X99a gaming 7 error code 94/95

I'm doing a test run on my setup before I put it in my case with my custom cooling loop, just to check for errors, and I'm getting error 94/95 on the led debugger. All help is appreciated!!!

list system specifications, see >>Posting Guide<<
about the error codes:
0x94 Error: Invalid MAC address
0x95 Error: Invalid load current CMOS option

Similar Messages

  • MSI GTX970 Gaming 4g Win 8.1& Win 10 x64 error code 43

    Good day. I`ve changed my gtx 770 OC from gigabyte to msi 970 gaming 4g. After windows loaded i have exclamation on gtx 970 in device manager - error code 43. Tried clean install new drivers with DDU. Tried all driver from 344.11 to 344.80. Updated bios for my mobo and video. Reinstalled win 8.1 x64  and win 10 tp - same error :( I was thinking that my card is dead and tried to install win 7 x64. And it works perfectly in win 7, no errors.
    Any thoughts how i can make it work in win 8.1 ? (tried to turn of gen3, standby and etc in bios. Hypervisor is not active in win 8.1 too)
    My Pc:
    cpu i4670k
    mobo z87p-d3 (f8 bios)
    ram 2x4gb kingston
    video msi gtx970 gaming 4g ( latest bios)
    psu zalman zm600-gsII
    1 ssd and 3 hdd

    sounds like there is some kind of compatibility issue
    have you tried MSI VGA drivers from smi web for your card?
    else ask your mainboard vendor for bios update
    other options/tips:
    * tell S/N of your card and save and upload its current vbios to check for updates
    * test the card in another computer with Win8.1 OS to verify if will works there

  • MSI Gaming 5 Z97 00 Error Code after Bios Flash

    Was using a USB for bios flash through the uefi bios. I chose ME flash, and it flashed ME then rebooted and then flashed the bios and then it finally rebooted but to a black screen. After a few minutes, I restart the computer and it has an 00 error code now. I removed the graphics card and cleared the CMOS.

    Quote from: HighMans on 05-October-14, 04:04:37
    I flipped the PSU off, I always do that.
    remove the power cord itself from the electrical outlet
    after that proceed with >>Clear CMOS Guide<<
    Quote
    PSU:   
    12v rail Rating of listed PSU: 384W
    CPU: G3258
    Memory: Corsair 8GB XMS
    SSD/ HDD: Seagate 1TB and a PNY SSD
    CPU COOLER: Coolermaster Hyper Plus 212
    Raid Card: N/A
    Sound Card: N/A
    Any Additional hardware plugged into your system: N/A
    OC: (Yes / No) Yes
    Operating System: Windows 8.1
    Quote
    PSU:   
    12v rail Rating of listed PSU: 384W
    PSU brand and exact model?
    Quote
    Memory: Corsair 8GB XMS
    how many memory sticks?
    exact models?
    Quote
    SSD/ HDD: Seagate 1TB and a PNY SSD
    have you tried to disconnect them both?
    Quote
    OC: (Yes / No) Yes
    that's not good idea to flash your BIOS when the system is OCed

  • Can't back-up to ext hard drive (Error code CE-37850-3)

    Since the 2.55 update I haven't been able to back-up my saves to my external hard drive. I used to do this regularly as my online storage is full. Now when I try it I just get the error code CE-37850-3. Have tried unplugging and reconnecting the hard drive. Can anyone help?

    hgwells wrote:
    Leave the drive connected for a while (say 30 minutes), then try again. Am already doing this as I just leave the ext HD connected to the PS4 all the time, then at the end of a gaming session I back-up all the games I've played that day. My PS4 isn't even recognising the ext HD as when I click on USB storage to see what's on there I get the same error message. Never had these problems before this weeks update (2.55)   Thanks for your reply anyway.   

  • Apple Application  Support not found and i have re downloaded itunes 4 times how can i fix this issue error code 2

    Please i need some help here with this issue i am using a windows 7 acer and i would like to be able to listen to music while im gaming is there anyway i can fix this issue i am having i keep getting Error code 2  (windows error 2)

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Z77A-G43 "B4" error code - Logitech G500 Mouse

    Whenever I boot up or restart, the bios hangs at a "B4" error code. Some research shows that it's a USB error. Whenever I unplug the mouse, it starts fine. 
    My BIOS version is 2.40
    Any help would be appreciated.

    Also several release notes in the full release and beta bios of gaming mouse / keyboard compatibility fixes.
    http://www.msi.com/product/mb/Z77A-G43.html#/?div=BIOS
    or
    >>Beta BIOSes<<
    >>Use the MSI HQ Forum USB flasher<<

  • Debug error code 04

    Hi sometimes my board appears that debug error code 04 in debug code led is normal???
    My motherboard is: MSI z87M Gaming
    SO: Windows 8.1
    Tks.
    Jorge

    Quote from: solidsnakefuz on 25-February-14, 10:31:29
    Board: MSI Z87M Gaming
    Bios: Version 1.10
    VGA:   Sapphire 7970 VaporX 3GB
    PSU:   Corsair TX650
    Intel Core i5-4670K
    MEM: G.Skill Sniper DDR3 4x4GB 1866MHz CAS9
    HDD: SSD Samsung 840 250GB
    COOLER: CPU Stock cooler
    OCGenie: 4.0 GHZ
    OS: Windows 8.1 64bit Professional
    I put the system with OCGenie off and reset the system. The system reeboot and debug error code goes to A0.
    But when i shut down the pc and put them on again the erro code goes to 04 again   :(
    I am sorry to intervene. and this should not my place to ask. I experienced the same thing with you. "Debug error code 04". I Foxconn Z77A-S users. so i am looking for a way out with searching on the internet turned out to be the same. This problem occurs after I reinstall windows, before there is no problem. PC will restart itself once the new PC is turned on might take some time (code 04) but after the restart turned into code A0 after the PC is running normally. so each would turn on my PC restarts itself changed so let A0 code. does not matter but it seems strange there.
    Did you already find a way out?
    thank you
    Board: FOXCONN Z77A-S
    VGA: Sapphire HD 6750 1GB VaporX
    PSU: Seasonic X760W
    Intel Core i5-2500K
    MEM: Corsair Vengance 4GB x2 Dual cannel
    HDD: SSD Corsair Force GT 120 and WD Green 3TB
    COOLER: Xigmatek Night Hawk
    OS: Windows 8 Professional

  • Z87 XPower Error Code 00

    I currently have a G3258 and an MSI XPower Z87 motherboard. Anyways, the board boots up, but there is no display, USB power out, etc. The Blu-Ray burner does open and the fans do spin (so do the GPU fans), but that is it. No display.
    What is error code 00?
    Does this mean that the board is carrying an earlier BIOS?
    I've tested the following components on another board:
    - CPU (works)
    - MSI r9 290 Gaming (works - fans spin too)
    - RAM (passed MemTest86+)
    - Power supply is working
    - Sound card is working
    - SSD works
    - Blu-ray burner  opens up and the LED is flashing with both motherboards
    - All fans attached spin
    Also I've done the following
    - Checked all cables to make sure that they were plugged in
    - There are no loose screws or anything that could cause a short
    That leaves me to suspect that the motherboard has an older BIOS? Everything else seems to work.
    How do Z87 boards treat Haswell refresh with older BIOS. Do they give Error Code 00?
    I made a thread earlier about it:
    https://forum-en.msi.com/index.php?topic=184086.0
    The only thing I think that may be worth mentioning is that the RAM is G.Skill.

    Was busy yesterday, but upon closer inspection, there is a second issue and possibly a third.
    One of the caps is dented. It is the cap right beside the 24pin power connector. 
    Edit: The cap is also loose.
    I presume that this is not safe?
    Third issue - note the copper exposed on the traces near the audio area.
    That is copper is it not on the traces?
    There are a few white dots around (the black lacquer has been damaged somewhat), but apart from the audio, nothing else was damaged. 
    The old owner of this board did not take good care of it, it would seem. I'm in shock to be honest - how does one spend so much on a board and treat it like that.

  • PS4 ERROR CODE ( CE-34305-5) BLINKING BLUE LIGHT

    Hey man, thx a lot for this! I was tryin to turn on this ps4 for 1 hour and the same ***** safe modę again and again. This 'trick' with PS button works!

    This error code I now understand is due to the ***** hard disks in these systems failing, my console is rendered useless by this bluntly down to the fact that the Operating system cant launch as it is stored on the HDD,my console is now useless, I cant get through to SONY CUSTOMER SUPPORT, it is rubbish when compared to other countries that have online chat support, I cant backup anything on the disk as it is corrupt so I am spitting my dummy out of the pram and not investing anymore of my hard earned cash into consoles I was massively let down by microsofts XBOX 360 ended up going through 4 of them, and now this lump of shite loaded with cheap partS, I will get a new replacment off PONY eventually and sell it and make a loss because I paid over £400 for my bundle last november to which it has now dropped in price.im going to invest it into a custom built gaming pc that I Have control over what parts go into it.RANT OVER enjoy your day people. in a nutshell if you get this error CE-34305-5  your cheap nasty hard drive that PONY installed has kicked it.

  • Error Code CE-34861-2

    Guys I dont know what to do. i keep getting this error code (CE-34861-2)

    They just updated the site https://status.playstation.com/en-us/ Gaming and SocialAffected Platforms: PlayStation 4Affected Services: You may be experiencing issues related to launching games, applications, and/or social features such as trophies, messaging, or friends list. We appreciate your patience while we address this.Status: Thursday, April 2nd 2015 9:40 am PD

  • What is this error code's on x79 Gd 65 8D (99),(B2),(B4)

    Hello Msi users My names shaaban and i am from turkey years old 24 i am complete my x 79 gaming case almostly, system part list is that
    board x79 a gd 65
    mem, 16 gig gskill cl 9 2133 mhz
    cpu 3930 k
    psu  x1000 platinum
    gpu we are tryied the my friend 6990 i am havent yet now
    ssd 120 gb s 3 corsair f gt
    we are installed the components carefully everythings fine but first time we are pushing the on button system power on well but system post ed us 3 debug code b2 b4 and 99 i find the manuel book and i did see this words "console outpu/input devices/console initiaalization and load option rom (vga, Raid, parallel ports, serial ports......) Whats is this graphic card problem? if it is but we are sucsessfull installed the windows and programs and 2 hours playing battlefield 3 with radeon 6990 average 88 fps on full hd and settings ultra work fine with non anything bios update or program update pure fabrication default board but we are 2 hours end restarting the system, windows 7 normal starting but we are taking the same debug codes 99 b2 and b4...
    ThNK   YOU FOR HELPİNG AND RESPONDİNG, AND SORRY BAD ENGLİSH I MUST FİX MY SPEAKİNG...

    Quote from: Stu on 13-May-12, 23:54:27
    They are not error codes, but checkpoint codes.
    If the system passes POST and boots into Windows, then there isn't an issue. And if you're playing games for several hours without any issues, then there is no problem.
    yes bro i am experiance the minimum 1.5 hour battlefield 3 game the ultra mode fps is wawing 45 to 160 but normal 90 at 6990 strange this codes not error codes allright? okey then my system working normally??

  • Board giving error codes for RAM

    I have a Z87-GD65 GAMING board. I am having an issue with running the RAM in DUAL channel. It will running OK with each stick individually installed, but not together. Error codes I'm getting are a 10, followed by 19, and then 55. With just one stick, code is A0. My RAM is Corsair Vengeance Pro Series Red 8GB (2x4GB) DDR3 1600 MHZ (PC3 12800) Desktop Memory CMY8GX3M2A1600C9R.
    This is on the very first boot after everything was installed. no BIOS changes were made.
    Any help would be appreciated.

    Quote
    I didn't have a chance to look at socket. But, I did notice that the 1st two dimm slots don't work, but 3 and 4 do.
    Classic bent CPU socket pin(s) scenario.
    Quote
    I hear that the LGA 1150 socket pins aren't really easy to bend. I placed the CPU in and clammed down. There wasn't really anything I could have done to mess it up. I'm pretty positive of that.
    Unfortunately, not true at all. They are very fragile. A CPU cooler mounted uneven or that has incorrect torque will also cause this behavior.

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Report generation failed----​error code:-1720​5; Access Denied.

    Hi, All
        i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
        detail:
        An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
    Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
    The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility. 
        error code:-17205; Access Denied.
        locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
        How to fix it?
        Thanks a lot.
    BR

    Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
    CTA, CLA, MTFBWY

  • There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

    I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

    Do a clean (re)install
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    From https://support.mozilla.com/en-US/questions/764376

Maybe you are looking for