XBMC doesn't render properly (looks "corrupted")

Hey guys, I've asked this question over in the XBMC forums, but thought I would ask here too.
When running the XBMC application it looks like this: http://i.imgur.com/cKhng.png (It should look like this). I've also seen it "almost" start up correctly, like this: http://i.imgur.com/BiC2R.jpg
I'm using the xf86-video-ati driver for my AMD A6 APU. Here is the output from glxinfo: https://gist.github.com/4293851 and the output from xbmc.log: https://gist.github.com/4292233
The strange thing is it will sometimes display everything fine. But it only seems to work when I run it a little while after X has started. If I include `exec xbmc` in my xinitrc it will always look like this. However if I just start a window manager (such as dwm) and then wait and start XBMC it will (sometimes) display fine, other times it still renders incorrectly.
Hoping someone might recognize this issue.
Thanks
Last edited by EvanPurkhiser (2012-12-15 12:53:56)

I get the same problem and have for a while, since driver updates. I can get mine to load if I downgrade ati-dri and libgl from 9.x to 8.x versions.

Similar Messages

Arabic text doesn't render properly when export to PDF

Hi
I am having problem with exporting Arabic text to pdf and it doesn't render properly. The whole content render properly expcet the white space; the funny charater has been replaced to white space.
Does any one having that problem?
Note: I have tested with using both Crystal Report Designer XI and Crystal Report 2008 which come out same result.
Thanks,
Yin

Morning Yin,
Did you have any luck with the download? The link I sent you does not need to download using username and password.
Additionally I doubt if your company would know what your username and password is for SAP as you got to request SAP to get one.
here is the link to the registration page.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/new_user_pass/infouser_request.htm]
Register yourself first and then you will receive the username and password for it.
Hope this helps
Regards
Jehanzeb

Website doesn't render properly on an ipad - looks okay on normal desktop computers?

Best wishes everyone!
Rookie at Dreamweaver but have created a website that looks fine on desktops, Apple and Pc but when viewed in pad doesn’t seem to render properly. Site is www.oakridgegroup.co.uk.
Any ideas on what I need to do to fix this.
Thanks,
mmc.13

Some good news for you is that the problem is not just for iPad's but for desktops too. If you make your browser window smaller than your wrapper, you see the same problem. This is good news because it's not a single device/browser issue and relates to the basic code.
The way you have structured the pages will forever give you issues as you have used positioning on almost every element. Couple that with what looks like different style sheets on some pages and you have a recipe for hair-pulling.
Some quick tips for you when creating a basic structure:
Link all pages to one basic stylesheet. This will make it easier to keep things consistent and for you to make site-wide changes. To go one step further, you could also copy any other styles (nivo slider) into that same stylesheet so you end up with one sheet in total. This will also give you a tiny speed increase in load time.
Don't use positioning for layout structure. It will only end badly. Use of floats is far more efficient and easier to keep a consistent structure. This will also play into your hands if you wanted to create an iPad focussed web site.
Don't set heights on every element. You have a height specified on the wrapper which is why there is a huge gap at the bottom of the page when viewing on either desktop or iPad.
Place all scripts either in the <head> section of the page or at the bottom of the page, directly before the </body></html> tags. I personally put them at the bottom.
Ensure all code is correct by running it through the w3c validator. This will keep you going in the right direction. Eg, you are missing the </html> I reference above. It goes at the very end of the code.
Sorry this doesn't answer your question exactly but the issue you see is one I have seen a few times recently from people using designer templates and positioning. Sometimes it's easier and better to re-work the base code.

Unicode doesn't render properly

Hi all,
I have problem with Unicode. Air doesn't render Khmer Unicode
properly, but when I open the file in Safari and Chrome, it works
fine. If I'm not mistaken, Air, Safari and Chrome use Webkit to
render HTML. Why does it work with Safari and Chrome and doesn't
work with Air? Any idea?
Thanks in advanced.
Cheers,

Hi,
Can you please file a bug at http://adobe.com/go/wish?
Thanks.

JSP containing ADF components doesn't render properly after upgrading

The migration seemed to go OK but when I open the JSP, the design view looks very different. It doesn't render any of the objects in the page and it only shows them as rectangular blocks ( like input text) in a tree view.

Hi,
upgrade from which release to which other release ? JSP or JSP with JSF
Frank

Devanagari/Hindi Text Doesn't Render Properly

I was so hoping that HIndi text would render properly with the 3.0 upgrade. Sadly it is still broken.
I encourage folks to report this:
http://www.apple.com/feedback/iphone.html
Ideally it would be great to have a keyboard input method, but it is sort of embarrassing that the iPhone can't render web pages (like www.bbc.co.uk/hindi/) correctly.

Morning Yin,
Did you have any luck with the download? The link I sent you does not need to download using username and password.
Additionally I doubt if your company would know what your username and password is for SAP as you got to request SAP to get one.
here is the link to the registration page.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/new_user_pass/infouser_request.htm]
Register yourself first and then you will receive the username and password for it.
Hope this helps
Regards
Jehanzeb

Overlaid text doesn't render properly in the iPad

Overlaying text on top of already rendered areas causes erratic rendering on the iPad. These are NOT issues on Sarari running on my Windows 7 desktop.
Issue 1 - the overlayed text renders correctly but at the end of the loop doesn't re-render
Issue 2 - the overlayed text renders correctly but doesn't allow the rest of the movie to play.

Morning Yin,
Did you have any luck with the download? The link I sent you does not need to download using username and password.
Additionally I doubt if your company would know what your username and password is for SAP as you got to request SAP to get one.
here is the link to the registration page.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/new_user_pass/infouser_request.htm]
Register yourself first and then you will receive the username and password for it.
Hope this helps
Regards
Jehanzeb

Crop doesn't render properly

Hi,
I just did a project with Adobe Premiere Elemenets 11, and I have issues with the crop effect:
- In the preview panel, the effect seems to work perfectly. The preview corresponds exactly to the settings I applied to the crop effect.
- But after I publish the video (either local file or Youtube, doesn't make a difference, the bottom crop setting is screwed up)
In Adobe preview:
After publishing:
Any clue of what could happen?

stephedi2
We have just gone through this type of matter with another person. He presented floating problems in the export to YouTube. I could not confirm his results.
http://forums.adobe.com/message/5309928
I am not sure what the status of his issue is at the present time.
So let us look at your specific situation.of black borders and floats.
Are you working as NTSC or PAL. It would think PAL.
a. What is your Premiere Elements 11 project preset? Did you set it (File/New/Project) or did you let the program take control to set it. Please look to Edit Menu/Project Settings to determine what project settings are being used by the project.
b. What are the properties of your source media (video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, ). If you do not know, then please try to get a properties readout from the free program named MediaInfo.
http://mediainfo.sourceforge.net/en
I see .mov and .mts files in there. And, it looks like the crop was applied to the .mts on Video 5.
Even though you say that it does not matter what your export is (save to file on hard drive or upload to YouTube), please give the specifics settings and related details for either route that left you with the problem. That would seem critical information in the troubleshooting.
Let us start here and then decide what next.
Please indicate if I have misinterpreted any part of your issue.
Thanks.
ATR

When I open a new window, The redesigned taskbar doesn't render properly

If a link is set to automatically opens in a new window, then the Firefox button/Tab bar don't render correctly.
[http://i23.photobucket.com/albums/b395/Jblsurfer/firefoxproblem.jpg This is a screenshot of my problem. See inside the orange box]

It is the default action in Firefox to open a new window with the home page(s).
A possibility to avoid that is a bookmarks (e.g. on the Bookmarks Toolbar) with the location set to about:blank and use Shift + left-click to open a blank window or set the Home page to about:blank and use a bookmark to open the home page.

Courier Font Doesn't Render Properly

I have the above problem for about 1,5 months.. I changed the Courier fonts in my ~/.fonts/ folder with the ones in Vista but it didn't solve the problem.. No other fonts are being rendered like this.. The problem is only occurs with Courier font..

you are not alone with this problem. It is really annoying, because you see Courier a lot on the web for quotes and code-fields. I haven't noticed this with another font either, but I am not sure if there are others.
I have installed "pacman -S ttf-ms-fonts" and restarted X, so i guess Courier "should" work.
Edit: okay, 'Courier' isn't installed, but 'Courier New' should work. In fact it does in OpenOffice, but doesn't in webpages, which use a StyleSheet like "FONT-FAMILY: Courier, 'Courier New', monospace;". An example is here in the code sections.
Last edited by 3ner (2008-01-22 18:30:16)

I have Firefox 23.0.1. Slidedeck doesn't render properly.

tateinc.com is my website. The home page uses slidedeck. It use to render fine but not anymore. I now have Firefox 23.0.1. I saw online that an updated slidedeck.jquery.js will fix it, which I downloaded, but it did not fix the problem. Please help.

Clear the cache and cookies, if that doesnt work, try to disable hardware acceleration, instructions below.
CACHE AND COOKIES
The first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
DISABLE HARDWARE ACCELERATION
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Flash CS5 movie with 2167 frames doesn't render properly when published

I have a flash animation (.fla) that I am creating in flash professional CS5.
I have not finished development but have hit a snag with completing it, because when the movie has 2166 frames or less, it publishes to swf correctly, but when I add additional frames (2167 or more), upon publishing to swf my 3D animations and text do not display in the published swf file.
I know in the older versions of flash there is a frame limit of 16000 frames, but is there an even smaller frame limit in flash CS5 of 2166 frames or less? Perhaps this limitation is only apparent when using the new features like 3D animation?
Adobe, is there a bug fix for this? Any suggestions?
Thanks

Here's the workaround I used to fix this if anyone experiences a similar problem:
Problem:
When publishing from flash CS5 with actionscript 3.0 to swf, publishing takes a long time and 3D tweens and text do not display in the published movie.
Workaround:
File > Publish Settings
Select the Flash tab
In the script dropdown, change the option from Actionscript 3.0 to Actionscript 2.0
If you have any 3D tweens, a warning will appear - "3D tweens can only be supported in ActionScript 3.0 or higher. 3D properties will be permanently removed from all tweened objects if the current publish settings are changed. There is no undo for this operation."
Click Ok
If you have any TLF text, another warning will appear "TLF text can only be supported in ActionScript 3.0 or higher. TLF text will be permanently converted to classic text if the current publish settings are changed. There is no undo for this operation. Undo history will be cleared."
Click Ok
Any text that was converted to Classic text may have changed in layout & position
review and fix all your text
Save the file.
Publish to swf and test
File > Publish Settings
Select the Flash tab
In the script dropdown, change the option from Actionscript 2.0 back to Actionscript 3.0
Add your 3D tweens back in
Publish to swf and test
If anyone has a better solution I'm still interested to hear it, as my workaround doesn't allow you to use TLF text.

Command button doesn't render properly with customized images in ADF 11g

Hi all,
I have these elements in the .css file:
/** button **/
.AFButtonServerText:alias {
background-color:#daebf2;
color:#000000;
font-size:100%;
font-family:Luxi Sans, Dialog;
vertical-align:middle;
-ora-text-antialias:true;
.AFButtonServerTextDisabled:alias {
background-color:#f5f5e4;
color:#aaaaaa;
font-size:100%;
font-family:Luxi Sans, Dialog;
vertical-align:middle;
-ora-text-antialias:true;
.AFButtonStartIcon:alias {
/*content:url(/skins/images/buttonStart.gif); */
content: url("images/buttonStart.gif");
width:8px;
height:20px;
.AFButtonStartIcon:alias:rtl {
/*content:url(/skins/images/buttonEnd.gif); */
content: url("images/buttonEnd.gif");
width:8px;
height:20px;
.AFButtonEndIcon:alias {
/*content:url(/skins/images/buttonEnd.gif); */
content: url("images/buttonEnd.gif");
width:8px;
height:20px;
.AFButtonEndIcon:alias:rtl {
/*content:url(/skins/images/buttonStart.gif); */
content: url("images/buttonStart.gif");
width:8px;
height:20px;
.AFButtonTopBackgroundIcon:alias {
/*content:url(/skins/images/buttonTop.gif); */
content: url("images/buttonTop.gif");
width:1px;
height:2px;
.AFButtonTopBackgroundIcon:alias:rtl {
/*content:url(/skins/images/buttonTop.gif); */
content: url("images/buttonTop.gif");
width:1px;
height:2px;
.AFButtonBottomBackgroundIcon:alias {
/*content:url(/skins/images/buttonBottom.gif); */
content: url("images/buttonBottom.gif");
width:1px;
height:2px;
.AFButtonBottomBackgroundIcon:alias:rtl {
/*content:url(/skins/images/buttonBottom.gif); */
content: url("images/buttonBottom.gif");
width:1px;
height:2px;
I am expecting to get some round corners in the button, but it fails in 11g. This only happens in ADF 11g, in 10g, it works. I use JDEV 11.1.1.4.0 and <tr:commandButton> in the UI. What have I possibly missed?
Thanks.
Shawn
Edited by: shawn_abc on May 17, 2012 3:52 PM
Edited by: shawn_abc on May 17, 2012 3:56 PM

Hi Frank,
Yes, I was searching in this url previously: http://myfaces.apache.org/trinidad/skin-selectors.html and couldn't find it either. Is there any way to achieve what I intend to do like using af|commandButton?
Thanks,
Shawn

New espn site doesn't render properly - can't see scoreboard at top

The scoreboard ribbon at the top of the screen is obscured (not wide enough to see second line). I'm using Surface Pro on Windows 8.1.

HI rogbert5949,
Please also contact the developer of the site for more information.
*webcompat.com

Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
DELL Windows XP Pro

XBMC doesn't render properly (looks "corrupted")

Similar Messages

Maybe you are looking for