Year values are displaying with comma ex: 2,013

Hi,
We are Using OBIEE 11.1.1.7.0 , In the time dimension hierarchy, the year values are displaying in the reports with comma separator i,e.,  2,013
I want to remove the Comma in the year value of hierarchy.
Could you please help me anyone to achieve this.
Thanks,
Babu.

unset the set the comma separator for thousand using column properties->Data format and then save it for system wide.
if helps mark
~ http://cool-bi.com

Similar Messages

  • Currency field to be displayed with commas and asterisks(formatting)

    I have a field REGUH-RWBTR in my sap script code. I need to have the currency displayed with commas. And also if the digits are less, then left pad it with asterisks for remaining spaces.
    For eg, If the Digit is 12345678912.23 (max value), it should print as 12345,678,912.23.
    And If the digit is 12345.89, it should print as ******12,345.89
    Please help me to solve this problem.Its urgent.
    Thanks,
    Sandeep.

    Hello,
    You can use the WRITE using EDIT MASK.
    USING { {NO EDIT MASK}|{EDIT MASK mask} }
    Effect
    This addition overrides a conversion routine defined through reference to the ABAP Dictionary. The addition NO EDIT MASK only switches off the execution of an assigned conversion routine. The addition EDIT MASK calls either another conversion routine or defines an edit mask. For mask, a data object of the same name is expected.
    In order to call an arbitrary conversion routine CONV, mask must contain two equals signs, followed directly by the name of the conversion routine: "==CONV". During output, the content of dobj is passed to the function module CONVERSION_EXIT_CONV_OUTPUT, converted there, and then the result is displayed. If the function module is not found, an exception that can be handled is triggered (as of Release 6.10). The statement DESCRIBE FIELD contains an addition in order to fill mask accordingly.
    If the output length is specified explicitly with len, the conversion routine is executed for the specified length; otherwise for the implicit output length. If * or ** is specified for the output length, the appropriate rules are used for the converted result.
    If the first two characters in mask are not equals signs, the content is interpreted as an edit mask in which some characters have a particular meaning. The WRITE statement does not then output the content of dobj directly, but the character string in mask as follows:
    If the first two characters in mask are "LL" or "RR ", these are not output, They control whether the edit mask is left-justified or right-justified. If the first two characters are other characters, the edit mask is left-justified.
    All "_" characters are replaced from the left (in the case of "LL") or from the right (in the case of "RR") with characters for character-type types or numbers for the types p or i from dobj. In the case of fields of type c, closing blanks are ignored. Data objects of type f or x are converted into type c before editing. Superfluous characters "_" in mask are replaced by blanks. Characters from dobj for which there are no characters "_" in mask are not displayed.
    If dobj is of type i or p, the first character from the left "V" in mask is replaced with "-" in the case of a negative number and by blank in the case of a positive number.
    All the other characters of the edit mask are displayed unchanged.
    If no output length is specified, the implicit output length of dobj is used. If len is specified for the output length, the value of len is used. If * is specified for the output length, exactly that length that is required for the list display is set. If, in Unicode systems, characters of the edit mask are replaced by characters that take up more than one column on the list, the output length is increased accordingly and the output is filled with blanks in the list buffer. If ** is specified for the output length, double the length of the edit mask mask is used.
    If other formatting options are specified concurrently for an edit mask, these are used first and then the special characters in the edit mask are replaced by the interim result. The date masks date_mask are an exception to this. If these are specified, the edit mask is ignored.
    Notes
    In Unicode systems, you must remember that a character "_"in the edit mask does not necessarily correspond to a column in the list display since the space required in the display depends on the character to be replaced.
    The minus sign for a negative number is not displayed if no edit character "V" is specified. The decimal separator of a packed number with decimal places must be specified at the required position in the edit mask.
    Example
    Edited output of time duration. In the first output, the function module CONVERSION_EXIT_DURA_OUTPUT is executed. This converts the duration specified in seconds into minutes. In the second output, the edit mask is output according to the above rules. However, the underscore characters "_" are replaced by the characters from time.
    DATA: dura TYPE i,
          time TYPE t VALUE '080000'.
    dura = sy-uzeit - time.
    time = dura.
    WRITE /(30) dura USING EDIT MASK '==SDURA'.
    WRITE /(30) time USING EDIT MASK
                           'RRThe duration is __:__:__'.
    Regards,

  • These i7 4770K Temperatures And Voltage Values Are Normal With Z87-G43?

    Hello everyone,
    I recently upgraded my good old Core2Duo rig and bought a new cpu-motherboard-ram trio. My new specs is as follows:
    - i7 4770K @ stock speed + Coolermaster 212Evo cpu cooler
    - MSI z87 g43 motherboard
    - 2x4 GB G-Skill Ripjaws X 1866Mhz
    - Case: Corsair Carbide 400R
    The problem is I wasn't aware of that new Haswell cpus are running slightly hotter and now I'm little bit worried about my temperatures. Since I was also planning to overclock my cpu a bit and trying to find a point that doesn't need a vast voltage increase, I'm losing my sleeps over this situation at the moment.
    Anyways. I'm using softwares like HWmonitor, Coretemp, Realtemp and Intel Extreme Tuning Utility. Turbo Boost is also active. So the cpu is going up until 3.9 GHz. Other than that I'm on stock speeds, and motherboard's default values. Here are my temperatures:
    Ambient room temp: Varies between 23-25 °C
    Idle: 28-30 °C
    While playing demanding games like Battlefield 4: Max 58-65°C
    With Intel Extreme Tuning's stress test for 15 mins: max 65-70 °C
    With Prime 95 Blend and OCCT burn tests for 15 mins: max 78-82 °C
    I also run realtemp's sensor test and the values are identical since it's using Prime95 too.
    I also noticed that Prime 95 and OCCT is increasing my cpu voltage value from 1.156 to 1.21 while Intel Extreme Tuning's stress test and BurnInTest is using 1.156v. All these test are using %100 of the cores. Couldn't understand why there's a voltage increase on certain tests which leads my temps go even higher and higher. Will I encounter these kinds of random voltage increases during normal tasks? Like playing games, rendering some stuff etc..?
    On the other hand I tried motherboard's OC Genie future to see what happens. It overclocked the cpu automatically to 4.0 GHz @1.10v. With this setting I've seen max of 70 °C for a second and mostly 65-68°C under OCCT stress test. And also my voltage didn't increase at all and sit at 1.10. I'm a bit confused about these values. Since with default settings I'm getting hotter values and my voltage is going up to 1.21 with Turbo Boost under Prime95/OCCT burn tests. I also found out that my BIOS is v1.0. I don't really have a performance or a stability issue for now except this voltage thing. Does a BIOS update help on that situation? I don't really like to touch something already working OK and end up with a dead board.
    Also I'm wondering if my temperature values are normal with the cpu cooler i have (Coolermaster 212evo)?
    I also could buy some extra fans for my case (1 exhaust to top & 1 intake to side) and maybe a second fan for the cpu cooler if you guys think that these would help a bit.
    Sorry for my English by the way. I'm not a native speaker.
    Thanks for all your comments and suggestions already.

    Thanks for the reply Nichrome,
    I will follow your suggestions for the fans. Currently I don't have any fans on top. But I'm considering to buy some fans to top and side. So you get better results with top fans being exhaust right?
    Also which fan are you using as the second fan for the cpu heatsink? I would buy one of these as well since we have the same heatsink.
    I'm also using the default/auto voltages and settings at the moment. Just Turbo Boost is enabled and when it kicks in voltage is going up to 1.156. Which seems normal and doesnt produce dangerous level of heat. The thing is if I start running Prime95&OCCT the voltages going up to 1.21+ level at the same turbo boost speed (which is 3.9 GHz). And that produces a lot more heat than usual. But if I use BurnInTest or Intel Extreme Tuning Utility stress test the voltages sit at 1.156 and under full load on all cores. I'm wondering what's the reason of this difference and if it is software or motherboard related. Even with using the OC Genie @ 4.1 GHz temperatures and voltages seem lower than the stock&auto settings (idle 35-38 / stress test with OCCT 70C max, gaming 60-65C max). I'm not sure if a BIOS update would fix this. Since the whole BIOS flashing process is creeping me out. I don't like to bother with something that is already working OK. Don't want to end up with a dead board in the end :P Maybe I'm becoming a bit paranoid though, since this is a really hard earned upgrade after 6 years. :P

  • Diff values are displaying in VAT report_S_ALR_87012357

    Hi experts,
    Our user is trying for VAT report in t. code S_ALR_87012357, different values are displaying in Tax base amount column and Deduct Input Tax as
    Wrong Report:
    Tax base amount    : 303.40
    Deduct. Input Tax    : 19280
    Gross amount            : 19583.40
    Correct report should be:
    Tax base amount    : 303.40
    Deduct. Input Tax    : 75.85
    Gross amount            : 379.25
    Here deduct. Input Tax is showing very high values as 19280/- but should be 75.85
    Please suggest is there any solution?
    Thanks in advance,
    Ramakrishna B V

    Hi Ganesh How did you add extra field .

  • TS3999 There is no Europe/Minsk timezone in iCloud calendar interface. All scheduled events are displayed with 1 hour error.

    There is no Europe/Minsk timezone in iCloud calendar interface. All scheduled events are displayed with 1 hour error.
    Is there any workaround?

    Hello again, Kirik17.
    The concept still holds true. When clicking to select your time zone, you will need to select another city within your same Time Zone so that that one becomes your default.
    If you are still unable to select your Time Zone, you may find more information by using another one of Apple's Support Resources at: https://getsupport.apple.com/GetproductgroupList.action.
    Cheers,
    Pedro.

  • Restricting input to integers, display with comma separators

    I'm using Acrobat 8 on a Macintosh. My question is very similar to the previous one about truncation. I have a small array that adds and subtracts fields, and sums them to totals. The following scripts restrict the data entry exclusively to numbers, but my problem is that it doesn't display my fields in Acrobat with comma separators, e.g., 123,456. Is there a better way of doing this, or is it just a matter of adjusting the formatting script?
    Using a custom script under Format:
    Custom Format script:
    event.value = "(" + eventvalue +")";
    Custom Keystroke Script:
    event.rc = /^[0-9]*$/.test
    (event.change);
    Bill Lomax

    I'm not aware of any cultures that allow multiple consecutive separators, and of course "en-US" certainly doesn't. I think you answer is just that TryParse isn't as smart as you would like it to be.
    If you know how many digits there are after the decimal point, you could use ToString to convert the decimal back to a string and verify that it is the same as the original string. For example, if the string has a currency symbol, thousands separators and
    two decimal places, you could use the following:
    Dim result As Decimal
    Decimal.TryParse(Me.tbxkWhCost.Text, System.Globalization.NumberStyles.AllowThousands _
    Or Globalization.NumberStyles.AllowDecimalPoint Or Globalization.NumberStyles.AllowCurrencySymbol, Nothing, result)
    If result.ToString("C2") = Me.tbxkWhCost.Text Then
    'String is good
    Else
    'String is bad
    End If
    I realise that this doesn't work if you don't know what format the number will be in.

  • Old values are displayed when i click the back button of the browser

    Hi all,
    I am having a INPUT screen having 2 textfields and a "Confirm" button. When user enters values in these textfields and clicks on "Confirm" button, another CONFIRMATION page is displayed where these values are just displayed as h:outputText. But when user clicks the back button of the browser previosly entered values are getting displayed in the INPUT screen. My question is how to remove these values or set to null on click of the Back button of the browser?
    Thanks in adv.

    Hi,
    i believe this should handle the browser. For instance, you have to tell him with meta tags, not to cache the website. Until yet I didn't succeed in doing so!
    With kind regards,
    Lutz Steinfeld

  • NVision prior year totals are overwriting with current year

    Hi All,
    I have created an nVision report with two columns, one is for Current year(timespan-YTD) expense totals and other one is for Prev Year(timespan-Prev_Year) totals and row level i have all Expenditure accounts from Account Tree.
    When I run the report, Current Year and Prev Year coulumns are displaing same totals, when I ran the SQL trace, i found that Prev Year, column sql was running two times, one is for prev year and otherone is current year and second sql was overwriting with current year totals.
    When I looked into timespans for PREV_YEAR, I saw that "End Period Type" was set to "Relative to Current Period", when I swich to"Absoluate Period" then Prev Year column was showing Prev Year results.
    But switching Period type to : Absolute is wrong,when comparing the current year with Prev year with As of Date.
    Any thoughts on above issue.
    Thanks,
    Venky

    Dear Rachana
    The long text of error AA669 is very clear about the root cause of the
    error.
    The idea behind the message: it is not allowed to close first general
    ledger before subleger. This leads to inconsistencies. It is common
    accounting principle to always close the subledgers first and only
    then close the general ledger (FI-GL).
    The solution is: re-open fiscal year in FI-GL (txn OB52) and follow the
    steps from note 619969.
    o  RAAFAR00
    o  RAPOST2000
    o  RAPERB2000
    o  RAJABS00
    If it is not possible to open the fiscal year because audit has already
    been completed: workaround (which is not quite correct from the legal
    point of view) is the report RACORR20_A from note 29694.
    Best Regards,
    Blaz

  • Y/t - graphic: discrete values are displayed continuously

    Whenever I want to display discrete values in a y/t - graphic, they are displayed continuously (adjacent function values are connected)
    See for example:
    The lower graphic should show the following discrete function:
    x | (fx)
    ---|--------
    2 | 0
    3 | 1.27
    4 | 0
    5 | 0
    6 | 0.64
    7 | 0
    8 | 0
    9 | 0.42
    But as you can see, adjacent function values are connected. I couldn't find out, how I can change that. Hope someone can helb me!
    thanks,
    Philipp
    Solved!
    Go to Solution.

    Excellent question and documentation! Thank you for making it very easy to answer your question.
    Click on the Paintbrush icon on the Y/t chart display - this is a link to the Colors and Lines properties for the chart display. Select Bar from the drop down list for Input 0.
    If you prefer a discrete symbol, choose from cross, square, circle, etc.
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • Word files are displayed with junk

    Hello,
    I am running Weblogic 6.1 SP2. It shows the word files with junk in it. How can I
    fix this problem?
    Thanks,
    Meghana

    It is probably not a problem with the WebLogic server itself; I've done Word
    files etc. from WL without an issue. Are you doing via FileServlet, your own
    JSP, etc. Does it work from Apache? If so, use telnet to compare headers.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com/coherence.jsp
    Tangosol Coherence: Clustered Replicated Cache for Weblogic
    "Michael Smith" <[email protected]> wrote in message
    news:[email protected]...
    >
    This problem still occurs on WLS 7.0 as well.
    "Cameron Purdy" <[email protected]> wrote:
    Use telnet to do a GET to WL and compare the results to a GET from
    another
    server. There's gotta be a dif in the header that confuses IE (not hard
    to
    do ....)
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com/coherence.jsp
    Tangosol Coherence: Clustered Replicated Cache for Weblogic
    "Eddie Sheffield" <[email protected]> wrote in message
    news:[email protected]...
    Cameron Purdy wrote:
    I am running Weblogic 6.1 SP2. It shows the word files with junk
    in
    it. How can I fix this problem?What Word files? How are you accessing them? Via a Servlet? JSP?
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com/coherence.jsp
    Tangosol Coherence: Clustered Replicated Cache for WeblogicSince I'm having the same problem I'd like to hear a solution as well.I
    just have a simple link to a Word document that lives on the server.No
    fancy processing or dynamic generation of the document or anything.
    There is a mime mapping defined in the web application deployment
    descriptor (viewed with the console tool) for "application/msword"with
    a file extension of "doc" It works fine from Mozilla - click the link
    and it asks if I want to save or open. But in IE 6 it just immediately
    displays the file contents in the browser as if it were plain text,so
    it comes out as junk. Using the same browser and clicking links toword
    docs on other web servers works fine - I get the save/open dialog and
    clicking open pops up Word as expected.
    Thanks for any ideas!
    Eddie Sheffield
    Senior Java Developer
    G3 Systems, Inc.
    P:540.951.4300
    F:540.951.4311
    http://www.g3.com

  • Excel sheet values are displayed in Chinese while reading from server in WD

    Hi,
    I am reading an excel file values, from the excel sheet which is in the server. I am able to the read the values from webdynpro, but the values which i'm getting are in Chinese language. But the excel sheet there in server has the values in English.
    Please help on this.
    Thanks,
    Suresh
    Edited by: SureshKumar Arumugam on May 10, 2009 4:01 PM

    Hi,
    On the Microsoft Side: Ensure that the Excel Sheet - indeed has values in English. It may be that you may be reading the wrong excel sheet in the wrong folder. If not and the characters are in English and you are still reading in other languages - go to [Microsoft Help on Multiple Languages|http://office.microsoft.com/en-us/excel/HP052558391033.aspx]. Follow the procedure and change the languages for only English.
    On the SAP Side: If the above still does not work - check if you are using any .xlf files for Chinese. For more information on .xlf files and internationalization, please go to : [Internationalization of WDJ Projects|http://help.sap.com/saphelp_nw04s/helpdata/en/8e/7ce87a2aede645ae3cdc857b791590/frameset.htm]
    Thanks.
    p256960

  • Web pages are displayed with oversize fonts and text is overlaying why

    This is what I Get
    If i could insert an image here to show you what my screen looks like. It would be better. If I coppy what I get in Firefox here , it displays correctly. I am using G Chrome to write you. Text is overlapping in fonts the size of one third of the screen.

    first thing to try is reset zoom levels to normal - press ctrl + 0 ('zero')
    also have a look at [[Websites look wrong]]

  • Fiscal Period displayed with a Z1

    Hi
    All fiscal period values are displayed with a Z1 in front of it in webi
    But it does not happen in BEX, any ideas how to resolve this in the universe or query.
    Thanks in advance

    Ingo,
    Is this an integration kit issue, I see the right value when I generate query using BEX. and moreover formula might work for display purpose but the LOV's are still going to be displayed with Z1
    Any way we can address this in BEX query, our universes are based on BEX queries
    Thanks

  • WAD Graph-  Value Axis display value with commas

    Hi Gurus,
    In the WAD graph Value Axis displaying the value from 0 to 40000 like below
    40000.
    30000.
    20000.
    10000.
            0.
    But we want to display with comma for every 3 digits(1000). like
    40,000.
    30,000.
    20,000.
    10,000.
              0.
    Please do needful.
    Regards,
    Kiran A
    Edited by: Kiran A on Oct 21, 2009 6:00 PM

    Hi Kiran A,
    you can do it as follows:
    Edit Chart->Refine->Value axis->Line->Format-> here you have to put: 0,
    That is all
    Regards
    Erwin

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

Maybe you are looking for