Xcode 3.0 and highlighted out SVN SCM repositories
Hi. I am experiencing a problem similar to the one mentioned on this website: http://macresearch.org/xcode-30-and-svn-linux-server
Rather than reply to a 5-month-dead, unofficial blog post, I figured I'd have a better shot of getting help here.
My SVN repository is hosted on SourceForge, and XCode is checking out revisions just fine, but when I go into Project -> Edit Project Settings, the current SCM Repository is "None," and the SCM Repository that I would like to use is highlighted out.
I can't seem to figure out why this is happening.
I've also tried committing manually in the Terminal, but since the project was imported to SVN with the target application already built, SVN is looking for a .svn folder within the directory thisProject/build/Release/thisApplication.app/
This means that get errors from SVN when I try to commit after rebuilding the app.
Obviously, I want to build and test the app before I commit any changes, so I am kind of stuck.
Anybody?
Similar Messages
-
my daughter is 12 and i need books that highlight and read out loud, how do i know whick books do that
Regarding the cursor moving on its own, see:
My mouse keeps moving around on its own, as if someone is remotely controlling my Mac!
This is not known behavior of Flashback. To make sure you're not infected, just install any updates that are available in Software Update. For more info on this, see About the Flashback malware.
That e-mail just sounds like a phishing attempt, and trying to open and view the attached zip file is a major error! It probably contains malware. Fortunately for you, it's almost certainly Windows malware, as I've never yet heard of a case of Mac malware being sent via e-mail in this way. But it could happen, so you should never, ever open attachments from people you don't know, especially in such suspicious circumstances!
Finally, I, like etresoft, have never heard of Avira. There's a lot of bad AV software out there, so without knowing more about it, I would agree that it should be removed, using whatever uninstaller is provided by Avira. If you want to use AV software, use either Sophos Anti-Virus for Mac Home Edition or ClamXav. Both are free and excellent.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.) -
Revision: 21141
Revision: 21141
Author: [email protected]
Date: 2011-04-26 06:40:39 -0700 (Tue, 26 Apr 2011)
Log Message:
Bug: 2780176 - Logging and logging out multiple times in LCDS can cause duplicate session detected errors.
QA: Yes
Doc: No
Checkintests: Pass
Details: When a logout was followed by an immediate login, sometimes the server would throw duplicate session detected errors. This was because when logout happened, a fire-and-forget disconnect message was sent to the server that established a new session, and if the subsequent login happened before disconnect ACK returned from the server, that would establish another session and hence the error. The fix is to insert a slight delay between disconnect and ResultEvent dispatching. This way, disconnect has a chance to return before a login is performed.
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asYou've got an incompatible Logitech driver and java was incompletely uninstalled.
You may have a problem with the Wacom driver.
I don't know if fixing those things will help.
There also a few window server errors, but I don't know if they are causal.
If you can note the time of the hangs, that might help narrow it down in the logs. -
Please see my code and helpme out pls
//Making Circle here
gridx=20;
gridy=20;
num=0;
for (var i=0;i < 10;i++)
for (var j=0;j < 10;j++)
dot.duplicateMovieClip("dot"+num,num);
mc=this["dot"+num];
mc._x=gridx*i;
mc._y=gridy*j;
num++;
dot._visible=0;
// here i make plain circle, but problam is my all circle
open in fornt side, i want to that all my circle in background
//hide all selection MovieClip
for(i=1; i<=100; i++){
this.createEmptyMovieClip("test_mc"+i,
this.getNextHighestDepth());
this["test"+i]._visible = false;
// here i make fill circle mc, all hide with this code, but
problam is all circle come in background
//selection area
_root.onMouseDown = function() {
sel = this.createEmptyMovieClip("sel", 1);
sel.startx = _xmouse; // we need to reference these later,
so add them as properties of the selection clip
sel.starty = _ymouse;
this.onEnterFrame = function() {
with(sel){
clear();
lineStyle( 1, 000000, 100 );
moveTo(sel.startx, sel.starty);
lineTo(_xmouse, starty);
lineTo(_xmouse, _ymouse);
lineTo(sel.startx, _ymouse);
lineTo(sel.startx, sel.starty);
_root.onMouseUp = function() {
_root.select(sel.startx,sel.starty,sel._xmouse,sel._ymouse);
// call the selection function
removeMovieClip(sel);
this.onEnterFrame = undefined;
_root.select =
function(x1:Number,y1:Number,x2:Number,y2:Number){
// in case you dragged the selection box from right to left
or bottom to top, we need
// to work out the top left and bottom right coordinates..
var sx = Math.min(x1,x2);
var ex = Math.max(x1,x2);
var sy = Math.min(y1,y2);
var ey = Math.max(y1,y2);
for(var item in this){ // loop through all items in the
_root
if(typeof(this[item])=="movieclip"){ // if the current item
is a movieclip..
this[item]._visible = isInside(this[item],sx,sy,ex,ey);
function
isInside(mc:MovieClip,x1:Number,y1:Number,x2:Number,y2:Number):Boolean{
// check whether the selection coordinates enclose the mc
coordinates
return (x1<=mc._x && x2>=mc._x+mc._width
&& y1<=mc._y && y2>=mc._y+mc._height);
// here u can find selection option, selection option is
wroking, but same problam, it work in background, & hide my all
MC (that Plain Circle also) and highlight only which we select
// Some brif here:
i want to create plain circle in background, after that some
one want to slecte that palin circle highlight that circle only
with fill circle ( for better explaination see my fla file which is
attach here
Please see this
Pls pls help me out
thanks
praful damaniafor better explaination pls see my fla file which is attache
there & I have some quation about it as under
1) here i make fill circle mc, all hide with this code, but
problam is all circle come in background
2) here i make fill circle mc, all hide with this code, but
problam is all circle come in background
3) here u can find selection option, selection option is
wroking, but same problam, it work in background, & hide my all
MC (that Plain Circle also) and highlight only which we select
i want to create plain circle in background, after that some
one want to slecte that palin circle highlight that circle only
with fill circle
thanks for reply
Praful Damania -
I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?
After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.
-
System and landscape estiamte for SCM on Hana for Practice use
Hi All ,
We want to know the System and landscape estiamte for SCM on Hana for Practice use.
Regards,
AbhishekHi,
Perhaps this link could help
http://wiki.sdn.sap.com/wiki/display/SMSETUP/MaintenanceofProductintheSystemLandscape
Also check out the note :
For SCM Add-On Products like SAP SNC, SAP EM, SAP F&R the basis component (SAP Netweaver Release) has to be also assigned as relevant Product Instance
Might be helpful, if you check the product versions being reported for the system in the SLD.
Regards,
Srikishan -
JComboBox selection and highlight problem of the selected item
Hi,
I have a question how can I make my newly added item to the combo-box selectable and highlighted. I am adding new items to my custom comboBox dynamically and I want whatever item I add to be selected by default. I am using my own custom ComboBoxModel that extends AbstractListModel and implements ComboBoxModel and TreeModelListener, and my custom Renderer that extends JLabel and implements ListCellRenderer. Because I am trying to get a tree structure in my comboBox model and that's why I have my own custom model and renderer. Now when I add a new node or item to my comboBox it is being added and shown in the combo-box textField, but as soon I pull down the combo-box my parent directory is selected though my current selection is the last node added. That's how I am adding new nodes and making it selectable
treeModel.insertNodeInto(tempNode, (DefaultMutableTreeNode)nodeCollection.lastElement(), 0);
int nodeTotal =((CMRGlobals.myTreeGlobals).getModel()).getSize();
Object lastNode = CMRGlobals.myTreeGlobals).getModel()).getElementAt(nodeTotal - 1);
((CMRGlobals.myTreeGlobals).getModel()).setSelectedItem(lastNode);
when I do this my node is added under my parentNode and is shown in the comboBox but when I try to pull down the combo my parent node is high lighted and when I move out of the combo-box my parent node gets selected and show in the combo-box though I haven't selected it,and the contents of my last node are shown. I am just writing my own custom model that simulates the effect of JTree. I am using these......
DefaultMutableTreeNode and
DefaultTreeModel
and in my JComboBox I am setting my model as
this.setModel(new myModel(treemodel));
this.setRenderer(new myRenderer());
I am building my own FileDialog that just works like FileDialog I have all the functionality except this problem.Thanks for any help. I know I have posted this same thread yesterday but I didn't get any response hoping now may somebody can help me.Thanks againnever mind I got it
Thanks -
How to compare a database field and form field and highlight differences
Hi there,
I have been trying to find a coldfusion function that will help, I have tried comparing two strings but the results of -1 1 or 0 aren't very useful.
I need to compare a database field with a form field and highlight all the differences in the form field in red.
Thanks
KatieThis is a non-trivial process. Rather than doing a compare, you really are wanting to do a diff. CF doesn't do this out of the box, but you might want to have a sniff around on Google to see if anyone has implemented anything for CF.
Some reading:
http://en.wikipedia.org/wiki/Diff#Algorithm
Adam -
Why can't I make comments and highlight text in a document?
Why can't I make comments and highlight text in a document?
Nothing happens. I can select the text but when I go to “highlight” it the button is grayed out and nothing happens. Is there some sort of code that prevents certain publications from having portions of their text highlighted?
Karl -
Over the past few weeks I have noticed something with correcting shadow and highlight clipping in LR 5.7 and 5.7.1 I was not aware of and would like some opinions.
In one sentence, it appears that there is highlight clipping both in the White and Highlight portion of the histogram and shadow clipping in the Shadows and Blacks portion of the histogram. Up until recently I had assumed that if I wanted to globally recover highlights, I had to bring the Whites down. However, I have now seem quite a few photos, taken with different cameras (all Nikon), where the highlight clipping warning only went away after reducing the Highlights by -5.What you are seeing is perfectly normal for images with moderate to high dynamic range. The LR PV2012 Tone controls should be adjusted using a top-down workflow. Here's what I have found that works well:
PV2012 Basic Panel Tone Control Adjustment Procedure
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
1. Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
2. Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
3. Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
4. Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
5. The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
6. The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
7. Now go back and adjust the Contrast control to establish the best midtone contrast.
8. Lastly touch-up the Exposure control for the best midtone brightness.
9. If necessary “touch-up” the controls using the same top-down workflow. -
Dock stops magnifying and highlighting, it's same wth other links and icons
I have noticed a couple of times that my dock starts acting weird. It stops magnifying and highlighting icons. When I click the desired icon, it magnifies it. It stays magnified when I move mouse away and until I click something else. Its darn annoying. Kill Dock in terminal doesn't solve the issue, only rebooting does and I don't want to do that every time. I occurs on random, don't see a pattern in it.
Also, highlighting or "on roll over" functions are not working for other types of links and buttons including websites. Cursor doesn't change in to the finger etc.
What to do, what to do (beside rebooting every time).I had a similar problem. I lost dock magnification and and mouse rollover effects. It turns out when I unplugged my external mouse, everything returned to normal.
-
My timeline empty and grayed out. :-(
I shot a video of multiple presentations (1-10 min clips) in training class. I imported the clips into Premiere Pro CS3 in lieu of Elements (more my speed)...anyway. I want to create a highlights video using 30 secs to 1 minute excerpts from each clip (I have about 15) Problem #1: I have set markers and "ins and outs" for the excerpts I want; however; I do not know how to save and/extract them. Problem #2: My Timeline panel is empty and grayed out, so I cannot drag even the whole clips into the timelne.
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
Hello!
Here's what I'm trying to do: I have a window that needs to display String data which is constantly being pumped in from a background thread. Each String that comes in represents either "sent" or "recieved" data. The customer wants to see sent and recieved data together, but needs a way to differentiate between them. Since the Strings are being concatinated together into a JTextPane, I need to highlight the background of each String with a color that represents whether it is "sent" (red) or "recieved" (blue) data. Should be easy right? Well, not really...
Before I describe the problem I'm having, here is a small example of my highlighting code for reference:
private DefaultStyledDocument doc = new DefaultStyledDocument();
private JTextPane txtTest = new JTextPane(doc);
private Random random = new Random();
private void appendLong() throws BadLocationException {
String str = "00 A9 10 20 20 50 10 39 69 FF F9 00 20 11 99 33 00 6E ";
int start = doc.getLength();
doc.insertString(doc.getLength(), str, null);
int end = doc.getLength();
txtTest.getHighlighter().addHighlight(start, end, new DefaultHighlighter.DefaultHighlightPainter(randomColor()));
private Color randomColor() {
int r = intRand(0, 255);
int g = intRand(0, 255);
int b = intRand(0, 255);
return new Color(r, g, b);
private int intRand(int low, int hi) {
return random.nextInt(hi - low + 1) + low;
}As you can see, what I'm trying to do is append a String to the JTextPane and highlight the new String with a random color (for testing). But this code doesn't work as expected. The first String works great, but every subsequent String I append seems to inherit the same highlight color as the first one. So with this code the entire document contents will be highlighted with the same color.
I can fix this problem by changing the insert line to this:
doc.insertString(doc.getLength()+1, str, null);With that change in place, every new String gets its own color and it all works great - except that now there's a newline character at the beginning of the document which creates a blank line at the top of the JTextPane and makes it look like I didn't process some of the incomming data.
I've tried in veign to hack that newline character away. For example:
if (doc.getLength() == 0) {
doc.insertString(doc.getLength(), str, null);
} else {
doc.insertString(doc.getLength()+1, str, null);
} But that causes the 2nd String to begin on a whole new line, instead of continuing on the first line like it should. All the subsequent appends work good though.
I've also tried:
txtTest.setText(txtTest.getText()+str);That makes all the text line up correctly, but then all the previous highlighting is lost. The only String that's ever highlighted is the last one.
I'm getting close to submitting a bug report on this, but I should see if anyone here can help first. Any ideas are much appreciated!It may work but it is nowhere near the correct
solution.It seems to me the "correct" solution would be for Sun to fix the issue, because it seems they are secretly inserting a newline character into my Document. Here's a compilable program that shows what I mean:
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.EventQueue;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.util.Random;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextPane;
import javax.swing.text.BadLocationException;
import javax.swing.text.DefaultHighlighter;
import javax.swing.text.DefaultStyledDocument;
public class TestFrame extends JFrame {
private JButton btnAppend = new JButton("Append");
private DefaultStyledDocument doc = new DefaultStyledDocument();
private JTextPane txtPane = new JTextPane(doc);
private Random random = new Random();
public TestFrame() {
setSize(640, 480);
setLocationRelativeTo(null);
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
dispose();
getContentPane().add(new JScrollPane(txtPane), BorderLayout.CENTER);
getContentPane().add(btnAppend, BorderLayout.SOUTH);
btnAppend.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
doBtnAppend();
private void doBtnAppend() {
try {
String str = "00 A9 10 20 20 50 10 39 69 FF F9 00 20 11 99 33 00 6E ";
int start = doc.getLength();
* This line causes all highlights to have the same color,
* but the text correctly starts on the first line.
doc.insertString(doc.getLength(), str, null);
* This line causes all highlights to have the correct
* (different) colors, but the text incorrectly starts
* on the 2nd line.
// doc.insertString(doc.getLength()+1, str, null);
* This if/else solution causes the 2nd appended text to
* incorrectly start on the 2nd line, instead of being
* concatinated with the existing text on the first line.
* (a newline character is somehow inserted after the first
* line)
// if (doc.getLength() == 0) {
// doc.insertString(doc.getLength(), str, null);
// } else {
// doc.insertString(doc.getLength()+1, str, null);
int end = doc.getLength();
txtPane.getHighlighter().addHighlight(start, end, new DefaultHighlighter.DefaultHighlightPainter(randomColor()));
} catch (BadLocationException e) {
e.printStackTrace();
public static void main(String[] args) {
EventQueue.invokeLater(new Runnable() {
public void run() {
new TestFrame().setVisible(true);
private Color randomColor() { return new Color(intRand(0, 255), intRand(0, 255), intRand(0, 255)); }
private int intRand(int low, int high) { return random.nextInt(high - low + 1) + low; }
}Try each of the document insert lines in the doBtnAppend method and watch what it does. (comment out the other 2 of course)
It wastes resources and is inefficient. A lot of work
goes on behind the scenes to create and populate a
Document.I tracked the start and end times in a thread loop to benchmark it, and most of the time the difference is 0 ms. When the document gets to about 7000 characters I start seeing delays on the order of 60 ms, but I'm stripping off text from the beginning to limit the max size to 10000. It might be worse on slower computers, but without a "correct" and working solution it's the best I can come up with. =) -
HT4059 Printing electronic notes and highlights in iBooks
I have made electronic notes and highlights from a uni boo (PDF), is it possible to print a copy of the notes I have made and sections I have highlighted? If so, how please? I do not have any air printers.
Just answered my own question:
I also had this question, and spent time puzzling over it. But here's the answer:
Open the relevant iBook
Click the icon that looks like a 3 line bullett list
Click on Notes
Click on the icon in the top right hand side that looks like a page with an up arrow pointing out of it.
Choose Edit Notes
Select the notes or highlights that you want printing (a tick appears in the circular radio button)
Click SHARE
Choose either Mail or Print
Voila -
I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Maybe you are looking for
-
So my iPhone had a broken screen and back for a while, which may have something to do with this. I mean like missing peices. I realize this leads to corrosion and I may have a broken iPhone but this is a really strange problem. It's always shuttin
-
I need to convert DWF files to PDF. Is this possible? Adobe able to batch them and can they be converted via a batch or scheduled process. We have a team placing DWF files on a network drive. Then we need to scoop them up and convert them. Using S
-
Apple architecture in a business environment
I'm setting up the IT for a new building that my business is moving to, and I want to know if implementing an Apple solution is suitable or not? And if so, what is the architecture design required? The mangling director and directors will each have a
-
Has anyone every used a highlight color printer? We would like to print from FrameMaker 9 to a pdf (or directly to the printer) with only our cautions and logos being one color (a company red) and the graphics (pics) to be grayscale. Is there anyway
-
Billing numbers based on CST & VAT for Invoice, Credit / Debit Memo's.
Hi All, We are doing implementation for an Indian Client and we came across one requirement which required some customization. The requirment is as follows. 1. We have defined all States as Storage locations and these location have assigned to one pl