WRT54G problem with saving changes?

Hello,
To all you people who have this router I need to know if you have experienced the same problem. My problem is that when i get to the wireless networking settings I try to change my network from disabled to mixed and it says it saved but it keeps going back to disabled and in which case I have a feeling that this may be a simple problem or a problem deep within the confines of the computer settings. If someone would help or at least telling me whats going on it all would be appreciated...

Did you set your wireless basic and wireless security?
In Wireless basic did you set your network name?
In Wireless security did you setup your security and key?
Ex Change Linksys to Yankee.
In XBox you should see Yankee network in your wireless network list or profiles.
Greetings from Northern Ontario, Canada

Similar Messages

Problem with "Saved with Id" in Reports

Hi Group,
I am having problem with "Saved with id" functionality.
1.) I created a Query in sq01 as "query1".
2.) Copied the source code of this query into a z program
ztest_query.
3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
4.) Now where/how can I search for this id "1234" to retrieve my list.
5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
SQ01.
Please let me know how this can be achieved.
Regards
Ankur Bhandari

Ankur,
Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
Thanks
Vyas

Problems with Saved Watermarks - Wrong Font Size

Hi,
I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
I created a Watermark (Draft) to be placed on the lower right
corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
When I add this this "saved" watermark to a new PDF, the font size is wrong
(much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
Any Help or Suggestions ?

Hi,
Sorry forgot to add, I am using
Acrobat Professional 8.1.2 on Windows XP Prof.
Cheers
Johannes

Error, problem with saving documents, Illustrator

I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
But when I work only with objects from AI - everything is ok - any error, I can save it.
I have reinstalled and updated AI. And nothing changed.
What is a problem?

<moved from Downloading, Installing, Setting Up to Illustrator>

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago.

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

Problems with saving a file

Hello,
Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
Have i accidentally locked something up?
Regards,
Niclas

Run disk utility on your hard drive to repair your permissions. http://support.apple.com/kb/HT1452

Has WRT54G problem with DynDNS been fixed yet?

The DynDNS.com web site lists some problems with the WRT-54G built-in DynDNS client. See http://www.dyndns.com/support/kb/linksys_wrt54g.html under the section "The Bad".
The biggest issue is that the router will not update the server once every 28 days if the IP address does not change. If accounts are not updated, DynDNS deletes the host account. Their suggestion is to use a paid service. Ideally, this could be fixed in the firmware so the router sends out an update every 28 days even if the IP address never changes.
The DynDNS page is dated January 2005. Has this issue been fixed in the WRT54G firmware in the last three years? I was unable to find the change log for the stock WRT-54G firmware.
I'm setting up a new router for someone else and they need Dynamic DNS. I know I could pay extra for a WRT54GL, install 3rd party firmware, and eventually find a DynDNS client and service pair that works right. If this bug has been fixed, I would prefer to buy the cheaper 54G, and just stick with the stock firmware to save the extra effort debugging time.

We haven't had nay reports of issues with RabbitTV. All I can say is update to Firefox 22 and give it a try.

Problems with Plan Change - Needs Immediate Result

Hello,
I have been a long time Verizon Wireless customer. I have two lines, one of which was assigned to a tablet with a 1gb plan. I maintained this line for the upgrade since my other line has unlimited data. I recently upgraded to the Note 3, and in the process was told that I'd have to establish a new line to accomplish the upgrade. The representative, from Costco, let me know that it shouldn't be a problem transferring the same plan to the newly established line and not to worry about anything going wrong. That night I called Verizon for the first time and worked with a customer service representative who ended up making the problem worse by canceling the tablet line before transferringthe device to the new line. This caused a problem with my sim card, and I have to request a new one because my old was was constantly showing an "aging" status. Even a few days later. The first night consisted of two phone calls to Verizon because the rep mentioned above ended up disconnecting me trying to get over to tech support. The second rep was much more helpful, but wasn't able to do anything and let me know I'd have to work with tech support, but should wait until the next day to allow the sim to "age."
The next day was the 4th of July, so I called back the next day and went through a similar process, spent about 30 minutes with one rep, only to be told my sim was still "ageing" and to talk to tech support. Every time I was connected with tech support it was a minimum 30 minute wait, just to be told that there was nothing they could do, again, and they sent me a new sim card. When i received that sim, at which point it was the following week, I called back and activated my tablet successfully. Hung the phone up and thought all was well, until I saw my balance due the next day. It was nearly double what I usually pay. The representative never informed me that it would default to a prorated amount based on that payment, of 4gb. None of which I need. I called back, again, and was told that I wasn't able to use the old plan I had since it didn't exist anymore. This time the representative was very pleasant, and let me know she'd put a request in to see if the old plan would be possible, given my situation. I was alright with that, and this was the first time I wasn't frustrated after hanging up the phone.
She called me back yesterday letting me know that Verizon isn't willing to allow me to use my old plan, and that there is a new plan options, that is 10 dollars a month. Honestly that was all right, so I called in today to change it to that plan and have it backdated to the date of upgrade to fix my billing issue. During the process of looking up my information, the representative I spoke with today disconnected me. Over the last week and a half I have spent nearly 3-4 hours on the phone with Verizon just trying to fix this issue that was not anything I could have controlled.
The rep at Costco told me I'd have no issues transferring my lien to the new line we opened that day, and the first individual I spoke with on the phone canceled the line too early and further delayed the process by requiring me to request a new SIM card for the tablet. After being disconnected this time, I'm extremely frustrated with the entire situation and Verizon in general. I've been a customer of Verizon for nearly ten years, and for the fist time I am considering moving to another carrier seeing. In that ten year period, I have probably called into customer service less than 5 times. And in the last week and a half I have made more calls, and spent far more time on the phone than every before.
The bottom line is, I need to have the plan changed on my tablet line to something comparable to what I had previously, which was a 20 dollar, 1gb plan with the 10 dollar tablet fee. I need this taken care of ASAP and I need to know it's being done correctly. If Verizon is going to partner with companies like Costco to provide phones to members, and increase their customer base, than these reps need to be better equipped to handle the upgrade process. And it seems that the call centers I have spoken with are a 50/50 shot in terms of reaching someone who is able to do their job effectively and in a timely fashion.
I hope to be contacted with a resolution by today or I will be returning the phone, and looking elsewhere for my wireless needs.
Thank you.
Josh

There is an "undocumented" parameter you need to include in your
page. It MUST be a hidden field value called "p_action". The
form hidden value is either "OK" or "CANCEL" (case sensitive).
Thus, when the form is submitted, this parameter states to
commit the changes. Useful if you have a "Save" button and
a "Cancel" button.

Problem in saving changes in hosts

I am having trouble saving changes in hosts when I edit them in the terminal. So I execute the following directions:
Launch Terminal, found in /Applications/Utilities/ or launched through Spotlight
Type the following command at the prompt:
sudo nano /private/etc/hosts
Enter the administrator password when requested, you will not see it typed on screen as usual with the command line
Once the hosts file is loaded within nano, use the arrow keys to navigate to the bottom of the hosts file to make your modifications
When finished, hit Control+O followed by ENTER/RETURN to save changes to /private/etc/hosts, then hit Control+X to exit out of nano
Once I try to save my changes, the usual window opens where you can choose you file directory. I cant save it anywhere because there is no suitable file or folder that allows me to do that. I searched a bit about that and saw that I can try entering the /private/etc/hosts directory. There I can see the file of the terminal named "Terminal Saved Output" but still cant save my changes there.
Any idea what might be wrong and what I can do?

Hi,
If your using internal table to update use syntax
Update <ztable name> from table <internal table>.
if work area
update <ztable name> from <wa>.
since you want to update just zhof try using
update <ztable name> set zhof = wa-zhof where <some primary key condition>
Also check your code here:
update zco_hoff2 from it_zco_hoff2.
where as you have said earlier that your z table name is zcho_hoff2.
Just use COMMIT WORK instead of addition WAIT.
For more info write UPDATE/MODIFY in ur abap editor and do F1 on it.
Regards,
Amit
Edited by: Amit Iyer on Aug 24, 2009 10:11 AM
Edited by: Amit Iyer on Aug 24, 2009 10:12 AM

Still problems with ID changing in Teaming 2.1?

Hi,
They are still problems with changing the ID from user in the eDIR when they are
will synchronized with the Teaming system?
In the past it was a very bad thing if the user name (ID) was a shortened form the
name of the user e.g. ssmith for Sarah Smith.
When "our" Sarah has married and her new name was e.g. Sarah Stone, new user ID is
sstone, the Teaming system can't "realize" that ssmith and sstone are the same user.
Is this problem fixed in the version 2.1?
THX
Andre

Hi,
A opened a request by Novell and get the answer that all is still the same since version 1.x.
Maybe this behavior will change in the version 4.x.
It's really sad that Teaming can't handle changed IDs.... really sad....
Than we have two ways... first, we change all our IDs to IDs with digits like 1234 or the second way... we use
SharePoint.... really sad.....
I'm wonder me that we are the only firm with such problem....
THX
Andre

Problems with saving decimal data

Hello!
I was faced with problem during saving decimal data via Excel input schedules. We use BPC 7.0 MS, SQL Server 2008.
One of the main customer demands is using decimal comma (",") due to Russian regional settings and standards. We've switched server regional options and one of the client machine's regional options into Russian, all integer data is sent to SQL correctly but during saving decimal data we got error - Type mismatch.
Do you mind how to solve this issue? Or it is possible only using English standarts?
Thanks for your help.
Regards, Maksim.

Hi Maksim,
To understand if you have set correct regional settings for you SAP BPC server you have to check the follow keys:
HKEY_USERS\.Default\Control Panel \ International
HKEY_USERS\S-1-5-18\Control Panel \ International
HKEY_USERS\S-1-5-19\Control Panel \ International
HKEY_USERS\S-1-5-20\Control Panel \ International
HKEY_USERS\S-1-5-21\Control Panel \ International
HKEY_USERS\S-1-5-21.....\Control Panel \ International
should have all the keys for English US.
Kind Regards
Sorin Radulescu

WRT54G Problems with internet, help, used to be fine on old router

Hello,
I've bought this router yesterday and have 4 major problems with it ( I've had a cheap router before this and all these problems didn't occur when I use that old router again):
1: I can't access some sites like gamershell or nvidia.com, while they DO load up with a proxy.
2: I can't download from at least half the sites on the www, for example everything from microsoft.com times out.
3: This disconnects after like 5 mins after starting a p2p program. Why is this thing not able to keep my connection alive ?
4: A lot of sites load slower, my internet speed is same, but it somehow now takes ages for some sites to respond after ticking in their adress or clicking on a link.
I'm Cabled to the router, the router is plugged to an old ADSL isdn speedthouch home modem from Alcatel ( 5 years old the modem is), I'm connected with it with PPTP.
Its a version 7 WRT54G router.
( my isp is planet NL, I'm on a 6mb down 1 mb up connection)
Help! Why does this disconnect with p2p, the cheap old router used to be fine 24/7 with p2p.
Please help, thanks in advance.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 09-02-2007 06:49 AM
Message Edited by Snovvdog on 09-02-2007 07:04 AM

Go to the Setup page and look for the setting called MTU....set it to 1300 and save the settings.... close the browser.... turn off your router by unplugging it from the power.... turn it on after 15 secs then try getting online again.........
Check if you can access the sites afterwards..
"You tried your best and you failed miserably! "

WRT54G problem with saving changes?

Similar Messages

Maybe you are looking for