Xbmc+nvidia+vdpau issues [SOLVED]
I've been at this for 5 hours straight now, and i'm back to square one. I've tried xbmc-svn but that one didn't even have "vdpau" listed as an option, so I tried xbmc instead. And yes vdpau is showing up as an option but no matter what I try the screen gets screen/grey/different colors everytime I try to launch a movie using vdpau, tried nvidia and nvidia-beta same issue.
I'm totally stumped, is there a secret/magic setting i've forgotten to use in my xorg?
GPU: 9800GT 512MB
Using HDMI - LCD
780G mobo (internal ati gpu disabled)
I just tried xbmc-live (usb stick) and watching a movie with vdpau results in a grey/green/distorted screen. That worries me a lot, I mean if it's not working on the usb stick then my gpu might be damaged or something?
ISSUE RESOLVED, IT WAS MY GPU, BOUGHT A NEW ONE TODAY
Here's my xorg (using hal dbus nvidia)
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "true"
Option "Xinerama" "0"
Option "NoLogo" "True"
Option "ConnectedMonitor" "DFP"
Option "TripleBuffer" "True"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "SAMSUNG"
HorizSync 15.0 - 46.0
VertRefresh 50.0 - 61.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1920x1080 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by greenfish (2009-09-28 10:51:05)
OK, will give that a run after work this evening. I stand corrected, I did not realize that hte repo version was the same, for some reason I was thinking that it was 340.4x or something. Not to self, do better research. As far as the Xorg :0 -configure, I deleted all of the xorg.conf i could find. (~/xorg.conf, /etc/X11/xorg.conf.d [actually delted the entire /etc/X11 directory] /usr/share/X11/xorg.conf [once again, rm -rfv'd the entire X11 directory) so I was hoping to start with a blank slate, and use the -configure command to give me something to work with. At this point, I want to use the nouveua drivers, as by and large they seemed more reliable than nvidias (I had the repo version on before this whole mess, which may have contributed to getting me into this mess.) In that case, do I still need the nvidia-drm-outputclass.conf? (I don't remember ever seeing that file, even when I first setup this system.) The other two I should be able to locate pretty easily. (Tried to keep backups of stuff as I deleted it, or like you said, the wiki has most stuff that I've needed so far.) Oh, and yeah, the root config file is the result of the -configure command. I knew it was there, but it didn't seem to make a difference, which I chalked up to the configure erroring out.
so, at this point, I want to remove the /root/xorg.conf.new, remove the contents of /etc/X11/xorg.conf.d (preserving the directory itself?) and remove anything other than
10-evdev.conf 10-quirks.conf nvidia-drm-outputclass.conf
, and consider checking the wiki for "virgin" versions of those three. Do I have that correct?
and, lest I forget, I am deeply grateful for your kind advice!! (not used to being on this side of a problem, I am deeply familiar with android, and over on XDA forums, I have helped many people through smartphone issues, kinda humbling to have to ask for help.)
Similar Messages
-
I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue.
I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue. When I go to the settlement site http://www.nvidiasettlement.com , I see that the last date of filing the claim expired which was 14th of March 2011. Is there any option remaining for the solution.
I want to get rid of this irritating overheating problem. Is there any option for replacement of NVIDIA GPU at my own cost even in some authorised service centre?
Regards,
Sujeet
[email protected]
+919266580154Thank you for confirming, that this can in some cases solve the overheating.
And i agree with you, that it is not straight forward, and people has to be carefull -
OTA Update 4.08.605.2 "Rebooting Now..." Issue - SOLVED!
After so many tries and frustration I finally came across the information below and it worked like a charm
http://forums.androidcentral.com/verizon-droid-incredible/134246-second-gb-update-patch-wont-reboot-issue-solved.html
Can't say this will work for everyone, but it worked for me.
Boot into recovery
Press and hold Power, Choose "Restart" option
When screen turns off, press and hold Volume Down and Power
When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
Press the Power button to select “RECOVERY.”
When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
Using the volume button, scroll down to “Wipe cache partition” and select it.
Select "Reboot system now"
You can now wait for the update to show up again, or try one of the methods in the post: For those who want the second GB update/patch to get the update again. It should reboot this time. Beware, it will stay at the Droid Eye screen after reboot for a while (~5 mins), but eventually, it did get installed. Be sure to make a lot of space for it though...The restart option that AmDroid is talking about is not on the regular phone menu. Please read his post carefully. What he is talking about is in an advanced recovery based menu option.
Also, I was on 2.2 and the clear cache set date and time forward trick did not work for me to get the udpate. The clear cache and set date and time forward trick seems to mostly work if you are already on 4.06 software version and want to get the 4.08 software version.
For those on 2.2, patience is warranted! However, if you really cant wait and want to go the 4.06 update manually, you can search Android Forums dot com for manually install gingerbread. And don't worry about the article talking about being rooted. You dont need to be rooted. The instructions will work for a stock phone too. As soon as you do the manual 4.06, the 4.08 update will show up immediately.
Hope this helps! -
hi all ...I would like to add a language that is not available in Photoshop cc2014 .. My computer writes it but backwards .. How can I have this issue solves?
What language are you talking about? You might need to enable Edit/Preferences/Type/Middle Eastern and South Asian for proper display.
-
Compact 2013 Interrupt Issue Solved
As flagged as a comment to the post here, "My iST isn't called", there is a solution in the pipeline (as an update) for ARM interrupt issue. The issue is that interrupts that are close to timer ticks get lost. There is a complete discussion
of this on my blog at:
http://embedded101.com/Blogs/David-Jones/entryid/586/Windows-Embedded-Compact-2013-Interrupt-Issue-Solved
Cheers David Jones
Embedded MVPAs flagged as a comment to the post here, "My iST isn't called", there is a solution in the pipeline (as an update) for ARM interrupt issue. The issue is that interrupts that are close to timer ticks get lost. There is a complete discussion
of this on my blog at:
http://embedded101.com/Blogs/David-Jones/entryid/586/Windows-Embedded-Compact-2013-Interrupt-Issue-Solved
Cheers David Jones
Embedded MVP -
[SOLVED] Ongoing NVIDIA upgrade issues (TV card related?).
[If you think this would be more appropriate in another section, feel free to move it? I'm kind of an nvidia noob, so I thought this might be a good place to start...]
I haven't been able to get a working X session following nvidia/kernel upgrades since last October or so. Everytime I would upgrade the kernel and/or the nvidia driver, my X would fail.
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error)
FATAL server error: no screens found
(This is my "mythtv" box--so there's a hauppauge card installed--I have no idea if that's a factor. I have a LCD monitor connected--as well as an 'old school' CRT television one room over connected.... My other box updated yesterday to the latest kernel/nvidia driver with no problems.)
The problem box has a geforce 8400 video card in it.
Here is my /var/log/xorg.0.log:
[ 100.722]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 100.722] X Protocol Version 11, Revision 0
[ 100.722] Build Operating System: Linux 3.3.1-1-ARCH i686
[ 100.722] Current Operating System: Linux intel-arch 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686
[ 100.722] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
[ 100.723] Build Date: 14 April 2012 07:32:51AM
[ 100.723]
[ 100.723] Current version of pixman: 0.24.4
[ 100.723] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 100.723] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 100.724] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 23 12:06:01 2012
[ 100.724] (==) Using config file: "/etc/X11/xorg.conf"
[ 100.724] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 100.730] (==) ServerLayout "Layout0"
[ 100.730] (**) |-->Screen "Screen0" (0)
[ 100.730] (**) | |-->Monitor "Monitor0"
[ 100.730] (**) | |-->Device "Device0"
[ 100.730] (**) |-->Input Device "Keyboard0"
[ 100.730] (**) |-->Input Device "Mouse0"
[ 100.730] (==) Automatically adding devices
[ 100.731] (==) Automatically enabling devices
[ 100.731] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 100.731] Entry deleted from font path.
[ 100.731] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 100.731] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 100.731] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 100.731] (WW) Disabling Keyboard0
[ 100.731] (WW) Disabling Mouse0
[ 100.731] (II) Loader magic: 0x82215a0
[ 100.731] (II) Module ABI versions:
[ 100.731] X.Org ANSI C Emulation: 0.4
[ 100.731] X.Org Video Driver: 12.0
[ 100.731] X.Org XInput driver : 16.0
[ 100.731] X.Org Server Extension : 6.0
[ 100.731] (--) PCI:*(0:1:0:0) 10de:06e4:1462:1162 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 100.732] (--) PCI: (0:6:1:0) 4444:0803:0070:4000 rev 1, Mem @ 0xf4000000/67108864
[ 100.732] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 100.732] (II) LoadModule: "extmod"
[ 100.732] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 100.732] (II) Module extmod: vendor="X.Org Foundation"
[ 100.732] compiled for 1.12.1, module version = 1.0.0
[ 100.732] Module class: X.Org Server Extension
[ 100.732] ABI class: X.Org Server Extension, version 6.0
[ 100.732] (II) Loading extension MIT-SCREEN-SAVER
[ 100.732] (II) Loading extension XFree86-VidModeExtension
[ 100.732] (II) Loading extension XFree86-DGA
[ 100.732] (II) Loading extension DPMS
[ 100.732] (II) Loading extension XVideo
[ 100.732] (II) Loading extension XVideo-MotionCompensation
[ 100.732] (II) Loading extension X-Resource
[ 100.732] (II) LoadModule: "dbe"
[ 100.732] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 100.732] (II) Module dbe: vendor="X.Org Foundation"
[ 100.732] compiled for 1.12.1, module version = 1.0.0
[ 100.732] Module class: X.Org Server Extension
[ 100.732] ABI class: X.Org Server Extension, version 6.0
[ 100.732] (II) Loading extension DOUBLE-BUFFER
[ 100.732] (II) LoadModule: "glx"
[ 100.732] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 100.752] (II) Module glx: vendor="NVIDIA Corporation"
[ 100.752] compiled for 4.0.2, module version = 1.0.0
[ 100.752] Module class: X.Org Server Extension
[ 100.752] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
[ 100.752] (II) Loading extension GLX
[ 100.752] (II) LoadModule: "record"
[ 100.752] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 100.752] (II) Module record: vendor="X.Org Foundation"
[ 100.752] compiled for 1.12.1, module version = 1.13.0
[ 100.752] Module class: X.Org Server Extension
[ 100.752] ABI class: X.Org Server Extension, version 6.0
[ 100.752] (II) Loading extension RECORD
[ 100.752] (II) LoadModule: "dri"
[ 100.752] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 100.752] (II) Module dri: vendor="X.Org Foundation"
[ 100.752] compiled for 1.12.1, module version = 1.0.0
[ 100.752] ABI class: X.Org Server Extension, version 6.0
[ 100.752] (II) Loading extension XFree86-DRI
[ 100.752] (II) LoadModule: "dri2"
[ 100.752] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 100.752] (II) Module dri2: vendor="X.Org Foundation"
[ 100.752] compiled for 1.12.1, module version = 1.2.0
[ 100.752] ABI class: X.Org Server Extension, version 6.0
[ 100.752] (II) Loading extension DRI2
[ 100.752] (II) LoadModule: "nvidia"
[ 100.753] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 100.753] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 100.753] compiled for 4.0.2, module version = 1.0.0
[ 100.753] Module class: X.Org Video Driver
[ 100.753] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:29:50 PDT 2012
[ 100.753] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 100.753] (--) using VT number 7
[ 100.773] (II) Loading sub module "fb"
[ 100.773] (II) LoadModule: "fb"
[ 100.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 100.774] (II) Module fb: vendor="X.Org Foundation"
[ 100.774] compiled for 1.12.1, module version = 1.0.0
[ 100.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 100.774] (II) Loading sub module "wfb"
[ 100.774] (II) LoadModule: "wfb"
[ 100.774] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 100.774] (II) Module wfb: vendor="X.Org Foundation"
[ 100.774] compiled for 1.12.1, module version = 1.0.0
[ 100.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 100.774] (II) Loading sub module "ramdac"
[ 100.774] (II) LoadModule: "ramdac"
[ 100.774] (II) Module "ramdac" already built-in
[ 100.774] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 100.774] (==) NVIDIA(0): RGB weight 888
[ 100.774] (==) NVIDIA(0): Default visual is TrueColor
[ 100.774] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 100.774] (**) NVIDIA(0): Enabling 2D acceleration
[ 101.451] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 101.451] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 101.451] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 101.451] (EE) NVIDIA(0): README for additional information.
[ 101.451] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 101.451] (II) UnloadModule: "nvidia"
[ 101.451] (II) UnloadSubModule: "wfb"
[ 101.451] (II) UnloadSubModule: "fb"
[ 101.451] (EE) Screen(s) found, but none have a usable configuration.
[ 101.451]
Fatal server error:
[ 101.451] no screens found
[ 101.451]
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 101.451] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 101.451]
[ 101.491] Server terminated with error (1). Closing log file.
Here's the lspci:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:01.0 Multimedia video controller: Internext Compression Inc iTVC15 (CX23415) Video Decoder (rev 01)
06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
I deleted my dual-screen, been-working-for-years xorg.conf file and used nvidia-xconfig to generate a 'clean' one (?):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 295.40 ([email protected]) Thu Apr 5 22:33:07 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Here's a dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
[ 0.000000] BIOS-e820: 000000007feb0000 - 000000007fee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee2000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F10 02/05/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7feb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5800] f5800
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 37d20000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 3752e000 - 377fd698
[ 0.000000] Move RAMDISK from 0000000037d20000 - 0000000037fef697 to 3752e000 - 377fd697
[ 0.000000] ACPI: RSDP 000f7630 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee2180 0507F (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7feb0000 00040
[ 0.000000] ACPI: HPET 7fee7340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee73c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 7fee7480 00560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 7fee79e0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 7fee7240 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 7feee8a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007feb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007feb0
[ 0.000000] On node 0 totalpages: 523839
[ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f652d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s30848 r0 d22400 u1048576
[ 0.000000] pcpu-alloc: s30848 r0 d22400 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4191488 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007feb0)
[ 0.000000] Memory: 2064260k/2095808k available (3773k kernel code, 31096k reserved, 1435k data, 520k init, 1186504k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
[ 0.000000] .data : 0xc04af7a9 - 0xc0616400 (1435 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04af7a9 (3773 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2800.076 MHz processor.
[ 0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.49 BogoMIPS (lpj=9333586)
[ 0.003337] pid_max: default: 32768 minimum: 301
[ 0.006674] Security Framework initialized
[ 0.006678] AppArmor: AppArmor disabled by boot time parameter
[ 0.006689] Mount-cache hash table entries: 512
[ 0.006786] Initializing cgroup subsys cpuacct
[ 0.006789] Initializing cgroup subsys memory
[ 0.006795] Initializing cgroup subsys devices
[ 0.006796] Initializing cgroup subsys freezer
[ 0.006798] Initializing cgroup subsys net_cls
[ 0.006799] Initializing cgroup subsys blkio
[ 0.006820] CPU: Physical Processor ID: 0
[ 0.006822] CPU: Processor Core ID: 0
[ 0.006824] mce: CPU supports 6 MCE banks
[ 0.006829] CPU0: Thermal monitoring enabled (TM2)
[ 0.006831] using mwait in idle threads.
[ 0.007480] ACPI: Core revision 20120111
[ 0.009627] ftrace: allocating 16621 entries in 33 pages
[ 0.013364] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047931] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.066770] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093344] CPU 1 irqstacks, hard=f58ec000 soft=f58ee000
[ 0.093347] Booting Node 0, Processors #1
[ 0.093350] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.106687] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.113331] Brought up 2 CPUs
[ 0.113334] Total of 2 processors activated (11204.98 BogoMIPS).
[ 0.115083] devtmpfs: initialized
[ 0.115083] PM: Registering ACPI NVS region at 7feb0000 (204800 bytes)
[ 0.115083] NET: Registered protocol family 16
[ 0.115083] ACPI: bus type pci registered
[ 0.115083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.115083] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.115083] PCI: Using MMCONFIG for extended config space
[ 0.115083] PCI: Using configuration type 1 for base access
[ 0.116684] bio: create slab <bio-0> at 0
[ 0.116695] ACPI: Added _OSI(Module Device)
[ 0.116695] ACPI: Added _OSI(Processor Device)
[ 0.116695] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116695] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117294] ACPI: EC: Look up EC in DSDT
[ 0.120048] ACPI Warning: Incorrect checksum in table [TAMG] - 0xDD, should be 0xDC (20120111/tbutils-321)
[ 0.120165] ACPI: SSDT 7feee280 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.120301] ACPI: Dynamic OEM Table Load:
[ 0.120304] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.120421] ACPI: SSDT 7feee740 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.120548] ACPI: Dynamic OEM Table Load:
[ 0.120551] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.120670] ACPI: Interpreter enabled
[ 0.120684] ACPI: (supports S0 S3 S4 S5)
[ 0.120698] ACPI: Using IOAPIC for interrupt routing
[ 0.124256] ACPI: No dock devices found.
[ 0.124263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.124306] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.124364] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.124366] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.124368] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.124370] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.124371] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.124373] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
[ 0.124413] PCI host bridge to bus 0000:00
[ 0.124415] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.124417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.124418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.124420] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.124422] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.124424] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
[ 0.124431] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.124467] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.124499] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.124532] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.124569] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.124613] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.124650] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.124694] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.124731] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.124778] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.124793] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.124871] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.124884] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.124942] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.124961] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.125020] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.125041] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.125101] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.125120] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.125180] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.125200] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.125259] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.125280] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.125317] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.125361] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.125398] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.125442] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.125479] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.125526] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.125541] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.125617] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.125670] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.125743] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.125746] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.125749] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[ 0.125788] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.125801] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.125808] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.125815] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.125821] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.125828] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
[ 0.125835] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
[ 0.125874] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.125887] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.125905] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.125933] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.125946] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
[ 0.125953] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
[ 0.125959] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
[ 0.125966] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
[ 0.125973] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
[ 0.125980] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
[ 0.126045] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
[ 0.126054] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.126063] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.126073] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.126080] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.126086] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.126134] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.126137] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.126139] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.126143] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.126176] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.126231] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.126312] pci 0000:03:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 0.126371] pci 0000:03:00.0: PME# supported from D3hot
[ 0.126401] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.126423] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.126436] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
[ 0.126448] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.126461] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.126473] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.126551] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.126563] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.126566] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.126569] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.126622] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.126637] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
[ 0.126672] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.126688] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.126699] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.126759] pci 0000:04:00.0: supports D1 D2
[ 0.126760] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133342] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.133347] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.133352] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.133359] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.133422] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.133441] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.133471] pci 0000:05:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
[ 0.133492] pci 0000:05:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
[ 0.133506] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.133574] pci 0000:05:00.0: supports D1 D2
[ 0.133575] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140007] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.140013] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.140017] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.140024] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.140061] pci 0000:06:01.0: [4444:0803] type 0 class 0x000400
[ 0.140080] pci 0000:06:01.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
[ 0.140185] pci 0000:06:07.0: [104c:8024] type 0 class 0x000c00
[ 0.140208] pci 0000:06:07.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
[ 0.140217] pci 0000:06:07.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
[ 0.140279] pci 0000:06:07.0: supports D1 D2
[ 0.140280] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.140315] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.140320] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.140324] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.140326] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.140328] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.140330] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.140332] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.140334] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.140336] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
[ 0.140356] pci_bus 0000:00: on NUMA node 0
[ 0.140358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.140544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.140585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.140618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.140651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.140755] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.140757] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.140759] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.149260] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.149298] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.149337] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.149374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.149412] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.149449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.149486] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.149523] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.149564] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.149564] vgaarb: loaded
[ 0.149564] vgaarb: bridge control possible 0000:01:00.0
[ 0.149564] PCI: Using ACPI for IRQ routing
[ 0.150832] PCI: pci_cache_line_size set to 64 bytes
[ 0.150913] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.150915] reserve RAM buffer: 000000007feb0000 - 000000007fffffff
[ 0.150997] NetLabel: Initializing
[ 0.150999] NetLabel: domain hash size = 128
[ 0.151000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.151009] NetLabel: unlabeled traffic allowed by default
[ 0.151013] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.151018] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.151022] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.160013] Switching to clocksource hpet
[ 0.165167] pnp: PnP ACPI init
[ 0.165182] ACPI: bus type pnp registered
[ 0.165247] pnp 00:00: [bus 00-3f]
[ 0.165250] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.165252] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.165253] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.165255] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.165257] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.165259] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.165261] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
[ 0.165307] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.165368] pnp 00:01: [io 0x0010-0x001f]
[ 0.165370] pnp 00:01: [io 0x0022-0x003f]
[ 0.165372] pnp 00:01: [io 0x0044-0x004d]
[ 0.165373] pnp 00:01: [io 0x0050-0x005f]
[ 0.165375] pnp 00:01: [io 0x0062-0x0063]
[ 0.165376] pnp 00:01: [io 0x0065-0x006f]
[ 0.165378] pnp 00:01: [io 0x0074-0x007f]
[ 0.165379] pnp 00:01: [io 0x0091-0x0093]
[ 0.165380] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.165382] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.165383] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.165385] pnp 00:01: [io 0x0290-0x029f]
[ 0.165386] pnp 00:01: [io 0x0800-0x0805]
[ 0.165388] pnp 00:01: [io 0x0290-0x0294]
[ 0.165389] pnp 00:01: [io 0x0880-0x088f]
[ 0.165450] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.165452] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.165454] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.165457] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.165458] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.165461] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165471] pnp 00:02: [dma 4]
[ 0.165473] pnp 00:02: [io 0x0000-0x000f]
[ 0.165474] pnp 00:02: [io 0x0080-0x0090]
[ 0.165476] pnp 00:02: [io 0x0094-0x009f]
[ 0.165477] pnp 00:02: [io 0x00c0-0x00df]
[ 0.165503] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.165542] pnp 00:03: [irq 0 disabled]
[ 0.165550] pnp 00:03: [irq 8]
[ 0.165552] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.165580] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.165603] pnp 00:04: [io 0x0070-0x0073]
[ 0.165630] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.165637] pnp 00:05: [io 0x0061]
[ 0.165664] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.165671] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.165676] pnp 00:06: [irq 13]
[ 0.165702] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.165792] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.165794] pnp 00:07: [io 0x03f7]
[ 0.165798] pnp 00:07: [irq 6]
[ 0.165799] pnp 00:07: [dma 2]
[ 0.165836] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.165963] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.165967] pnp 00:08: [irq 4]
[ 0.166019] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.166160] pnp 00:09: [io 0x0378-0x037f]
[ 0.166165] pnp 00:09: [irq 7]
[ 0.166209] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.166303] pnp 00:0a: [io 0x0400-0x04cf]
[ 0.166305] pnp 00:0a: [io 0x04d2-0x04ff]
[ 0.166351] system 00:0a: [io 0x0400-0x04cf] has been reserved
[ 0.166353] system 00:0a: [io 0x04d2-0x04ff] has been reserved
[ 0.166356] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166501] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[ 0.166552] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.166555] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166686] pnp 00:0c: [mem 0x000cdc00-0x000cffff]
[ 0.166688] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.166690] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.166692] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.166693] pnp 00:0c: [mem 0x7feb0000-0x7fefffff]
[ 0.166695] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.166696] pnp 00:0c: [mem 0x00100000-0x7feaffff]
[ 0.166698] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.166700] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[ 0.166701] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[ 0.166703] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.166704] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[ 0.166706] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.166708] pnp 00:0c: [mem 0x000e0000-0x000effff]
[ 0.166769] system 00:0c: [mem 0x000cdc00-0x000cffff] has been reserved
[ 0.166772] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.166774] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.166776] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.166778] system 00:0c: [mem 0x7feb0000-0x7fefffff] could not be reserved
[ 0.166780] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.166782] system 00:0c: [mem 0x00100000-0x7feaffff] could not be reserved
[ 0.166784] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.166786] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.166788] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.166790] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.166792] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.166794] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.166796] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.166799] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.166814] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.166852] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.166856] pnp: PnP ACPI: found 14 devices
[ 0.166857] ACPI: ACPI bus type pnp unregistered
[ 0.203257] PCI: max bus depth: 1 pci_try_num: 2
[ 0.203293] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7ff00000-0x800fffff 64bit pref]
[ 0.203296] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
[ 0.203299] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[ 0.203302] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.203304] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.203307] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.203309] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.203312] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.203314] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.203318] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.203320] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.203324] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff]
[ 0.203338] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref]
[ 0.203343] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.203346] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.203349] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.203353] pci 0000:00:1c.3: bridge window [mem 0x7ff00000-0x800fffff 64bit pref]
[ 0.203358] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.203360] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.203363] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.203366] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.203370] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.203375] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
[ 0.203377] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.203379] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.203383] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.203387] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.203392] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.203396] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203399] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.203416] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.203438] pci 0000:00:1e.0: setting latency timer to 64
[ 0.203441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.203443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.203445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.203447] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.203448] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.203450] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff]
[ 0.203452] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.203454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.203456] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.203458] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.203460] pci_bus 0000:02: resource 1 [mem 0x80100000-0x802fffff]
[ 0.203461] pci_bus 0000:02: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[ 0.203463] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.203465] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.203467] pci_bus 0000:03: resource 2 [mem 0x7ff00000-0x800fffff 64bit pref]
[ 0.203469] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.203471] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.203473] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.203475] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.203476] pci_bus 0000:05: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.203478] pci_bus 0000:05: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.203480] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.203482] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.203484] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.203486] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.203487] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.203489] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.203491] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.203493] pci_bus 0000:06: resource 9 [mem 0x7ff00000-0xfebfffff]
[ 0.203517] NET: Registered protocol family 2
[ 0.203569] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.203733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.204057] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.204215] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.204217] TCP reno registered
[ 0.204219] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204226] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204277] NET: Registered protocol family 1
[ 0.230046] pci 0000:01:00.0: Boot video device
[ 0.230066] PCI: CLS 4 bytes, default 64
[ 0.230114] Unpacking initramfs...
[ 0.281716] Freeing initrd memory: 2880k freed
[ 0.282813] apm: BIOS not found.
[ 0.282997] audit: initializing netlink socket (disabled)
[ 0.283008] type=2000 audit(1335182661.279:1): initialized
[ 0.283290] highmem bounce pool size: 64 pages
[ 0.283294] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.284920] VFS: Disk quotas dquot_6.5.2
[ 0.284969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.285048] msgmni has been set to 1719
[ 0.285189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.285213] io scheduler noop registered
[ 0.285214] io scheduler deadline registered
[ 0.285219] io scheduler cfq registered (default)
[ 0.285324] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.285393] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.285471] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.285550] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.285628] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.285741] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[ 0.285742] vesafb: scrolling: redraw
[ 0.285744] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.285947] vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 2560k, total 2560k
[ 0.305959] Console: switching to colour frame buffer device 160x64
[ 0.325876] fb0: VESA VGA frame buffer device
[ 0.325911] intel_idle: MWAIT substates: 0x22220
[ 0.325912] intel_idle: does not run on family 6 model 23
[ 0.325931] GHES: HEST is not enabled!
[ 0.325942] isapnp: Scanning for PnP cards...
[ 0.637859] isapnp: No Plug & Play device found
[ 0.637909] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.658391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.679122] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.679405] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.713326] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.713338] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 0.963424] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.963556] mousedev: PS/2 mouse device common for all mice
[ 0.963618] rtc_cmos 00:04: RTC can wake from S4
[ 0.963703] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.963724] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.963743] cpuidle: using governor ladder
[ 0.963744] cpuidle: using governor menu
[ 0.963917] TCP cubic registered
[ 0.964022] NET: Registered protocol family 10
[ 0.964388] NET: Registered protocol family 17
[ 0.964392] Registering the dns_resolver key type
[ 0.964404] Using IPI No-Shortcut mode
[ 0.964489] PM: Hibernation image not present or could not be loaded.
[ 0.964493] registered taskstats version 1
[ 0.964920] rtc_cmos 00:04: setting system clock to 2012-04-23 12:04:22 UTC (1335182662)
[ 0.964951] Initializing network drop monitor service
[ 0.965002] Freeing unused kernel memory: 520k freed
[ 0.965195] Write protecting the kernel text: 3776k
[ 0.965213] Write protecting the kernel read-only data: 1108k
[ 0.970549] udevd[37]: starting version 182
[ 0.990063] usbcore: registered new interface driver usbfs
[ 0.990082] usbcore: registered new interface driver hub
[ 0.990287] usbcore: registered new device driver usb
[ 0.990620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.990663] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.990666] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.990683] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.994584] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
[ 0.994599] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.999657] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.004470] hub 1-0:1.0: USB hub found
[ 1.004474] hub 1-0:1.0: 6 ports detected
[ 1.004573] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.004576] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.004583] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.007266] SCSI subsystem initialized
[ 1.008500] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
[ 1.008516] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.008592] libata version 3.00 loaded.
[ 1.009871] ahci 0000:03:00.0: version 3.0
[ 1.016893] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.017108] hub 2-0:1.0: USB hub found
[ 1.017111] hub 2-0:1.0: 6 ports detected
[ 1.017203] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.017206] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.017214] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.017248] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.017363] hub 3-0:1.0: USB hub found
[ 1.017367] hub 3-0:1.0: 2 ports detected
[ 1.017433] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.017436] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.017446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.017472] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.017584] hub 4-0:1.0: USB hub found
[ 1.017587] hub 4-0:1.0: 2 ports detected
[ 1.017652] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.017655] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.017661] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.017681] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.017789] hub 5-0:1.0: USB hub found
[ 1.017792] hub 5-0:1.0: 2 ports detected
[ 1.017858] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.017861] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.017868] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.017888] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.017995] hub 6-0:1.0: USB hub found
[ 1.017998] hub 6-0:1.0: 2 ports detected
[ 1.018064] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.018067] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.018073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.018099] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.018206] hub 7-0:1.0: USB hub found
[ 1.018212] hub 7-0:1.0: 2 ports detected
[ 1.018278] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.018281] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.018288] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.018308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.018482] hub 8-0:1.0: USB hub found
[ 1.018485] hub 8-0:1.0: 2 ports detected
[ 1.018763] ata_piix 0000:00:1f.2: version 2.13
[ 1.018772] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.018804] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.020267] scsi0 : ata_piix
[ 1.020371] scsi1 : ata_piix
[ 1.020819] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.020824] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.020853] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.020893] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.021136] scsi2 : ata_piix
[ 1.021644] scsi3 : ata_piix
[ 1.022040] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[ 1.022044] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[ 1.023372] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.023375] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.023819] scsi4 : ahci
[ 1.023884] scsi5 : ahci
[ 1.023962] ata5: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 19
[ 1.023965] ata6: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 19
[ 1.024034] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.024063] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 1.283352] Refined TSC clocksource calibration: 2800.099 MHz.
[ 1.283357] Switching to clocksource tsc
[ 1.350651] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.350654] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.361316] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.361361] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.586675] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 1.734398] hub 8-2:1.0: USB hub found
[ 1.736342] hub 8-2:1.0: 4 ports detected
[ 1.826727] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.826741] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.826862] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.826878] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.843535] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
[ 1.843661] ata1.01: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 1.843665] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.843832] ata2.01: HPA detected: current 1250261615, native 1250263728
[ 1.843837] ata2.01: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
[ 1.843841] ata2.01: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.845598] ata2.01: configured for UDMA/133
[ 1.856788] ata1.00: configured for UDMA/100
[ 1.863573] ata1.01: configured for UDMA/133
[ 1.865163] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
[ 1.865407] scsi 0:0:1:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 1.865585] scsi 1:0:1:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
[ 1.866092] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.867006] scsi6 : pata_jmicron
[ 1.867093] scsi7 : pata_jmicron
[ 1.867683] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 1.867686] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 1.870208] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.870244] sd 0:0:1:0: [sda] Write Protect is off
[ 1.870247] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.870262] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.870558] sd 1:0:1:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
[ 1.870601] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.870604] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.870620] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.915534] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 1.916012] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.980226] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 1.980824] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 2.011343] usb 8-2.1: new full-speed USB device number 3 using uhci_hcd
[ 2.192148] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.192152] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.192558] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.201802] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input0
[ 2.201846] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input0
[ 2.222475] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input1
[ 2.222611] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input1
[ 2.231760] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.2/input/input2
[ 2.231841] generic-usb 0003:046D:C318.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input2
[ 2.231854] usbcore: registered new interface driver usbhid
[ 2.231856] usbhid: USB HID core driver
[ 3.342855] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.236723] udevd[150]: starting version 182
[ 4.459170] Linux media interface: v0.10
[ 4.475608] Linux video capture interface: v2.00
[ 4.489322] usbcore: registered new interface driver uvcvideo
[ 4.489323] USB Video Class driver (1.1.1)
[ 4.496429] lirc_dev: IR Remote Control driver registered, major 250
[ 4.513782] IR NEC protocol handler initialized
[ 4.522116] bttv: driver version 0.9.19 loaded
[ 4.522119] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 4.600352] IR RC5(x) protocol handler initialized
[ 4.608981] IR RC6 protocol handler initialized
[ 4.630510] IR JVC protocol handler initialized
[ 4.636561] IR Sony protocol handler initialized
[ 4.638418] ivtv: Start initialization, version 1.4.3
[ 4.638462] ivtv0: Initializing card 0
[ 4.638463] ivtv0: Autodetected Hauppauge card (cx23415 based)
[ 4.638549] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 4.644475] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.644481] ACPI: Power Button [PWRB]
[ 4.644534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.644537] ACPI: Power Button [PWRF]
[ 4.658578] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.665780] Marking TSC unstable due to TSC halts in idle
[ 4.666758] ACPI: acpi_idle registered with cpuidle
[ 4.670254] Switching to clocksource hpet
[ 4.678524] Floppy drive(s): fd0 is 1.44M
[ 4.679479] IT8718 SuperIO detected.
[ 4.679633] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.679676] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.693701] FDC 0 is a post-1991 82077
[ 4.694860] tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9950569
[ 4.694863] tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
[ 4.694865] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[ 4.694867] tveeprom 0-0050: audio processor is MSP4448 (idx 27)
[ 4.694869] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[ 4.694871] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
[ 4.694873] ivtv0: Autodetected Hauppauge WinTV PVR-350
[ 4.718730] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 4.729649] ppdev: user-space parallel port driver
[ 4.738786] Linux agpgart interface v0.103
[ 4.820346] IR SANYO protocol handler initialized
[ 4.822452] iTCO_vendor_support: vendor-support=0
[ 4.823062] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.823136] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 4.823465] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.830152] IR MCE Keyboard/mouse protocol handler initialized
[ 4.831105] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.831186] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 4.831566] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf9e18000, 00:24:1d:2a:98:49, XID 1c4000c0 IRQ 46
[ 4.831569] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.831887] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.831956] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 4.832334] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xf9e1a000, 00:1f:d0:81:ab:41, XID 1c4000c0 IRQ 47
[ 4.832337] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.844309] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 4.880508] IR LIRC bridge handler initialized
[ 4.891113] hda_codec: ALC889A: BIOS auto-probing.
[ 4.917236] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.917368] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.917483] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.917595] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.917707] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.917819] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.917933] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.918044] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.108129] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[ 5.167615] i2c-core: driver [msp3400] using legacy suspend method
[ 5.167617] i2c-core: driver [msp3400] using legacy resume method
[ 5.178769] msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
[ 5.178771] msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect
[ 5.203046] nvidia: module license 'NVIDIA' taints kernel.
[ 5.203050] Disabling lock debugging due to kernel taint
[ 5.218687] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.218866] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
[ 5.298045] i2c-core: driver [tuner] using legacy suspend method
[ 5.298047] i2c-core: driver [tuner] using legacy resume method
[ 5.388600] tda9887 0-0043: creating new instance
[ 5.388603] tda9887 0-0043: tda988[5/6/7] found
[ 5.389628] tuner 0-0043: Tuner 74 found with type(s) Radio TV.
[ 5.392437] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[ 5.407684] tuner-simple 0-0061: creating new instance
[ 5.407687] tuner-simple 0-0061: type set to 47 (LG NTSC (TAPE series))
[ 5.421350] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 5.421381] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 5.421421] ivtv0: RegisteredProgress. Sort of...
As I mentioned in the previous update, I unplugged the Hauppauge PVR-350 card and upgraded the kernel, lirc, lirc-utils, nvidia, and nvidia-utils.
I found this thread ( https://bbs.archlinux.org/viewtopic.php?pid=779327 ) which suggested blacklisting nouveau--as it's built-in to the kernel now (?). When I rebooted after blacklisting nouveau, my X started up!!
I thought I'd solved the issue--but when I plugged the PVR-350 back in and rebooted (it's necessary to use the remote control with mythtv), X failed again:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
[ 0.000000] BIOS-e820: 000000007feb0000 - 000000007fee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee2000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F10 02/05/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7feb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5800] f5800
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 37d61000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 3756f000 - 377fd6d1
[ 0.000000] Move RAMDISK from 0000000037d61000 - 0000000037fef6d0 to 3756f000 - 377fd6d0
[ 0.000000] ACPI: RSDP 000f7630 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee2180 0507F (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7feb0000 00040
[ 0.000000] ACPI: HPET 7fee7340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee73c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 7fee7480 00560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 7fee79e0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 7fee7240 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 7feee8a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007feb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007feb0
[ 0.000000] On node 0 totalpages: 523839
[ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f656e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s30848 r0 d22400 u1048576
[ 0.000000] pcpu-alloc: s30848 r0 d22400 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4191488 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007feb0)
[ 0.000000] Memory: 2064520k/2095808k available (3773k kernel code, 30836k reserved, 1435k data, 520k init, 1186504k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
[ 0.000000] .data : 0xc04af7a9 - 0xc0616400 (1435 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04af7a9 (3773 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2800.335 MHz processor.
[ 0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.03 BogoMIPS (lpj=9334450)
[ 0.003337] pid_max: default: 32768 minimum: 301
[ 0.003356] Security Framework initialized
[ 0.003359] AppArmor: AppArmor disabled by boot time parameter
[ 0.003371] Mount-cache hash table entries: 512
[ 0.003468] Initializing cgroup subsys cpuacct
[ 0.003471] Initializing cgroup subsys memory
[ 0.003477] Initializing cgroup subsys devices
[ 0.003478] Initializing cgroup subsys freezer
[ 0.003480] Initializing cgroup subsys net_cls
[ 0.003481] Initializing cgroup subsys blkio
[ 0.003502] CPU: Physical Processor ID: 0
[ 0.003504] CPU: Processor Core ID: 0
[ 0.003506] mce: CPU supports 6 MCE banks
[ 0.003512] CPU0: Thermal monitoring enabled (TM2)
[ 0.003514] using mwait in idle threads.
[ 0.007056] ACPI: Core revision 20120111
[ 0.009209] ftrace: allocating 16621 entries in 33 pages
[ 0.013364] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047518] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.066769] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093344] CPU 1 irqstacks, hard=f58ec000 soft=f58ee000
[ 0.093347] Booting Node 0, Processors #1
[ 0.093350] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.106687] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.113331] Brought up 2 CPUs
[ 0.113334] Total of 2 processors activated (11205.06 BogoMIPS).
[ 0.115084] devtmpfs: initialized
[ 0.115084] PM: Registering ACPI NVS region at 7feb0000 (204800 bytes)
[ 0.115084] NET: Registered protocol family 16
[ 0.115084] ACPI: bus type pci registered
[ 0.115084] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.115084] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.115084] PCI: Using MMCONFIG for extended config space
[ 0.115084] PCI: Using configuration type 1 for base access
[ 0.116684] bio: create slab <bio-0> at 0
[ 0.116695] ACPI: Added _OSI(Module Device)
[ 0.116695] ACPI: Added _OSI(Processor Device)
[ 0.116695] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116695] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117294] ACPI: EC: Look up EC in DSDT
[ 0.120049] ACPI Warning: Incorrect checksum in table [TAMG] - 0x54, should be 0x53 (20120111/tbutils-321)
[ 0.120165] ACPI: SSDT 7feee280 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.120301] ACPI: Dynamic OEM Table Load:
[ 0.120304] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.120421] ACPI: SSDT 7feee740 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.120549] ACPI: Dynamic OEM Table Load:
[ 0.120551] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.120670] ACPI: Interpreter enabled
[ 0.120684] ACPI: (supports S0 S3 S4 S5)
[ 0.120698] ACPI: Using IOAPIC for interrupt routing
[ 0.124257] ACPI: No dock devices found.
[ 0.124263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.124307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.124364] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.124366] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.124368] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.124370] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.124372] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.124374] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
[ 0.124414] PCI host bridge to bus 0000:00
[ 0.124416] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.124417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.124419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.124421] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.124423] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.124424] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
[ 0.124432] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.124468] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.124500] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.124533] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.124570] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.124615] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.124652] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.124696] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.124733] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.124780] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.124795] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.124874] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.124887] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.124945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.124964] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.125023] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.125045] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.125104] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.125124] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.125183] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.125203] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.125262] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.125284] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.125320] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.125365] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.125401] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.125446] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.125482] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.125530] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.125545] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.125621] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.125675] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.125747] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.125750] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.125753] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[ 0.125793] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.125806] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.125813] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.125820] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.125827] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.125833] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
[ 0.125840] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
[ 0.125880] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.125893] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.125911] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.125939] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.125952] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
[ 0.125959] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
[ 0.125965] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
[ 0.125972] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
[ 0.125979] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
[ 0.125985] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
[ 0.126051] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
[ 0.126060] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.126070] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.126079] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.126086] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.126093] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.126141] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.126143] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.126146] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.126149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.126182] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.126238] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.126319] pci 0000:03:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 0.126378] pci 0000:03:00.0: PME# supported from D3hot
[ 0.126407] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.126430] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.126442] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
[ 0.126455] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.126467] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.126480] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.126557] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.126569] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.126572] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.126575] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.126628] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.126643] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
[ 0.126677] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.126693] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.126705] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.126764] pci 0000:04:00.0: supports D1 D2
[ 0.126766] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133342] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.133348] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.133352] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.133359] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.133422] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.133440] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.133470] pci 0000:05:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
[ 0.133491] pci 0000:05:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
[ 0.133505] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.133572] pci 0000:05:00.0: supports D1 D2
[ 0.133574] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140007] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.140013] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.140018] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.140024] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.140061] pci 0000:06:01.0: [4444:0803] type 0 class 0x000400
[ 0.140081] pci 0000:06:01.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
[ 0.140186] pci 0000:06:07.0: [104c:8024] type 0 class 0x000c00
[ 0.140208] pci 0000:06:07.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
[ 0.140217] pci 0000:06:07.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
[ 0.140279] pci 0000:06:07.0: supports D1 D2
[ 0.140281] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.140315] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.140320] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.140325] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.140327] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.140329] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.140331] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.140333] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.140334] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.140336] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
[ 0.140356] pci_bus 0000:00: on NUMA node 0
[ 0.140359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.140544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.140585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.140618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.140651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.140755] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.140757] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.140759] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.149257] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.149296] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.149334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.149372] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.149409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.149447] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.149484] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.149521] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.149562] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.149562] vgaarb: loaded
[ 0.149562] vgaarb: bridge control possible 0000:01:00.0
[ 0.149562] PCI: Using ACPI for IRQ routing
[ 0.150838] PCI: pci_cache_line_size set to 64 bytes
[ 0.150920] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.150922] reserve RAM buffer: 000000007feb0000 - 000000007fffffff
[ 0.151005] NetLabel: Initializing
[ 0.151006] NetLabel: domain hash size = 128
[ 0.151007] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.151016] NetLabel: unlabeled traffic allowed by default
[ 0.151020] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.151025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.151029] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.160013] Switching to clocksource hpet
[ 0.165171] pnp: PnP ACPI init
[ 0.165185] ACPI: bus type pnp registered
[ 0.165252] pnp 00:00: [bus 00-3f]
[ 0.165254] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.165256] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.165257] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.165259] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.165261] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.165263] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.165265] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
[ 0.165311] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.165373] pnp 00:01: [io 0x0010-0x001f]
[ 0.165375] pnp 00:01: [io 0x0022-0x003f]
[ 0.165376] pnp 00:01: [io 0x0044-0x004d]
[ 0.165378] pnp 00:01: [io 0x0050-0x005f]
[ 0.165379] pnp 00:01: [io 0x0062-0x0063]
[ 0.165381] pnp 00:01: [io 0x0065-0x006f]
[ 0.165382] pnp 00:01: [io 0x0074-0x007f]
[ 0.165383] pnp 00:01: [io 0x0091-0x0093]
[ 0.165385] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.165386] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.165388] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.165390] pnp 00:01: [io 0x0290-0x029f]
[ 0.165391] pnp 00:01: [io 0x0800-0x0805]
[ 0.165393] pnp 00:01: [io 0x0290-0x0294]
[ 0.165394] pnp 00:01: [io 0x0880-0x088f]
[ 0.165456] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.165458] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.165460] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.165462] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.165464] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.165467] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165476] pnp 00:02: [dma 4]
[ 0.165478] pnp 00:02: [io 0x0000-0x000f]
[ 0.165480] pnp 00:02: [io 0x0080-0x0090]
[ 0.165481] pnp 00:02: [io 0x0094-0x009f]
[ 0.165483] pnp 00:02: [io 0x00c0-0x00df]
[ 0.165508] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.165547] pnp 00:03: [irq 0 disabled]
[ 0.165555] pnp 00:03: [irq 8]
[ 0.165557] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.165585] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.165608] pnp 00:04: [io 0x0070-0x0073]
[ 0.165635] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.165642] pnp 00:05: [io 0x0061]
[ 0.165669] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.165677] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.165681] pnp 00:06: [irq 13]
[ 0.165707] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.165798] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.165799] pnp 00:07: [io 0x03f7]
[ 0.165804] pnp 00:07: [irq 6]
[ 0.165805] pnp 00:07: [dma 2]
[ 0.165842] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.165968] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.165973] pnp 00:08: [irq 4]
[ 0.166025] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.166167] pnp 00:09: [io 0x0378-0x037f]
[ 0.166171] pnp 00:09: [irq 7]
[ 0.166215] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.166310] pnp 00:0a: [io 0x0400-0x04cf]
[ 0.166311] pnp 00:0a: [io 0x04d2-0x04ff]
[ 0.166357] system 00:0a: [io 0x0400-0x04cf] has been reserved
[ 0.166359] system 00:0a: [io 0x04d2-0x04ff] has been reserved
[ 0.166362] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166508] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[ 0.166559] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.166561] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166692] pnp 00:0c: [mem 0x000cdc00-0x000cffff]
[ 0.166694] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.166696] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.166698] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.166699] pnp 00:0c: [mem 0x7feb0000-0x7fefffff]
[ 0.166701] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.166702] pnp 00:0c: [mem 0x00100000-0x7feaffff]
[ 0.166704] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.166705] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[ 0.166707] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[ 0.166709] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.166710] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[ 0.166712] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.166713] pnp 00:0c: [mem 0x000e0000-0x000effff]
[ 0.166775] system 00:0c: [mem 0x000cdc00-0x000cffff] has been reserved
[ 0.166777] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.166779] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.166781] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.166783] system 00:0c: [mem 0x7feb0000-0x7fefffff] could not be reserved
[ 0.166785] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.166787] system 00:0c: [mem 0x00100000-0x7feaffff] could not be reserved
[ 0.166790] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.166792] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.166794] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.166796] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.166798] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.166800] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.166802] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.166804] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.166819] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.166857] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.166862] pnp: PnP ACPI: found 14 devices
[ 0.166863] ACPI: ACPI bus type pnp unregistered
[ 0.203267] PCI: max bus depth: 1 pci_try_num: 2
[ 0.203303] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7ff00000-0x800fffff 64bit pref]
[ 0.203306] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
[ 0.203309] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[ 0.203311] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.203314] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.203316] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.203319] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.203321] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.203324] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.203338] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.203340] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.203344] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff]
[ 0.203348] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref]
[ 0.203353] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.203355] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.203359] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.203362] pci 0000:00:1c.3: bridge window [mem 0x7ff00000-0x800fffff 64bit pref]
[ 0.203368] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.203370] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.203372] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.203376] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.203379] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.203385] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
[ 0.203386] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.203389] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.203393] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.203396] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.203401] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.203405] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203409] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.203426] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.203447] pci 0000:00:1e.0: setting latency timer to 64
[ 0.203451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.203452] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.203454] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.203456] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.203458] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.203460] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff]
[ 0.203462] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.203463] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.203465] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.203467] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.203469] pci_bus 0000:02: resource 1 [mem 0x80100000-0x802fffff]
[ 0.203471] pci_bus 0000:02: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[ 0.203473] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.203475] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.203477] pci_bus 0000:03: resource 2 [mem 0x7ff00000-0x800fffff 64bit pref]
[ 0.203479] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.203480] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.203482] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.203484] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.203486] pci_bus 0000:05: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.203488] pci_bus 0000:05: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.203490] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.203492] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.203493] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.203495] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.203497] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.203499] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.203501] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.203502] pci_bus 0000:06: resource 9 [mem 0x7ff00000-0xfebfffff]
[ 0.203527] NET: Registered protocol family 2
[ 0.203579] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.203743] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.204067] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.204228] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.204230] TCP reno registered
[ 0.204232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204239] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204289] NET: Registered protocol family 1
[ 0.230047] pci 0000:01:00.0: Boot video device
[ 0.230067] PCI: CLS 4 bytes, default 64
[ 0.230115] Unpacking initramfs...
[ 0.265087] Freeing initrd memory: 2620k freed
[ 0.266068] apm: BIOS not found.
[ 0.266288] audit: initializing netlink socket (disabled)
[ 0.266299] type=2000 audit(1335262531.263:1): initialized
[ 0.266584] highmem bounce pool size: 64 pages
[ 0.266587] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.268217] VFS: Disk quotas dquot_6.5.2
[ 0.268265] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.268344] msgmni has been set to 1719
[ 0.268484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.268509] io scheduler noop registered
[ 0.268510] io scheduler deadline registered
[ 0.268515] io scheduler cfq registered (default)
[ 0.268621] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.268690] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.268767] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.268848] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.268925] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.269038] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[ 0.269040] vesafb: scrolling: redraw
[ 0.269042] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.269245] vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 2560k, total 2560k
[ 0.289257] Console: switching to colour frame buffer device 160x64
[ 0.309184] fb0: VESA VGA frame buffer device
[ 0.309220] intel_idle: MWAIT substates: 0x22220
[ 0.309221] intel_idle: does not run on family 6 model 23
[ 0.309239] GHES: HEST is not enabled!
[ 0.309250] isapnp: Scanning for PnP cards...
[ 0.621201] isapnp: No Plug & Play device found
[ 0.621251] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.641735] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.662470] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.662752] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.696011] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.696012] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 0.943424] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.943556] mousedev: PS/2 mouse device common for all mice
[ 0.943618] rtc_cmos 00:04: RTC can wake from S4
[ 0.943703] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.943724] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.943743] cpuidle: using governor ladder
[ 0.943744] cpuidle: using governor menu
[ 0.943914] TCP cubic registered
[ 0.944019] NET: Registered protocol family 10
[ 0.944386] NET: Registered protocol family 17
[ 0.944389] Registering the dns_resolver key type
[ 0.944402] Using IPI No-Shortcut mode
[ 0.944484] PM: Hibernation image not present or could not be loaded.
[ 0.944488] registered taskstats version 1
[ 0.944912] rtc_cmos 00:04: setting system clock to 2012-04-24 10:15:32 UTC (1335262532)
[ 0.944944] Initializing network drop monitor service
[ 0.944995] Freeing unused kernel memory: 520k freed
[ 0.945188] Write protecting the kernel text: 3776k
[ 0.945206] Write protecting the kernel read-only data: 1108k
[ 0.950321] udevd[37]: starting version 181
[ 0.975067] usbcore: registered new interface driver usbfs
[ 0.975086] usbcore: registered new interface driver hub
[ 0.975403] usbcore: registered new device driver usb
[ 0.976311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.976358] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.976362] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.976381] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.977405] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.980290] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
[ 0.980307] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.981979] SCSI subsystem initialized
[ 0.987728] libata version 3.00 loaded.
[ 0.990179] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.991541] ahci 0000:03:00.0: version 3.0
[ 0.991704] hub 1-0:1.0: USB hub found
[ 0.991708] hub 1-0:1.0: 6 ports detected
[ 0.991829] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.991832] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.991839] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 0.991875] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.992004] hub 2-0:1.0: USB hub found
[ 0.992008] hub 2-0:1.0: 2 ports detected
[ 0.992104] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.992107] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.992113] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 0.992140] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.992298] hub 3-0:1.0: USB hub found
[ 0.992301] hub 3-0:1.0: 2 ports detected
[ 0.992395] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.992398] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.992404] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 0.992424] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 0.992562] hub 4-0:1.0: USB hub found
[ 0.992565] hub 4-0:1.0: 2 ports detected
[ 0.992630] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.992632] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.992638] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.992666] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.992779] hub 5-0:1.0: USB hub found
[ 0.992782] hub 5-0:1.0: 2 ports detected
[ 0.992997] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.993000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.993006] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.993032] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.993178] hub 6-0:1.0: USB hub found
[ 0.993181] hub 6-0:1.0: 2 ports detected
[ 0.993244] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.993247] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.993253] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.993272] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.993393] hub 7-0:1.0: USB hub found
[ 0.993396] hub 7-0:1.0: 2 ports detected
[ 0.993484] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 0.993516] pata_acpi 0000:00:1f.5: setting latency timer to 64
[ 0.993552] ata_piix 0000:00:1f.2: version 2.13
[ 0.993561] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.993587] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.994010] scsi0 : ata_piix
[ 0.994209] scsi1 : ata_piix
[ 0.994687] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.994692] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.994722] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.994764] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.995109] scsi2 : ata_piix
[ 0.995998] scsi3 : ata_piix
[ 0.996404] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[ 0.996408] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[ 0.996449] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.996452] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.996459] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 1.000369] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
[ 1.000375] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.003374] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.003377] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.003714] scsi4 : ahci
[ 1.003787] scsi5 : ahci
[ 1.003874] ata5: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 19
[ 1.003877] ata6: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 19
[ 1.003896] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.003923] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 1.010024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.010224] hub 8-0:1.0: USB hub found
[ 1.010228] hub 8-0:1.0: 6 ports detected
[ 1.266680] Refined TSC clocksource calibration: 2800.098 MHz.
[ 1.266686] Switching to clocksource tsc
[ 1.330673] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.330675] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.330708] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.341360] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.573349] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 1.720359] hub 7-2:1.0: USB hub found
[ 1.722307] hub 7-2:1.0: 4 ports detected
[ 1.786726] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.786740] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.796725] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.796738] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.807549] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
[ 1.816278] ata1.01: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 1.816282] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.826793] ata1.00: configured for UDMA/100
[ 1.834352] ata1.01: configured for UDMA/133
[ 1.835903] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
[ 1.836204] scsi 0:0:1:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 1.837381] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.837417] sd 0:0:1:0: [sda] Write Protect is off
[ 1.837419] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.837435] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.842977] ata2.01: HPA detected: current 1250261615, native 1250263728
[ 1.842984] ata2.01: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
[ 1.842988] ata2.01: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.846979] ata2.01: configured for UDMA/133
[ 1.847098] scsi 1:0:1:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
[ 1.847319] sd 1:0:1:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
[ 1.847357] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.847360] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.847382] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.879393] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 1.879836] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.959783] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 1.960479] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.960917] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.962994] scsi6 : pata_jmicron
[ 1.963298] scsi7 : pata_jmicron
[ 1.963868] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 1.963871] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 1.964182] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.964185] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.965513] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.998314] usb 7-2.1: new full-speed USB device number 3 using uhci_hcd
[ 2.184767] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.0/input/input0
[ 2.184815] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input0
[ 2.202436] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.1/input/input1
[ 2.202537] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input1
[ 2.210716] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.2/input/input2
[ 2.210787] generic-usb 0003:046D:C318.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input2
[ 2.210801] usbcore: registered new interface driver usbhid
[ 2.210802] usbhid: USB HID core driver
[ 3.022683] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.658594] udevd[149]: starting version 181
[ 3.749111] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.749117] ACPI: Power Button [PWRB]
[ 3.749172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.749175] ACPI: Power Button [PWRF]
[ 3.847032] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.863476] Linux media interface: v0.10
[ 3.864344] Marking TSC unstable due to TSC halts in idle
[ 3.865784] IT8718 SuperIO detected.
[ 3.865831] ACPI: acpi_idle registered with cpuidle
[ 3.866042] parport_pc 00:09: reported by Plug and Play ACPI
[ 3.866083] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.866482] Switching to clocksource hpet
[ 3.898275] iTCO_vendor_support: vendor-support=0
[ 3.898849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.898919] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 3.898972] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.917356] Linux agpgart interface v0.103
[ 3.970494] Floppy drive(s): fd0 is 1.44M
[ 3.971382] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.971469] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 3.973433] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf8950000, 00:24:1d:2a:98:49, XID 1c4000c0 IRQ 45
[ 3.973436] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 3.973494] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.973569] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 3.974018] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xf8998000, 00:1f:d0:81:ab:41, XID 1c4000c0 IRQ 46
[ 3.974020] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 3.976502] Linux video capture interface: v2.00
[ 3.976567] ppdev: user-space parallel port driver
[ 3.986986] FDC 0 is a post-1991 82077
[ 4.092911] usbcore: registered new interface driver uvcvideo
[ 4.092913] USB Video Class driver (1.1.1)
[ 4.093407] firewire_ohci: Added fw-ohci device 0000:06:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 4.117496] lirc_dev: IR Remote Control driver registered, major 249
[ 4.123010] nvidia: module license 'NVIDIA' taints kernel.
[ 4.123013] Disabling lock debugging due to kernel taint
[ 4.139426] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.139793] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
[ 4.141376] bttv: driver version 0.9.19 loaded
[ 4.141378] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 4.141895] IR NEC protocol handler initialized
[ 4.158820] IR RC5(x) protocol handler initialized
[ 4.161235] ivtv: Start initialization, version 1.4.3
[ 4.161283] ivtv0: Initializing card 0
[ 4.161284] ivtv0: Autodetected Hauppauge card (cx23415 based)
[ 4.162012] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 4.166021] IR RC6 protocol handler initialized
[ 4.211259] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 4.211692] IR JVC protocol handler initialized
[ 4.220218] tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9950569
[ 4.220220] tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
[ 4.220223] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 4.220224] tveeprom 1-0050: audio processor is MSP4448 (idx 27)
[ 4.220226] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[ 4.220228] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[ 4.220230] ivtv0: Autodetected Hauppauge WinTV PVR-350
[ 4.301205] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.327025] IR Sony protocol handler initialized
[ 4.352604] IR SANYO protocol handler initialized
[ 4.353105] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 4.361735] hda_codec: ALC889A: BIOS auto-probing.
[ 4.377224] IR MCE Keyboard/mouse protocol handler initialized
[ 4.379125] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.379251] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.379362] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.379473] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.379583] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.379693] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.379803] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.379913] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.433935] IR LIRC bridge handler initialized
[ 4.593456] firewire_core: created device fw0: GUID 00427c790000241d, S400
[ 4.605356] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[ 4.847635] i2c-core: driver [msp3400] using legacy suspend method
[ 4.847637] i2c-core: driver [msp3400] using legacy resume method
[ 4.858881] msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
[ 4.858883] msp3400 1-0040: msp3400 supports radio, mode is autodetect and autoselect
[ 4.892295] i2c-core: driver [tuner] using legacy suspend method
[ 4.892297] i2c-core: driver [tuner] using legacy resume method
[ 4.914640] tda9887 1-0043: creating new instance
[ 4.914642] tda9887 1-0043: tda988[5/6/7] found
[ 4.915701] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[ 4.916868] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 4.918126] lirc_i2c: chip found @ 0x18 (Hauppauge IR)
[ 4.918199] i2c ir driver 1-0018: lirc_dev: driver lirc_i2c registered at minor = 0
[ 4.924857] tuner-simple 1-0061: creating new instance
[ 4.924860] tuner-simple 1-0061: type set to 47 (LG NTSC (TAPE series))
[ 4.938880] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 4.938913] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 4.938944] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 4.938975] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 4.939009] ivtv0: Registered device radio0 for encoder radio
[ 4.939040] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[ 4.939072] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[ 4.939101] ivtv0: Registered device vbi16 for decoder VOUT
[ 4.939131] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[ 4.939133] ivtv0: Initialized card: Hauppauge WinTV PVR-350
[ 4.939147] ivtv: End initialization
[ 5.588685] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 5.605080] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[ 5.803694] ivtv0: Encoder revision: 0x02060039
[ 5.803817] ivtv0: Decoder revision: 0x02020023
[ 5.887242] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[ 6.536711] EXT4-fs (sda6): re-mounted. Opts: user_xattr
[ 6.698002] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
[ 6.698239] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 6.747502] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 6.748386] SGI XFS Quota Management subsystem
[ 6.749002] XFS (sdb11): Mounting Filesystem
[ 6.859760] XFS (sdb11): Ending clean mount
[ 6.874309] EXT4-fs (sdb12): mounting ext3 file system using the ext4 subsystem
[ 6.907592] EXT4-fs (sdb12): warning: maximal mount count reached, running e2fsck is recommended
[ 6.908028] EXT4-fs (sdb12): mounted filesystem with ordered data mode. Opts: (null)
[ 6.952816] EXT4-fs (sdb8): mounting ext3 file system using the ext4 subsystem
[ 6.968115] EXT4-fs (sdb8): warning: maximal mount count reached, running e2fsck is recommended
[ 6.968383] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[ 7.039094] EXT4-fs (sdb9): mounting ext3 file system using the ext4 subsystem
[ 7.054659] EXT4-fs (sdb9): warning: maximal mount count reached, running e2fsck is recommended
[ 7.054942] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null)
[ 7.066008] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 7.077812] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 7.078217] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 7.089318] Adding 2096444k swap on /dev/sda5. Priority:-1 extents:1 across:2096444k
[ 8.551413] r8169 0000:04:00.0: eth0: link down
[ 8.551420] r8169 0000:04:00.0: eth0: link down
[ 8.551554] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.165331] r8169 0000:04:00.0: eth0: link up
[ 10.165539] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.243339] eth0: no IPv6 routers present
[ 124.829802] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
[ 124.831186] NVRM: RmInitAdapter failed! (0x26:0xffffffff:1170)
[ 124.831192] NVRM: rm_init_adapter(0) failed
[ 125.506419] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
[ 125.507795] NVRM: RmInitAdapter failed! (0x26:0xffffffff:1170)
[ 125.507801] NVRM: rm_init_adapter(0) failed
Xorg.0.log:
[ 123.542]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 123.542] X Protocol Version 11, Revision 0
[ 123.542] Build Operating System: Linux 3.2.2-1-ARCH i686
[ 123.542] Current Operating System: Linux intel-arch 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686
[ 123.542] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
[ 123.543] Build Date: 29 January 2012 03:41:53PM
[ 123.543]
[ 123.543] Current version of pixman: 0.24.4
[ 123.543] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 123.543] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 123.544] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 24 10:17:35 2012
[ 123.544] (==) Using config file: "/etc/X11/xorg.conf"
[ 123.544] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 123.545] (==) ServerLayout "Layout0"
[ 123.545] (**) |-->Screen "Screen0" (0)
[ 123.545] (**) | |-->Monitor "Monitor0"
[ 123.546] (**) | |-->Device "Device0"
[ 123.546] (**) |-->Screen "Screen1" (1)
[ 123.546] (**) | |-->Monitor "Monitor1"
[ 123.546] (**) | |-->Device "Device1"
[ 123.546] (**) |-->Input Device "Keyboard0"
[ 123.546] (**) |-->Input Device "Mouse0"
[ 123.546] (**) Option "Xinerama" "0"
[ 123.546] (==) Automatically adding devices
[ 123.546] (==) Automatically enabling devices
[ 123.555] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 123.555] Entry deleted from font path.
[ 123.555] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 123.555] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 123.555] (**) Extension "Composite" is enabled
[ 123.555] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 123.555] (WW) Disabling Keyboard0
[ 123.555] (WW) Disabling Mouse0
[ 123.555] (II) Loader magic: 0x8228580
[ 123.555] (II) Module ABI versions:
[ 123.555] X.Org ANSI C Emulation: 0.4
[ 123.555] X.Org Video Driver: 11.0
[ 123.555] X.Org XInput driver : 13.0
[ 123.555] X.Org Server Extension : 6.0
[ 123.556] (--) PCI:*(0:1:0:0) 10de:06e4:1462:1162 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 123.556] (--) PCI: (0:6:1:0) 4444:0803:0070:4000 rev 1, Mem @ 0xf4000000/67108864
[ 123.556] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 123.556] (II) LoadModule: "extmod"
[ 123.588] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 123.593] (II) Module extmod: vendor="X.Org Foundation"
[ 123.593] compiled for 1.11.4, module version = 1.0.0
[ 123.593] Module class: X.Org Server Extension
[ 123.593] ABI class: X.Org Server Extension, version 6.0
[ 123.593] (II) Loading extension MIT-SCREEN-SAVER
[ 123.593] (II) Loading extension XFree86-VidModeExtension
[ 123.593] (II) Loading extension XFree86-DGA
[ 123.593] (II) Loading extension DPMS
[ 123.593] (II) Loading extension XVideo
[ 123.593] (II) Loading extension XVideo-MotionCompensation
[ 123.593] (II) Loading extension X-Resource
[ 123.593] (II) LoadModule: "dbe"
[ 123.593] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 123.601] (II) Module dbe: vendor="X.Org Foundation"
[ 123.601] compiled for 1.11.4, module version = 1.0.0
[ 123.601] Module class: X.Org Server Extension
[ 123.601] ABI class: X.Org Server Extension, version 6.0
[ 123.601] (II) Loading extension DOUBLE-BUFFER
[ 123.601] (II) LoadModule: "glx"
[ 123.601] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 123.651] (II) Module glx: vendor="NVIDIA Corporation"
[ 123.651] compiled for 4.0.2, module version = 1.0.0
[ 123.651] Module class: X.Org Server Extension
[ 123.651] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
[ 123.651] (II) Loading extension GLX
[ 123.651] (II) LoadModule: "record"
[ 123.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 123.652] (II) Module record: vendor="X.Org Foundation"
[ 123.652] compiled for 1.11.4, module version = 1.13.0
[ 123.652] Module class: X.Org Server Extension
[ 123.652] ABI class: X.Org Server Extension, version 6.0
[ 123.652] (II) Loading extension RECORD
[ 123.652] (II) LoadModule: "dri"
[ 123.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 123.663] (II) Module dri: vendor="X.Org Foundation"
[ 123.663] compiled for 1.11.4, module version = 1.0.0
[ 123.663] ABI class: X.Org Server Extension, version 6.0
[ 123.663] (II) Loading extension XFree86-DRI
[ 123.663] (II) LoadModule: "dri2"
[ 123.663] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 123.664] (II) Module dri2: vendor="X.Org Foundation"
[ 123.664] compiled for 1.11.4, module version = 1.2.0
[ 123.664] ABI class: X.Org Server Extension, version 6.0
[ 123.664] (II) Loading extension DRI2
[ 123.664] (II) LoadModule: "nvidia"
[ 123.664] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 123.698] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 123.698] compiled for 4.0.2, module version = 1.0.0
[ 123.698] Module class: X.Org Video Driver
[ 123.723] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:29:50 PDT 2012
[ 123.725] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 123.726] (--) using VT number 7
[ 123.748] (II) Loading sub module "fb"
[ 123.748] (II) LoadModule: "fb"
[ 123.748] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 123.757] (II) Module fb: vendor="X.Org Foundation"
[ 123.757] compiled for 1.11.4, module version = 1.0.0
[ 123.757] ABI class: X.Org ANSI C Emulation, version 0.4
[ 123.757] (II) Loading sub module "wfb"
[ 123.757] (II) LoadModule: "wfb"
[ 123.757] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 123.758] (II) Module wfb: vendor="X.Org Foundation"
[ 123.758] compiled for 1.11.4, module version = 1.0.0
[ 123.758] ABI class: X.Org ANSI C Emulation, version 0.4
[ 123.758] (II) Loading sub module "ramdac"
[ 123.758] (II) LoadModule: "ramdac"
[ 123.758] (II) Module "ramdac" already built-in
[ 123.760] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 123.760] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 123.760] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 123.770] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 123.770] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 123.770] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 123.770] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 123.770] (==) NVIDIA(0): RGB weight 888
[ 123.770] (==) NVIDIA(0): Default visual is TrueColor
[ 123.770] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 123.770] (**) NVIDIA(0): Option "TwinView" "0"
[ 123.770] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
[ 123.770] (**) NVIDIA(0): Option "Coolbits" "1"
[ 123.770] (**) NVIDIA(0): Option "TripleBuffer" "false"
[ 123.770] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
[ 123.771] (**) NVIDIA(0): Enabling 2D acceleration
[ 124.831] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 124.831] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 124.831] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 124.831] (EE) NVIDIA(0): README for additional information.
[ 124.831] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 124.831] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 124.831] (==) NVIDIA(1): RGB weight 888
[ 124.831] (==) NVIDIA(1): Default visual is TrueColor
[ 124.831] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 124.831] (**) N -
[Solved] Nvidia Twinview issue
I am running 2 monitors (well technically, one is a TV, the other is a monitor) on my desktop, and every time I set up the TV using nvidia-settings for twinview, some part of the screen ends up off the TV. The problem lies soley with the TV, and not my original monitor. I also am running the same driver on my laptop, and it has the same issue with this TV, and another TV I have used.
Below are some images:
This is what I see.
This is a screenshot of both the monitor (left) and desktop (right).
As you can see the window on my TV is maximized, but on my screen, significant parts of it are cut off. I have tried googling this before, and since it is happening to 2 different machines with completely different hardware (both in terms of the cards being different and the second monitors being different), I doubt it is limited to just me. Is it just a driver issue, or am I missing something?
Last edited by cmays90 (2011-07-14 17:05:06)It's "overscan" and is a stupidity by the TV. It thinks it's getting a TV signal, not a computer picture. On my TV, you select what kind of input is is coming in. Check for something like that, or if the tv has an overscan setting and turn it off. If not, there's an overscan setting in nvidia-settings.
A bit off-topic: A TV with a resolution of 1280x720? Haven't seen this before. TVs in Europe are either "HD-Ready" (1366x768), or "Full-HD" (1920x1080).
Last edited by Gusar (2011-07-14 16:54:13) -
Cannot load nvidia driver module [SOLVED]
OK so for some reason I can no longer load the nvidia (proprietary) driver.
I have a laptop with optimus, on board intel and discrete nvidia GTX680M. I use this laptop for cuda development so I don't care about games etc, I just need the driver loaded to debug and run my cuda apps. bbswitch still works fine as does bumblebee which I don't use normally but I do have it setup and running in case. Also I didn't really work much on coding last week so not sure exactly when this started.
So here is what happens when I try to insert the nvidia module or use optirun:
$ sudo modprobe nvidia
modprobe: ERROR: could not insert 'nvidia': No such device
$ sudo insmod nvidia
insmod: ERROR: could not load module nvidia: No such file or directory
$ optirun -vv glxspheres
[ 27.485342] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 27.485506] [INFO]Configured driver: nvidia
[ 27.485635] [DEBUG]optirun version 3.2.1 starting...
[ 27.485642] [DEBUG]Active configuration:
[ 27.485645] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 27.485662] [DEBUG] X display: :8
[ 27.485674] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 27.485676] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 27.485679] [DEBUG] Accel/display bridge: primus
[ 27.485681] [DEBUG] VGL Compression: xv
[ 27.485684] [DEBUG] VGLrun extra options:
[ 27.485686] [DEBUG] Primus LD Path: /usr/lib:/usr/lib32
[ 27.560627] [INFO]Response: No - error: Could not load GPU driver
[ 27.560647] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 27.560651] [DEBUG]Socket closed.
[ 27.560666] [ERROR]Aborting because fallback start is disabled.
[ 27.560671] [DEBUG]Killing all remaining processes.
I don't have an xorg file for the intel gpu.
device nodes are created:
$ ls /dev/ | grep nv
crw-rw-rw- 1 root root 195, 0 Sep 24 14:58 nvidia0
crw-rw-rw- 1 root root 195, 255 Sep 24 14:58 nvidiactl
log info:
$cat /var/log/Xorg.0.log | grep EE
[ 3.385] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.299] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.308] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.308] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
$ cat /var/log/Xorg.8.log
[ 11367.762]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 11367.762] X Protocol Version 11, Revision 0
[ 11367.762] Build Operating System: Linux 3.11.0-1-ARCH x86_64
[ 11367.762] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
[ 11367.762] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1c3a736e-6aab-45e1-a9ad-5d2f6195cd7d ro quiet
[ 11367.762] Build Date: 13 September 2013 01:28:59PM
[ 11367.762]
[ 11367.762] Current version of pixman: 0.30.2
[ 11367.762] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 11367.762] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11367.762] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Sep 19 23:04:24 2013
[ 11367.762] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 11367.762] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 11367.762] (==) ServerLayout "Layout0"
[ 11367.762] (==) No screen section available. Using defaults.
[ 11367.762] (**) |-->Screen "Default Screen Section" (0)
[ 11367.762] (**) | |-->Monitor "<default monitor>"
[ 11367.762] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 11367.762] (**) | |-->Device "DiscreteNvidia"
[ 11367.762] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11367.762] (**) Option "AutoAddDevices" "false"
[ 11367.762] (**) Option "AutoAddGPU" "false"
[ 11367.762] (**) Not automatically adding devices
[ 11367.762] (==) Automatically enabling devices
[ 11367.762] (**) Not automatically adding GPU devices
[ 11367.762] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11367.762] Entry deleted from font path.
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11367.762] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11367.762] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 11367.762] (==) |-->Input Device "<default pointer>"
[ 11367.763] (==) |-->Input Device "<default keyboard>"
[ 11367.763] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 11367.763] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 11367.763] (II) Loader magic: 0x7fdc20
[ 11367.763] (II) Module ABI versions:
[ 11367.763] X.Org ANSI C Emulation: 0.4
[ 11367.763] X.Org Video Driver: 14.1
[ 11367.763] X.Org XInput driver : 19.1
[ 11367.763] X.Org Server Extension : 7.0
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11367.763] setversion 1.4 failed
[ 11367.764] (--) PCI:*(0:1:0:0) 10de:11a0:1558:5105 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 11367.764] Initializing built-in extension Generic Event Extension
[ 11367.764] Initializing built-in extension SHAPE
[ 11367.764] Initializing built-in extension MIT-SHM
[ 11367.764] Initializing built-in extension XInputExtension
[ 11367.764] Initializing built-in extension XTEST
[ 11367.764] Initializing built-in extension BIG-REQUESTS
[ 11367.764] Initializing built-in extension SYNC
[ 11367.764] Initializing built-in extension XKEYBOARD
[ 11367.764] Initializing built-in extension XC-MISC
[ 11367.764] Initializing built-in extension SECURITY
[ 11367.764] Initializing built-in extension XINERAMA
[ 11367.764] Initializing built-in extension XFIXES
[ 11367.764] Initializing built-in extension RENDER
[ 11367.764] Initializing built-in extension RANDR
[ 11367.764] Initializing built-in extension COMPOSITE
[ 11367.764] Initializing built-in extension DAMAGE
[ 11367.764] Initializing built-in extension MIT-SCREEN-SAVER
[ 11367.764] Initializing built-in extension DOUBLE-BUFFER
[ 11367.764] Initializing built-in extension RECORD
[ 11367.764] Initializing built-in extension DPMS
[ 11367.764] Initializing built-in extension X-Resource
[ 11367.764] Initializing built-in extension XVideo
[ 11367.764] Initializing built-in extension XVideo-MotionCompensation
[ 11367.764] Initializing built-in extension XFree86-VidModeExtension
[ 11367.764] Initializing built-in extension XFree86-DGA
[ 11367.764] Initializing built-in extension XFree86-DRI
[ 11367.764] Initializing built-in extension DRI2
[ 11367.764] (II) LoadModule: "glx"
[ 11367.764] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 11367.773] (II) Module glx: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Server Extension
[ 11367.773] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 11367.773] Loading extension GLX
[ 11367.773] (II) LoadModule: "nvidia"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11367.773] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Video Driver
[ 11367.773] (II) LoadModule: "mouse"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 11367.773] (II) Module mouse: vendor="X.Org Foundation"
[ 11367.773] compiled for 1.14.0, module version = 1.9.0
[ 11367.773] Module class: X.Org XInput Driver
[ 11367.773] ABI class: X.Org XInput driver, version 19.1
[ 11367.773] (II) LoadModule: "kbd"
[ 11367.774] (WW) Warning, couldn't open module kbd
[ 11367.774] (II) UnloadModule: "kbd"
[ 11367.774] (II) Unloading kbd
[ 11367.774] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11367.774] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 11367.774] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11367.774] (--) using VT number 7
[ 11367.774] (II) Loading sub module "fb"
[ 11367.774] (II) LoadModule: "fb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11367.774] (II) Module fb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11367.774] (II) Loading sub module "wfb"
[ 11367.774] (II) LoadModule: "wfb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11367.774] (II) Module wfb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "shadow"
[ 11367.774] (II) LoadModule: "shadow"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 11367.774] (II) Module shadow: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.1.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "ramdac"
[ 11367.774] (II) LoadModule: "ramdac"
[ 11367.774] (II) Module "ramdac" already built-in
[ 11367.774] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11367.774] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11367.775] (==) NVIDIA(0): RGB weight 888
[ 11367.775] (==) NVIDIA(0): Default visual is TrueColor
[ 11367.775] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11367.775] (**) NVIDIA(0): Option "NoLogo" "true"
[ 11367.775] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseEDID" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 11367.775] (**) NVIDIA(0): Enabling 2D acceleration
[ 11367.775] (**) NVIDIA(0): Ignoring EDIDs
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 11367.775] (**) NVIDIA(0): mode
[ 11368.299] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 11368.300] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680M (GK104) at PCI:1:0:0 (GPU-0)
[ 11368.300] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 11368.300] (--) NVIDIA(0): VideoBIOS: 80.04.29.00.01
[ 11368.300] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11368.300] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680M at PCI:1:0:0
[ 11368.300] (--) NVIDIA(0): none
[ 11368.300] (II) NVIDIA(0): Validated MetaModes:
[ 11368.300] (II) NVIDIA(0): "nvidia-auto-select"
[ 11368.300] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 11368.300] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 11368.300] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 11368.300] (--) Depth 24 pixmap format is 32 bpp
[ 11368.300] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 11368.300] (II) NVIDIA: access.
[ 11368.304] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11368.304] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 11368.304] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11368.304] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11368.304] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11368.304] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 11368.304] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 11368.304] (II) NVIDIA(0): Config Options in the README.
[ 11368.304] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 11368.308] Loading extension NV-GLX
[ 11368.312] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11368.312] (==) NVIDIA(0): Backing store disabled
[ 11368.312] (==) NVIDIA(0): Silken mouse enabled
[ 11368.312] (==) NVIDIA(0): DPMS enabled
[ 11368.312] Loading extension NV-CONTROL
[ 11368.312] (II) Loading sub module "dri2"
[ 11368.312] (II) LoadModule: "dri2"
[ 11368.312] (II) Module "dri2" already built-in
[ 11368.312] (II) NVIDIA(0): [DRI2] Setup complete
[ 11368.312] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 11368.312] (--) RandR disabled
[ 11368.316] (II) Initializing extension GLX
[ 11368.342] (II) Using input driver 'mouse' for '<default pointer>'
[ 11368.342] (**) Option "CorePointer" "on"
[ 11368.342] (**) <default pointer>: always reports core events
[ 11368.342] (WW) <default pointer>: No Device specified, looking for one...
[ 11368.422] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 11368.422] (--) <default pointer>: Device: "/dev/input/mice"
[ 11368.422] (==) <default pointer>: Protocol: "Auto"
[ 11368.422] (**) <default pointer>: always reports core events
[ 11368.422] (**) Option "Device" "/dev/input/mice"
[ 11368.475] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 11368.475] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 11368.475] (**) <default pointer>: Buttons: 9
[ 11368.475] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 11368.475] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 11368.475] (**) <default pointer>: (accel) acceleration profile 0
[ 11368.475] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 11368.475] (**) <default pointer>: (accel) acceleration threshold: 4
[ 11368.475] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 11368.769] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 11368.769] (II) LoadModule: "kbd"
[ 11368.769] (WW) Warning, couldn't open module kbd
[ 11368.769] (II) UnloadModule: "kbd"
[ 11368.769] (II) Unloading kbd
[ 11368.769] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11368.769] (EE) No input driver matching `kbd'
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11368.772] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11368.772] setversion 1.4 failed
[ 11368.772] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event1)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event2)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse0)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event16)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event18)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event8)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11374.183] (II) UnloadModule: "mouse"
[ 11374.199] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 11374.200] (EE) Server terminated successfully (0). Closing log file.
I'm not willing to give up and install/build the drivers from the cuda SDK just yet so any help would be greatly appreciated.
Last edited by tim (2013-10-02 08:20:49)So in simple terms, the fix invovled ensuring the nvidia module is loaded before the bbswitch module. I'm not sure about the necessity of the things that follow but the fix may possibly also require removing bumblebee and possibly requires removing nvidia from repos and building the driver downloaded from nvidia.
This fix could be completely unrelated to the problems I was having with arch but I cannot verify the fix on arch specifically cos I installed every distro under the sun trying to get it all working and I got it to work on a non arch distro.
So... I'm not sure if I should really mark this a solved because I haven't/can't verify it on arch and technically the solution involved changing to another distro but in fact, I know it has absolutely nothing to do with arch since I saw the same behaviour on 3 other distros. If I have time, I will reinstall arch and verify but for the moment, I have a lot of work to catch up on now that I have a working nvidia driver I can actually use for dev
Anyway, what I think is going on is there is some bizarre issue with bbswitch that stops the nvidia driver from being found because on the current distro I have installed, if I have no bbswitch, no bumblebee and no nvidia modules loaded or services running etc. I can modprobe the nvidia driver and all works fine. I can then modprobe the bbswitch driver and that works too. IF I modprobe the bbswitch driver first and then modprobe the nvidia driver, I get this error that says the nvidia module cant be found. The location it prints is in some updates directory whcih is odd too because I installed from nvidia source and never installed updates at all and made sure that there were absolutely no repo nvidia drivers or updates etc.
Last edited by tim (2013-10-02 08:35:39) -
Photoshop CS6 - 64 bit Optimus issue - SOLVED!
Photoshop CS6 64-bit will not run when Optimus is enabled on my W520 system The program works fine if I have discrete only set in the BIOS. Setting the default graphics adapter to NVIDIA GPU when using Optimus still has the problem. Anyone seen this issue before? CS6 Photoshop 32-bit runs OK under Optimus with the NVIDIA GPU set as default. I'm stumped so far. I searched the Adobe Support site and found nothing concerning this issue.
Update_1: I initially installed the latest NVIDIA driver from the W520 Driver Matrix. The NVIDIA level downleveled from 296.88 to 296.20, but CS6 started working properly. I then downloaded the latest NVIDIA driver 301.42 which was the level recommended by several graphics sites. The system is working smoothly now. CS6 will now use the OpenGL and acceleration features of the 2000M. BTW, my WEI changed from 6.5 to 6.6 with this driver. The 3D graphics still remains at 6.9.
Update_2: I encountered yet another anomaly with the display driver. I placed the system into Discrete Graphics and updated the display driver to 301.42. When I set the system back to Optimus, the CS6 programs could no longer access the NVIDIA GPU. I had to reinstall the 301.42 drivers again in Optimus mode to have everything back to full function. I switched back to Discrete mode to check if things were still working (they were) and then I returned to Optimus mode and the programs continued to function properly. There must be a sequence that requires Discrete updates first, and them=n Optimus, but I've never seen it documented.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0
Solved!
Go to Solution.Thanks for tip!!!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
"Failed to load the NVIDIA kernel module" [SOLVED]
Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)." -
[xorg7] international keyboard issues [SOLVED]
note that i've read the wiki as well as most of the related posts here in the bbs
thereafter i edited :etc:x11:xorg;conf (sorry, keyboard is lost)
got xf86-input-keyboard and xf86-input-mouse and xf86-video-nv installed, as well as xorg-fonts-100dpi;
since it didn't do what i wanted, killed x and launched xorgcfg -textmode to reconfigure it, with no difference; shoud i try hwd -x ,
xorg7 starts in this location, but have issues left :
- keyboard configuration is lost in x : capital, accentuated are lost; i'm on a international (105) fr keyboard
- mouse scroll is gone
- the shift keys do not allow me to select any string (but the middle mouse button does)
cannot find yet a related topic that would give me some hint on how to solve this;
can someone give a hand on this issue please ,
/etc/X11/xorg;conf :
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
Section "Module"
#Load "glx" Unsupported with Composite extension
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
#Option "XkbVariant" "nodeadkeys" ## accents ds les consoles, mais empeche les accents circonflexes dans les applis X
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 97.0
VertRefresh 50.0 - 180.0
Section "Device"
#Driver "vesa"
#Driver "nvidia"
Identifier "Card0"
Driver "nv"
VendorName "All"
BoardName "All"
Card "NVIDIA GeForce"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "DPMS"
Option "nvagp" "1"
# should be switched off *if* the system crash:
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite"
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSectionTrying out ...
is this writen somewhere and i missed it ?
It seems to solve all of my keyboard & mouse issues.
Only is the cursor quite bizarre ; when i go left with the [left arrow],the cursor shows in every position it goes (dunno if one can visualize this!), and doesn't blink anymore. Anyway that's just a detail that I'l cope with later.
Thanks a lot Cerebral -
After Effects: "You have this plugin twice" issue SOLVED
Do you get problems in After Effects telling you that you have more than one time a plug-in, installed on your system? What After Effects does, is to scanning the Plug-ins and presets every time it opens, if you by mistake installed one plug-in two times, you will get an error telling you that you may have an issue working with this plug-in and, is better that you close After Effects and uninstall this plug-in. Well my friend gave me few plug-ins that he had, but it seems like I had some already installed. Every time I opened my After Effects for each plugin I had two times installed, it was stopping the scanning and informing me about the situation. It was really annoying to click too many times on “OK”. So I came up with an answer.
) First go to directory where your After effects is installed. Usually it is: C:\Program Files\Adobe\Adobe After Effects CS4.
) Go to “Support Files” folder and then to “Plug-ins”
) If you are using Vista or 7, use the search box on the right top corner of you window, if you are on XP, use the search button and click “find files and folders” (I don’t actually remember if it is like this)
) Then search “*.*” without the quotes (This will scan your folder and will show you all the files inside the Plugins folder)
) Look carefully to see the plugins icon (easy to recognize) and the name of the plugin, if you see a plugin name two times, that is the plugin that cause you the problem.
) Right click on one of the two and delete it.
) You can also follow the other way. When after effects pop up this problem with the plugin issue, it will tell you the actual name of the plugin, write down the name on a paper if you can’t remember, close after effects, navigate to the Plugin folder, and search specific for the plugin with this name. You will notice that it will appear twice. Delete one of these plugins.
) BE CAREFULL, DO NOT EMPTY THE RECYCLE BIN YET.
) First open After Effects, and see if the problem is solved. Use the Plugin on an SOLID or ADJUSTMENT layer, and when you are sure that everything is all right, you can empty the recycle bin.
I know that maybe this is not a big deal and maybe everybody can came up with this idea to solve the problem, but you never know if a person is really need a help on this.
Thank you for reading.1/ i use after efects cc 2014 (i don't know version number)
3/ windows 8.1 64bit
4/
5/ info my computer: core i7, ram 8G, graphics nvidia quadro 1000 -
Black screen - Xorg/GDM config - Nvidia Optimus? [solved]
Hi!
I have a Samsung RC539 S09, which has got an Nvidia Optimus graphics card, I want a graphical Xserver on that machine. Therefore I followed the wiki and installed the Nvidia stuff (https://wiki.archlinux.org/index.php/NVIDIA). I did not configure anything jet. I also installed the Xorg stuff and kept the config default (https://wiki.archlinux.org/index.php/Xorg). Then I did nvidia-xconfig:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 ([email protected]
ia.com) Wed Jul 27 17:15:58 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
I have dbus runnung and do rc.d/gdm start.
[root@myhost ~]# gdm-binary[1147]: WARNING: GdmDisplay: display lasted 1.143111 seconds
gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029825 seconds
gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029360 seconds
gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029428 seconds
gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029470 seconds
gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029108 seconds
gdm-binary[1147]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
My logfile says, that after successfully loading the modules, the failure occures at:
[ 591.812] (EE) No devices detected.
[ 591.812]
Fatal server error:
[ 591.812] no screens found
[ 591.812]
Please consult the The X.Org Foundation support
at http://wiki.x.org
What does that mean? - No devices detected - can refer to these Nvidia Optimus stuff, where there's some ondemand switching for graphics acceleration afaik. I'm not sure how to solve my issue. So at this point could need some help
Best,
wishi
edit: got this working with the intel stuff. Did onyone archive GPU support jet?
Last edited by windsheep (2011-08-20 20:34:25)first at all check
lspci | grep -i vga
I have optimus and I see both cards, Intel and nVidia.
What do you see?
If you install xf86-video-intel instead of nvidia driver, does it work then? (backup & remove /etc/X11/xorg.conf then)
I had to disable optimus and switch to my dedicated nVidia graphics card in bios in order to make nvidia driver work.
Now I'm using intel with bumblebee (optimus support for linux) & optimus enabled in bios, and bumblebee loads proprietary nvidia drivers when required.
But I also have a thinkpad t510, I don't know if bumblebee works with your device.
cheers, kulpae
Last edited by kulpae (2011-08-20 14:45:41) -
Windows 8 64-bit install on 970a-g46 Mainboard AHCI and NVIDIA DRIVER issues
My Box:
MSI 970A-G46
BIOS 1.9 (AUG 2012) (Tried 1.11 but the nightmare started then)
AMD FX-6100 (STOCK SPEED AND SETTINGS) WITH OEM HSF
16GB PATRIOT VIPER 3 (1866) RUNNING @ (1600)
USED an EVGA 9800GT 1ST AND UPGRADED TO NVIDIA REFERENCE CARD GTX 550 Ti (1GB) WITH SAME ISSUES
90gb MonsterDigital Daytona SATA III SSD DRIVE (OS and minimal programs)
Antec HE 550
I am at a point of pulling my hair out. I decided to upgrade my system to enhance Diablo III game play. I got a combo deal on the mainboard and cpu, and thought the speed of the game caching on a SSD would also help. The first attempt which took a little struggle was Vista 64-bit. Eventually, I was able to get the OS to work with me, and it was smooth. Since M$ decided to offer the Windows 8 Pro upgrade for only $39.99, I thought, what do I had to lose. Well….lots of time. Now, I am not a newbie, though SSD drives haven’t been more than an interesting thought. So yes, I read many guides on everything from Trim enabled Win 7 and 8, and many other do’s and don’ts. What is driving me to the Netherlands of hell, is the installation and how buggy it has been. It boils down to drivers for the IDE/SATA/AHCI CONTROLLER. First, even thought it “sees” the SSD on installation drive selection, after pulling the USB installation drive, the system forgets it, and there is a “problem with the boot sector”. If you load the driver from the AMD site, it lets the install occur “fine”, but there is an issue with that driver which causes an irq conflict which leads to D3 audio issues and freeze ups. I did finally get things in order (not sure which driver I choose for that), and things were smooth, except I tried to install the GTX 550 ti and that led to a corrupt file error, which the system runs a check disk and cycles the “preparing to repair” and “diagnosing PC” a few times and never allows me to enter SAFE MODE (shift+f8), to disable the NVIDIA driver that is buggy, and doesn’t allow for the NVIDIA Control Panel to install without losing video, and starts the repair cycles again… Leading to ANOTHER RE-INSTALL...
My question, for the Windows 8 Pro installation on the 970a-G46 mainboard and then after install is complete, which driver is the correct choice for the AHCI/SATA Controller? All I find is Win7 64-bit AHCI inf’s, and SB7XX 64-bit inf’s (no SB950 INF). The Driver disk which came with the mainboard is very dated pre Win 8 stuff, ASMEDIA X106 which are not recognized by the OS as written for Win 8. AMD’s latest drivers are the ones causing the IRQ type lags and corruption.
What version, build and type of Windows 8 installations have you used on this mainboard, and what drivers allowed you install it without the above conflicts? Your input may decrease my insanity… So, thank you in advance…Quote from: m0r9h3u5 on 28-January-13, 12:11:16
I understand what you are telling me, only the generic drivers deliver subpar results. What is the point of running those drivers instead of windows 8 certified drivers written for said devices. My last install is functioning better, but still windows update fails every attempt, the apps i install (ie. weather bug) on the start screen wont load... to me windows 8 is a big fail....but that is just my view...
OK...I also own the 970a G46, and my upgrade experience from Win7 x64 AHCI to Win8 x64 AHCI was flawless the first time. No problems at all. You are running an AMD chipset board with a nVidia gpu, which means that your chipset drivers are not automatically updated with every gpu driver update you do--this would happen automatically if you owned an AMD gpu because AMD includes them in its gpu driver install packages. But--all you have to do to get the proper drivers for your motherboard is go here and download them. You only need the *chipset drivers* from this page--you do not need the RAID drivers, of course. That's it. It's no big deal, and back in the days when nVidia was making motherboard chipsets you had to separately download both the motherboard chipset drivers from nVidia and the AMD gpu drivers from AMD if you did not also own a nVidia gpu.
From your description of your problems it sounds like your installation of Win8 is hosed and you need to format C:\ and clean install from scratch, anyway, so...
A note about AHCI--the *ideal* way to install the AHCI drivers is prior to installing your OS for the first time, you enter the UEFI and set "AHCI" in the appropriate place, instead of IDE, and *then* you reboot from DVD and install your OS which will automatically install the correct AHCI driver from Windows. After the driver installation is complete you should then install the updated 970a drivers from AMD as linked above.
However, it is actually very easy to activate and install AHCI *after* you have installed Windows in normal IDE mode:
To enable AHCI in existing Windows 8 IDE Installation's
Caution: Do NOT enable AHCI in UEFI prior to making the following changes in your Registry! If you had AHCI enabled alreadyin UEFI, disable it first and restart your computer!
Use WinKey + R and type Regedit in the command line and hit the Enter key, this will open the Registration Editor.
Go to:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/iaStorV
right click on Start, select Modify and set Data Value to 0
Close Registration Editor and restart computer.
While booting, open the UEFI Page and set the SATA Mode to AHCI from IDE
Save UEFI settings and restart.
Windows will now install the AHCI drivers automatically and they should work without issues.
In order to avoid installation problems just like you have been experiencing, here is what I would do in your shoes:
1) Set UEFI for normal IDE drive mode
2) Reboot into IDE mode and install your OS
3) After you have finished with the installation, you should be having no troubles in IDE mode. Then go to the instructions above on how to properly enable AHCI *after* you have installed Windows 8 in normal IDE mode.
4) After everything is coming up roses in AHCI mode and you are having no problems, then install the AMD chipset drivers as linked above and you are golden.
Those 4 steps worked perfectly for me the first time (the first time I got them right, that is...).
There's nothing wrong with Win8--this is strictly operator error caused by insufficient research into what AHCI is and how to properly enable it. The Internet has some bad info on Win8 registry settings for AHCI because of the developer preview and the consumer preview versions of Win8 that Microsoft released to the public prior to the final shipping build--many "instructions" for Win8 are therefore not valid for the shipping version of Win8. At first I made some of the same goofs that you did, but now you get to benefit from my hard-won experience... Good luck! Should work like a charm. And, registry AHCI is done differently in Win8 than it is done in Win7 or Vista. Also, the registry settings relative to AHCI in Windows 8 for AMD are different from the registry values that must be changed for an Intel controller.
Parenthetically, My FX-6300 (Vishera) will be here in a couple of days! Yeah! -
Front row in Lion 10.7 issue (-70012) and video_ts not playing issue -solved
Hi all,
thought I just post my solution to the front row issues in 10.7. I looked for a solution for days, and when I found it, I thought it would make other peoples live easier if I combine everything in one post.
I actually had a couple of issues:
PROBLEM:
first front row stopped playing VIDEO_TS files in 10.6.
the second issue occurred when I thought upgrading to 10.7 would solve the issue; Front row still couldn't play the VIDEO_TS, because FRONT ROW was gone...
SYMPTOMS:
both issues always showed the same symptoms:
when a dvd-back folder was selected, front row would show a black screen, and then, caused by my frantic pushing the ESC button, front row would give me the dvd player not valid -70012 error.
CAUSE:
so what happened? I chose to buy my MBP 17" with the smallest HDD (yep sorry, was cheap-s-ing). Then later that year, I decided to buy the HDD caddy and switch my internal superdrive for a SSD. I ended up placing the original HDD in the hdd caddy, which I then put in the Superdrive's slot, and I placed the SSD in the slot where the original HDD was residing first. I now had a MBP 17" late 2011, with vertex3 SSD. I forgot, I also put in 16 GB, replacing the 8 GB.
So, when I back-upped all my favorite DVDs as VIDEO_TS files, (no I did not download dvds through usenet), grabbed the popcorn, and started Front Row, the disappointment began. No VIDEO_TS file would play, always the same -70012 error message. So after a lot of internet research I stumbled upon a guy who said: yeah, you have to upgrade to 10.7. After the upgrade my FRONT ROW was gone.
SOLUTIONS:
In 10.6:
As Apple's DVD player is always looking for the internal dvd player as a prerequisite to start, Front Row, which uses Apple's DVD player as video player, will throw up the -70012 error. 'Cause it finds the HDD in the HDD Caddy instead of the SuperDrive. So in 10.6 (and in 10.7 also) you can use the following solution:
(I got this solution partial from http://reviews.cnet.com/8301-13727_7-20070591-263.html)
1: modify the DVDPlayback framework that the DVD Player uses so that it will recognize external drive as a valid DVD playback device. (The HDD Caddy came with an external casing for the SuperDrive)
2: download a hex editor (I used Hexedit 220 from http://hexedit.sourceforge.net/ )
3: Go to the folder /System/Library/Frameworks/ and back up the file "DVDPlayback.framework."
4: Open Hexedit_220 and use it to open the following file:/System/Library/Frameworks/DVDPlayback.framework/Versions/A/DVDPlayback.
5: Using the editor's find&replace through COMMAND-F, replace "Internal" with the text "External" and save the file. Note that Hexedit also saves a backup automatically.
6: Close the file once saved, and then run a permissions fix on the boot drive using Disk Utility. Then restart the system and you should now be able to play DVDs off the external drive using DVD Player. That is, If you use an external dvd player (which I don't use).
7: I inserted a very small USB stick in the MBP with no data on it, and Front Row and Apple DVD Player accepted this. I could now play my backupped DVDs.
ofcourse, I still wanted to upgrade to 10.7, so here's the solution to 10.7
10.7:
upgrading was a simple click with the mouse, worked like a charm, Office still worked, and some minor updates installed through software.
Front Row however, gone...
I used the steps outlined in http://osxdaily.com/2011/07/21/front-row-for-mac-os-x-lion/ to get Front Row back:
- first get the package from Madhatter: Download the free package installer by MacHatter
- install, or customize the install
- all done.
Then I used the steps from step 3 through 7 outlined above in solution 10.6.
Catch:
So I did not find a solution to fooling the DVD Player / Front Row with the USB stick. So everytime I watch VIDEO_TS in Front Row the USB stick must be inserted. But, the good news, I can still use my remote control for something.
Hope I helped some guys out there with this solution.
Regards,
JohnnoThe issue has previously hit Apple TV owners. I think people came to the conclusion that it was a HDMI handshake problem. Basically the process where the device and TV greet each other, make up some rules about communicationg and what their secret key is and so on.
I haven't tried this yet, but my local service center says that basically I can do one of two things:
- Downgrade to 10.7 and then download the 10.7.1 update from Apples website. To do this without having a Mac OS X Lion disc, you can hold down CMD + R when the computer boots to be able to access the recovery partition on newer Macs that come without the OS disc.
or..
- Put something in between the computer and TV. For example, if you're using an amplifier as a part of your home theather set up, this will probably work. The service guy said he has his Mini connected to the amplifier, which in turn is connected to speakers and a projector. The inverted colors still appear, but only once per night (i.e. after the first problem is reset by resetting the link then it's fine).
For now, I'll do my little dance of changing the source on the TV from HDMI 1 to HDMI 2 and then back again to reset the link... But, I'll probably try downgrading in a few days.
Maybe you are looking for
-
Doc Splitting - Intercompany Vendor Invoice
I am stuck with an issue while posting an inter-company vendor invoice involving two expense line items. I have created two debit line items as follows: 40 40000601 service expenses 1000.00 1200 (co.code) 40 4000601 service expen
-
I have iMovie 11 and want to use a push transition. It does not appear that iMovie 11 has it. Anyone know how to find it, or whether or not there is a plugin for it?
-
EM not working Properly after computer name change
Hi Friends, i hav 10gr2 DB, everything was fine. last week my computer name changed, and EM stops to work. so i reconfigure EM through command line. after that EM started, but when go to 'Performance' or any other tab in browser. its asks for login a
-
CS6 dead slow moving layers and groups
I have this brand new PC, got it last week, i7 core, SSD drive, 16gb ram. When I open my PSD doc with my design (approx 43mb psd file) then the photoshop application spikes in memory usage, to 3.5gb (from 120mb), and moving groups and layers around
-
I downloaded sqldeveloper on my linux desktop and tried to launch it as recommended in the documentation. I'm getting the following error: jvdernet@jvdernet-2:/usr/local/bin> sqldeveloper Oracle SQL Developer Copyright (c) 2006, 2007, Oracle. All rig