XDP data transfer not working

Our process involves filling out a submission form, sending the data to the approval form, and then viewing that approval form. Essentially a simple submission and approval workflow.
When we export the XML of the approval form to see what data was passed in the schema, we see two sets of the XML. One is a bunch of empty nodes, except for the nodes tied to the process fields that show the connection with the approval form. The other set of nodes is an exact copy, only it contains the data, including the process field nodes that show it is from the submission form.
When one machine (running Acrobat 9 Pro) runs the process through Workspace, it works fine. When we export his approval form XML, we see that the first set of schema XML has the data. Because of this, the form can read it, populate itself, and everything is fine. It ignores the second set of nodes. When anyone on an a machine tries it using Acrobat 8.1 Pro the form does not load with the data. The exported XML shows that the first set of nodes is empty and the second has the data...so Acrobat can't find it.
Our setValue component that is supposed to transfer the data is set to (could this be an issue?)...
Location: process_data/ApprovalForm/object/data
Expression: process_data/SubmissionForm/object/data
Our requirements state that 8.1 has to work, so does anyone have any recommendations? Why is the XML getting doubled? Would the version of Acrobat change how Workspace functions? Thank you for any help you can provide us!

I think the issue is with your set value. I think you are making a copy of the data from one form var and copying it and not overwriting the other one. You will need to get down to a single data node and not 2. I am not an expert at xPath but if your expression was:
process_data/SubmissionForm/object/data/*
Then that would copy all nodes below the data node into the Location node. Or you could leave the expression the way it is and change the location to be process_data/SubmissionForm/object. I believe that woudl overwrite the data node in the location.

Similar Messages

  • Firewire  data transfer not working

    I just bought a new intel based i mac (running OX 10.5) and I want to transfer music/i tune purchasced music and some other files from my old mac (i mac G4 running OX 3.9) I connect the firewire between the two as prompted and restart the old computer holding down the "t" key one of two things happens I get an error (on the new mac) stating that I may not be able to use firewire to transfer or nothing..the old computer restarts as it would had I not been holding down the t key. I did it in reverse just to see what would happen and the new computer indeed started up with the firewire symbol bouncing around the screen.
    Thank you in advance
    intel based i mac

    Did you follow this procedure? How to Use Firewire Target Disk Mode
    http://docs.info.apple.com/article.html?artnum=58583
     Cheers, Tom

  • ALE HR Data transfer not working

    I am trying to do a PFAL for message type HRMD_ABA.
    If I run without specifying anything, that is run for all infotypes as defined in the distribution model,
    then in the target system, most the the infotypes fail.
    but if I specify an Object type and an object ID, and run one by one, it is successful.
    What can be the possible cause?
    It is not possible to run one by one for every object.
    Any clues please?

    Hi Shweta,
    First you will  resend the data in order of  O,S,P,C,CP for STAP2 and then STAP1 ( i expect you would be doing it by creating Variants by entering data through transaction PFAL and scheduling a background job for all the variants).
    After that trace the idocs for that job through BD87 by giving start time and end time of job in sending system, from there you will find corresponding inbound idocs and thier status.
    Now send only data of  failed idocs or partially posted idocs (status 51 or 52) by following same procedure( collect the data of failed idocs through table EDIDS) through transaction PFAL only, you need not send all the data again. There is no seperate transaction, but you will be using same transaction for sending failed data again.
    Note only 52 status data can be posted sucessfully by sending again and again, for 51 status idocs first you need to correct data then send.
    Please let me know if am not clear on any point.
    Regards
    Vinod

  • Monthly Budget data transfer not working

    I am creating a personal budget using Numbers' "Monthly Budget" template, and the categories I'm entering on the Budget page are not transferring to the dropbox on the Transactions page.  I have tried shutting down and restarting the application, but I still can't select the appropriate categories for my Transactions because they aren't transferring over form where I've entered them on the Budget table.  What should I do?

    the categories I'm entering on the Budget page are not transferring to the dropbox on the Transactions page.
    The categories won't "transfer" automatically.  You need to go to the Category column in the table on the Transactions sheet, select the cells in the body of that column, choose Format > Cell and add the new category names you are using by clicking the + button:
    The spelling there has to be exactly the same as the spelling you use for that category in the table on the Budget sheet.
    SG

  • 6301 & PC Suite - "Data transfer not possible. Che...

    Well, as the title says really.
    Upgraded from 6280 -> 6301.
    I use Outlook 2003 and sync contacts & calendar.
    Sync'd the 6280 before finalising upgrade, plugged in the 6301 with a mini-usb cable (All driver reports it installed new hardware fine) once it had fully come into service and it wouldn't sync.
    The phone displays "Data transfer not possible. Check connection" and Nokia PC Sync shows the warning "The mobile phone as not responded". It's solution is "Please ensure your phone is in the standby mode, then restart the Synchronisation. "
    Have updated to latest version of PC Suite 6.85.
    A bit annoying, as I no longer have any contacts info on the new phone...
    Running XP, AMD 3ghz, 4gb ram.

    Having spent many hours on this I have now got it working...
    This is how :
    1. On the phone go to : Settings: Sync and Backup: Server Sync: PC Syncronisation and enter a username and password.
    2. Select Synchronise in Nokia PC Suite, in the Connected to 6301 window click the spanner (settings) icon. Now click the Adjustable wrench (Advanced) Icon and go to the sync profile tab and enter the same username and password that you used on the phone. Click OK twice and sync away...
    Message Edited by kage64 on 05-May-2008 11:04 PM

  • PC Suite 7 – Data transfer not possible. Check dat...

    When I try to use (open, update, modify etc.) the “contacts list” in PC suite version 7.0.7, I always have the following error: “Data transfer not possible. Check data connection”. Instead the SMS list works fine. My phone is Nokia 6267.
    Anyone has a solution?
    Best Regards
    Bix123

    Hi everyone,
    I had the same problem for months with many PC Suite versions & both XP service packs until I tried a phone setting just for testing and everything worked out fine In my phone (3110c) under Settings / Connectivity / Data Transfer / PC Sync, I filled in a random User name & Password and voila!!! All contacts copied just fine!!! I hope this works with other models with the same menu as well. It looks that it's not a PC Suite problem after all (at least for me that is).
    Hope I helped you guys
    Spiros
    Greece

  • 3120 classic won't sync - "Data transfer not possi...

    The phone is Three-branded (UK), software version 07.16 and no software updates are available. I'm using PC Suite 7.0.7.0.
    I am connecting my phone with Bluetooth - I don't have a data cable. The phone is new so has no data on it.
    Whatever I select to sync (from MS Outlook), the phone says "Data transfer not possible" and I get a "PC Sync information" error. I've tried selecting unidirectional data transfer to the phone, as someone suggested this in another thread, but it makes no difference.
    I also tried using OpenSync under Linux and the phone displayed the same error. (I did a factory reset after using OpenSync in case it confused the phone.)
    Any ideas, please?

    Hey there,
    I had exactly the same problem and I just worked around it by giving my sync a username and password.
    That is, in Settings->Sync and Backup->Server Sync->PC Sync I set a username and password. I then entered this information in PC Suite under Advanced Settings->Sync Profile
    Hope this works for you, I understand your frustration.
    Chris

  • 6300: Unable to sync contacts: "Data transfer not ...

    Hello,
    I'm unable to syncronize contacts between my new Nokia 6300 and a computer.
    What works:
    * Pairing the device
    * File copy to/from phone via Bluetooth / USB.
    * Manually adding new entries using the handset keypad.
    What doesn't work:
    * Synchronising contact details between the 6300 and the Windows
    Address Book.
    - Fails when using Bluetooth, Mini-USB cable.
    - Fails on two different machines; one Lenovo R60e Thinkpad,
    one self-built desktop /w a USB Belkin Bluetooth adapator.
    I've been trying to work around this problem for a few days now and
    running out of ideas. Neither Google nor the Nokia FAQs showed any
    obvious solutions.
    Any and all assistance gratefully appreciated!
    Steps to reproduce:
    ===================
    * Connect phone to machine:
    - Either by plugging into USB, and selecting 'Nokia mode' on
    the handset, or
    - Pairing with the host computer via Bluetooth.
    - Note: No username or password is set under
    "PC Synchronisation" on the handset.
    * Load PC Suite.
    - Select "Synchronise".
    - Nokia PC Sync loads.
    * Click "Select Phone".
    - Check that the phone appears in the list of connected devices.
    - Select "OK".
    * Select "Settings".
    * Select "Create new settings".
    - Configuration Wizard appears.
    - Select "Outlook Express (Windows Address Book)"; press "Next".
    - Tick "Contact Items"; press "Next".
    - Select "Synchronise the Default Windows Address Book"; press "Next".
    * Select "Synchronise Now".
    - Status messages read:
    "Connecting to Wisp..." (Wisp is the name of the handset.)
    "Waiting for Wisp..."
    "Opening Databases..."
    "Reading Outlook Express..."
    "Synchronisation Completed"
    - 2 warnings reported.
    - Synchronisation process lasts a couple of seconds.
    - Progress bar only ever reaches the 50% mark.
    Failure mode:
    =============
    Handset displays the following messages:
    "Data transfer not possible"
    Then:
    "Synchronisation info:
    Contacts: Incomplete.
    Unable to process all items.
    0 sent. 0 received.
    Contacts updated on other device:
    New: 0 Removed: 0 Updated: 0
    Contacts updated on my phone:
    New: 0 Removed: 0: Updated: 0"
    PC Sync report:
    Under "PC Sync information":
    - "PC Sync has encountered a problem and has
    terminated the synchronisation."
    Under "Warnings (2)":
    - The following warnings were produced during the synchronisation:
    The Synchronisation has been Terminated!
    PC Sync information.
    Under "The Synchronisation has been Terminated!":
    - PC Sync could not update the data to the mobile phone.
    Under "PC Sync information.":
    - PC Sync has encountered a problem and has terminated the
    synchronisation.
    Troubleshooting attempts
    ========================
    * As mentioned, attempted running the PC Suite software on two
    different hosts - no change.
    * As mentioned, attempted using both Bluetooth and USB
    connections - no change.
    * Attempted a "Reset to Factory Settings" on the
    handset - no change.
    * Attempted erasing both the Windows Address Book contents, so
    that both data sources were empty - no change.
    Version information
    ===================
    Laptop
    Operating System:
    Windows XP SP2 (32-bit)
    Build 2600
    PC Suite version:
    Nokia PC Suite 6.83.14.1
    Connectivity Cable Drivers:
    Version 6.83.9.0
    PC Connectivity Solution:
    Version 7.7.10.0
    Bluetooth stack:
    WIDCOMM Bluetooth stack
    Version 5.0.1
    Build 1500
    (Note: Other test host is running same OS, PCS version.)
    Handset
    Firmware version:
    V 04.70 (24-01-07) / RM-217
    Memory in use:
    Phone

    with my NOKIA 6233 I have exactly the same problem. I have not been able to spend much time on searching solutions, yet. I did, however, install the firmware update - this did not solve the problem unfortunately.
    Hi misternik,
    From looking on Nokia's support site and elsewhere, I already appear to be running the latest firmware revision available for this handset.
    However, further Googling indicates that there are two different engineering codes that can be used to reset a phone:
    *#7780# - Normal reset. (Replace all configuration files with default entries.)
    *#7370# - Performs a deep reset. (Reformat main memory and restore from firmware.)
    I'm not sure which mode the standard menu entry triggers; I might have a go running a deep reset to see if that clears the fault.
    In several contributions to this forum (but for other phones) I read something about a PC-suite mode on the phone. I do not have this mode. When I connect the USB cable I can only choose between DEFAULT, PRINTING and DATA STORAGE. Should there be a PC Suite mode ? Maybe this is related to the problem ?
    The 6300 handset presents a menu when first connected via a USB cable, and offers those options - "Nokia mode", "Printing mode", "Storage mode", or similar.
    Nokia mode appears to provide all of the Nokia-specific facilities, such as PC Suite synchronisation, so I don't think that's the problem.
    Cheers,
    David

  • 5310 "Data transfer not possible" calendar sync is...

    I'm trying to get my Nokia 5310 to synchronise its calendar with my work's Outlook 2003, using PC Suite 7.1.26.1.  At work they use Windows XP and Outlook 2003 SP2.  I don't want to bring my USB cable into work, so I'm using bluetooth to connect.  The connection itself works fine - I can browse the 5310's media content, calendar and contacts using my computer.
    The problem is with synchronising calendar with Outlook.  It just won't do it.  Every time, I get a "Data transfer not possible.  Check data connection" message on the phone and a "PC Sync was unable to locate your Outlook message store" error in the PC Suite sync log.
    Things I have tried:
    Repair PC Suite.
    Install new settings (spanner star button) and go through the wizard again.
    As 2, but with manually selecting the Outlook folders on my profile (which were, in any case, already preselected correctly).
    Copying a new profile and trying to sync with that.
    Putting in (the same) username/password in PC Suite and the phone's "sync and backup" option.
    None of these works.  My work computer will happily sync with Google calendars, but won't sync with my phone.
    I've had a good look through the forums but can't seem to find any solutions that work for me.  Does anyone have any ideas of how I can get this to work?

    Try one more thing. This worked for me.
    1. Remove ALL email profiles.  -
    2. Recreate profile - don't forget to write down your Email exchanger server address. This will force Microsoft outlook to startup as if your  a new user but will load your existing email from the server.
    3. Setup PC Sync -- again
    - this has been a pain in the neck!! - something gets corrupted in the profile that PC Sync does not like.

  • DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

    Hi Expert,
    I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working. 
    I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
    Wish to hear goods news ASAP .
    Thank you.
    Joan.

    Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
    Value Date code in the above abap
            IF PAR_VALD = 'X'.
              MOVE C2-VALDT TO HLP_VALDT.  "  VALUE DATE
             write hlp_valdt to umsatz-budat dd/mm/yy.
            ELSE.
              MOVE C8-BALDT TO HLP_BALDT.
              MOVE HLP_BALDT TO HLP_VALDT.
            write hlp_valdt to umsatz-budat dd/mm/yy.
            ENDIF.
               MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
               MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
               MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
    Regards
    Anurag
    Message was edited by: Anurag Bankley

  • Data transfer not possible? Nokia 2700 classic syn...

    I have Ovi setting on my 2700 classic, everytime i try to sync contacts - the prompt comes like "data transfer not possible". Help me with it also plz tell me any way of getting contacts back on phone/sim from ovi without PC. Addl. Info:- i had syncd the phone successfully on gprs without pc and i am so hoping that their must be some way out. Thanks

    I am also having the same problem. I am using Nokia 7210. Please help me

  • The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    Hi there,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Additionally, you may want to try completely disabling and re-enabling restrictions.
    -Griff W.

  • Data Transfer Not Up-To-Date  and To Be Archived at Project definition ?

    Hi All,
    I want to know about the statuses "Data Transfer Not Up-To-Date and To Be Archived at Project definition level?" In documentation Flagged for Transfer  and  To Assign are only mentioned.
    Thanks and Regards,
    Arti.

    Hello Arti,
    the system sets this status when there is a problem with the replication. For example, in the customizing of your project type (accounting area) you have defined the type of transfer as 'Automatic as of release of project'.
    Now, for example, you have a project that has status 'Created - Transferred - Data Transfer Not Up-To-Date - Assigned', this means that the replication is not yet complete because according to the customizing setting you need to release the project first.
    Hope this helps!
    Best regards,
    Silvia

  • Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Are you in an area where there is no coverage?
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help, then yOu'll need to contact Sprint again.

  • HT1976 my cellular data is not working , how do i fix it

    my cellular data is not working
    when i turn it on it doesnt show
    but ym wirless network works
    i need help.
    thanks

    My cellular data stopped working when i update my iphone 5c to ios7.1 any help please

Maybe you are looking for