Wrt54g strange signal problem

I have a new wrt54g and I have a strange signal problem. When I am in the house close to the router I only have a good signal (3 bars) but when I take the notebook outside or all the way in the back bedroom I have a excellent signal (5 bars). I am thinking that something in the house might be interfereing with the signal but I have tried changing the channel and still have only 3 bars when in the house, and 6 bars when I take the notebook outside or to the back bedroom. I am using wap but I tried disabling it and still only 3 bars when around the router.
Any thoughts, and thanks in advance.

I tried it all but still the same but I did find this, when I take then computer in the back of the house or outside the signal goes up to excellent and stays there even if i take it back in the front of the house where I previously only had a good signal. But the only way to get a excellent signal is to take it far off from the router but once it does get a excellent signal it will stay there even when I take back around the router, crazy I know.
Any more advise or thoughts?

Similar Messages

Strange signal problem

ok so i have a an airport express and just recently bought an airport extreme. i am using the airport extreme as the main base station and use the express to boost the signal. the base station is down stairs and i want to get the signal across the house and up one story. i have the express in the middle of the base station and my room. the distance across the house is probably 50 feet. i can get a great signal in my room and i can hook up to iChat and can check my email using the Mail program, but i can't connect to the internet using Safari. when i try it says "check network connection" but i am still conected to iChat. Anyone have any suggestions?

It sounds like it might be a DNS issue.
In a browser try http://17.254.0.91
and report back
iFelix

Strange signal loss on 6020

Sometimes my 6020 has a strange behavior.
The signal lines drop from 7 to 0.. and after 5-10 seconds back to 7.. then maybe 3.. 0 again .. 7 again.. you get the idea.
Because every time the phone gets the signal back some communication between the phone and the operator is needed, if this happens many times a day.. the battery lifetime decreases very much (from 7-8 days to 2-3)..
I don't think this issue is caused by the operator, since I also have a N73 and no signal problems here.
Even more strange.. for the past hour my 6020 is working fine.. but experience tells me that the odd behavior can come back any second.

It's either a software fault or the start of a hardware failure
You will need to visit a nokia care point to get it checked out.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

Very Strange Bluetooth Problem

Hi There
My mac seems to have developed a very strange bluetooth problem. When i try to connect my mighty mouse, it 'connects' then a couple seconds later disconnects, then connects and disconnects etc. during the time that it is apparently connected, the LED on the bottom of the mouse keeps flashing in the way it does when it's searching for a connection, which tells me it ain't connected at all.
Thinking this was just a mighty mouse problem i try connect my iPhone, same problem. This time I do it with the bluetooth preferences open i notice that the status of the iPhone connection has gone funny (like it has not connected on top of the word connected in the status, one atop the other) this weirdness happens irrespective of what you connect, and only to the iPhone status, even if it's bluetooth is off.
This weird status thing has happened before, when i was messing about with bluetooth tethering on my iPhone. So, naturally, i assume the iPhone's buggered up the system somehow. I remove it from the list of paired things and try the mouse again, no luck. I try to re add the mouse, but the pairing process doesn't complete itself before the mouse drops signal again. I can't re-pair my iPhone either for the same reason.
how can i fix this?
Cheers, Joe

Hey there,
Navigate to HD > Users > Your Account > Library > Preferences.
Locate, and move to the Trash, this file com.apple.Bluetooth.plist.
If still no luck, try zapping the PRAM to see if that helps. Instructions on how to do that can be found [HERE|http://support.apple.com/kb/HT1379].
B-rock

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Why I am facing signal problem in my 4s after upgrade to os 5.0.1

Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it

Hi, i also got the same problem. pls let me know if there any luck.
01738855651
Tusher
Thanks Man

Very Strange Internet Problems

I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Sure Signal Problems

Our Vodafone Sure Signal stopped working last month. Vodafone have checked what they needed to and said all is OK. They have advised I speak to our ISP(BT) and check the router settings. Tried doing this through Live Chat, told they are "not trained" for this!
Can I see what the settings are without going through BT?
Appreciate any help
Cheers

There are a number of threads relating to this device.
https://community.bt.com/t5/Other-Broadband-Queries/Vodafone-Sure-Signal-problem-due-to-BT-stability...
For a more general search try
https://community.bt.com/t5/forums/searchpage/tab/message?location=forum-board%3AOtherBB&phrase=voda...
One of the other users on these threads may be able to help with the settings.
If you are on option 1, then your IP address may be shared, which may stop it working. Did you change anything a month ago, like enabling Parental controls?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Galaxy Nexus Signal Problem

Ok, I've had dozens of Verizon Phones but something is going really wrong with the Galaxy Nexus that I own. It started out as the best device that I have ever owned. Then I had a problem with it non-related to the signal issues. The tier two tech support had me do a software update on the phone and ever since, the 4G, 3G and phone signal truly struggle. Calls are dropped. Texts wont go through. And internet is often inaccessible. This is all intermittent and untraceable as far as a pattern goes. So Verizon sent me a replacement device. It was worse...to the point that it would not connect to anything reliably, including wifi. They sent me another device and it was more of the same. I am now out of town and having the problems continue with my original phone. A third device is waiting at my house for what Verizon thinks will solve the problem. I'm hoping it is the answer.
Who else is having these problems. Tier Two tells me that this is not a common problem with this phone. It's hard to believe because, I am 0-4 on this device. Also, if you are having problems, did you start having problems in July/August when an update was possibly released?
Let's hear from you!

I just bought a nexus fully aware of the signal problems but was assured by best buy that it is a sim card issue and they would repeatedly replace the sim card until it worked. I am running 4.0.4 the phone was updated before I bought it or came with the update as it was in an unopened box brand new. I have not had any issues other than I cant seem to get more than 2 bars of service in places where my old phone had full signal. so for those of you waiting for an update it may fix some issues but as far as I am concerned it does not fix the signal problem. I bought 3 of these phones and all three have not gone over 2 bars in multiple locations. no other issues though, phone is very fast and easy to operate and battery is what to be expected on this type of phone as far as I am concerned.

Update to iOS 5 Signal Problems?

hi, i was wondering if anyone experienced some signal problems after ios 5 update? I did and when i was using the beta, it gave me full bars and never dropped calls but after i updated to the final version, my calls started to drop and text messages wouldn't send or recieve. Just wondering if anyone else notices this? I think that the iOS 5 Beta 7 is better then this final version..

I didn't notice any signal problems until today. Today my phone (iPhone 4 AT&T) has become virtually unusable. I upgraded on Wednesday and post upgrade didn't have any major problems other than the occasional application crash. Today my phone will not hold onto a signal for more than 30 seconds. Even if I'm sitting still, the signal drops and the phone goes into searching, no signal and finally reacquires and the cycle starts again. Battery drain is rapid, I'm guessing because it's constantly having to go into signal search mode. Twice the phone has had a hard lockup today where only the home-top button press would resolve.
At this point, I would recommend people not upgrade their iPhone 4 to the new OS. Stability is an issue in many apps and now this signal problem is making my smartphone feel quite stupid.

Signal problems and MES

South Africa - Pretoria: I got my BB 9300 end February and since then I have a signal problem, it is always searching for signal, it will go on SOS and when somebody calls me I can talk for 30 seconds and then it say "call failed". They can't hear me when they call me and I can't hear them. I had the BB Curve 8900 before and had no problems. We have 5 Vodacom phones, 3 cell c, 2 mtn and 1 Heita and they have no problems with signal. My daughter has the bb 8520 as well with no problems. Secondly it is on BES in stead of BIS, I took it to Vodacom but they van't help me.

AppleIncSteve wrote:
this is what apple care says about it,
It is a non issue and all cell phones are due to
have some signal loss as you grip them.
IF you would like to lessen it you can buy a
bumper. Then they offer you one.
apple haven't said anything yet of any note

Strange shutdown problem

Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HI

Hi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod

Strange major problem with 975X PowerUp Intel MOBO

I’m suddenly having a strange major problem with a MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775 motherboard. Previously, it had given me no problems at all.
It went like this:
Powered on system in the morning, booting from a cold start.
Hit DEL key to get into the BIOS.
Missed the window and the system booted into Windows normally.
Re-started the system from within Windows.
Hit DEL key to get into the BIOS and was successful the second time.
Hit the ENTER key on the first item “Standard CMOS Features”.
The DATE, TIME and other information was displayed on the next screen, but at this point, the BIOS screen became completely unresponsive to any keyboard input.
The only thing I could do at that point was to power off.
Subsequent power on boot-ups resulted in the system always freezing at the BIOS splash screen after the video card sign-on.
I have switched power supplies, hard drives, keyboards and video cards. I have disconnected everything except the video card, keyboard and one RAM module. I have switched the four RAM modules around and then reduced the RAM to one 256MB module in the proper slot. I even changed the battery on the MOBO, in case it had shorted out and removed and re-seated the BIOS chip. It still halts at the BIOS splash screen.
The BIOS chip can’t be completely dead, because I powered off and pushed the BIOS reset button on the MOBO to reset the BIOS to the factory defaults. When I re-booted, I could tell that it had actually reset to the factory defaults because I had previously set the BIOS to reboot the system on resumption of power and the factory default was to remain off until the power button was pushed, which was now the default.
I’m stumped! All I can think of is to get a new pre-programmed BIOS chip and see if that makes any difference, but I’m not sure this system is even worth the expense with no guarantee of success. Any suggestions on how I might get past the BIOS splash screen or do I for sure have a corrupt BIOS chip?

System specs as per the posting guidelines -
Board: MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775
Bios: Version (can’t recall & can’t check since it won’t go past the BIOS splash screen)
VGA: ASUS EN7600GS nVidia GeForce 7600GS PCI-e 256MB DDR2 (also tried new XFX nVidia
Geforce 210 PCI-e 2.0 512MB DDR3)
PSU: Chiefmax 680W ATX (also tried new OCZ 700W ATX)
CPU: Intel 2.8GHz LGA-775 Core2 Duo Dual-Core Processor
MEM: 4 x Samsung 512MB 1Rx8 PC2-5300U (2GB total)
HDD: Seagate Barracuda 250GB SATA2 (also tried Seagate Barracuda 500GB SATA2)
COOLER: Intel OEM LGA 775 fan/heatsink C25897-001
OC: No
OS: Vista Home Premium 32-bit
I have been through the BIOS reset procedure several times and pretty much as outlined. As I said before, I could tell that it had taken a reset to the factory defaults, because the power on option had changed.

Strange signal strength values reported by Airport Utility

I am finding some strange signal strength values displayed by the Airport Utility (under the "Advanced" tab):
Client Signal Noise Rate Type
1 -24 -95 54 802.11b/g iPod Touch
2 -59 -90 130 802.11b/g/n MacBook Pro
3 -24 -95 54 802.11b/g Dell laptop
4 -24 -95 117 802.11b/g/n Airport Express
The four wireless devices are all approximately the same distance (about 4 metres) from my base station (another Airport Express).
What seems odd is that:
- Three of the devices show EXACTLY the same signal strength (-24 dBm signal, -95 dBm noise). The graphs are dead straight lines with no wiggles. If I move the iPod away, for example, to a distance of 10 metres, the figures remain at exactly -24/-95.
- The MacBook Pro values behave in a much more reasonable way. The graph has small random fluctuations (and an occasional large peak). If I move the MacBook further away, the signal level drops, as you would expect.
I should be interested to know why the values displayed by Airport Utility make sense for the MacBook, but appear to be nonsense for the other three devices.

The signal strength values now behave as expected. This was probably a result of a Mac OS X update or Airport firmware update. So, I am marking this issue as answered.

Wrt54g strange signal problem

Similar Messages

Maybe you are looking for