Xcode 3.0 & Tiger Building Help

Hello,
I made a very simple Apple Script Studio application in Xcode 3.0 on leopard. The application has a few buttons, with a simple interface. I tested it on a Tiger machine and it doesn't work. It just bounces in the dock for a few seconds, then quits.
If I want to make my application Tiger compatible, do I have to erase Xcode 3.0 and switch back to 2.5?
Thank you!

You do not have to switch to Xcode 2.5 to write Tiger-compatible applications. You have to set the deployment target, which is the minimum OS version your application will run on, to Mac OS X 10.4.
1. Select the name of your project from the Groups and Files list.
2. Click the Info button in the project window toolbar to open the project's information panel.
3. Click the Build tab in the information panel.
4. A large list of build settings will appear. In the Deployment section, find the setting Mac OS X Deployment Target and change the setting to Mac OS X 10.4.

Similar Messages

ICal using Tiger/Panther Help?

iCal using Tiger/Panther Help?
I’m sure this is a stupid question but I’m trying to import my iCal info from home to work and back. I have Tiger at home and Panther at work, is there a simple way to import and export and update? I’ve tried thought email and had know luck, it comes thought as raw text. I’m sure there a simple way to do this! Thanks Scott F.

Henry,
Click on your selected calendar, then Click the Info button on the lower right side of the iCal Window, and the window which opens will allow you to change the color in the color window drop down menu which is located in the upper right hand corner of the Info Window.
Just drag them to change the order.
;~)

Need Xcode! Will take all help possible!

Hi. I am using Mac OS X 10.4.11 and want to make an application for macs using xcode. I have read through the other similar topics and i want to let you all know I HAVE ALREADY BEEN THOUGH THE APPLE DEVELOPERS CONNECTION website. Is there a link anyone could give me to download an older version of Xcode. Please help me I am desperate.
Thanx in advanced
Dino

Hi Dino, and a warm welcome to the forums!
Kappy is correct, you really nedd those Discs to legally run Tiger.
Login to Apple Developer and see if this helps...
http://www.dvhardware.net/software/10313

Installing Xsan 1.0 on a new tiger system - Help - Urgent

Here's my situation
I purchased a version 1.0 copy of Xsan.
I am trying to install it on a new dual 2.7 G5 with tiger installed.
It says I cannot do this because the version of xsan and tiger are not compatible.
Is there a way to do this, or am I screwed?
Thanks in advance for your help
DBK

Ok, first what's the version of Tiger? and who sold you a 1.0 version knowing that you were running Tiger? You will need the 1.2 version and then you'll need the 1.3 upgrade from apple.
Please take your time to plan the build of your Xsan and the deployment as well.
Poor planning with this type of software and hardware will come back to bite you!!!

New System Build Help

Video Editing Build
Premiere Pro & AE
Drive layout
C: SSD - OS and Programs
SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
D: 1TB - Projects/Scratch
Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
E: 3TB - Media (with offsite bachup)
Seagate Barracuda 7200.14 ST3000DM001 3TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
F: 250 GB - Exports
Western Digital WD VelociRaptor WD2500HHTZ 250GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
G: SSD - Global Cache (for After Effects)
SAMSUNG 840 Pro Series MZ-7PD128BW 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD)
NZXT Phantom PHAN-001RD Red Steel / Plastic ATX Full Tower Computer Case
ASUS Sabertooth X79 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
EVGA 04G-P4-3687-KR GeForce GTX 680 FTW+ w/Backplate 4GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
COOLER MASTER GX Series RS750-ACAAD3-US 750W ATX12V v2.31 SLI Ready 80 PLUS BRONZE Certified Active PFC Power Supply
2 CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model CMZ16GX3M2A1866C9
Microsoft Windows 7 Professional SP1 64-bit - OEM
CORSAIR Hydro Series H100i Water Cooler
Koutech IO-RCM630 Multi-in-1 USB 3.0 SuperSpeed Front Panel Internal Card Reader with USB 3.0 Port (3.5")
ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
Total $2912.83
Would have liked a raid 5 for media but the Asus X79 does not have enough Sata 6Gb/s the Asrock version has but does not have the SSD Caching port
which I think and hope will work well with the 2 SSD cards. 1 for the OS and the other for the Globel cache for AE (not set up as raid 0)
Maybe down the road I could add a seperate raid card to run 3 extra drives on a raid 5 ?
Any way I would love to your feed back from you guys before I pull the lever on this as all this jazz is pretty new to me. I have built a few systems in the past but
would like to get better on AE. Going this time for ease of performance and as little bottlenecks as I can and at the same time keeping it simple.
Cheers
Murph I am no expert as this
Found this on Adobe TV How to optimize AE for High Performance. It made the most sence to me.
http://www.youtube.com/watch?v=a4D9ScFcM3M

Update just wondering which disc setup would work best with my set up for the best performance ?
             ASUS Sabertooth X79
             Option 1
             C: OS and Program SAMSUNG 840 Pro                                                  (6Gb/s SSD caching sata)
             D: Projects/Scratch WD Black 2TB 7200                                                (6Gb/s sata)
             E:   Media. Seagate Barracuda 7200 3TB                                                   (6Gb/s sata)
             F:   Exports. WD VelociRaptor 250GB 10000 RPM                              (3Gb/s sata)
             G: SSD - Globel Cache (for After effects) SAMSUNG 840 Pro 120GB         (6Gb/s SSD caching sata)
             Option 2 ( pretty much the same as mellofell13, members setup)
             C: OS and Program SAMSUNG 840 Pro 256GB                                       (6Gb/s SSD caching sata)
             D: Media & Projects 2x Western Digital 1TB Caviar black Raid 0                (6Gb/s sata) Marvell
             E: Exports & previews. 2x Western Digital 1TB Caviar black Raid 0            (3Gb/s sata)
             F: temp files, media cache, Globel Cache (for After effects)
                  SAMSUNG 840 Pro 120GB                                                                (6Gb/s SSD caching sata)
            Just trying to make the final dicision on this any help would be greatly appreciated
            Thankyou

Mac went blitz while installing Tiger-please help!

I bought a Tiger OS X software cd off of Ebay. It is a grey cd that arrived in pristine condition, without scrathes, etc. According to the seller, it came from a mac training center. I am a mac rookie, and I know very little about macs. My only reason for upgrading was to be able to use the new ipod nano, which requires 10.4.8. I put the install cd into the computer, choose the language, clicked on the "install" button and a screen came up saying that the disk was dirty and the program could not install. I tried to take the cd out, however I could not. The only option I has was to restart the computer, which I did, but still, I could not take out the cd. Eventually the screen went completely grey with a small box in the middle, then it went blitz and showed jumbled typing in white letters with the same grey screen in the background. Does anyone know what I can do to fix this??? I appreciate any help. Thank you!!!

You probably need to format the drive and then install.
Have you backed up your data?
The other option is Disk Warrior, which everyone should own to keep the drive in good shape. http://www.alsoft.com/DiskWarrior/
Apple Utilities are OK, but DW's are superior.

Labview 2009 SP1 Installer build help needed

Hello,
First time posting here. I have a rather large project that I recently converted from Labview 7.0 to 9.0. I am able to build an executable and it starts up Ok but I don't know for sure if it works. Since I couldn't build an installer, I copied the folder containing the .exe onto the targeted machine and installed Labview Run-time Engine 2009 SP1. The executable then complains that it needs the full development version to work. I am not too worry about this part at the moment, but if you have any pointers, please go ahead and post them.
Ok, I have gone through a lot of posts on building and installer but it seems the one post that has something similar to what I experienced didn't get an answer. Here's the Build Errors from the pop-up dialog:
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_SetOtherProperties.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
*** Error: An internal tool or library returned an error. (Error code -21)
*** End Error Report
*** Error: Windows SDK function returned an error. (Error code -12)
*** End Error Report
The build log file has slightly more info:
    [LOG ON] Mon May 31 20:55:07 2010
<<<MDFConfig_SetDeveloperLanguage>>> Language id: 9
<<<MDFConfig_SetDistributionLanguage>>> Language id: 9
<<<MDFConfig_SetBuildDir>>> Build directory: C:\HardwareTest\XXX\Release\Installers\Lab Test Suite 4.2.9 Installer - XXX
<<<MDFConfig_SetBuildMode>>> Build mode: 1
    [NMDK BEGIN] Mon May 31 20:55:07 2010
     Building developer part
> Adding files to installer
<<<MDFBuildDevPart_SetFileNames>>>
<<<MDFBuildDevPart_SetDefaultInstallDir>>>
<<<MDFBuildDevPart_SetUpgradeInfo>>>
<<<MDFBuildDevPart_SetOtherProperties>>>
>
> **************
> *** Error: An internal tool or library returned an error. (Error code -21)
Error in MDF API function: _MDFBuildDevPart_SetOtherProperties
nmdkSetInformationalProperties returned error code 26024
> *** End Error Report
> **************
>
Adding product dependencies to developer part
>
> **************
> *** Error: Windows SDK function returned an error. (Error code -12)
Closing dist kit
***** About to begin MAXImportConfig:oMAXPartModifications...
No MAX import files specified - nothing to do - returning.
Error in MDF API function: _MDFBuildDevPart_Close
Error in MDF::BuildDeveloperPart::Close.
ERROR: Caught MSI Exception:
<Unable to format error record.>
MSI error code: 6
> *** End Error Report
> **************
>
    [LOG OFF] Mon May 31 20:55:07 2010
    [MDF END] Mon May 31 20:55:07 2010
     Closing MDF.
I realize that I should post my project file but I can't do that until tomorrow. From those 2 errors, can you tell me what the installer builder is looking for? I have gone through all my dependencies and they look Ok at the moment.
Thanks for you time.

Hi Celeb,
I had to help out on another project and finally only getting back to looking at this issue yesterday. As you suggested, I went ahead and created a new project and created new build specifications (exe and installer). I was able to properly build both items but won't be able to check out the executable til later this week.
I noticed one thing about the project that Labview produced after converting the old *.bld file to a project file.  With the converted project, Labview adds unexpected installer destination folders into WindowsFolder in the Installer/Source Files/Destination View. I thought I deleted them before but they seem to make it back (kinda hazy about this at this point).  My actual installer folder should only go into the WindowsVolume folder. Anyway, on the new build spec, since I don't manually add the installer folder into the WindowsFolder, nothing get populated there and the installer is able to build properly. This might have been the cause of my inability to build an installer with the converted project/build specs.
I hope NI could add in more details into the build error messages. As it is, it's really difficult to know why a build failed because there's no details in those messages.
Thanks again,
T.

Font problem in Tiger, please help!

For some reason in Mail and Address Book all my info is corrupt.
The word 'from' in Mail is in some condensed font and the copy that follows that is a sentence like a cat has walked over my keyboard. Basically loads of characters depicting the 'contact' etc has been replaced with something not disimilar to this 'dsndjnasdn djsnasodnsx nasdmadas'. Any answers that would help much appreciated.
I have tried to change the systems fonts etc but it still does this. All my contacts in Address Book are listed as a load of letters and numbers.
Answers?
iMac G5 Mac OS X (10.4.5)

Bankers,
Welcome to Apple Discussions.
I would recommend that you check out Font Management in Mac OS X Tiger and Panther, by Kurt Lang.
;~)

Xcode 2.5 (Tiger) download issue

I've been trying to download XCode 2.5 to do some development on my Tiger iMac... it downloads but it fails the checksum ("Verification failed" when it tries to mount). Is this a known situation? What are my options?

Can you download it again? (Maybe from another network)
Does your file have the correct size in bytes? (sometimes, for unknown reasons, the download ends but without downloading the full size of the file)
Mihalis.

How can build help file for right to left and non english language

hi erverybody, i have a big problem ,please help me
i creat a c# appliction with vs.net2005 and i want to write
help file for it .i need a software to creat help file for non
english language(such as persian or arabic) and right to left
support . i tried many helpware chm builder tools but each of them
made a problem .i dont know what to do .what is the best solution
for creating help files for right to left and non english languages
how can i build my help file with f1 helping ability .thank u
so much
Text

Hi Mr_Sia and welcome to the RH community.
You could try looking at the HAT Matrix. This is a comparison
of all the help tools around. Click
here to go to it.
RoboHelp itself, whilst it does support over 35 different languages
does not support Persian or Arabic.

Can't Launch Integration Builder, help me.

I downloaded Full ABAP Edition of SAP NetWeaver Sneak Preview and Trial, after install, I wanna develop XI-CONTENT, but cann't Launch Integration Builder, always open 'SapWorkDir' directory, but no error message showed, status bar print "starting browser...". And I did not using J2ee Server, only ABAP edition, of course J2SE 1.4.2.12 has been installed.
I do not known why , thanks for any help.
by the way I looked Syslog, there always a "Communications data: Service initialization failed" message each time I start NSP instance, but every things seems ok.

Hi,
Just adding on to what Michal said,
SDN has recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
But for XI we need both the Java and Abap stacks and not just having them individually, because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products and get a clear idea on the same:
http://www.howforge.com/news/sneap-prevew-sap-netweaver-04-sp15-java-abap
And incase you had installed XI or PI has Michal suggested then probably the solution provided by Ben will be useful..
I hope this clears your doubt....
Regards,
Abhy

X3 Project Stops Building - Help!

I'm back working in X3 - and it has been a few years. I have
been tasked with updating a help system created by another author
(and, of course I'm on a short deadline). When I try to build the
HTML project, Robo APPEARS to be building and tells me it has
completed, but the .CHM ends up being an empty file.
I'm getting the following warnings that will probably be
ridiculously easy for others, but I'm not catching the problem.
HHC3003: Warning:
setup_main.htm :
The HTML tag "td" has invalid characters appearing before the
closing angle bracket: ;
style="width:62px;" width="62px" class="hcp3"
She created a template to develop each page so this error
appears on several pages.
I'd appreciate any insight!
In addition to the error I mentioned before, I'm also
noticing the following behavior. I have recreated the project from
scratch twice, imported the topics, and was able to add a TOC and
still have the project continue building (including these files
with the "td" error). But each time when I tried to add an Index,
the project stopped building.
Are there service packs I'm missing? Could I have something
set wrong in the project?
I really appreciate any help that anyone can provide!
Thanks.
Liz

Ok well as I said I have not been using the software for long so I do not know if this was an easy fix or not, so I wasn't sure if all that information would be relevant, so forgive me. Here is the information you might need:
Computer Specs:
CPU: Intel Core i7 4790K
Motherboard: Gigabyte Z97X
RAM: 8GB
Graphics: NVIDIA GeForce GTX 770
OS: Windows 7
Version of AE: CS6 (11.0.0.378)
Composition Settings:
http://i.cubeupload.com/k0bjpz.png
Render Settings:
http://i.cubeupload.com/TX2snP.png
General Screenshot:
http://i.cubeupload.com/C1LT6M.png
Preferences:
http://i.cubeupload.com/de1Ftq.png
These may be the layers causing me issues:
http://i.cubeupload.com/250mZn.png

Dmake is very very slow in our builds (HELP please!!!)

We use dmake (with makedepend) in our builds and our build time for the entire system is extremely slow (it takes 17+ hours to do a clean build).
Could anybody suggest a solution or remedy to help us reduce the long build times.
We use solaris 2.6 with Forte 6.0 C++. Our sources are mounted on a shared filesystem/disk and they are not local to where the build happens.
Any help in this regard is highly appreciated.
Thanks.

Your build server has 2 CPUs, so it makes sense to use
dmake in parallel mode instead of make. I'm responsible
enginerr for both, make and dmake, and I can say that
they are compatible. People, who don't care about the
build time, can use any of them. People, who cares about
build time, should use 'dmake -m parallel -j 8' if they have
only 2 CPUs.
Of course each build can have some specific, but in
general it makes sense to allow 4xN parallel jobs (where
N is the number of CPUs). Also there is an ability to run
this build on several build servers (see 'man dmake' for
details about the build in distributed mode), or to run this
build in "grid" mode, but first of all you have to make sure
it works in parallel mode.
So I suggest you to try the following experiment:
1. Replace "make" with "$(MAKE)" in makefiles
2. Run build with "time dmake -m parallel -j 8 ..."
If you see that "user"+"sys" time is twice bigger than the
"real" on a 2 CPU system, this is the best result this
build can show. If "user"+"sys" is less than the "real"
time, there is a room for imrovement.
Please, let me know the results.
Thanks,
Nik

Reset/change password error - cannot log in to builder - HELP!

I'm encountering the same problem I described some time ago here: Reset/change password error - cannot log in to builder
Briefly, the builder tells me I must change my password. When I attempt to do so, the password change page displays a null username, and tells me that my existing password is invalid. The same password failure occurs using the new password emailed to me by the "Rest password" function.
I've cleared my browser cache, closed the browser, rebooted my client (WinXP), to no avail.
Anyone able to help?
Thanks
jd

Update:
Workaround: log in using a different client machine.
Scary.
It looks the same problem reported, without response, here: Apex.oracle.com SaaS Login - Must Change Password.
jd

Query Builder Help - Joins

Can anyone point me in the right direction for doing joins in query builder?
Thanks!
Brian
[email protected]

Click on the left side of the screen at the
arrow. Type in the where clause without
actually typing in "where". You can actually include the columns in the where clause by checking on the columns in the tables present on the right side. Once you are done, press ENTER.
You are done creating where clause. You can look at the SQL it created for you by clicking on the menu button called "show SQL".
Hope that helps,
Oracle University Instructor.
P.S: If you attend one of our reports or forms - I class we teach this in class. Moreover, the course material we give out has a complete section on Report Builder.
Go to http:\\education.oracle.com for more info on class info.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Brian Burk ([email protected]):
Can anyone point me in the right direction for doing joins in query builder?
Thanks!
Brian
[email protected]<HR></BLOCKQUOTE>
null

Xcode 3.0 & Tiger Building Help

Similar Messages

Maybe you are looking for