WRT54GS v6 -- Can not connect trough router.

I bought this router two weeks ago. I set it up and it was working, only had a small problem since my router was sitting on my speaker base but it has been working fine.
This morning I turned on my PSP to play Medal of Honnor online and my connection was working fine, however when I came back home this afternoon I tried to connect to the EA servers via my PSP but I could not connect. So I came on the computer I to see if I could fix it.
I checked the router: my WLAN, 1 and internet lights were lit as usual. I opened the Linksys EasyLink Advisor and when it was scanning to check my network two warning windows from Norton popped up and told me they had blocked a attempt to connect from my own IP adress. I tried to put my own IP Adress, on the auto-block exclude list, since that is from where it said that I was being accessed from but to no success.I still got the two Norton Warnings that popped up so I disabled Norton completely and tried to start the advisor again, it scanned my network but it said that it found no routers and I could not connect to the internet. Then I connected my internet line directly to the modem and it works now, however whenever I try going trough my router I still get a no connection error.
I have no idea why the router started acting like this. Any help would be great.Message Edited by Thy_Sens_Fan on 03-13-200708:29 PM

yes Frunple is right .. norton may be blocking the connection with the router...so disable the firewall or else try a different computer if possible...check the ip add u get..try to ping the router's ip add i.e 192.168.1.1 . if everything seems to be OK , try accessing the router using http://192.168.1.1 . Logon to the ui and check the firmware on it....it should be 1.52.0 .. if no click here and download the latest firmware ...

Similar Messages

  • Can not connect my wireless printer to the new router.

    Can not connect my wireless printer to the new router.

    Can you please provide details:
    1.  The make and model of printer
    2.  Make and Model of Wireless Router
    3.  Is your printer connection wireless to router or a cable to PC
    4.  What have you done or attempted to do to establish a connection?
    5.  Any further info to assist

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

    Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
    Been to my parents with the i pad and this will connect to their wireless router.
    Can not think of anything else to try

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
     Cheers, Tom

  • WRT54GS Can not detect the router

    We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router.  I am using the router to access the internet and it can't be detected???
    I have powered it off enough times and then some and need to get this running to use the laptops.
    I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
    Thanks

    okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

  • After software Update (2006-07), airport can not connect to the router

    Hi,
    I installed the software update 2006-07. Afterwards the airport extreme can not connect to the router anymore (NETGEAR). I use a WEP key, but even if I type the WEP Key, the airport does not succeed to the router anymore... I called Apple Care and they wanted that I install the firmware restoration. But even I didn't succeed to install the firmware restoration. On the firmware restoration web page (http://www.apple.com/support/downloads/firmwarerestorationcd12.html) is written that I have to turn on the computer and continue holding down the power button until the LED blinks rapidly followed immediately by a successive series of blinks (3 quick blinks, 3 slow blinks, 3 quick blinks). But after the LED blinks, there is not the successive series of blinks...
    I know there is 2 questions in one message, but could you please help?
    Thanks in advance.
    Best regards,
    Eric
    MacBook Pro Intel Core 2 Duo   Mac OS X (10.4.8)  

    http://forums.macosxhints.com/showthread.php?p=337100
    Exactly the same problems as mentioned here kernel panics, etc. How could this have passed Apple Quality Checks?
    Tue Dec 5 09:26:34 2006
    panic(cpu 0 caller 0x000A8800): Uncorrectable machine check: pc = 000000003931288C, msr = 0000000000149030, dsisr = 40000000, dar = 000000003A207F7E
    AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
    L2FIR = 0000000000000000, BusFir = 0000000000000000
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095138 0x00095650 0x00026898 0x000A8800 0x000A7A90 0x000AB780
    Proceeding back via exception chain:
    Exception state (sv=0x39D1B780)
    PC=0x3931288C; MSR=0x00149030; DAR=0x3A207F7E; DSISR=0x40000000; LR=0x39312858; R1=0x2285BA10; XCP=0x00000008 (0x200 - Machine check)
    Backtrace:
    0x39312848 0x393139B8 0x39333874 0x393336BC 0x393332F0 0x3933313C
    0x002D124C 0x393314AC 0x39332774 0x002EB838 0x0008C6A4 0x0002921C 0x000233F8 0x000ABAAC
    0x00000000
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.AppleAirPort2(405.1)@0x392f4000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x386e6000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x32922000
    Exception state (sv=0x39D3A780)
    PC=0x9000AB48; MSR=0x0200F030; DAR=0x003B8000; DSISR=0x42000000; LR=0x9000AA9C; R1=0xBFFFCCA0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
    Just by enabling the airport express card. Now I wonder what triggers the bug. Because I rebooted several times after the update. One thing I did see was the signal strength going less strong in the past days. Since today I cannot use it at all.

  • I have an iphone 4s, and i can not connect to any wirless router through wifi??

    i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network??
    any help??!!

    Seriously...and where did you get this tech tip? You do realize that all iPhone 4S's are still under warranty, although there's a very good chance your freezer trick has tripped a moisture sensor, thus voiding your warranty. Make an appointment at an Apple store, but be prepared for bad news. Good luck.

  • Linksys Wireless Router BEFW11S4 - Shows connected, but I can not connect to the internet

    I have a Linksys Router hooked up to a cable RCA modem using Comcast Cable. There are 3 laptops that hook up wirelessly to the router and they have been working fine for the past two years. However, recently all three laptops can not connect to the internet for some reason. I checked with Comcast and they checked out the modem and tested it and it works fine. When I hook my laptop up to the modem with an ethernet cable, it works fine and I can get  on the internet. When I hook the modem up to the router and try to connect wirelessly it appears to be fine. It shows that the router is connected there is connectivity on all our laptops, however when I open a new internet explorer page to get on the internet, it does nothing. A blank page appears and the webpage will not load. Does anyone know how to fix this? Is it the router or the way it is setup in the admin page or could it be possibly something else? Thanks.

    As it shows connected under wireless ....check the Ip address under wireless network connection .....
    If it shows Ip 192.168.1.X ....with gateway 192.168.1.1 ..... try to pnig the gateway address ...
    If getting reply try going online ....
    Also disable the firewall first.....

  • I have an Airport Extreme wireless router & I can not connect my Kindle.

    I have an Airport Extreme wireless router & I can not connect my Kindle.  Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet.  It says the password is incorrect.  I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly.  I see no tab to create a guest network.  I do not mind giving my password to visitors, but that does not work.

    If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
    As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

  • My macbook pro can not connect to my telus router

    my macbook pro can not connect to my telus 2wire router

    Had a similar problem with Macbook Pro3,1 on 10.5.8 - I chatted with Telus support.  They remotely updated firmware on the Actiontec V1000H modem and it was resolved immediately.

  • Can not connect outside of Lan to with rtsp PVC2300

    I have the following cameras set up at my office
    1 - PVC2300
    2 - WVC54GC
    3 - AXIS 225FD
    I have a BEFSR81 Router
    I have a computer on Windows XP running the surv software to record.  Everything with that is good.
    I also have 2 desktops.
    I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
    1(a).  I can not connect outside of the LAN with RTSP with either the VLC player or quicktime.  It connects and asks for a password and then just hangs.
    The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router.  What am I missing?
    1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well,  so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
    2.  The voice with the PVC 2300  using http outside of the LAN (internet) lags quite baddly and is choppy.  This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem.  But it also happens when I connect to just the PVC2300.  I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy?  I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back.  I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either.  Suggestions?
    3.  This is more of a question.  I know the mobile streaming of the PVC 2300 does not include voice.  Is there an app or way that I can just get it to my Blackberry.  Even if I didnt get the video, voice is sometimes more important to me.
    I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
    Thank you in advace for your help.
    Colin

    Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
    Regarding RTSP access, are you also including the mobile.sdp in the URL?
    RTSP:///mobile.sdp   I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box.  That word may be what you have to include, so check that too...
    Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
    But your forwarded ports look right and should be opened.
    Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

  • Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

    I have a Laserjet Pro 400 MFP M425DN  printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update"  We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
    Any ideas?
    Thanks
    Paul

    I just updated my Firmware on this printer today to the latest version dated May 3 2013 and  Web Services
    worked.  Had the same type of problem you had for months and had worked with HP but could never get
    Web Services to work at my location with my Modem/Router. 
    Had tried at other locations and it would work with the old Firmware.  But for some reason it did not at my
    location with the Modem/Router I was using. 
    Again the latest Firmware fixed it.  I tried all the other solutions that I had found on the internet and non of them worked.

  • Can't connect to router on different network ssh or http

    Hello,
    I set up my router with one interface on my trusted network. I set it up on this network temporarily just for seting it up using interface 0/0. I then configured the other IP on my to-be DMZ giving interface 0/1 a IP address. (I don't have my public IP address, but when I get it 0/0 will be the internet facing port). I plug in 0/1 into my DMZ and left 0/0 plugged into my trusted network. (I am using a Firebox between the DMZ and trusted network).
    I can ping both my 0/1 and 0/0 interfaces, I can conncet via http and ssh to my 0/0 IP, but I can not connect to my 0/1 IP with http (times out) or ssh (nothing on screen).
    Can any one help me out with connecting for management to my other interface on my to-be DMZ subnet?
    Thanks,
    Ken                  

    Impossible to say without seeing complete topology and configurations.

  • Can not connect to Cerberus FTP Server with PASV

    I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
    Here is the log from filezilla
    Status:          Resolving address of domain.com
    Status:          Connecting to ExternalIP:990...
    Status:          Connection established, initializing TLS...
    Status:          Verifying certificate...
    Status:          TLS/SSL connection established, waiting for welcome message...
    Response:          220-220-Welcome to Cerberus FTP Server
    Response:          220 220 Created by Cerberus, LLC
    Command:          USER test
    Response:          331 User test, password please
    Command:          PASS ***********
    Response:          230 Password Ok, User logged in
    Command:          CLNT FileZilla
    Response:          200 Command okay
    Command:          OPTS UTF8 ON
    Response:          220 UTF8 support on
    Command:          PBSZ 0
    Response:          200 PBSZ=0
    Command:          PROT P
    Response:          200 PROT P OK, data channel will be secured
    Status:          Connected
    Status:          Retrieving directory listing...
    Command:          PWD
    Response:          257 "/" is the current directory
    Command:          TYPE I
    Response:          200 Type Binary
    Command:          PASV
    Response:          227 Entering Passive Mode (external IP,195,83)
    Command:          MLSD
    Error:          Connection timed out
    Error:          Failed to retrieve directory listing
    Result of the command: "show running-config"
    : Saved
    ASA Version 8.0(4)
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.10.10 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    pppoe client vpdn group att
    ip address pppoe setroute
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    clock timezone CST -6
    clock summer-time CDT recurring
    object-group service RDP tcp
    description RDP
    port-object eq 3389
    object-group service FTP_PASV_Ports tcp
    description Passive Ports
    port-object range 35000 35999
    object-group service FTPS tcp
    description FTPS
    port-object eq 990
    access-list outside_access_in extended permit tcp any any object-group RDP
    access-list outside_access_in extended permit icmp any any
    access-list outside_access_in extended permit tcp any any eq ftp
    access-list outside_access_in extended permit tcp any any eq telnet
    access-list outside_access_in extended permit tcp any any eq smtp
    access-list outside_access_in extended permit tcp any any eq www
    access-list outside_access_in extended permit tcp any any eq pop3
    access-list outside_access_in extended permit tcp any any eq https
    access-list outside_access_in remark passive FTP port range
    access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
    access-list outside_access_in extended permit tcp any any eq ssh
    access-list outside_access_in extended permit tcp any any object-group FTPS
    access-list outside_access_in extended permit tcp any any eq ftp-data
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1492
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-621.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (inside,outside) tcp interface www server www netmask 255.255.255.255
    static (inside,outside) tcp interface https server https netmask 255.255.255.255
    static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
    static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
    static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
    static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
    static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
    static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
    static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
    access-group outside_access_in in interface outside
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 192.168.10.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    telnet 0.0.0.0 0.0.0.0 inside
    telnet timeout 5
    ssh 192.168.10.0 255.255.255.0 inside
    ssh timeout 5
    console timeout 0
    vpdn group att request dialout pppoe
    vpdn group att localname @static.sbcglobal.net
    vpdn group att ppp authentication pap
    vpdn username @static.sbcglobal.net password *********
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    username admin password rcuFiQnIXLd encrypted privilege 15
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ftp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:ecb5356a2f5e680b
    : end
    I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

    Dan,
    Looking at the output,
    Status:          Resolving address of domain.com
    Status:          Connecting to ExternalIP:990...
    Status:          Connection established, initializing TLS...
    Status:          Verifying certificate...
    Status:          TLS/SSL connection established, waiting for welcome message...
    This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
    You can find more info here:
    https://supportforums.cisco.com/docs/DOC-23206
    Mike

  • TS1967 i have a problem when i try to update or install apps in my ipad, and a message come up says "can not connect to Itunes Store", anyone know why? please advise. however i had update all my detail of payment method.

    i have a problem when i try to update or install apps in my ipad, and a message come up says "can not connect to Itunes Store", anyone know why? please advise. however i had update all my detail of payment method.

    Settings > General > Reset > Reset Network Settings.
    Power cycle the router.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Maybe you are looking for