WS Policies, Bound Properties and CRMOnDemand

I've been trying to figure this problem out for about a week, and was hoping that someone here could assist.
In CRMOnDemand, for a stateless connect, you drop this into your SOAP header:
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-1">
<wsse:Username>USERNAME_HERE</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">PASSWORD_HERE</wsse:Password>
<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">q3rLryh0dfQ1BucKrtpagw==</wsse:Nonce>
<wsu:Created>2012-11-26T20:38:56.682Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
However, there is no clear way to do this in JDeveloper. I think I've tried all combinations of WS Policy and bound attributes, and none of them seem to work.
So, the question is, how do I configure my web-service in my composite application to provide a SOAP document with the above header?

Create a variable and assign the Security Header XML fragment to it. Then open the Invoke activity and go to Headers tab. Select the variable .
Cheers,
Durga

Similar Messages

Bound Properties and Listeners

First i will explain what I'm trying to do: I have two different panels and I'm trying to get the JTextFields to communicate in such a way that whatever i type in one JTextField will show up in the JTextField of the other panel (not necessarily in real-time). I think my problem is more in the design of my program than anything else.
First I have my interface (will i need to extend EventListener?)
public interface BookI {
     public abstract void setName(String name);
}I have a Book class (the bean) which implements the book interface. "name" is a bound property.
public class Book implements BookI {
     private PropertyChangeSupport propertyChangeSupport = new PropertyChangeSupport(this);
     public void addPropertyChangeListener(PropertyChangeListener l) {
     propertyChangeSupport.addPropertyChangeListener(l);
     public void removePropertyChangeListener(PropertyChangeListener l) {
     propertyChangeSupport.removePropertyChangeListener(l);
     public void setName(String name) {
               String oldName = this.name;
               this.name = name;
               propertyChangeSupport.firePropertyChange("name",oldName,name);
}Then i have my user interface which catches the event.
public class BookUI extends JPanel {
     private JTextField nameText = new JTextField(10);
     static class MyNameChangeListener implements PropertyChangeListener {
         public void propertyChange(PropertyChangeEvent evnt) {
            if (evnt.getPropertyName().equals("name")) {
                            // this is where i try to set the new value
                            // the new value will be coming from another JTextField in another panel
                        // nameText.setText(evnt.getNewValue()));
     public BookUI() {
                 // I tried adding the listener something like this
                 // addPropertyChangeListener(new MyNameChangeListener());
     public void setName(String name) {
          nameText.setText(name);
}I have another panel similar to BookUI that has a JTextField and whatever changes i make to it should affect BookUI, the listener.
For example:
public class AnotherBookUI extends JPanel {
     private JTextField nameText = new JTextField(10);
     public AnotherBookUI() {
}Any ideas would help.

I believe I should be able to do this with Listers.
I think I would need to add listeners to my interface like so:
public interface BookI {
     public abstract void setName(String name);
     public void addPropertyChangeListener(PropertyChangeListener l);
     public void removePropertyChangeListener(PropertyChangeListener l);
}I created a new interface so my classes can communicate:
public interface EntityPaneI {
     void displayObject(Object entity);
}This is the UI that should receive the changes
public class BookUI extends JPanel implements EntityPanel {
     private BookI currentBook;
     private JTextField nameText = new JTextField(10);
     class MyNameChangeListener implements PropertyChangeListener {
         public void propertyChange(PropertyChangeEvent evnt) {
            if (evnt.getPropertyName().equals("name")) {
// not sure if this will work
                             String newStringValue = evnt.getNewValue().toString();
                            nameText.setText(newStringValue);
     public BookUI() {
// not sure if the will work
              nameText.addPropertyChangeListener(new MyNameChangeListener());
     public void setName(String name) {
          nameText.setText(name);
     public void displayObject(Object e) {
          setCurrentBook((BookI)e);
          setName(currentBook.getName());
}The above UI should listen to changes from another UI like this one (same thing basically):
public class AnotherUI extends JPanel implements EntityPanel {
     private BookI currentBook;
     private JTextField nameText = new JTextField(10);
     public AnotherUI() {
     public void setName(String name) {
          nameText.setText(name);
     public void displayObject(Object e) {
          setCurrentBook((BookI)e);
          setName(currentBook.getName());
}

Bounding box and pdf export

Hi all,
I'm using Illustrator CS4 and I have interest in the bounding box of a figure when I export it as a pdf. I'm using the crop area tool (also called ArtBoard, ToolShift+O) to set-up by hand the bounding box and then export the figure as a pdf. The problem is that I can observe spurious small white margins in the exported pdf. It seems that the bounding box is not perfectly set-up. Are you aware of this problem? Is there a work-around?
Thank you

I don't think there is per se any problem nor is AI doing anything wrong. Sounds like your bog standard antialiasing/ transparency blending, if elements are not placed and shaped in such a way that their rasterized output perfectly coincides with whole pixels plus the usual issues with trapping, overprint etc., which Acrobat will obey based on its own settings and the properties defined in your AI document and which particularly become relevant if blending modes, partial opacity and raster effects are involved. You need to look into those things more than anything else and find the right combination of settings...
Mylenium

Can you view text outside of the canvas? as with the view menu you can see animation paths, bounding boxes and handles??? many thanks

re: Motion 5
can you view text outside of the canvas? as when using the view menu you can see animation paths, bounding boxes and handles???
I'm in the middle of a text animation design treatment and unless my memory is completely failing I thought this was an option.
An example would be selecting all layers and being able to see all bounding boxes and animation paths while moving along the timeline.
Of course this could be quite a mess if you couldn't selectively chose which layers, its just with this current project it would be so helpful if
I could see the text beyond the canvas to aid in my animations.
many thanks,
robert
Motion 5
2014 MacBook Pro 2.6Ghz i7
16GB RAM
OS X 10.9.5
2011 Mac Pro
4 Boot drives OS X 10.9.4, 10.10, 10.7, 10.8
960GB OWC Mercury Accelsior_E2 PCI Express SSD (Current screaming fast boot drive)
64GB RAM

thanks for both of your responses
I do understand shift + v " to "Show Full View Area" and shift + z to fill screen, etc.
and command + & - for zooming
what I'd like to do is selectively view, say, the text outside of the canvas as you can see the bounding box
which contains the text or object when selecting one or all layers in the layers column
I haven't used this feature in a while though I do recall using it in the past.
Any help would greatly appreciated
thanks,
R.

Regenerate the security files : SecStore.properties and SecStore.key

Hello Expert,
I have a big issue because I lost the both files : SecStore.properties and SecStore.key from the directory /sapmnt/SID/global/security/data. I tried to regenerate the SecStore.properties from another instance. And when I tried to connect via Configtool I have the following error message : The encryption key (usually in the key files) is
not the key that is required to decrypt the data in the secure store file or the system name is wrong (SID).
I think that the idea is to generate the new key file.
Could you please help me to find a solution to solve this issue.
Many thanks in advance for your greatfull help.
Regards
San

Check this out, though it doesn't directly address your problem. It should definately give you more insight.
http://help.sap.com/saphelp_nw04/helpdata/en/cd/14c93ec2f7df6ae10000000a114084/frameset.htm

SOAP Use Adapter-Specific Message Properties and Variable Transport Binding

Hi Friends,
   I am new to use to Soap Adapter. Please help me out bellow doubts.
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
   2. Where exactly we r using below parameters.
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Thanks&Regards
G.Bhanuprakash

Hi,
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
SAP Help says both are needed to be checked when you want to process adapter attributes
Configuring the Receiver SOAP Adapter - SAP NetWeaver Exchange Infrastructure - SAP Library
These attributes can be get/set using dynamic configuration and their technical names are what you have pasted:
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Remote User - the username used to send a message to the adapter engine using SOAP
Remote Host - hostname which the remote user used
SOAP Action - SOAP Action of the XI webservice (sender) / SOAP Action of the receiver webservice
Variable Headers are additional key-value pairs in the HTTP Header that could be accessed in the XI Header using dynamic configuration. The limit is only three though.
Regards,
Mark

When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Author metadata separated by semi-colons truncated in file properties and "Get Info"

I'm using Acrobat Professional 9.0 (CS3) for Mac to edit the metadata for a collection of PDFs to be made available on the web. When I enter the data, I am inputting a list of authors separated by commas, like this: Smith J, Watson C, Brown J. If I click on "Additional metadata", the data I've already entered is transposed into the various XMP fields. And the commas separating the author names are changed to semi-colons. I gather that this happens because XMP wants to separate multiple authors with semi-colons, and Acrobat wants the metadata in XMP fields to match the metadata stored for the file properties. Fine.
However, if I save such a PDF and then use Get Info on my Mac (OSX 10.4) to look at the file properties, the list of authors is now truncated where the first semi-colon appears. The list is also truncated in Windows XP if I right-click and select properties. The list is also truncated when I look at the file properties in Preview on my Mac, or if I look at file properties using FoxIT, or using Adobe Acrobat Reader 7 or earlier. The only way a site visitor will actually be able to view the full list of authors in a file saved this way is to use Adobe Reader version 8 or later.
I would like to preserve XMP/Dublin Core/etc metadata in the proper format in the XMP code, but would also like users of standard, popular file viewers to be able to access the full list of authors. Is there a way to do this with Acrobat 9?
Also, once I've saved a file and the XMP metadata has been altered, Acrobat seems to permanently change the way that the authors are listed in the file properties. I cannot manually change those settings any longer without Acrobat overriding my changes and converting commas to semi-colons, or surrounding the entire list of authors in quotation marks. Is there a way to get around these Acrobat overrides and manually take control of my metadata again?
Does Windows Vista read the authors list correctly in the file properties if it is separated by semi-colons?
It seems to me that in an attempt to get XMP metadata working smoothly across the entire CS line, Adobe has jumped the gun somewhat and is now forcing Acrobat users to use "file properties" metadata that is really only fully compatible with Adobe products. Is there a way I can get some backwards compatibility on this?
Thanks for any suggestions or insight anyone can provide to this vexing issue.
Phil.

Bridge has some pretty powerful and helpful features. However, I am unable to figure out how to access the non-XMP "file properties" fields through Bridge, and if I add metadata via Bridge, then I run into the same problem regarding the use of semi-colons to separate authors.
If I had more time, or a larger set of files I might investigate the use of ExtendScript to import all my metadata from an Excel file (where it already exists) into the PDF file properties and XMP metadata.
The best solution for my case though appears to be to use Acrobat 9 and to do the double-edit process for each file. I should be able to just cut-and-paste the metadata from the Excel file, and then if I save the Authors list to the end, I can simply paste it once into the XMP field (through the Advanced metadata button) and then return to the regular file properties page and paste it again in there, where Acrobat will add quotes around it.
Lastly, if anyone else happens to find this post and is looking for similar information, I would recommend searching in the Bridge forum as well as the Acrobat forum.
Phil.

Creating Properties and Methods for an exe built in LabVIEW

Hi all,
How do we create properties and methods for an executable built in LabVIEW.
I know when building an exe, the "Enable ActiveX server" option in advanced has to be enabled.
But after that how do we create Properties and methods for the activeX component.
Your help is greatly appreciated.
Regards,
Muthuraman S
Regards,
Muthuraman

You cannot build your own COM specific properties and methods for the ActiveX interface in LabVIEW, the only thing exposed are the normal VI server properties and methods.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
I am using a mac - OSX 10.7.5
I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
The contents I am placing are all Vector - Illustrator files
But, I wonder about some of the vector files I work with. Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight.
Your help is very much appreciated. Thank you!

Should I load properties and or preferentces into a hashmap??

Would this make any difference performance wise?
I use properties mostly for localized labels so it shouldn't affect much as they're loaded only once. But my code is checking preferences quite often...
On the oder hand prefferences are writen to storage asynchronously but... is this true for reading? does the jvm maintain some kind of preferences cache or does it access back end for each prefference read?
Thanks in advance,
David

oh, I'm sorry if I didn't express my question correctly, let me try again :-)
I'm using both properties and preferences for two distinc pourposes:
First I use properties for localization. I'm not really bothered for performance in this case as these are read only once at startup anyway. I was jus curious.
Second I use preferences for application configuration data persistance. Say the current db url, or some path... This preferences are to be checked a lot of times during programm execution, hence the question.
If preferencesr were not cached by the system then it would make sense to load them into a hashtable at startup and use this instead. If they were in fact cached by the system then I would preffer to stick with the convenience of having the jvm storing them automatically at shutdown time.
Third: there are probably many performance problems in your code,This I'm sure but I've to try caching any problem I can see :-)
Fourth: Property objects are loaded once and then cached.Ok, this part is now clear thaks to your reply and the one from sabre which, of course, I thank a lot.
Regards,
David

Order of execution of named method user properties and server script

Dear All,
If for a Custom method on an applet, we have scripts in WebApplet_preinvokemethod and WebApplet_invokemethod and also for the same Custom method we have applet Named Method user properties and BC Named Method user properties, what will be the order of execution of these scripts and Named Method user properties??

The Private Event Submission sample portlet shows how to achieve this. It is part of the PDK download.
Peter

Best way to store objects' properties and later remake those objects?

I want to create a bunch of objects, set their properties and then save that so on restart, the objects can be reconstituted. Is serialization the best way/ Some other way? I want to store them in XML so I can also create a GUI to show the objects stored.

JoachimSauer wrote:
6tr6tr wrote:
I want to create a bunch of objects, set their properties and then save that so on restart, the objects can be reconstituted. Is serialization the best way/ Some other way?Serialization is definitely one way to do that.
I want to store them in XMLUse JAXB or XMLEncoder/XMLDecoder.
so I can also create a GUI to show the objects stored.What does a GUI have to do with writing XML? I don't see how that's in any way related.Thanks. What I meant was that I want to have a JTree populated easily with that info and I know there's good support for populating a JTree with XML.

Best way to handle .properties and .xml files

Hi,
I have an application which contains so many properties and XML files, these are a part of WAR file which we deployed in
tomcat server. Whenever we make changes to these properties and XML files we redeploy the app and start the server.
Is there any way we can make sure that these files can take changes without redeploying or starting the server?
Please clarify.
Thanks.

Sure - keep them outside of the war. Pick any directory where you can put them (a directory where the server is allowed to read of of course), load them from that directory in your application. Make sure you can reach that directory through (S)FTP to easily be able to modify them. Then all you need is a way to reload them in the application, should the information be cached.

Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002

Following situation. In SCCM we have one Standalone Primray Site Server and two Site Server. The two site server are also SMS Provider. MDT 2012 was installed on all three Servers and the Config Manager Integration was run. When starting the Console
on any of this server and editing an MDT Task Sequence, it occasionally pops up an error "An error occured when loading the task sequence". TaskSequenceProvider.log File throws a lot of errors:
[PID: 2824] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
[PID: 2824] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Tried removing the integration on all SMS Provider Machines and readded them. It does not make a differenence. Does anyone know if MDT supports the use of multiple SMS Providers? When I only use one Provider and deinstall the other two, it works ok.

Some more info from the log files:
TaskSequenceProvider.log
[1680680 PID:5228] Initializing provider for namespace root\sms\site_P01 TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[1680680 PID:5228] Initialization of provider for namespace root\sms\site_P01 succeeded TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Invoking method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to export task sequence to XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Done with method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Setting status complete: status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Setting status complete: status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
SMS Provider logs the following:
CExtUserContext::EnterThread : User=A2\trth1 Sid=0x0105000000000005150000001BB949E9D7F6AADBC3309AA56BAB0000 Caching IWbemContextPtr=0000000005777900 in Process 0x9f8 (2552) SMS Provider 20.06.2012 10:51:47 3008
(0x0BC0)
Context: SMSAppName=SMS Administrator Console SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: MachineName=vswlieca2146.A2.loc SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: UserName=A2\trth1 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ObjectLockContext=fdf8ab87-cf50-43bd-a48a-d5bb99c8034f SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ApplicationVersion=5.0.0.0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: LocaleID=MS\0x409 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __ProviderArchitecture=32 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __GroupOperationId=590802 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __WBEM_CLIENT_AUTHENTICATION_LEVEL=6 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CSspClassManager::PreCallAction, dbname=CM_P01 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
ExecMethodAsync : SMS_ObjectLock::ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Requested class =SMS_ObjectLock SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Requested num keys =0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtProviderClassObject::DoExecuteMethod ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CSspSEDO::ReleaseLocks: ********** Releasing SEDO Lock for object SMS_TaskSequencePackage.PackageID="P010013A" for user A2\trth1. ********** SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=91715840 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)

WS Policies, Bound Properties and CRMOnDemand

Similar Messages

Maybe you are looking for