Wrong comments In journal template
Hi.
I have created a journal template, the functionalitiy works fine.
I have a situation where I have entities and accounts where some have the same id's.
When you select an entity and account from the current view, it shows the comment as the description of the account or entity.
What I realised is that if I select the account and entity with the same id, then the entity shows the description of the account being selected.
Is there a way in which we can correct this, without changing the id's?
Thaks in advance
Hi,
You should think about the possibility of changing the id's which have the same names throughout all your dimensions.
In fact, it's not recommended to use same id's, and could bring to some problems like the one you're encountering.
Moreover, you can just notice that, when building an EVDRE form scratch and choosing the same id for Entity and Account dimension (for example), this will automatically display Entity:yourID and Account:yourID in the control panel. You can operate the test. But in any case, you should change all your ID's to be unique throughout all your dimensions.
In order to perform that, and not to loose any data, you should use the NEWID column in your excel dimension sheet.
Hope this will help you.
Kind Regards,
Patrick
Similar Messages
-
Can I insert comments into RTF Templates?
I'm using Oracle XML Publisher Template Builder for Word, Version 5.6 Build 45.
The RTF template I'm working on has grown to be quite complex, and I would like to include some documentation on the template, so that other people who might pick up the work after me know what was happening.
Is there any way to insert comments into the template, in the same way as is possible for e.g. in SQL? I tried to insert a Word Comment, but that generates errors.
I suppose the alternative is to document logic decisions etc. in a separate document.
ThanksHi,
You can use the following xsl tag
<xsl:comment>This is a comment!</xsl:comment>
Sandesh -
Can't open 1 document created using travel journal template
Since installing Snow Leopard yesterday I found out I can't open this one file I created using the travel journal template. All other Pages '09 files are fine. I just get this error message telling me Pages had to close my document "unexpectedly".
*"Pages quit unexpectedly while using the SFWordProcessing plug-in"*
Don't see why it would need to use this plug-in. And I don't recall choosing this plug-in. There must be a way around this. To open this file by turning off that plug-in perhaps. Unless it's absolutely necessary when using the templates. Or the "travel journal" template.http://discussions.apple.com/thread.jspa?threadID=2141021&tstart=15
-
Error while creating Journal Template
Dear Experts
I am in process of re-creating Journal Template and got below error
(I have upgraded to BPC 7 NE SP8 - before this I was using the Journal!!!!)
Step1_Init : An error occured while parsing EntityName, Line 1, Position 2069
and then Journal Wizard wont display any dimensions to select the header dimensions
Any suggestions
AmarHi Shankar,
we have the same issue, but we are running on BPC NW 7.5 SP 06.
Did you find a solution?
Best regards
Gianfranco Vallese -
Error while loading journal template in fdm 11.1.1.2
Hi Guys,
I am using Fdm 11.1.1.2. I am getting the following error while loading a journal template
The following error I am getting while loading the template while using the option Select file from inbox
Error- The remote server machine does not exist or is unavailable
The following error I am getting while loading the template using the option upload file
Error- file upload attempt failed.
Detail- access to the path c:\hyperion\products\financial data quality\web server components\website\temporary export files\admin******.temp is denied
An early response is highly appreciated
Thanks & Regards
pssHi,
Did you drop it as ADF table? Can you post the code snippet of your jspx page?
-Arun -
Error message when we try to save a journal template / table
Could anybody help us?
Attached you find the error message , when we tried to save a journal template:
We're using BPC Microsoft Version 7.5.104
#ERROR#AdminJournal##EPM-BPC-MS##2fe9a7f1-484d-429f-9a1b-7f155d5ea8a8###clsExcelHandler::SetExcelHeader#CDI
Administrator########Plain##[LOG ID:13]System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'Excel.Range'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00020846-0000-0000-C000-000000000046}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
at Excel.ApplicationClass.get_ActiveCell()Check and make sure that you can visit http:[server]/reports, for the reporting server. Does that work? If yes, I would make sure your DB has the APPSET_EXTRA database in addition to the APPSET in SQL DB. Also, when you process the Applications, via MOdify (full process), does it fail on step 8?
I have seen this before and it seems to be related to getting the structure correct for the Reports and reporting services. Hope this helps. -
Something went wrong while downloading your template
We have Office 2013 installed on Windows 7 Enterprise 64 Bit. When trying to download templates from Word, we get the message Something went wrong while downloading your template.
We have confirmed it's not the firewall blocking the download. We have also tried repairing the install of Office 2013.
Any assistance would be greatly appreciated.
KeithHello,
Which build version of Office 2013 are you using? Please make sure your Office 2013 is fully patched. You can try installing Office 2013 SP1 to check if it helps:
http://support.microsoft.com/kb/2817430
In addition, please try downloading templates from the link below and check if you will get any error message:
http://office.microsoft.com/en-us/templates/
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support -
is it possible to fix some default dimension members in journal template..for example the value datasrc allways have to be JOURNAL..
Also is it possible to rearrage the Journal Template looks for example Jounral ID and Group are coming to the lowerpart of the header ...can it be shifted to the upper part so that FIXED header dimension can come as last portion of Header Journal Template..
Appreicate inputs...Hello,
For adding a fixed value of datasrc try this....
Limits to Dimension Members for Journal Entries
You can limit the number of dimension members that are available to users during journal entry. All base-level members that the user has access to are available when the user fills out a journal template. By using the EnableJRN property for a dimension, you can limit the members available to users when they double-click member cells in the journal template.
Features
You can limit journal dimension member lists by adding the property EnableJRN to the dimension for which you want to limit journal access. Then, in its dimension sheet, type a Y in the EnableJRN column of base-level members for which you want to allow users to post journal entries. Repeat this for each dimension you want to limit, and process the dimensions.
Also, I know of at least one project that had success with changing the journal template heavily for formatting. I did not test you exact changes but suspect this will be ok. Please note you will have to recreate the template which means historical journal entries are lost (SAP is chaning this in the future)
Hope this helps.
Cheers,
Chris -
Header dimension in Journal template
I have created a journal template, and notice that the Header dimension information is not displayed in the template, Only the detail input area is display. Anybody can help with this?
this is weird. What SP are you working on? There are a lot of issues with journals. for example saving and posting of journals does not work in SP 5 ...
D -
Web ADI GL Journal Template - Journal Line Number
Is anyone know if you can add the journal line number to a web adi journal template.
Our users create journals in a spreadsheet and upload in to Oracle vua web adi. They print a hard copy of the journal in Excel ADI template format as well as an output from Oracle of the journal to which their backup is attached. This is required for our audit/SOX requirements.
Our users/audit review team are frustrated that the order of the lines in the adi xls file is not the same as in the actual oracle journal.
Having looked at the journal template document I cannot find the journal line number as an option when creating the adi template. Is there any other way of ensuring that the line number in excel is the same as in Oracle (aside from re-ordering the excel lines into code combination order).
We are running on Oracle Applications : 11.5.10.2
ThanksAs per (How To Add Line Number Column To Journal Entry Webadi Template [ID 1102405.1]) this feature is not available in R12 so this implies that it is not available in 11i.
Thanks,
Hussein -
How to replace or insert a customer logo when creating a journal template?
Hi Experts,
How to replace or insert a customer logo when creating a journal template?
Thanks in advance.
Best regards,
MilaHi Dzmitry,
Thank a lot for your reply.
We have already tried to download the journal template and insert our logo. The problem is that the journal template is protected and we do not have the password.
Kind regards,
Mila -
Can't make comments editable on template child pages
Is there a way to make comments editable on template child pages. When making editable regions, comments are not included. I need to make comments editable on child pages. How do I do this.
Thank you,
JimOpen your Template.dwt file. Add an editable region around your comments section.
<!-- TemplateBeginEditable name="comments" -->
<p>Comments go inside here...</p>
<p>Comments go inside here...</p>
<!-- TemplateEndEditable -->
Save your template. Allow DW to update your child pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Hiring Someone to Create a Customized Aperture Web Journal Template
I'm interested in creating a customized Web Journal template for Aperture. Does anyone know anybody out there I could hire to do such a project?
The BEST way in my opinion is nothing mentioned in this forum:
LIGHTSCRIBE BABY!!!!!!!!
Laser burn ANY image on the DVD just like Hollywood Movies baught in a store.
I paid $175.00 for a Lacie Dual Layer DVD Burner and it included Toast Titanium 7 and LightScribe Software - Best of all works on MACs ONLY (not PeeCee's) and produces flawless DVD's regardless of Brand name.
No ink jets to buy! No paper to buy! No stupid bulky printer to have on your desk! Just a slim Stainless Steel looking DVD Burner that puts to shame Apple's own SuperDrive OR any Label or Printer kit on the market today.
www.lacie.com -
BPC "The system cannot create the journal template"
I am trying to create a Journal template in BPC but whatever I do I get the error message "The system cannot create the journal template"
I am running BPC 5.1 and have tried with service pack 1 and now with service pack 5 installed. The system is on SQL Server 2000.
Has anyone come past this problem?Hi Andy,
Please check how many sheets are in a default excel workbook on your client. If less than three, BPC fails to create the journal template. If that's the case, try setting default number of worksheets to 3, then retry journal template creation.
If the above is not the issue, then you'll have to check that reporting services is working correctly. As a first step, go to http://<app server name>/reportserver (or reportserver$<instancename> if you are using a reporting services instance and left it with the default name)
If that page compiles and shows without error, then try http://<app server name>/ reports (or reports$<instance name>) If that one also compiles/doesn't give errors, then reporting services is working. -
Authorization for creating activity journal template
I have log on with salespro role in CRM 7.0.When I try to click the link in UI for creating activity journal template.
It said that I don't have authorization.
Could I ask where to control this authorization?
I thought this should include in the authorization for salespro.
ThanksHi Jiao,
Just Check the PFCG role assigned to Salespro role is having authorization for object CRM_ACTJNL
Regards,
Dipesh.
Maybe you are looking for
-
how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks
-
Hi. I have a dvd which contain my friend's wedding movies. The problem is that everytime I played it on the DVD player, it gets stuck and said 'skipping damaged area'. But when I played on an actual player on the tv, everything's fine. Recently my fr
-
How to code on button click how to increase row height in iphone/ios/uitableview
how to code on button click how to increase row height in iphone/ios/uitableview - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath; pppp=[postText objectAtIndex:indexPath.row]; CGSize maxSize = CGS
-
Spltting an image into its red green and blue components
Hi, I need to split an image into 3 images, one the red component of the original image, one the green component, and one the blue. Any idea how this can be done?
-
Both FCPX and QuickTime do not recognize JVC Super VHS ET Professional player
I have what you've read above and it does not seem to be working with either QuickTime or FCPX capture settings. I plug everything in, firewire cable and all, go to the import from camera setting in FCPX where it welcomes me to the "No device detecte