"xorg-fonts-alias" is not in the package set
I was trying to install xorg onto an arch box, ran pacman -S xorg; it gave me 22M of files to install, I told it yes, and it started spraying errors about files not found, file sizes not found, something like that.
I tried a couple more times and it finally downloaded the files, but then complained that a couple files were corrupt.
I went to /var/lib/pacman/current and deleted the entries for those files.
Now when I try to install xorg, it tells me that it cannot resolve dependencies for xorg-fonts-misc, because xorg-fonts-alias is not in the package set. If I try to pacman -S xorg-fonts-alias, I get an error that it isn't found in the sync db
How do I fix whatever I broke?
I would probably try cleaning out my cache, and then forcing the stuff that is complaining (depending on what the errors are of course):
$ sudo pacman -Scc
$ suco pacman -Syuf
Similar Messages
-
Db4.1 needs gcc-libs which is not in the package set
sudo pacman -Syu
:: Synchronizing package databases...
current is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
warning: openal: forcing upgrade to version 0.0.8-4
resolving dependencies...
error: cannot resolve dependencies for "db4.1" ("gcc-libs" is not in the package set)
error: failed to prepare transaction (could not satisfy dependencies)
:: db4.1 requires gcc-libs
What to do?
I cannot simply remove it.
Last edited by corrupt (2007-09-21 18:26:49)after sudo sed -i -e 's|current|core|g' /etc/pacman.conf
sudo pacman -Syu
:: Synchronizing package databases...
error: failed to synchronize core:
extra 325.7K 415.6K/s 00:00:01 [#####################] 100%
community 300.4K 435.7K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
warning: openal: forcing upgrade to version 0.0.8-4
resolving dependencies...
error: cannot resolve dependencies for "aspell" ("gcc-libs" is not in the package set)
error: failed to prepare transaction (could not satisfy dependencies)
:: aspell requires gcc-libs
Last edited by corrupt (2007-09-22 13:47:06) -
Pacman complains with `"gcc-libs" is not in the package set` message
Hi,
today I wanted to do full system upgrade, but this happened:
# pacman -Syu
:: Synchronizing package databases...
current 69,7K 84,9K/s 00:00:01 [#################################################] 100%
extra 323,1K 17,5K/s 00:00:18 [#################################################] 100%
community 312,4K 219,0K/s 00:00:01 [#################################################] 100%
:: Starting full system upgrade...
:: Replace scrollkeeper with extra/rarian? [Y/n]
warning: apr: forcing upgrade to version 1.2.9-1
warning: dnsutils: forcing upgrade to version 9.4.1_P1-2
warning: ruby: forcing upgrade to version 1.8.6_p36-3
warning: sudo: forcing upgrade to version 1.6.9p4-1
warning: xpdf: forcing upgrade to version 3.02_pl1-1
resolving dependencies...
error: cannot resolve dependencies for "rarian" ("gcc-libs" is not in the package set)
error: failed to prepare transaction (could not satisfy dependencies)
:: rarian requires gcc-libs
It's obvious that gcc-libs package is missing in current package. I've found one similar problem here http://bbs.archlinux.org/viewtopic.php?pid=283439. But I cannot solve it like that. I have current file included in /etc/pacman.conf already. I've also tried to change current to core and make the /etc/pacman.d/core file and it complained too:
# pacman -Su
:: Starting full system upgrade...
:: Replace util-linux with current/util-linux-ng? [Y/n]
:: Replace scrollkeeper with extra/rarian? [Y/n]
warning: apr: forcing upgrade to version 1.2.11-1
warning: apr-util: forcing upgrade to version 1.2.10-1
warning: dnsutils: forcing upgrade to version 9.4.1_P1-2
warning: ntp: forcing upgrade to version 4.2.4p4-2
warning: ruby: forcing upgrade to version 1.8.6_p111-2
warning: sudo: forcing upgrade to version 1.6.9p5-1
warning: xpdf: forcing upgrade to version 3.02_pl1-1
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n]
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: pacman-3.0.6-1
Total Package Size: 0,80 MB
Proceed with installation? [Y/n]
checking package integrity... done.
cleaning up... done.
(1/1) checking for file conflicts [#################################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
pacman: /etc/pacman.d/core exists in filesystem
errors occurred, no packages were upgraded.
The last upgrade was almost perfect but now strange things happens. :^(
Can anyone help me to solve this, please??kishd wrote:Did you replace current with core in your pacman.conf file?
yes, the second output is related to pacman.conf with `current` replaced with `core` .... and good to say, that I did NOT forgot to update repositories with `pacman -Sy` before upgrade ;-) -
How to import a class not in the package from a package
how to import a class not in the package from a package?
http://java.sun.com/docs/books/tutorial/java/interpack/usepkgs.html
-
My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!
You're very welcome!
I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive). -
I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference, how do I go about doing that? I have not open the packaging yet.
Hi
Thanks for that. Yes, the ipad was purchased recently. I called Apple last Friday and they ask for the receipt. I wonder if anyone were able to swap their ipad for a larger storage in the past at the apple store without a receipt? 16Gb is such a small storage. -
Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
WoodyHey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S. -
Why not start the game set?
Why not start the game set? They curl up and can not be opened.( Iphone 5s, ios 8.1.2)
Post in your native language...the translation makes no sense in English.
-
Windows setup could not process the Catalog setting
Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
If I don't use any file installation is performed correctly.
Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
See setup log files under [X:\Windows\panther] for details."
However, when I check this folder in Windows Server there isn't any updated log file...
My unattend.xml file contains:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Type>Primary</Type>
<Size>25000</Size>
</CreatePartition>
<CreatePartition wcm:action="add">
<Order>2</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
<Extend>false</Extend>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Extend>true</Extend>
<Format>NTFS</Format>
<Label>Media</Label>
<Letter>D</Letter>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<WindowsDeploymentServices>
<Login>
<Credentials>
<Domain>*********</Domain>
<Username>Administrator</Username>
<Password>*********</Password>
</Credentials>
</Login>
<ImageSelection>
<InstallImage>
<ImageGroup>ImageGroup1</ImageGroup>
<ImageName>TCImage</ImageName>
<Filename>Install.wim</Filename>
</InstallImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Anyone know how to fix it?
RegardsWell, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
http://oi61.tinypic.com/sxkjt5.jpg
I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
Regards -
Server software is not seeing the .nbi sets in Library/NetBoot/NetBootSPO
The server software is not recognizing the .nbi sets that are located in Library/NetBoot/NetBootSPO. When trying to turn on the NetInstall service I receive an error that there are no images installed.
alright I managed to solve my problem. I didnt realize the ***.nbi had to be placed Library/NetBoot/NetBootSP0
I made the mistake of making the .nbi folder a sub folder and not the parent. So now I can see the image in the Images tab.
thanks for the help. -
I can not change the country setting on my Iphone 4 or pc because it says I need to spend the credit balance that is already on the account.
Contact iTunes support, as only they can fix this:
http://www.apple.com/support/itunes/ -
Every time I load the newest version of Firefox 3.6.6 it says it is not accepting the proxy setting. Since I've never had a problem like this, I don't know how to correct it.
== This happened ==
Every time Firefox openedIn Firefox 3.6.4 the default connection settings have been changed to "Use the system proxy settings".
See "Connection settings": [[Firefox cannot load websites but other programs can]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select ''No Proxy'' -
Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
RegardsI personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.
-
[4.0 EA2] - Shift + F4 does not open the package specifications
Hi,
I tried opening the package specifications by clicking on the package name in a worksheet and then doing a Shift+F4 but it did not work.
This used to work on 4.0.0.12.27. Is this a bug?
Regards,
SujoyThere are some errors thrown into log when this happens.
Level
Source
Message
SEVERE
oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$1
node has no children at javax.swing.tree.DefaultMutableTreeNode.getChildAt(DefaultMutableTreeNode.java:243)
WARNING
org.openide.windows.WindowManager
[Winsys] TopComponent com.oracle.jdeveloper.nbwindowsystem.NbEditorContainer throws runtime exception from its componentActivated() method.
Please repair it! -
Accessing Class not in the package by the Class in the Package.
Hi All,
I am using window my java application are located at
c:\javaProg\completeReferance\......
my Class path is set to c:\....
Iexecute java application using
java javaProg.completeReferance.MyProgramThe problem is when I wanted to use some other class which is not in any package I get the following error.(say class Car).
C:\Users\pravin>javac c:\javaProg\completeReferance\SystemDemo2.java
c:\javaProg\completeReferance\SystemDemo2.java:7: cannot find symbol
symbol : class Car
location: class javaProg.completeReferance.SystemDemo2
Car object = new Car();
^
c:\javaProg\completeReferance\SystemDemo2.java:7: cannot find symbol
symbol : class Car
location: class javaProg.completeReferance.SystemDemo2
Car object = new Car();
^
2 errorsThis is my program ...package javaProg.completeReferance;
public class SystemDemo2
public static void main(String [] args)
Car object = new Car();
}Where should it place the class file for Car class.Can some one explains who to make the class from one package compitable with classes in default package or any other package.I hope this problem may be faced by lots of newbies.
Appreciate your concern!
Message was edited by:
confused_in_javaThere's nothing wrong with it per se... but it has a
number of pitfalls. Basically it's a hell of a lot
more likely to go wring at runtime than the good ole
"just put the class in a package and import the
sucker properly" solution.Alredy implemented this now.
That's what makes me shudder to see it in the
(forgive me) shakey hands of a newbie... it's a bit
like watching a tree year old trying to open a box of
matches... if you've got any brains you push the
rubber ducky in his hands and quietly secrete the
matches in the cupboard above the fridge... and get
yourself another beer whilste you're there.
Christians don't drink on Sunday. So there's more for
me.Thanks I wil remember this.
I am about to put a new Thread I thought insted so putting a new thread I will ask it here.
This Question is a bit wiered so please excuse me if you think this is foolish.
I was just wonder that if we can put our package, which include classes offcourse at some web location, then this will be available to us from anywhere and can be shared all accross.
So I am tring to dumb the package in a jarfile and place it at my webspace http://pravin.biz.ly/ how ever somehow i have problem doing it can any one help.
Regards!!
Pravin Dubey.
Message was edited by:
confused_in_java
Maybe you are looking for
-
How do I get safari to open a pdf in window.
How do I get safari to open a pdf in the browser window. A while ago I turned it off by typing defaults write com.apple.Safari WebKitOmitPDFSupport -boolean yes into the terminal. Basically how do I undo that command
-
Pages, Keynote and Numbers 4.1 will not Open
Process: Pages [81254] Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages Identifier: com.apple.iWork.Pages Version: 4.1 (923) Build Info: Pages-9230000~1 Code Type: X86 (Native) So I rebooted, still nothing. I decieded I wo
-
Hi All, We have a large store spare parts in ERSA (SAP). On segregation, it has come to know, many parts are not machinery related but these are parts of vehicle maintenance which are not actully spare parts of machines used in process. We want to se
-
I have a Hitachi 1T external HD that connects to my MB Pro via USB. Until the other day accessing the HD was as simple as plugging in the USB cable and opening the drive in Finder. The other day, my HD no longer appears in Finder, though I can see
-
Hello all: I am trying to apply a Spry effect behavior to a drop down list selection. No matter what I try, the code attaches to the entire drop down (which works great by the way) rather than a selection within the drop down. Here's the chunk of cod