XY graph has 'negative colors' when used on PC with XP

I built an application with windows 2000. I have distributed it. One customer using XP has found that when the XY graph begins to plot the background and gridline colors swap from black to white and visa versa. We have tried our program on an XP machine here, and can not replicate the problem

This sounds like an issue with the graphics driver on that XP machine. I've seen all kind of weird issues due to driver bugs.
Is this an older video card? See if there is a new driver available for XP. They might also want to try other display settings e.g. 32bit color, 24bit color, 16bit color.
Also try to temporarily reduce the graphics acceleration (display control panel..settings..advanced..troubleshooting) by a click or two. Any improvement?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

New AP3 Version Has Muted Colors when Using External Editor

Hi All,
I'm having a frustrating problem. I just noticed that files that I've edited using an external editor (PS5) come back to Aperture with significantly dulled colors. At first I thought it was something that PS was doing. Then, I realized that this was happening to the new versions created by Aperture even before the external editor was completely launched.
Right when you select "edit with Adobe Photoshop CS5.app" Aperture creates a new version - right then I can see the colors being dulled/muted. I don't for the life of me know how to avoid this from happening.
My export settings are:
- 16 bit TIFF
- DPI: 300
- External editor color space: Adobe RGB (1998)
Any help in this would be greatly appreciated.

I'm taking a look now. It's perplexing (to say the least).
There is definitely a shift in the created-for-external-editor Version (I'm seeing the same color shift, almost exclusively in the middle- and high-tone cyans, but not quite to the same degree as you). I using my usual settings of 16-bit and "No Profile Selected".
Although the shifted version shows in Aperture, it does not show in PS-CS5. In other words, the shift is somehow removed when the file is opening in PS. When the file is closed in PS, the shifted version remains in Aperture.
The histogram is very different for the Versions in Aperture.
The color values shown in the Loupe and in the color meter (which shows in the Info Pane at the top of the Adjustments tab of the Inspector) are +the same+ for the Versions, though the histograms are different and the images are dissimilar.
I am seeing -- as best I can tell; it's clearly time to take notes -- inconsistent behavior. Sometimes a shifted Preview will not have a shifted full view. When I send a previously edited in PS Version back to PS, sometimes the shift disappears.
If I have the time later I'll make a chart. I can confirm that something is amiss. I don't edit that many images in PS, but I still do so regularly, and I have never noticed this before. (My images are in general neither saturated nor blue, so it is possible that there has been nothing to notice in those images. I have some very blue JPGs which I may try.) My hunch, though, it that this will end up being traced to something in the RAW conversion done to captures made with this camera.
*Anyone have any underwater RAW captures made with a camera other than a Nikon?*
Message was edited by: Kirby Krieger

[solved, I suppose] weird colors when using yaourt-git with screen

This happens only when using yaourt-git in screen: http://loka.pl/outgoing/yaourt_colors.png
Is it just me? I tried changing all the color settings in yaourtrc but I can only "fix" it by disabling color entirely.
Last edited by fwojciec (2008-08-22 19:22:55)

It looks like it's impossible to get italics working in screen. I made a patch for yaourt-git to get rid of the problem, though this is really a pretty crude hack that simply disables italics when yaourt is used inside screen:
--- yaourt/src/lib/color.sh.orig 2008-08-22 14:07:28.000000000 -0400
+++ yaourt/src/lib/color.sh 2008-08-22 14:08:08.000000000 -0400
@@ -24,7 +24,11 @@
COL_BOLD="\033[1m"
COL_INVERT="\033[7m"
COL_BLINK="\033[5m"
-COL_ITALIQUE="\033[3m"
+if [ "$(echo $TERM | grep -o screen)" == "screen" ]; then
+ COL_ITALIQUE="\033[0m"
+else
+ COL_ITALIQUE="\033[3m"
+fi
NO_COLOR="\033[0m"
# Color list
This is an altered PKGBUILD for yaourt-git (you can use the yaourt-git tarball from aur and just add the patch line and update md5sums).
# Contributor: Manuel "ekerazha" C. (www.ekerazha.com)
# Author: Julien MISCHKOWITZ <[email protected]>
pkgname=yaourt-git
_realname=yaourt
pkgver=20080822
_realver=0.9.1
pkgrel=1
pkgdesc="yaourt test release"
arch=('i686' 'x86_64' 'ppc')
url="http://www.archlinux.fr/yaourt-en/"
license="GPL"
depends=('wget' 'diffutils' 'pacman>=3.1.0')
makedepends=('git')
provides=("$_realname=$_realver")
conflicts=("$_realname")
install=yaourt.install
backup=('etc/yaourtrc')
source=('yaourtrc-0.9-1' 'yaourtrc-0.9.1-1' 'yaourt_screen.patch')
md5sums=('9e43668d5bed3b0561de8c9c10e7d618'
'd07a57031ad0fddb2565861f86cf5675'
'81c04a04303311dcaac76b5d64d5b978')
_gitroot="http://projects.archlinux.fr/yaourt.git"
_gitname="yaourt"
build() {
cd $startdir/src
msg "Connecting to GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd $startdir/src/$_gitname-build/src
patch -Np2 -i $startdir/src/yaourt_screen.patch || return 1
make install DESTDIR=$pkgdir || return 1
# preinstall original backup files for yaourtrc
install -D -m 766 $startdir/src/yaourtrc-0.9-1 $pkgdir/var/lib/yaourt/backupfiles/yaourt/yaourt-0.9-1/yaourtrc
install -D -m 766 $startdir/src/yaourtrc-0.9.1-1 $pkgdir/var/lib/yaourt/backupfiles/yaourt/yaourt-0.9.1-1/yaourtrc

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%.

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%. Sometimes it will reboot on its own, and other times you have to leave it for an hour or so and then manually turn the phone on again. Any ideas?

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes up again?
If this does not work, try to save as much data as you can and set it up "as new device": How to back up your data and set up as a new device

Why do I get bright colors when using the smudge tool?

Why do I get bright colors when using the smudge tool?

Thank you!!!
*Caryl *
(my flickr page ↓)
*https://www.flickr.com/photos/feathersarenice/
<https://www.flickr.com/photos/feathersarenice/>*
We were all born mad. Some remain so.
"Reality is whatever refuses to go away after I stop believing in it."
Philip K. Dick

HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?

Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

[svn] 1720: Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints .

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Strange behaviour when using connection pooling with proxy authentication

All
I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
* User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
* User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
Regards,
Chris

Hi Chris,
I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
Cheers
Greg

Scope when using a JavaBean with JSP

what is the meaning of this question .....?
"Which of the following can not be used as the scope when using a JavaBean with JSP? "
question 4
site :http://java.sun.com/developer/Quizzes/jsptut/

The question is clearly written. I don't see how you can be confused. But let's assume you are since you would not have posed the question.
Dumbed-down:
There are 4 scopes or areas of variable visibility in JavaServer Pages. Which of those can areas can not be used with JavaBeans?
Does that help?

When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYD

BARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

Go to settings/music/volume limit tap on that. Make sure it is set to OFF and when you tap it that the slider is at max

How to avoid data repetation when using select statements with innerjoin

how to avoid data repetation when using select statements with innerjoin.
thanks in advance,
satheesh

you can use a query like this...
SELECT DISTINCT
         frg~prc_group1                  "Product Group 1
         frg~prc_group2                  "Product Group 2
         frg~prc_group3                  "Product Group 3
         frg~prc_group4                  "Product Group 4
         frg~prc_group5                  "Product Group 5
         prc~product_id                  "Product ID
         txt~short_text                  "Product Description
UP TO 10 ROWS
INTO TABLE l_i_data
FROM
Joining CRMM_PR_SALESG and
COMM_PR_FRG_ROD
crmm_pr_salesg AS frg
INNER JOIN comm_pr_frg_rod AS prd
ON frgfrg_guid = prdfragment_guid
Joining COMM_PRODUCT and
COMM_PR_FRG_ROD
INNER JOIN comm_product AS prc
ON prdproduct_guid = prcproduct_guid
Joining COMM_PRSHTEXT and
COMM_PR_FRG_ROD
INNER JOIN comm_prshtext AS txt
ON prdproduct_guid = txtproduct_guid
WHERE frg~prc_group1 IN r_zprc_group1
   AND frg~prc_group2 IN r_zprc_group2
   AND frg~prc_group3 IN r_zprc_group3
   AND frg~prc_group4 IN r_zprc_group4
   AND frg~prc_group5 IN r_zprc_group5.
reward it it helps
Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM

How do you stop needing to verify email password when using yahoo.att with Mac Mail

How do you stop needing to verify email password when using yahoo.att with Mac Mail?

Nevermind, I fixed it (I think). I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically). I selected it and it had an optiion to delete the account, which I did.

WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATa?, WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATA?

why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?

It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.

XY graph has 'negative colors' when used on PC with XP

Similar Messages

Maybe you are looking for