X11, xinput and the Logitech LX710 Cordless Desktop Laser Mouse

Question

Hello all,
First, lets be clear, the problem I'll describe in the lines below drives me nuts. This forum is my last change before:
1 - Throwing myself through the window
2 - Spend 50€ for a new mouse
Before taking one of those solutions here is my problem:
I bought a Logitech LX710 kit with keyboard and a mouse connected to a single usb bundle. The keyboard works fine but using the mouse can transform you insane. The single click works 1 time on 3, the double click is random, the single click is sometime taken as a press and hold. At the beginning I thought it was an hardware problem but the kit works fine on windows .
So here is how I configure my kit:
¤ Here is what the /proc/bus/input/devices lists
[romain@arch ~]$ more /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=10000000000000 0
I: Bus=0003 Vendor=0471 Product=0331 Version=0100
N: Name="Philips SPC 1300NC Webcam"
P: Phys=usb-0000:00:1d.7-3/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0003 Vendor=046d Product=c517 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=1f
I: Bus=0003 Vendor=046d Product=c517 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:1d.0-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
U: Uniq=
H: Handlers=kbd mouse1 event5
B: EV=1f
B: KEY=837fff042c332f bf08444400000000 ff0001 1f848a37cc00 667bfadd71dfed 9e000000000000 0
B: REL=1c3
B: ABS=100000000
B: MSC=10
¤ here is how I configure X11:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "pad" "SendCoreEvents"
EndSection
Section "Files"
FontPath "/usr/share/fonts/default/Type1"
ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib/xorg/modules/drivers"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
#Option "Xinerama" "0"
Option "AIGLX" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
#Driver "evdev"
# Change the value of the "Dev Phys" option to the physical
# address of the corresponding keyboard, found in the file
# /proc/bus/input/devices .
Option "Protocol" "kbd"
#Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-*/input0"
Option "Device" "/dev/input/event4"
# Configure your keyboard as usual
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
#Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-*/input1"
Option "Device" "/dev/input/event5"
Option "XExtentionPointer"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "Mode" "Absolute"
Option "USB" "On"
Option "Tilt" "On"
Option "Thresold" "10"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "Mode" "Relative"
Option "USB" "On"
Option "Speed" "3.0"
Option "Thresold" "10"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "Mode" "Absolute"
Option "USB" "On"
Option "Tilt" "On"
Option "Thresold" "10"
EndSection
Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "pad"
Option "ButtonsOnly" "on" # IMPORTANT
Option "Button9" "2"
Option "Button13" "3"
Option "Mode" "Absolute"
Option "USB" "On"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Maxdata (RogenTech) B102035W"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
¤ And here is the X11 log:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux arch 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 16:06:45 CEST 2009 x86_64
Build Date: 14 August 2009 11:20:44AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 24 20:43:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) |-->Input Device "pad"
(**) Option "AIGLX" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/default/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules/drivers,/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x74c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0392:1043:822a nVidia Corporation G73 [GeForce 7600 GS] rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x00008c00/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.13 Thu Jun 25 18:28:54 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-7 $
(II) NVIDIA dlloader X Driver 96.43.13 Thu Jun 25 18:07:12 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.50.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0:
(--) NVIDIA(0): Maxdata (RogenTech) B102035W (CRT-0)
(--) NVIDIA(0): Maxdata (RogenTech) B102035W (CRT-0): 400.0 MHz maximum pixel
(--) NVIDIA(0): clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Mouse0: Device: "/dev/input/event5"
(II) Mouse0: Found 12 mouse buttons
(II) Mouse0: Found x and y relative axes
(II) Mouse0: Found scroll wheel(s)
(II) Mouse0: Found keys
(II) Mouse0: Configuring as mouse
(II) Mouse0: Configuring as keyboard
(**) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Mouse0" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: initialized for relative axes.
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "Tilt" "On"
(**) Option "USB" "On"
(**) stylus: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(EE) Couldn't init device "stylus"
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "Tilt" "On"
(**) Option "USB" "On"
(**) eraser: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(EE) Couldn't init device "eraser"
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) pad: always reports core events
(**) pad device is /dev/input/wacom
(**) pad is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "On"
(**) pad: reading USB link
(**) Option "ButtonsOnly" "on"
(**) pad: buttons only
(**) Option "Button9" "2"
(**) pad: button9 assigned to 2
(**) Option "Button13" "3"
(**) pad: button13 assigned to 3
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "pad" (type: Wacom Pad)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(EE) Couldn't init device "pad"
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(WW) Logitech USB Receiver: device file already in use. Ignoring.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Logitech USB Receiver"
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
Look at this section of the Xorg.0.log file
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Mouse0: Device: "/dev/input/event5"
(II) Mouse0: Found 12 mouse buttons
(II) Mouse0: Found x and y relative axes
(II) Mouse0: Found scroll wheel(s)
(II) Mouse0: Found keys
(II) Mouse0: Configuring as mouse
(II) Mouse0: Configuring as keyboard
(**) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Mouse0" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: initialized for relative axes.
I think this is the problem. Mouse0 is well detected, configured as a mouse, the as a keyboad and to finish, xinput add it as
type: KEYBOARD
. How can I avoid that? Where am I wrong? Do you see anything else in my configuration, or in the log that can help me?
Hoping someone can help me, I've already open the window...
Regards,
KaB

Answer 1

I've got the same hardware and have not yet experienced any issues. However, I am using openSUSE 11.1 Here the xorg config:
# SaX generated X11 config file
# Created on: 2009-08-08T07:17:17-0400.
# Version: 8.1
# Contact: Marcus Schaefer <[email protected]>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection
Section "Module"
Load "dri"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "14"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB Receiver"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 428 255
HorizSync 30-81
Identifier "Monitor[0]"
ModelName "SAMSUNG SYNCMASTER"
Option "DPMS"
Option "PreferredMode" "1440x900"
VendorName "SAM"
VertRefresh 43-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1440x900" 104.58 1440 1520 1672 1904 900 901 904 931
Modeline "1440x900" 85.75 1440 1488 1520 1600 900 903 909 925 +HSync -Vsync
Modeline "1280x960" 105.61 1280 1360 1496 1712 960 961 964 995
Modeline "1280x960" 86.75 1280 1328 1360 1440 960 963 967 988 +HSync -Vsync
Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802
Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800
Modeline "1024x768" 69.71 1024 1080 1184 1344 768 769 772 798
Modeline "1024x768" 69.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627
Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
Modeline "800x600" 44.00 800 848 880 960 600 603 607 622 +HSync -Vsync
Modeline "800x600" 42.11 800 840 920 1040 600 601 604 623
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622
Modeline "1440x900" 106 1440 1520 1672 1904 900 903 909 934 +hsync -vsync
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "ATI Radeon HD 3670"
Driver "radeonhd"
Identifier "Device[0]"
Option "monitor-DVI-I_1/digital" "Monitor[0]"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection