
Madhu

Solved.
Code with syntax error:
include z...top .
include z...fo1.
select-options: xxxxxxx
Code with no syntax error:
select-options: xxxxxxx
include z...top .
include z...fo1.
Thanks for all your help,
Madhu

Select-options - select multiple values from personal value list

Hi experts,
In my application, I am using select-options. I select the values required from the search help into the personal value list . I want to copy these values from the personal value list into my ranges table. Do I have to copy them one row at a time. Is there any way to select the values directly into the ranges table of the select-options field?
Regards,
Abdullah.

Boy, this is something we're struggling with too. So we'd like to hear others' ideas on this also.
thank you,
iggy

Select options for the pnp logical database.

Hi ,
We get a default selection screen when we use logical database in HR ABAP.
But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
How can we change it to select options ....
I tried all the options in HR- Report categories but it is not working..
Kindly Help..
Regards,
Ashwin.

>
ASHWIN JOHARI wrote:
> Hi ,
> But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
> Ashwin.
Which fields? Almost all of them are defined SELECT-OPTIONS.. you dont' see the range option directly.. click on he options icon & you can enter the ranges.
~Suresh

Select Options, Report Painter

How can I create "Select Options" for a variable in the "General Data Selection" of the report painter screen.
Thank You.

If you specify selection parameters for several years and periods in a
    Report Writer or Report Painter report, the characteristics year and
    period are taken into account independent of each other.
    A report with the selections:
           From-year   :    1997
           To-year     :    1999
           From-period :     003
           To-period   :     008
    will hence select all the following data:
            003/1997 .. 008/1997, 003/1998 .. 008/1998, 003/1999 .. 008/1999
     This is the standard behavior of Report Writer and Report Painter
     reports.
     However, reports which directly display the data for the period
            003/1997 ............................................. 008/1999
     are required in some cases.
     You can achieve this in the report definition using the following
     procedure.
     Additional key words
     several years several periods GS274
     rolling periods, rolling
           SUPPORTGUIDE 20010330131459
     REPORTWRITER, SGRW_DOCU_CONS_NOTE,
     SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
     Cause and prerequisites
     This is a standard behavior of the Report Writer.
     Solution
     A procedure is described below to implement the selection over a period
     of several years and periods. This is merely an example which should
     serve as a support for experienced users of the Report Painter and
     Report Writer when defining their own reports.
     1. Definition of auxiliary column 1: 'All-periods'
         Period:   0 ... 17
         Year:      From-year .. To-year
         000/1997.....................................................017/1999
         Definition of auxiliary column 2: 'Periods before'
         Period:   0 ... From-period - 1
         Year:      From-year
         000/1997..002/1997
         Definition of auxiliary column 3: 'Periods after'
         Period:    To-period + 1 .. 17
         Year:      To-year
         009/1999..017/1999
         Definition of the formula column:
         Formula = 'All-periods' - 'Periods before' - 'Periods after'
         000/1997.....................................................017/199
         9
         000/1997..002/1997
         009/1999..017/1999
                            003/1997............... 008/1999
         Hide the three auxiliary columns. The formula column now correctly
         shows the required period
                            003/1997............... 008/1999
Note:The new reporting table RWCOOM is also available as of Release 4.0
for reports which were, up to now, defined in table CCSS. RWCOOM
contains the characteristic FISCPER which represents a combination of
year and period. You can directly define reports over several years and
periods using characteristic FISCPER without having to follow the
procedure described above.
Please take into account that you cannot call reports via report
Interfaces in the formula columns (see Note 98187).
If you have any query, you may reach me
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited,
Hyderabad. AP. India
Phone : +91 9848550024
Email : [email protected]

F4 help for date in select options..

Hi Gurus,
I want a search help for date field which belongs to select options.
I know if it is a parameter we directly map the attribute value to that data element.
Can some help me with this..
Best Regards,
Navin Fernandes.

Hi Gurus,
The select options works for date.. I got the solution.
It directly relates to the default data dcitionary help.
Got it from this example: WDR_TEST_SELECT_OPTIONS
Best Regards,
Navin Fernandes.

Select options for multiple entries

hi,
in selection screen i have 2 select-options as below
SELECT-OPTIONS: s_belnr FOR bkpf-belnr ,
                              s_bukrs FOR bkpf-bukrs.
the problem is if BELNR or BUKRS are not given the error message should be displayed as enter the required fields.
if i keep the OBLIGATORY i will get the message but if i keep OBLIGATORY first they need to enter one belnr or bukrs in selection screen then it allows for multiple option but the bussiness want to directly goto multiple option and upload data.
please help

Note Replace P with % Sign in IF Condition it not allow me to Put % there
TABLES: bkpf.
SELECT-OPTIONS: s_belnr FOR bkpf-belnr,
                s_bukrs FOR bkpf-bukrs.
AT SELECTION-SCREEN.
IF s_belnr[] IS INITIAL AND s_bukrs[] IS INITIAL AND sy-ucomm NE 'P000' AND sy-ucomm NE 'P001'.
    IF s_belnr[] IS INITIAL OR s_bukrs IS INITIAL.
      MESSAGE: 'Please Enter Value in Bothe Fields' TYPE 'E'.
    ENDIF.
ENDIF.

ABAP list report, multiple selections - select-options

I have written a very simple ABAP list report, that contains a single select-option. On the selection screen, I have the option of entering multiple values, with each new value being displayed directly underneath the old, but I am only getting the first value entered on the screen displayed. Does anyone have any sample code for me?

Hi Daniel,
Select_Options consists of 4 parameters, in with the range consists in eg...
Select-options s_vbeln for vbak-vbeln.
then s_vbeln-low, s_vbeln-high are the range values...
So whne you write select query.
write vbeln in s_vbeln
instead of vbeln eq s_vbeln
Hope this solves your problem.
Thanks & Regards,
Dileep .C

Writing direction in select options

Similar Messages

Maybe you are looking for