Wrong Digital Signature

Hi,
I have SAP B1 2004 & I developed the addon using VS 2005.While tries to attach the addon in Addon administration it gives me wrong digital signature. The addon was successfully installed in SAP B12005 But it gives me error in SAP B12004.Plz Assist me its urgent. I have tried to created Setup & ard file using both B1DE2003 & B1DE2005. But the error was same......
-Manmath

Hi Manmath,
Every time you recompile your addon code or the installer exe you need to reopen the AddOnRegDataGen application and regenerate the file again (you can open your old one and only press regenerate after).
You can use B1DE installation wizards, they can create for you the complete installer project + a .bat you only have to rerun to regenerate the new ard file everytime you need it.
Hope it helps
Trinidad.

Similar Messages

Wrong digital signature for add-on installer

I have created a addon and it gives error as,
Wrong digital signature for add-on installer
When I tried installing this addon on another SAP server,it worked.On the problamatic server,the antivirus has expired.Is virus capable to creating this problem ? I have tried all the options for solving the problem such as,
1.Delete the temporary files.
2.Delete the SBO files.
3.Create a new addon and release it.
4.Create a new addon with different name.

Hi Dilip,
Refer This...........
Link: [url] Wrong Executable Digital Signature for Add-on
Link: [url] SAP Business One AddOn Installer
Link: [url] Wrong digital signature for add-on installer
Link: [url] Wrong Digital Signature...
Thanks
Shafi
Edited by: shafi_sunshine on Aug 18, 2011 7:21 AM

Wrong digital signature for Add-on

I have just upgraded to 2004 (patch 5). My Add-on is installed (finally) and is successfully loading (finally)when SAP B1 is launched. Whenever I re-compile my Add-on for development and replace my Add-on exe I get the error "Wrong digital signature for Add-on" when SAP goes to load the Add-on again.
I cannot successfully create my .ard file without a digital signature for the Add-on .exe (even though the documentation says it is optional).
How can I test my Add-on in development mode if I have to re-create the .ard file and re-install the Add-on everytime I re-compile?? This does not seem correct.
Please advise. Thanks.

I found a solution to this problem.
We were not debugging in development mode properly.

Wrong Digital Signature for Add-on - After Install - When Start Add - on

Hi there,
I have created Addon Installer with the B1DE Installer Setup. After that also use batch file AddOnRegDataGen.bat to Generate Ard File.
After I addon install successfully, BUT when I want to Start it , It Prompts message
"Wrong Digital Signature for Add-on."
I do not know more what to make, already I read all the answers of the SDN and I did not solve the problem.
I am losing the hopes. Please Help!
Thanks a lot!

Hi
Try editing the AddOnRegDataGen.bat and changing the version number to corellate to the setup executable you have created and then execute the batch file to recreate a new ard file.
Regards
John

Error : "Wrong Digital Signature for Addon Installer"

I'm having some problems at the time of installing any kind of addon in sap B1
Everytime I'm having an error -
"Wrong Digital Signature for Addon Installer"
even when I'm adding SCREEN PAINTER

Hi
This error could be cause by a versioning or corrupted installation:
1. For the version please check if you have another add-on installed with the same version like 2.1.2 (try to change it add-on file and try again)
You can also try to change the add-on installation order (in case of you have another add-ons installed).
2. If checking the version does not help please check those notes on How to clean client after corrupt installation of addon and also Re-registering the UI.
808354 UI Server is not loaded with SAP Business One client
819501 How to clean client after corrupt installation of addon
Paulo Calado
SAP Business One Forums Team

Wrong Digital Signature while installing ADDons

Wrong Digital Signature while installing ADDons

Hi,
Please add the command line arguments in the command line parameters and access this parameters while connecting to the SBO application. and then build the setup for add on.
        '// Use an SboGuiApi object to establish connection
        '// with the SAP Business One application and return an
        '// initialized application object
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        bModal = False
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        '// by following the steps specified above, the following
        '// statement should be sufficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        '// connect to a running SBO Application
        SboGuiApi.Connect(sConnectionString)
        '// get an initialized application object
        oSBOApplication = SboGuiApi.GetApplication()
Regards,
Noor

XL Reporter Wrong executable digital signature error on one workstation

Hi,
Im getting this error on 1 of our client's worstations.
They have SAPB1 2005A.
XL reporter works on all other workstations except for one.
Any suggestions?
Thanks!

Hai!
Check these threads
Re: Wrong digital signature for add-on installer
error : "Wrong Digital Signature for Addon Installer"
Error:Wrong Executable Digital Signature for Add on.
Register Add-on

JSObject returns wrong date. How can I extract correct date from digital signature?

I'm trying to extract name and date from digital signatures by using JSObject in Excel VBA, but JSObject returns wrong date. Year, month, hour and minute are correct, but only day is incorrect.
Here is my code. I'm using Acrobat 8.1.3.
Please tell me what's wrong with this code and how I can extract correct date from digital signatures.
Public Sub sbTest()
Dim oApp As Acrobat.acroApp
Dim oPDDoc As Acrobat.AcroPDDoc
Dim jso As Object
Dim f As Object
Dim sig As Object
Dim strFileName As String
Set oApp = CreateObject("AcroExch.App")
Set oPDDoc = CreateObject("AcroExch.PDDoc")
strFileName = "C:\Test.pdf"
If (oPDDoc.Open(strFileName)) Then
Set jso = oPDDoc.GetJSObject
Set f = jso.getField("Signature1.0")
Set sig = f.signatureInfo()
Debug.Print sig.Name
Debug.Print sig.Date
End If
Call oPDDoc.Close
Call oApp.Exit
End Sub

Hi
You can use TDMS file format to save the data. I have attached a reference Vi.
On button click you can log the data or remove the case structure and continuous log the complete acquisition data.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Data Save in File.vi ‏35 KB

Add-on blank agrement wrong executable digital signature for add-on

hai,
when we trying to install the sample add-on called balnked agrement in sdk
help file we are getting the follwing error.
add-on blank agrement wrong executable digital signature for add-on.
how do recftify this error.
thanking
nagababu

Nagababu,
I have seen this error when either the .ard file is corrupt or the license file is corrupt. You may want to try getting a new license key from SAP and/or create a new .ard file.
Eddy

Add on XL reporter : Wrong executable digital signature for Add on

Hi Experts,
I have a client who gets this error 'Add on XL reporter : Wrong executable digital signature for Add on' when they try to login. They are on 2007A PL45. This happens on the server as well as on clients. Uninstalll and reinstall of client didn't work. We had a look at the AddonLocalRegistration folder to see if XL reporter is registered but can't see any.
I have found a similar link in the forum but that says about 2005b.
Any help will be appreciated.
regards
Johnson

Sir,
Please do the following steps :
1. Please go to the SBO-COMMON database, find table SARI, you will get
the data entry for your Addon. Please check the value of field
"AddOnChk". This is the digital signature of Addon executable file.
2. Then go to installer package of the Addon, open the ard file
(XLReporter.ard) with notepad then check the value of "addonsig".
3. Compare these two values, if they are different, please overwrite
"AddOnChk" field in database with the value of "addonsig" in ard file.
and then try to start the addon again.
4. If there are the same, the ard file or the executable file has been
corrupted. I would like to suggest you remove the installer package
from your machine, and download a fresh installer of Addon from SAP
Service Marketplace. After that, please follow the steps as per the
attached note ( Note no. 819501 ) to make your machine clean and
then install the addon again.
Regards,
AVTAR SINGH

Hi all, Wrong Executable Digital Signature for Add-on

hi all,
i m getting error when installing my addon.
"Wrong Executable Digital Signature for Add-on "
i remove path from "AddOnsLocalRegistration". and also remove folder from path
"C:\Program Files (x86)\SAP\SAP Business One\AddOns" and also clean %temp% folder
but i still getting same problem.
Regards
Rajkumar G

Hi,
Did u try recreating the add on, may be there was some problem when creating the ARD. If that also dosent work then try the following.. In the following path C:\Program Files\SAP\SAP Business One u will find the file AddOnsInstall.sbo now open this file with notepad and then remove the entries for ur add on.
Hope it helps,
Vasu Natari.

Wrong Executable Digital Signature for Add-on

Hi All
I have created Addon Installer with the B1DE Installer Setup. After that also use batch file AddOnRegDataGen.bat to Generate Ard File.
After I addon install successfully, BUT when I want to Start it , It Prompts message
"Wrong Executable Digital Signature for Add-on."
i am using SAP b1 2007 and BIDE 1.5.
I have already read all the answers of the SDN and but i my problem didnt solve
I am losing the hopes. Please Help!
Thanks
Rupinder

Hi Rupinder ,
Pls don't loose hope.
This is the problem of exe, Actaullt while creating ADDon two files are created,
one is ard and other is exe,
take care about the version of Addon .,Generate all the keys again and see whether the old version of addon is ther or not if there pls remove that carefully .and create the addon again .
Rgds,
Anshu
Edited by: anshu srivastava on Feb 17, 2009 12:12 PM

Hi Experts/Friends wrong executable digital signature for Add-on

i create add on when i start addon from addon manager error
msg raise "wrong executable digital signature for Add-on"
Awaiting soon Reply
raj

Hi Raj,
in Which method you created ARD..through B1DE or AddonRegdatagen..
1) it may show error due to wrong .exe file selection while creating the .ard file.
2)Delete your older versions completely and try again..it will happen due to mismatch of versions also..
Delete the folder SM_OBS_DLL(close sap and do) in your %temp% directory
and try again..
3)check you are using right version of B1DE ....
Regards,
Ganesh K

Error:Wrong Executable Digital Signature for Add on.

Hi,
We we are starting ALL Add on's we are Getting Error; Wrong Executable Digital Signature for Add on . Before Also we got Same Error After that We Uninstall All Add -ons and Freshly we Installed from Partner Portal and Installed. after That Alll Add os it's working OK there is no Error yesterday.but today i login my server it's shwoing Same Error; Wrong Executable Digital Signature for Add on.
I Checked Digital Signature AddOnChk in SARI Table Under SBO and adddonsig Under Under .ard file in Installer Package. Both are Same. How we Can Solve this issues Please Advise.
AA_Application runs without Mandatory AddOn
SAP Note:925984
See this Link for Wrong executable digital signature for Add-on[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000925984|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000925984]
Symptom
After changing a Mandatory AddOn's executable, without updating the ard file, the error message "Wrong executable digital signature for Add-on" is generated. However the application continues to work normally.
Other terms
AddOn, SAP Business One, Mandatory, continues, ard, Wrong executable digital signature for Add-on
Reason and Prerequisites
Bug
Solution
This issue will be fixed in a 2005A SP1 patch, please refer to the info.txt file on the Service market Place to confirm if the fix was included.
Can any one Guide me on this Note ? How we can solve this issues.
Regds,
Samapth Kuamr Devunuri.
Edited by: sampathdevunuri kumar on Nov 8, 2008 6:15 AM
Edited by: sampathdevunuri kumar on Nov 8, 2008 6:18 AM

Hi,
The runtime error can be caused by a corrupt installation.
I am attaching 2 notes for you to go through.
How to clean client after corrupt installation of add-on and also Re-registering the UI.
[808354|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=000808354] UI Server is not loaded with SAP Business One client
[819501|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=000819501] How to clean client after corrupt installation of add-on
Please follow the steps in [819501|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=000819501] to make your machine clean and then install the add-ons again.
If you are still experiencing problems please try the following:
- Backup the SBO Common
- Re-run Upgrader Common from patch
Result is a new SBO common with a new SARI.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

How do I remove a digital signature from Adobe Acrobat Pro. I have set it up wrongly.

I created a digital signature but I wanted to change the signature and it also was not password protected. So I deleted the signature but cannot delete the certificate to set it up again.
Mac OS X (Operating System)
So I am unable to delete the digital signature in Acrobat Xi pro.
I did the following: Adobe | Preferences | Signatures | Creation and Appearance Preferences and deleted the signature. But Adobe | Preferences | Signatures | Digittal ID and Trusted Certificate Settings, does not want to delete.
Tank you.

It's not clear to me what you're trying to accomplish. If you get rid of your digital ID you will still be prompted to create/add one when you need to sign a form, which you say you still need to do? Do you really just want to e-sign (hand-drawn signature, or stamp) instead of digitally sign? Do the forms you're using have digital signature fields?

Wrong Digital Signature

Similar Messages

Maybe you are looking for