WSUS, DC and CA on same physical machine?

Hi!
Have been playing around with WSUS as we are about to deploy that here and I had time over so I thought that I should learn a bit on how it works, how it's setup and all that.
I have three physical machines to play with, all running WS2012R2. One is master, one runs a hyper-v and the last one I deployed as a DC, ADCS (Enterprise CA) and WSUS:
Februaryserver: Master DC
Marchserver: Hyper-V
Aprilserver: DC, ADCS and WSUS
At my last attempt I almost succeeded, but ended up with an error on the server that tried to use the WSUS Server and that was that a certificate chain was processed, but terminated in a root certificate which is not trusted by the trust provider (can post
logfile if needed).
I have now installed and uninstalled everything 3 times I think because I cant get this working and I started wondering about that maybe, just maybe, it's a bad idea to promote a single server to be a DC, ADCS and WSUS...?
My questions are these: is there any complete guide to how to setup WSUS using SSL  - OR is there a guide to setup WSUS and NOT using SSL? Can't seem to find any appropriate information.
This is my first attempt at trying to understand the CS role, creating certificates and what a CA/CN/CS etc is. Its also my first attempt at trying to setup a WSUS, but I actually might give up and let some third party do this for us instead, time is running
out :(
I have read and followed the following guides:
http://technet.microsoft.com/en-us/library/hh852346.aspx
http://technet.microsoft.com/en-us/library/hh831574.aspx
http://social.technet.microsoft.com/wiki/contents/articles/12485.configure-ssltls-on-a-web-site-in-the-domain-with-an-enterprise-ca.aspx
At my first attempt I didnt pay attention to the guide which covers setting up the ADCS and the result was that the CN was incorrectly named. The second time I thought I got it right but apparently I hadn't. At my third attempt I was just playing around and
trying to setup the whole WSUS without using SSL as ALL our clients are located at the same physical location as our servers.
So... that's about it. Story of my week so far :)
Would really appreciate any help/guidance/support/tips/whatever that might help me out here.
Thanks in advance and have nice holiday everyone!

Ok, thanks for clearing that out. So, WSUS should not be installed on a DC. I suppose I should move both the DC and ADCS to one of the other servers and test again.
The problem with the certificate will most likely remain though. If I setup ADCS on, for example, my machine called februaryserver, the CN till be februaryserver and FQDN will be februaryserver.xxx.xxx.xx, right? Other than installing the certificate as
a trusted root certificate provider, is there anything else I need to do to get this to become a trusted certificate?
Thanks!

Similar Messages

  • Oracle XE on multiple virtual machines on the same physical machine?

    hi,
    does oracle's licensing for 11g express edition prohibit running XE databases on multiple virtual machines on the same physical machine? if not, does the machine have to be "hard partitioned" per oracle specifications (link below) to make it legal?
    http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf
    i found a similar question regarding 10g express edition in the forum (link below), but it doesn't seem like the question was ever definitively answered.
    Oracle XE on multiple virtual machines on the same physical machine?
    thanks

    I thought until I just checked that this was a clear cut no in that it specifies 'a single server'. Now I'm not sure as 'server' is an amibuous term. I at least know that as soon as you start giving developers access to theor own XE instance for dev/testing that there are many VM environments where you can't really know what physical macine your VM is running on to actually be able to tell if you had multiple XE instances running on a single 'Physical' server. I'm not sure the question has been answered by Oracle though.

  • Mac & Windows (BootCamp) Activations on Same Physical Machine

    To Adobe:
    Please would it be possible to free-up the CS6-Cloud licensing to allow simultaneous activation on both OSX and BootCamp-Windows sides of the same physical Mac machine to count as only one (of the two allowed) activations?  The logic is that it is only one physical machine.  No sales would be lost and it would remove an inconvenience, making CS6 more flexible.
    Like most people, my second activation is normally bound to my workhorse-desktop.  The laptop is what gets used to show stuff (like CS6) to other people at other locations.  Sadly unable to give spontaneous (unplanned) demonstration of CS6 on Mac to someone recently at separate work location with no internet connection available (hence unable to do the "boot windows, deactivate, reboot mac, activate" sequence, during which they might have got bored and gone away in any case...).

    David, after spending hours....and I man hours.... the best answer I get from Adobe is that I can't even have Bootcamp installed! Something about the MAC ID for the computer. What's happening for me is that I can't even deactivate in Windows and the reboot into OSX and activate. I get nothing but errors telling me it's already in use on another computer (meaning Windows). Deactivation means nothing apparently since it's the same physical hardware. Adobe needs to fix this! I'm one person on one machine. I cant be in Windows and OSX at the same time through BootCamp. And even if I was uing Parrallels or somthing lke that, I'm still one guy at one computer.... Adobe are you listening!? FIX THIS!!!!!

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • Setup Virtual machine on different subnet on the same physical machine

    Hi!
    I'm a newbie in setting up LDom.
    I have a T2000, and want to setup 2 Virtual machines on it. The control is on subnet 2, virtual machines are on subnet 57 and subnet 15.
    How can I set them up? Do I need to do something on the switch/router side?
    Thanks.

    Hey.
    The IO Domain (Control Domain) would provide virtual switch services to all VLANs. So you could go two ways...
    A) Connect 3 cables from your switch to your control domain, then create three virtual switches, one for each vlan, then plumb the vsw interface for the control domain. Although the vitual switches are defined on the control domain for the other vlans, the control domain does not have an interface into the guest domain vlans. Then you can define vnet devices on the guests, associated with these vsw's.
    B) Have a single cable run to the control domain, and use 802.11 (q or ad, I can never remember) vlan tagging, to encapulate all three vlans in a single cable. In this config, the switch needs to run vlan tagging on the port. You then break out the vlans into multiple vsw's, then apply in the same manner as above.
    I think in newer ldom/firmware versions, there is also a method to assign a PCI card to a domain, but I haven't researched that yet.
    wmreilly

  • Oracle 11g and 12c on same windows 7 machine

    Hi folks,
    Want to try out 12c on my windows 7 laptop but still want to keep my 11g database.
    Anyone tried running Oracle 11g and 12c on same windows machine?
    Any links or guidelines are appreciated
    Thanks

    you won't be the first or the last person to try it.
    this question can be easily answered but why question something that it's easier to test by yourself?
    My advice: Try and if you have problems then question us.

  • Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?

    I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
    Is it possible to install both Tabular and Multidimentional to same physical server?
    Is it possible that some Power View reports use tabular and others multidimentional?
    Could above requirement work in production environment? Anybody tried?
    Kenny_I

    Hi Kenny_I,
    According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
    Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
    Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
    on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
    Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
    on the environment.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Development and Test on same machine

    Hi,
    In my current setup I have a development application, a test application and a production application.
    The dev. and test is on the same machine, with different APP ID's. Dev is 102, and test is 110
    At first there was no problems with this. But now all of a sudden it starts to create problems for me. In APEX you can create a coloumn link on an item in a report. In the column link you can set link text, attributes, the page the link links to and you can set items that should be send to the new page.
    The problem that occurs with the link is that APEX uses the APPS name instead of the APP_ID, so that my link will be the same from the development app and the test app. F.x.:
    http://test.test.dk/pls/apex/f?p=APP
    instead of
    http://test.test.dk/pls/apex/f?p=110
    I think that APEX stores some cookie information on the machine that accesses the sites, and the problem hasnt occured untill these cookies ran out.
    I see 2 solutions to this problem:
    1. Install a new server with the development app
    2. Rename the development APP to something different.
    The problem with no 2. is that I will then have to (re) rename the app everytime I release the app to the test server.
    Let me hear some suggestions. How do other people do this?
    Edited by: bjarkekr on 2009-12-22 13:09

    I would recommend separating DEV and TEST into different database instances - they can still be on the same physical server and even share the web server (if you are using Apache/modplsql). All that's needed is a second DAD pointing to the second DB (e.g. your URLs would then look like http://test.test.dk/pls/apexdev/f?p=APP and http://test.test.dk/pls/apextest/f?p=APP if you define a DAD named apexdev to point to the DEV database and a second one named apextest to point to the TEST database).
    If you really have to stick with one DB, then I believe all you need to do is changing the application alias, not the application name itself, for your DEV application (and yes, you would need to change this setting once you migrate from DEV to TEST, but that shouldn't be really that big deal, it's just changing that one setting on the app definition page...). By default the alias is the same as the app name.
    Holger

  • Oracle EBS is patehtically working on VM Ware although it has same specs as of physical machine.

    Hi Everyone,
    We are running Oracle EBS on Physical machine having specs as follows:
    DB
    X2 Quad Core Xeon 2.4 GHz
    32 GB RAM
    x2 146GB SAS Drive with RAID-1 for OS
    SAN HDD x10 450GB SAS 15K i.e. 4.0TB but RAID-5 implemented (2.3TB allotted to DB)
    x4 NIC but 1 NIC used 10/100/1000
    Apps
    X2 Quad Core Xeon 2.4 GHz
    32 GB RAM
    x2 146GB SAS Drive with RAID-1 for OS
    SAN HDD x10 450GB SAS 15K i.e. 4.0TB but RAID-5 implemented (500GB allotted to Apps)
    x4 NIC but 1 NIC used 10/100/1000
    We are facing serious issues when migrated Oracle EBS on vmware infrastructure.
    Issue are related to high I/Os and high CPU usage hence performance of the application gets down badly whereas same application on physical machine working fine. We would also like to share physical machine is with lesser specification.
    Following are specs of Oracle & VM Ware machine;
    Oracle EBS is with 11g v1.1.07 Database and R12 v12.1.3 Apps
    OS for above applications is RED HAT Enterprise Linux 5.5 64bit
    ESXi version 5.5.0 build 1331820
    Hope to have a positive reply.

    Hi Linjo,
    Thank you for your response.
    VM MAchine specs are as follows:
    (There are two servers, everything is same except local storage.)
    Both servers are HP DL 585 G7 server with;
    Quad AMD Opteron Processor 2.5GHz
    12GB RAM
    x8 NIC
    Local-1 HDD x8 600GB SAS 10K i.e. 5.4TB, RAID-5 implemented
    Local-2 HDD x10 900GB SAS 10K i.e. 7.2TB, RAID-5 implemented
    SAN
    SAN-1 HDD x6 600GB SAS 15K i.e. 2.4TB but RAID-5 implemented
    SAN-2 HDD x6 2TB SAS 7.2K i.e. 8TB but RAID-5 implemented
    Yes, it is a shared environment, like we have other machines are running on VM but we have dedicated cores & memory for EBS Apps & DB servers.

  • Can I use both newly cloned MBPR retina and old-MBP with same Time Machine

    When my new-MBPR retina cloned from the old-MBP back up in Time Machine via migration assistance, will this newly-cloned MBPR continue thereon backing up with the same old-MBP back up in Time Machine? I.e. continuing same timeline?
    And what happen to my old-MBP back up, if I continuing to use my old-MBP with the same Time Machine on? Will TM recognised 2 different MBP and thus creating 2 back ups? I seem to have problem to keep 2 MBP running with same TM. Programs not responding even force quitting them!
    And what should I do to use both? Appreciate your help. Thank you.

    OK, but in general I can use this one device as both file storage and Time Machine.
    I thought that (for some reason) once I set up the Time Capsule to act just as Time Machine storage I would be unable to access it as a plain file storage.
    I have just tested it now, and it seems it can work as both - file storage and Time Machine. I can see the Time Machine backup file on it and folders where I can dump regular files.
    The only thing I would need to occasionally do is delete some old backups to keep Time Machine segment below 1 TB just so I have plenty of space for regular files.
    This thing is awesome. :)

  • I have three computers backing up onto the same Time Machine.  The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers.  How can I do this?

    I have three computers backing up onto the same Time Machine.  The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers.  How can I do this?

    "You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
    Mac 101: Time Machine

  • I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    Hi there,
    I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

  • Using 802.1x and 2 hosts (one physical and one virtual) on the same port

    Hello,
    We trying to utilize the following scenario:
    BYOD with users' windows based laptops and Apple Mac Books
    Virtual machines within each of the physical machines:  For Windows, the VMs will be Windows 7 VMs running within VM Workstation.  For Macs, users will be running Windows 7 VMs within Fusion.
    802.1x set for multi-host
    Using 802.1x, we have a guest network that places the user's physical machine in once it fails authentication.  The virtual machine runs the corporate image, and we'd like to have this VM connected to our corporate VLAN.
    We have been running into this scenario though:
    1.     User plugs his BYOD laptop from into the network.  His laptop gets attached to the guest network because it fails the 802.1x check.
    2.      The VM is powered on.  It successfully is connected to the corporate network.
    3.      Now,  the user unplugs his network cable from his host machine and waits 10 seconds.
    4.      He then re-plugs the network cable to his host machine.
    5.      The VM is the first to authenticate to the 802.1x network and it gains access to the corporate network.
           6.      Due to the VM being the first to authenticate on 802.1x, the host network connection piggybacks off of the VM, and therefore the host gains access to the corporate network
    Obviously this represents a no-go if the user's BYOD computer is able to access the corporate network.  Is there is any specific way that 802.1x can be configured to prevent this from happening?
    Thanks,
    Mooge

    Multi-Host is not the right option for you. In this Multi-Host only one device has to successfully authenticate to authenticate all device on that port.
    You need to set host-mode to  "multi-auth"

  • How to install the windows7 agent and monitor the same machine

    Hi ,
    I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
    Can you please guide me how to install the agent on windows and monitor the same?
    OEM version: 11.1.0.1
    Thanks in advance
    Regards,
    Kishore Tummeti

    If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
    Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
    Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
    Eric

  • When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

    When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for