Xerox workcentre 7225 print driver fails while searching for networked printer

HelloJoe,Thanks - So I took those steps and the printer is created as a local printer using a TCP/IP port with the proper IP address for that printer. It appears I can get to its property pages. But when I try to print, the job goes to the queue and it just hangs eventually timing out and it shows error for printing that document... I can ping the IP adddress from the PC and it returns pings. ? 

This unit is working fine from several other PCs, WIN 7 and WIN XP, in the building. Installing on a WIN7 64 bit PC. During the installation it starts to look for the networked printer and stops, posting the message -  [ Xerox windows common installer has stopped ] , then installer just hangs. I have uninstalled and tried the following versions with the same error -  Date: 2 Jun, 2014Version: 5.351.8.0.0Size: 17.7 MBFormat: EXEand tried  Global Print driver  Date: 15 Dec, 2014Version: 5.404.8.0Format: WWW NOTE - I even tried a manual driver installation which appears to work but the printer fails to print - returning a print error and cancels the job. Help,Jim  

Similar Messages

  • Officejet 6700 error while searching for updates: 'Printer could not connect to server'

    I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
    The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
    Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
    Thanks for any help!

    What is the IP address of the printer?  What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date? 
    I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on.  After you have both pieces of equipment back on and functioning attempt to connect to web services again.
    If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of  a browser on a computer. 
    Once that computer displays that page click on the Network tab.
    Then look in the column to the left and find the Wireless section
    Click on IPv4
    Then on that page look at the 2nd section that is labeled DNS Address configuration
    Change the radio button to the manual option
    Then for the manual preferred fill it out and make sure it reads 8.8.8.8
    Secondary should be set to 8.8.4.4
    Then hit Apply
    Read the next screen carefully. That message with the "OK" button below it  is one that states to click that button to undo the changes you  just made.  Just navigate away from that page by clicking on another tab.
    Then reattempt to connect to web services.  
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac.  Any suggestions?

    I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility.  Any suggestions?

    Is the computer in you equipment line:
    Dual Core Intel Xenon
    (which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
    If a Mac Pro, their forums are here:
    Mac Pro
    and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
    If you really have a pre-2005 PowerMac, read on.
    If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
    The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
    Get a powered USB hub (has its own power brick
    Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    The second gets power from two USB ports on the computer and often that's enough.
    Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

  • Failed while scanning for CD/DVD drives, error 2355

    Failed while scanning for CD / DVD drives, error 2355.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    As far as I know I do NOT have a virtual drive on this pc.
    Any help???

    Failed while scanning for CD / DVD drives, error 2355.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    As far as I know I do NOT have a virtual drive on this pc.
    Any help???

  • Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

    Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                        Invalid lower filters registry value.
                                                                                                                                        Failed while scanning for CD/DVD drives, error 2500
    Please help.

    That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer".  I set up the printer on the computer and it is connected to the wireless network.

    I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

    Try resetting your Mac's printing system as shown here:
    http://support.apple.com/kb/PH14141

  • Installing a windows 7 (64 bit) printer driver to existing windows xp network

    Dear-Users......... i have connected 5 computers through a switch and ( hp laserjet 2014) printer is directly connected to one of them and shared on the network.  3 computers running on windows xp and one i added last time it was windows 7 (32 bit)
    it is working good as well. the problem now i am facing is this today i tried to add one more windows 7 (64 bit) pc to this network. now this computer  can't access the printer. i have installed the printer driver on the pc but its not finding he printer
    on network ......my pc is sharing other network resources the problem is not of connection its connected to the network just printer driver is making problem for me.........any suggestion....i tried to install this 64 bit printer diriver on the printer server
    computer as additional driver .....but it does not worksssss.......what should i do.......thxxxxx

    So this issue is that your newly Windows 7 doesn't detect the shared printer, are you able to add this printer manually? Type "Add a printer" in start button\search box, then in the Add printer Wizard, select
    Add a network, wireless or Bluetooth printer, Choose a network printer...
    And make sure the network is working correctly and the computer where the printer is plugged in is turned on.
    Yolanda Zhu
    TechNet Community Support

  • The following error occured while searching for on-premises exchange server

    I've previously posted this under the Exchange Forums - Exchange Server 2010
    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Larry
    I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
    or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

  • Error while searching for Business Partner in Web UI

    Hi,
    While searching for the Business Partner in Web UI either by First Name, last name or Account ID, we are getting following error:
    Cannot display view BSPWD_BASICS/ErrorView2 of Component CRM_UI_Frame
    An exception has occured
    Exception class: CX_BOL_EXCEPTION - Access previously deleted Entity
    Method: CL_CRM_BOL_ENTITY=>GET_ROOT
    Source Text Row: 12
    When the business partner blind search is given (i.e. by entering *), all the business partners get displayed without any problem.
    Also, this problem occurs only for some business partners and NOT ALL.
    This problem, has also been observed sometimes when an IBase entry is created in the background.
    We are not quite sure whether notes, 135814 & 1515327 will help us in this regard, as the root cause is still unknown.
    Could anyone suggest possible causes and solution for the same. We are on CRM 7, using the standard business role.
    Thank you in advance.
    Regards,
    Chhaya

    Hi Shiromani,
    We have observed that this problem is peculiar with the data records attached to IBase ONLY. It means, if we process them further e.g. create a contract for the Business Partner after attaching the IBase, this problem doesnt occur. Then we are able to search the BP without any error.
    In short, when an IBase is created for a BP, and if a search is given for such BP, the error given in the first thread occurs, But when an IBase is created and immediately after that a contract is attached to the BP, and if a search is given for such BP, then there is no error.
    We are still further investigating the root cause. But any suggestion/inputs are welcome.
    Thank you.
    Regards,
    Chhaya

  • Change detector failed while scanning for changes to type User

    I'm receiving lots of system log warnings in IdM.
    These warnings are not bound to any particular action in IdM, they just do appear while IdM is on.
    Almost one warning per one second.
    Change detector failed while scanning for changes to type Server
    Change detector failed while scanning for changes to type UserForm
    Change detector failed while scanning for changes to type User
    Change detector failed while scanning for changes to type Resource
    SysLog detail:
    Timestamp 123
    Event
    Server server11
    Severity Warning
    Component Repository
    Error Code OCDT00
    Message Change detector failed while scanning for changes to type User
    Reported cause java.lang.NullPointerException
    java.lang.NullPointerException
    at com.waveset.repository.ObjectChange.equals(ObjectChange.java:112)
    at java.util.HashMap.eq(HashMap.java:299)
    at java.util.HashMap.containsKey(HashMap.java:381)
    at java.util.HashSet.contains(HashSet.java:182)
    at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.dispatchChanges(ObjectChangeManager.java:398)
    at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.run(ObjectChangeManager.java:314)
    at java.util.TimerThread.mainLoop(Timer.java:512)
    at java.util.TimerThread.run(Timer.java:462)

    same here, just deployed 8.1 with oracle as db. It results in syslog table growing into 10+G and still growing.
    wonder if there are others who are seeing this.
    my "syslog -d 1" output looks like this...
    2009-12-02 04:52:55.972 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Account
    2009-12-02 04:53:06.400 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Server
    2009-12-02 04:53:06.578 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type User
    2009-12-02 04:53:06.914 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Account
    2009-12-02 04:53:17.479 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Server
    C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.18\webapps\ims\bin
    lh syslog -d 1

  • I use an iMac running V. 10.10.2.  I have an Epson WP-4530 printer.  Is there a printer driver that will enable one to print photos from color negatives?

    I use an iMac running V. 10.10.2.  I have an Epson WP-4530 printer.  Is there a printer driver that will enable one to print photos from color negatives?
    I have already tried downloading the drivers from Epson as per one person's suggestions, but the dialog box isn't anything like what was suggested--the choices in the box weren't the same for the most part.  I don't want to lock up the computer or disable the printer for normal printing, but I have a lot of old negatives that I would love to have prints from.

    I am using the latest software from Epson for Mac OS 10.10.2 that I downloaded last week.  I seem to remember that the older software (we're talking 6-8 years ago) had to option to scan slides or negatives and would convert the results into positives via the scanner.  I don't like the most recent scanning software because it jumps right into the scan before giving you a chance to change the options.  It uses the selected options from the previous scan which are sometimes right, sometimes wrong.  Thanks for your reply to my question!

  • Cancel button functionality does not work--- while searching for G/l Acc

    HI SAP SRM Gurus,
    This is regarding an issue faced by the end user.
    For information my client is on WAS 6.4 Patch Level 155, SRM 4.0, EBP 5.0, SRM Server 5.0.
    In account assignment details..while searching for G/l account for the Account Assignment used at the time of creation of the shopping cart, if no G/l account is found, the ‘Cancel’ button functionality provided, does not work, however when
    G/l account(s) is/are found, then the ‘Cancel’ button functionality
    works properly.
    Kindly assist.
    Awaiting your reply in this regard.
    Thanks in advance
    Ankur

    Hi,
    Sound like a bug.
    Did you open an OSS ticket ?
    Kind regards,
    Yann

  • Fault tolerance for network printing

    What options are available to provide fault tolerance for network printing?  Currently, all our shared printers are on ServerA.  Is it possible to have similar shared printers on ServerB and have the clients automatically switch to Server B if
    Server A became unavailable?  We don't care about load balancing as much as fault tolerance.  Thanks to all who post!

    A failover cluster node ? (not in nlb;
    Servers in a Network Load Balancing (NLB) failover cluster cannot be used as print servers in Windows Server 2008 )
    For environments that require high availability, you can use a failover cluster as a print server.  If a node in the cluster fails, all print functionality will fail over to the next node in the cluster.  To improve failover times, we recommend
    that the administrator for the cluster force failover to each node when new print drivers are installed on the server.  During a failover, the driver installation is forced to occur on the active node.  The installation of the driver on each node
    can require several minutes. Forcing this installation process during maintenance will make sure that any unplanned failovers during usual operation will be very quick, because the drivers will already be installed on each node.
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • My ipad is constantly searching for network.

    My iPad is constantly searching for network. I am on EE and it will not connect. I've took the sim out and still no joy!

    The sim card is for 3/4G, not wifi.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS4611 I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also after 3 meters away it keeps searching for network! It is the second try and the same issue. Will Apple ever come up with a solution?

    I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also, after 3 meters away from the rooter it keeps searching for network! It is the second try and the same issues. Will Apple ever come up with a solution? There is a program pack for the connection issue but I cannot believe that this computer wifi keeps connected only while nearby the rooter!

    Applied this update?
    http://support.apple.com/kb/TS4611?viewlocale=en_US&locale=en_US
    If the update is installed aready, you may have to wait until OS X 10.8.5
    update if and when it is relased.
    Best.

Maybe you are looking for

  • Adobe AIR 3.9 beta sdk&compiler with ios 7 for windows download broken

    Hi, I couldn't download: Download AIR 3.9 SDK & Compiler for Windows - with iOS7 support (ZIP, 204 MB) from http://labs.adobe.com/downloads/air.html The download gets to about 56mb or so and then cuts out. All other downloads work fine, just this one

  • Firewire...I've never had so much trouble.....

    I'm a big researcher when it comes to buying things, in fact I drive myself crazy trying not to waste money on stuff that wont work. I've never had so much trouble in my life until I started researching a new laptop for audio work. I don't want to bu

  • Translate string using hex(0020) in Unicode system.

    Hello all, We are facing a problem of the "translate" statement in the Unicode system. The original statement goes as follows: TRANSLATE BULOG USING WS_STRING1. Here  BULOG is a structure and ws_string1 is declared as follows: DATA : ws_string1(2) ty

  • Nokia 5610 - the lights are singeing from time to

    Hi On mi Nokia 5610 , the lights are singeing from time to time At the attached doc file , the lights are marked with blue arrows Question 1 : Why does the lights are singeing ? Question 2 :How can I stop it ? thanks in advanced

  • Error installing (Windows) - FolderLock

    When i am installing something of adobe like photoshop or dreamwear this error come and i have to shutdown my pc than i never face this proble befor i try photoshop cs2,cs3,cs5 and same problem when 70 or 80% installing complete than this come on my