WRT54GS Not Connecting to the PC During Setup

WRT54GS Not Connecting to the PC During Setup
Someone please Help me!!
I Have a laptop im trying to set up wirelessly through this Router and having problems.
When following the setup disc it keeps coming up that it cant find the router although i have followed the instructions and have them connected via the network cable..
Any Help anyone.. please?
Louis R

What is the IP address you are getting on this PC? Check if you can ping to this router with its IP address (default IP: 192.168.1.1) if not then try resetting it for 1 min by pressing the reset button. Once you get the ping then you can try configuring the router.

Similar Messages

IPhone not connecting to the Internet during setup. This means I cannot backup from iCloud. Help!

Hi,
I was having some issues with my iPhone. I went to the apple store and was told that I was experiencing common software issues and that the best thing I could do is restore my phone to factory settings and then restore from iCloud.
I successfully restore my phone to factory settings, however now I am trying to set up my phone, I cannot connect to wifi and as you know wifi is needed in order to restore backup from iCloud. I do not have an iTunes backup so iCloud is the only option for me.
I am at a complete loss. Please can somebody help!

It only has one Ethernet output and all the devices do connect to the Internet when the switch is out the equation they are hooked up directly through the modem.
You have a simple cable modem that must connect to a router with 3-4 Ethernet ports, then you can connect an Ethernet switch to the router, or if the router has enough Ethernet ports, you can connect directly to the router.
This could be an inexpensive wired only router and you could plug the Express into one of the ports to provide wireless for your network.
Unfortunately, you really need an AirPort Extreme or similar product, since the AirPort Express cannot do what you need without another wired only router.
Be sure to reset the modem and power it off for 10-15 minutes before you connect it to the new router.

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

My Linksys WRT54GS says that I am not connected to the internet, but I really am. Why?

My Linksys WRT54GS says that I am not connected to the internet, but I really am.
The Linksys EasyLink Advisor is telling me that there is a problem and the internet connection is not working.
However, my computer and every other computer and laptop connected to this router can get on the internet perfectly fine without any problems.
Why is it saying my connection is not working when it really is? How did I get rid of this message?

Probably you need to uninstall the software to eliminate that problem.

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Could not connect to the update server?????

Hi this is Om Prakash,
I am recently bought an Blackberry PlayBook.During the initial setup update process every time it shows
"could not connect to the update server.(2011 or 3000 or 3001)"
I try desktop option but the update is failed at middle and I try to update again but it try to load already downloaded and shows error message.
I cant able to use my device.Plz provide me an solution.
(sorry for my English)
Thank U

Hey Prakashom,
Welcome to the BlackBerry® Support Community Forums.
This error can be generated if there is no Wi-Fi connection, retry connecting to the Wi-fi access point or try connecting to a different wi-fi access point and try again.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I want to load Firefox on my computer at home, which is not connected to the internet. I want to download Firefox to my flashdrive and then add it to my computer at home. When I try to download Firefox, it won't let me change the path of where it download

I want to download Firefox on a flashdrive so I can then download it to my home computer which is not connected to the internet. When I download Firefox, it won't let me change the path and so tries to download on a public computer, which isn't allowed. The reason I want it on my home computer is because I'm creating web pages and I want to view my html pages using a variety of browsers, including Firefox.

From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

Printer is not connected, yet the cord connects the printer to the computer

printer is not connected, yet the cord connects the printer to the computer, HP Office jet 6700, computer Mac OSX 10.9.4

Hello jbsarts,
Welcome to the HP Forums.
I see that you are having an issue with a connection error.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning. The document may have "Scanning" in the Title, but it will troubleshoot the issue just the same.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Apple TV "not connected to the internet" when woken up

Hi,
So my Apple TV works fine... Except that every time I wake it up after a long time of being in standby or simply not in use, it tells me it's "not connected to the internet". This is really strange because it IS connected-- even when I wake it up to find that message, I can go on itunes in it, watch podcasts and youtube and basically do everything online. It also HAS downloaded TV shows automatically that I have passes for. Yet every morning when I start using it, I see that message. I usually only see it in the morning after it's not used all night... I don't think I've ever seen it during the day after it's not being used for only a few hours.
What could this mean?

I am also having this problem. It only started happening after I switched from a wired connection to my dsl router to a wireless connection. The message is not there every morning, only maybe 25% of the time. I leave my ATV on all the time, so it is not an issue with standby.
In spite of the message everything works fine - movie trailers, youtube, etc, so it is a minor issue for me at the moment.
I have yet to try buying and downloading a movie, I am wondering if it's overnight download could be interrupted by this problem...
Message was edited by: MikeyTG

The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH.

The dreaded "You are not connected to the Internet" window.

Is it just me, or are others having connectivity problems as the "You are not connected to the Internet" window constantly appears while moving from site to site or link to link? I have a new iMac and just upgraded Mountain Lion, which I now suspect is the problem. I have tried all kinds of hardware/software fixes. Nothing works. Sheesh!

Thanks for the reply, Greg. I do have my wife's Mac laptop to test with. She's experiencing the same sporatic disconnect problem, too. She's on wifi, I'm on ethernet (I keep my wifi off). We're in a home. I upgraded our cable modem yesterday (after this problem started) and checked all the wires/connections; everything seems okay. I thought it was the Mountain Lion upgrade, but this problem doesn't appear to be widespread. Very strange how connection can stop and start (and stop and start) during a short period of time. Never expereinced this before. So now, a hardware problem? But that wouldn't explain my wife's problem, so maybe it's the modem or the service provider (Comcast). I hate like **** to have to talk with them.

Event 31901 – The registry probe could not connect to the registry of the computer name

Hi, I have been doing a weekly SQL query to try and find any high number of events I get in my SCOM environment.
One of the events I have stumbled across is 31901 (“The registry probe could not connect to the registry of the computer <name>”) which comes from the “Collect Registry Probe Module Events”
I have read a couple of previous suggestions on the forum and upon checking I found two different scenarios. For a couple of servers I checked the health and it looked like they had RPC issues. A restart got rid of these problems.
However the ones left seem to have something in common. They relate to hosts referring to SQL “instances/clusters”. So the “logging computer” is the host and the probe cannot to the registry of the “virtual computer”. In other words the computers that can’t
be connected to are all agentless and show as managed by the logging computer under “Agentless Managed”
If I log onto the host with my SCOM action account and run something like “reg query” against the virtual “instance” I get “ERROR: The network path was not found”. I can ping the instance fine though. I don’t really understand how these instances work but
I presume they don’t have services or a registry as such. Therefore is this normal or is there any way I can get rid of the events? I don’t really want to get rid of the rule itself as it did help me find a couple of RPC issues. I could override for that host
if this is “normal” and how it should work.

For issue "31901", you can check below link
http://www.bictt.com/blogs/bictt.php/2011/01/17/error-31901-during-exchange-2003
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali | Facebook:
Mai Ali

WRT54GS Not Connecting to the PC During Setup

Similar Messages

Maybe you are looking for