WRT320N wireless function dosn't work

Hi I have a laptop with wireless card broadcom 802.11 a/b/g wlan. It cannot connect to wrt320n on wireless. I only thing I have made on the router is to change my ssid-name, setup the wireless security to wpa-personal. My wireless card can see it but not logon to it. I have also tried with another pc and it didn't work. If I plug cable in it, it works... What shall I do? Thanks for any help

Are you getting any error message on the computer..?
Try to readjust the wireless settings on the router..Open the setup of the router and Under the Wireless tab,Set the Channel Width to 20MHz only and Channel to 11 and click on save settings.Under the Advanced Wireless Settings...Change the Beacon Interval to 50,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Now,power cycle the network and check...

Similar Messages

  • HP P1102w Wireless Function Doesn't Work!

    - I am tech savvy
    - used search, google, etc.
    - Mac OS X 10.8.3
    - HP P1102w, driver 5.0
    1. installed "HP LaserJet Full Feature Software and Driver"
    2. watched http://youtu.be/c972ybZvZzo
    3. after inputting my wireless information (SSID, password), I am redirected to a blank page with this url: http://localhost:5050/cgi-bin/ip_wireless_result.htm
    The USB works, but the wireless feature doesn't work at all. Why does life have to be so hard? This is extremely frustrating.

    I know that sometimes just pressing the wireless button one time can disable the wireless feature unless you are certain your wireless feature is completely broken.  I suggest holding down the cancel button for five to ten seconds until the configuration page prints out and it will provide you with some information in the network section (for example: Wireless DISABLED) if it is not working.  
    Also, here is a link to the firmware update for this printer designed for your Mac -  Version: 20130213.  I know this printer can be confusing so here is a link with the User Guide for this model.  
    I would print that configuration page and try to update the firmware and see if that fixes this for you. Let me know if it works.  If not, do you see anything in the network section of that page that prints out that says it has been disabled?
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Wireless function is not working.

    I have HP Photosmart Premium C309, the wireless radio is not functioning.  What should I do?

    Well unfortunately when the printer has this error it usually means the wireless radio really did fail.  However, all is not lost.  Since this printer has an Ethernet port I have a $21 fix.
    Go here...
    Connect your wireless printer when away from home in a hotel/motel/dorm room with total security.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Connect-your-wireless-printer-when-away...
    At the end of my article you can plug an Ethernet wire into this TP Link unit and get back your wireless.  Set this unit to Repeater mode.  Hope this helps.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • New Apple Wireless Keyboard Function Key not working ON 10.5.8

    Tried updating keyboard os, disconecting reconnecting. Selecting/deselecting option in keyboard options.  power off and on
    Cannot get function key to work
    Thanks

    found answer here- my wireless keyboard model is  MC184LL/B
    http://store.apple.com/us/question/answers/product/MB110LL/B?pqid=QXXHTX4T747AAF PXKHXCC72CYAXYU7XXYUPK9UFC74K27FPKF
    The Function keys will not all work properly on 10.5.8, all the other keys will be fine.  The previous model MB110LL/A would work with all the Function keys on Leopard or Snow Leopard.

  • HP 3330 MFP scanning function doesn't work

    I have a HP 3330 MFP wirelessly networked to (2) computers via a WPSM54G.  I am able to wirelessly print from both computers, but I am unable to scan from either.  When I open the HP LaserJet Document Manager, and initiate a scan, I receive a message "hp LaserJet Scan Control Viewer...Unable to communicate with the device.  The device is disconnected or powered off."  (The MFP is "on", and if I power the HP 3330 MFP "off" and "on", the result is the same.)
    If I connect the printer directly to the computer(s) via a USB 2 cable, the scanning function does not work - since the Linksys printer drivers were installed.  (I also noticed in Control Panel -> Printers and Faxes, there are some printer functions (ie., Scanning, Fax) have been removed - since the Linksys printer drivers were installed on the computer(s); and Network HP LaserJet 3330 (shared) was added as the default printer.
    Since the printing function works fine, I'm wondering if 1.) the installation of Linksys printer drivers on the computer(s), removed or altered the HP drivers/scanning function, 2.) if there is a printer driver that will allow the computer/printserver to recognize a scan command and/ or the printer, or finally, 3.) if the HP 3330 is simply not capable of perfoming all of the functions (scanning, faxing) that the WPSSM54G claims it is capable of perfoming...
    Any ideas?
    Thank you for your thoughts.
    saj

    Got it working.  The problem was with the firewall (Bit Defender).  Once I turned it off, and connected the print server (wirelessly), the scan function worked like a charm.  (It would be nice - in a perfect world - if when the print server experiences a problem, the Linksys software/ drivers would identify the cause, and at least point you in the right direction....you know, something like "...can't communicate with device, try turning off your firewall")
    Hope this helps someone.
    saj

  • Satellite Pro 4600 Wireless card does not work with WIN2K ?

    I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
    The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
    However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
    the router works ok with other laptops in my house.
    I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
    The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
    What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
    Thanks

    hello
    please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
    In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
    START QUOTE of Toshiba Support response:
    Sat Pro 4600
    Serial No: 31474181G
    Windows 2000 SP4 (customers build not recovery CD)
    BIOS V1.80 not current therefore updated to V2.60
    The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
    I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
    As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
    5 x B16 Screws
    1 x B6 Screw
    1 x Memory Cover Screw
    END QUOTE

  • Scan function no longer working on my Printer

    Recently moved locations and had to re set up my PC. Since then the scan function no longer works. I get the error message "Scanner reported an error", "Failed to open a session on the device". I have uninstalled and reinstalled the HP drivers, i have checked the internet connections and all are working. Actually have had a lot of troubles earlier with the rinter and the scanner re wireless connections but hoped to have finally overcome these.
    Not part of the problem but a real gripe as to what is the purpose of wireless devices when they never work as well as the ethernet connected devices, someone really needs to get this sorted <gripe over>.
    Can anyone help me please to get my system back up and running. I surgent now as currently on paternity leave and need to get some administrative issues doen from home in the next couple of days.
    Many thanks,
    This question was solved.
    View Solution.

    StevieDoug,
    Thank you for trying my recommendations, I believe this is a wireless issue. Let's go ahead and start troubleshooting the network:
    I would like you to shut down the Router, Printer and Mac in that order. Wait atleast 60 seconds, then power on the items in the way they were shut down. Re-attempt the scan. Was this successful or are you still getting the error message?
    If you are still getting the error message, let's try Pinging the Mac and testing the connection, click on the link below:
    How to Ping on Mac OS
    If pings are successful the issue is not likely communication, instead it is probably a firewall blocking the scanning communication. Continue below:
    To turn on firewall protection:
    1. Choose Apple menu > System Preferences, click Security, and then click Firewall.
    2. 

Open the Firewall pane of Security preferences 


    3. Click the lock icon to unlock it, and then type an administrator name and password.


    4. Click Start to turn on Firewall.
    To allow only specified applications and services to connect:
    1. Click Advanced.


    2. Click the Add (+) button, and then select the application or service in the dialog that appears.
    Are you able to complete the scan? Please let me know the results!
    Thanks again,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Windows 7 Brightness and Function key not Working Properly

    i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it  came with windows 8.1 preinstalled than i installed windows 7 ultimate.
    i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
    2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

    Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • New apple wireless keyboard doesn't work after upgrade to leopard on mini

    I am posting this because I have not seen anybody else post this issue, but it is fixed at this point.
    I installed the new apple ultra slim wireless keyboard on my mac mini about a month ago...was working great...until I upgraded to Leopard. The keyboard would connect, and the esc, function, and arrow keys would work great. However, none of the letter, number, or enter keys would work. This was all observed using the 'show keyboard viewer', which is accessible by allowing 'show input menu in menu bar' from the 'international' system preference pane.
    I rebooted many times and even updated to the latest leopard patch set.
    During this whole time, the wireless mighty mouse has worked without issue.
    I removed the device and added several times with no change. I even moved the wireless keyboard to my G5 and it worked great over there.
    After a few days of trying various things to no avail, I was finally able to get the keys to work, but I am not sure why. I had a wired keyboard connected and kept going back and forth between the wireless and wired keyboard and all of a sudden it started working. Very strange.

    this problem is fixed, but if anybody has an idea what happened, I would like to know.

  • Toshiba Satellite C850-F12S Function Keys not working

    I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

    Hi Eldorado
    Thanks for your suggestion. Have done as you said but still have the problem.
    I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
    I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
    Cheers
    David

  • Laser Jet M1217nfwMF​P wireless and fax stopped working printer works with usb cord

    I have an HP computer 64 bit version.  The printer suddenly stopped working wireless, fax stopped working weeks ago.  Printer does work with a usb cord.  Turning it off (removing elec cord) on both computer and printer, didn't help.  Nothing changed that was different to cause either problem.

    Hi agueda
    I see that your Laserjet M1217 wireless and fax stopped working but the usb connection does work.
    I would restore the printers defaults to setup the wireless again.
    Touch the setup (wrench button) on the printer, select network config, select restore defaults.
    Then make sure the wireless radio is turned on.
    Touch the setup button (wrench), network configuration, wireless menu, wireless radio-on.
    Temporarily connect the usb cable from the printer to the computer and go to start, all programs, hp, laserjet m1217 and select wireless configuration and go through the wizard to reset up the wireless again.
    or if your router has a wps button on it then you touch the wps wireless button on the printer and immediately touch the wps button on the router.
    Printer should automatically connect to the wireless network.
    Run the add printer wizard.
    Go to control panel,(win7) devices and printers then click add a printer, next, select network
    highlight printer, next, message installing printer.
    Should be able to print over  wireless again.
    Check  fax connections.
    Then run a fax test.
    Touch the setup (wrench button) on the printer, service, run fax test.
    You should have 4 passes.
    Change these fax settings on the printer.
    private receive-wrench/fax setup menu/ok/fax receive setup/ok/private receive/ok/set it to off
    error correction-wrench/arrow to fax setup/ok/all faxes/error correction/ok/set it to off/ok
    speed-wrench/arrow to fax setup/ok/all faxes/ok/fax speed/ok//change speed to medium.
    clear saved faxes-wrench/fax functions menu/clear saved faxes/ok/ok to clear.
    Try sending and receiving a fax.
    If you have any further issues please let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Function keys stop working

    For a while now, I've been encountering a problem where functions keys stop working. Pressing F8 (for spaces) or F12 (for widgets) will simply yield a "bonk".
    Another symptom is that processes which open on a desktop other than the current one will fail to open because the desktop seems reluctant to switch.
    I know other people have experienced similar problems because there is a post about spaces' keyboard shortcuts not working. The issue has not been resolved for many many weeks now.
    I use a logitech wireless keyboard and trackball (with the logitech control application installed)
    Sometimes this error will occur immediately after booting up. Sometimes it will go for days working fine. I consistently have 4 applications running:
    - iTunes
    - Thunderbird
    - Firefox
    - Adium
    The other most common apps I run are:
    - Quicktime
    - Aperture
    - iMovie
    - Preview
    Yet Another symptom of the problem is that the machine will refuse to shut down or restart. If I kill every "windowed" process in Activity Monitor, the machine will STILL fail to shut down. Ultimately, I have to do a 5-second hard power-down.
    Any ideas/suggestions would be greatly appreciated.

    I am running into the same issue
    I use a Logitech Wireless Mouse.
    The switch Spaces keys, F9/F10/F11 for Expose are not working either, the Mute/F10 Vol Up, Vol Down F11 and F12 work as does the Eject button.
    F18 Show Dashboard or F4 Show Dashboard don't work either.
    Most frustrating

  • Is there a way to use my iPod Nano to listen to a radio frequency with wireless headphones.  It tells me that I have to plug in my headphones to receive the stations and when I do, the wireless headphones don't work!

    Is there a way to use my iPod Nano to listen to a radio frequency with wireless headphones.  It tells me that I have to plug in my headphones to receive the stations and when I do, the wireless headphones don't work!

    No. I'm sorry. But, i think it uses the headphones as an antenna so it has to be plugged in to headphones in order to make it work. but, it burns the battery down so i don't use the radio function that much.

  • Mouse functions don't work

    my mouse functions have stopped working! It doesn't matter what mouse I use - wireless or wired - these are the problems: I cannot click on anything to open or close it. I cannot click on a application on my dock and open it. I cannot drag a file or document on my desktop. I see the cursor moving around the desktop, but it has no effect.
    No solution has worked and I've tried many of them.
    Help!!

    I restarted my laptop, and the buttons worked! For only 2 minutes. Then nada ever again. What a POS. Come on HP, give a solution. I bought and returned it twice, which makes this my third wifi mouse. What a waste of my time. I think I'm just gonna return this mouse and forget the wifi mouse. Functionality is more important than a freed up USB port. I bought it for the forward/backward buttons specifically. HP used to make wonderful products, but this experience bring that into question now.

Maybe you are looking for