WRT54G Net connection

I'm hung up on step 10 of the setup process. My laptop refuses to recognize that the router (a brand-new WRT54G) is connected, even though all lights on it and the broadband modem say otherwise. Internet Explorer won't let me access the Tools dropdown menu. Any thoughts?
(Mod Note : Edited non-technical contents.)
Message Edited by Beetlebum on 09-03-2006 05:11 PM

What's the exact model number of the router? Please check it underneath the router directly below the linksys logo.

Similar Messages

  • I NEED YOUR HELP GUYS!! I WAS DOWNLOADING OSX LION WHEN MY NET CONNECTION STOPPED. THE ICON DISAPPEARED AND IT WILL TAKE 48HOURS FOR THE INTERNET CONNECTION TO BE RESTORED. WHAT SHOULD I DO? PLEASE HELP ME. IM NOT TECHIE AT ALL SO PLEASE.. PLEASE HELP ME.

    The internet was working fine til 10:31am philippine time. Was downloading OSX Lion, at that time it was somewhere half. Then all of a sudden internet failed and lost connection. Called my ISP immediately and was told it would take 24-48hours for the service to be restored. THen after ending the call the OSx Lion icon disappeared. I dont know what to do. Im not techie at all. Please guys. HELP ME>

    Hey allan. I dont know. Nothing seems to change. I still dont have net connection. Im at a net shop right now. (Not using mac.)  What will happen to the OSX Lion that I payed for? The icon was gone. Im still in the middle of downloading it.

  • Regarding Reliance net connect ZTE AC 2738

    Regarding Reliance net connect ZTE AC 2738
    Dear I am unable to install all the drivers on Win 7; Its shwing error log Also when I am going to connect it again & again its showing please insert in another port while I tried for aal the port.
    Please Suggest

    You need to contact Reliance Technical Support for assistance:
    http://www.reliancenetconnect.co.in/
    This is not a Microsoft product and the manufacturer/vendor has sole responsibility for support of their products.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Can anyone explain why airport connects but no Net connection?

    greetings all, i have a small and what i hope is an easy problem to solve..
    my parents have wi-fi as well as my brother in his home, all i do on my macbook pro is turn airport on and it connects seemlessly..and i'm on google in 2 sec's...
    but WHEN i go to my brothers house.. airport finds the network and jumps on it instantly and i have full service strenght. but no matter what i can't connect to any web pages,, they time out and i get a msg stating that i'm not connected to the internet... i eve tried my email prgram and nothing..all other net app's fail too..
    how can this be if airport is finding the network? neither my parents nor brother have their network protected i.e. no WAP or WEP ect... so what is the deal?
    even tho i'm connected on airport its like i'm not.. my brother has linksy's router and his sony viao jumps on it wit no problem at all!
    anyone have any ideas or what i can do?
    oNe
    p.s. at my home which is an apartment there are several "open" networks and again the macbook finds them and jumps on them wit no problem... but i stick to my plug in net connection for security reasons...can't trust open networks.. sides my parents and brother i guess..
    macbook pro 17" pimp ish   Mac OS X (10.4.2)   it came stock..

    I wish that was the answer, but it doesn't seem to be the case. I have a Linksys wireless router in my office with no other users and no security provisions installed. Most days, I can bring my Laptop in and connect right away. Other days, like today, it simply will not connect, despite having a full four bars showing. If I go into Internet Connect, it confirms that I am connected to Linksys. However, when it fails to open any Internet page, I get the terrible message "You Are Not Connected to the Internet." I am then prompted to open "Network Diagnostics" to solve the problem, which it never does. Obviously, someone needs to introduce "Internet Connect" to "Network Diagnostics" since they clearly have never met.
    I have experienced this situation in other locations, so it clearly is not limited to the one router. While I am ordinarily a big Mac fan, this problem drives me stark raving mad. Being a simple person, I just cannot fathom how a computer can be connected to the Internet, but...not...connected...to...the...Internet. Since I don't own any firearms, shooting my computer is out of the question and I don't really want to hurl it into the ocean. Any words of wisdom would be greatly appreciated.
    Mac PowerBook G4 12"   Mac OS X (10.4.9)  

  • I have an ipad3(wifi  cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • WRT54GS Not Connecting to the PC During Setup

    WRT54GS Not Connecting to the PC During Setup
    Someone please Help me!!
    I Have a laptop im trying to set up wirelessly through this Router and having problems.
    When following the setup disc it keeps coming up that it cant find the router although i have followed the instructions and have them connected via the network cable..
    Any Help anyone.. please?
    Louis R

    What is the IP address you are getting on this PC? Check if you can ping to this router with its IP address (default IP: 192.168.1.1) if not then try resetting it for 1 min by pressing the reset button. Once you get the ping then you can try configuring the router.

  • E51 Wireless Lan - Net Connection Time Out

    Hi all,
    I cant get my E51 to open websites. It connects to my wireless LAN fine, but I get the message Net Connection Time Out when I try to browse to any website. Before the message comes up, it takes a minute or so of blank screen before the error message appears.
    I have a netgear router and I use WEP. The key is entered correctly.
    Has anyone come across this before?

    this probably is a case of a bug in ur device so what u can try are: plz make a back up
    take out your sim card and put in *#7780# to restore factory settings. you should not lose any data, but all settings will go into default. try that first.
    the second option is a reset *#7370# this one will erase all of your data, 'wipe the phone clean' and restore to factory settings. see if any of these options work and if you are able to use your phone as you like/need to.
    the third option U can go in for a hard reset which will turn ur device as it left the factory totally new
    U can also update/reinstall ur firmware and see the result...
    Also use ur device without the memory card and see
    in case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
    menu--tools--memory---options---format memory card......
    remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
    or insert ur card in any reader or laptop and check for virus and also the hidden folders.......
    Articles posted courtesy engadget
    keep us updated about the progress.... if u like wat I have to offer then click on khudos.

  • Slow net connection...

    i m using dial-up connection.....
    i hav n73 with software version 2.6.
    any one tell me how much time it will take to upadate.
    Is ther any other way to upadate ? except online

    Chances are you'll brick the phone updating via dial-up net connection because it is known to be unstable and can interrupt the update process..I'd suggest that you got a Nokia Service Center and have them update the phone themselves.

  • Safari not connecting on Windows 7 - good net connection

    I apologize if this was addressed before.  I looked through the forum and did not see anything about it.  I have updated at least 5 systems to Safari 5.1 (PC and Mac) and all have gone fine except one Windows machine.  Since updating this machine a few days ago I cannot use Safari to connect to the internet.  The browser opens fine, recognizes if it is not the default browser, and spins as though it is contacting the server, but never loads the page.  There is a problem with Safari, Webkit2WebProcess.exe, and this PC.  To save all the basic suggestions here is what I have done:
    1. Emptied the Cache
    2. Reset Safari
    3. Deleted Safari
    4. Re-installed Safari
    5. Deleted and Re-installed all Apple software on system (Itunes, Bonjour, Safari, etc.)
    6. Deleted Firefox, Safari, Apple Apps, updated everything, installed Safari
    7. Turned off Windows Firewall
    8. Added Safari to list of approved programs in Firewall
    9. uninstalled flash
    Obviously none of this worked.  The net connection is good.  Firefox, Chrome, IE, etc. all work fine.  Safari and now iTunes cannot seem to use the connection though.  Even more interesting, now when I launch Safari 5.1 on this PC the CPU jumps to 100% usage.  Safari and Webkit2WebProcess.exe split the processing power 50/50, then just hang there.  I have let it run for hours just to be sure and the programs never get any further along. 
    Any ideas why Webkit2Webprocess.exe and Safari are such processing hogs on this system and never advance further than launch?  Any ideas what I can do to resolve this issue?
    Thanks Dennis

    I have the Same problem i did try every thing , IE, chrome and firefox are working fine, safari and iTunes are not connecting to the internet

  • WRT54GS wireless connection becomes unreachable every 3-6 minutes

    I just got signed up with COMCAST (TV, Internet, and VOIP). The Linksys WRT54GS is connected to the COMCAST Internet-VOIP box. Everything is working fine except the wireless. I bought the Linksys WRT54GS and when I run "ping 192.168.1.1 -t" from my latop via the wireless the connection becomes unreachable every 3-6 minutes. When I "refresh the list" from the laptop the connection is working. The wireless is using WEP security, the strength during the test is 3-4 bars. The problem has been seen in the same room (7 ft away) with 5 bars. I've not yet contacted COMCAST because at this time my thoughts are that I've misconfigured the Linksys. Allen

    Allen:
    If you purchased the router elsewhere, save the call to Comcast. They won't help you.
    Try changing to different channels in the router. There may be interference in your area that causes the drop. I would point out that a dropped ping occasionally is normal, although when it negatively impacts your ability to stay connected, you'll want to find the issue.
    The default channel on the router is 11 I think. Try going through all the channels from 1 on up and running each one for a period of time. Your wireless card doesn't need any changes made; it should reset itself to the new channel within a few seconds.

  • OID Replication - Unable to test Oracle Net connections to a node with SQL

    Hi all,
    I am implementing OID replication and currently stuck on the verification part where I should use SQL*Plus to verify if TNSNAMES.ORA is configured correctly.
    First server installed as a regular OID installation. Second server is installed with a high availability option.
    Server1: name: server. Domain: domain.com
    Server2: name: oid1. Domain: galaxy.com
    My TSNAMES.ORA:
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server.domain.com)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    OIDREP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = oid1.galaxy.com)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    So, the configuration instructions state to test both WITH and WITHOUT the domain name:
    IMPORTANT: Test Oracle Net connections to all nodes from each node in the DRG.
    Use SQL*Plus. Test both system@net_service_name and system@net_service_name.domain.
    IF THIS DOES NOT WORK, THEN ASR REPLICATION SETUP WILL NOT BE SUCCESSFUL!
    So, my SQL*Plus statement "*sqlplus "sys/abcd1234@orcl as sysdba"* works just fine.
    But the command "*sqlplus "sys/[email protected] as sysdba"* fails with ORA-12154: TNS:could not resolve the connect identifier specified
    Thanks in advance for your input.

    Vijay,
    Thank you for your help. I was able to connect to my first instance without any issues. My next problem is updating TSNAMES with the second server, I am still getting the error message when connecting via SQLPLUS. May be my SQL statement wrong?
    sqlplus sys/[email protected] as sysdba" or sqlplus sys/abcd1234@OIDREP as sysdba Neither one is working :(
    Here is my TSNAMES. For now, I am using IP addresses
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.192.141)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    ORCL.DOMAIN.COM =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.192.141)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    OIDREP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.192.137)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    OIDREP.GALAXY.COM =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.192.137)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    -----

  • Net Connect 3.2.3 error messages

    SunOS 5.9 Generic_118558-24 sun4u sparc SUNW,Sun-Fire
    error log messages
    pr 5 10:44:00 sno00004 EventProvider[4984]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5267]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5269]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5271]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5273]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5275]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5277]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5279]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5281]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5283]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5285]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:51:00 sno00004 EventProvider[5288]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5508]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5510]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5512]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5514]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5516]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5518]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5520]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5522]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:00 sno00004 EventProvider[5524]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:01 sno00004 EventProvider[5526]: [ID 130514 daemon.error] new_PvrLock: already locked
    Apr 5 10:58:01 sno00004 EventProvider[5528]: [ID 130514 daemon.error] new_PvrLock: already locked
    what take away mistake ???

    Hi,
    Please note that this forum is for patch tool issues and not Net Connect problems. We would recommend either posting to the Net Connect forum or e-mailing Net Connect support at [email protected]
    Thanks.

  • I had a problem with my WRT54GS not connecting to my inte...

    I had a problem with my WRT54GS not connecting to my internet until I cloned my old routers mac address. I was using a BEFW11S4 which was bullet proof and worked for several years until I changed to Wireless G. Upon purchasing the WRT54GS and setting up all parameters exactly like I had before I could not make any connections, wireless or otherwise until I cloned my mac address to the same address as my previous router. Apparently my ISP had that mac address registered and would not properly perform DHCP even though all other paremeters were correct. I read lots of messages here on line with issues with the WRT54GS connecting and this fixed my problem outright. If you upgrade from a previous generation router (Linksys or otherwise apparently) copy your old routers mac address and clone it to your new router and you should be able to connect. This fixed my problem after several hours and days of troubleshooting. Good Luck Karnage

    As an alternative to using MAC address cloning, you can phone your ISP, tell them you have a new router, and tell them to reset their system to accept the MAC address of your new router.   This way, you won't have to remember the old MAC address, in the event that you need to reset your router to factory defaults.

  • HT1766 I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please a

    I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    There is something Definitely wrong with iOS 7 regarding DATA USAGE being logged to wireless carrier in for WIFI instead.
    I read all the previous replies and same issue.
    I rarely use my mac to sync....its all wifi sync for the last 2 years....never had this issue before... and i know it began with iOS7.... here is why....
    My iPhone was at home when I updated to iOS7 connected to wifi...but it logged Data Usage to Rogers Wireless (700MB approx)...data will never do an update over 50mb in app store (it gives the warning to use wifi) I play a lot of games and pay for them so I always update through App Store.  2 weeks later, simposons halloween update (650mb)...at home, using wifi.
    Rogers told me there was 700+mb data usage on the day of update and 650+mb data on oct 1.st (tapped out).
    Went over my 6GB plan and paid the fees.
    This has never happened before...It must come to apples attention by now...

  • I can not update because it says the net connection was not clean properly, How to do this to clean properly??

    There was a notification to update Firefox. I did but later a notification says "The update was not successful because there is a net connection that was not clean properly and it happened as well everytime I closed Firefox. What do I have to do to clean this properly?
    Thank you

    Please help!!!! everytime I update I got this notification always,
    ''''''"The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly."''''''
    How can I solve this problem?
    Thank you?

Maybe you are looking for