Yosemite Issues (Possible Resolution)

I did a pram reset cmmd+opt+p+r
Solved lagging (Beach Ball)
FileVault started working
iTunes issues were fixed

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
This likely has nothing to do with the color cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Printing issues possible resolution

My printer all in one was just telling me the black was out my colors themselves have over a quarter left of ink in them as I rarely use them at all. SO I replaced the black and big surprise it wont print black now you can do an alinement it prints black there you can do a test it prints black there you try an get it to print a document no black this is because it wants you to throw out the other colors as well and replace them at the same time as the black so you get to throw out 1/4 or more of unused ink that isnt cheap to buy in the first place and then surprise it works just fine. So every 4 changes of black you threw out a full color ink cartrige isnt that special? Id like to see this fixed but im sure the company wont do so as it works out well for them to line their pockets with money every day.

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
This likely has nothing to do with the color cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Yosemite issues on Retina MacBook Pro

I have some issues on my rMBP:
1. The user picture on startup screen is zoomed in like it is not ~@2x
2. When entering my profile it looks like Yosemite changes the resolution of my screen
3. Sometimes Finder stops working, the file and folders names are shown as black rectangles and not clickable. Only restating Finder fixes the issue

Hi, thanks for the info, I followed the steps with no luck (by the way fixed my WIFI problems!! )
Finally I got the solution:
System Preferences > Accessibility > Display > Reduce Transparency.
After that, the GUI is as fast as before.
Hope this help
(And I'm very sad my 2 years old rMBP fell so old..)

I can't hear iTunes music or internet radio but internal and external speakers are definitely working. Is there a key stroke I have set or some other, maybe Yosemite, issue?

I have checked my internal speakers on an iMac and also the external speakers - all working. When play music in iTunes the sound bar moves but no sound is heard. Same problem if I want to listen to the radio via internet. Has anyone a suggestion. Is it a Yosemite issue - I have had others involving printers. thanks

like davis says then even though I have connected headset and external speakers to my imac then at boot up the boot sound comes out of the imac speaker
but once booted into OS X all audio is played out of the headset and ext speakers and the imac speakers are silent as the grave

DPI issues. Resolution for background layer. Possible to change DPI settings per layer?

I have 8 layers.
My Background layer is a 800kb JPEG. When moved to Photoshop it becomes 30MB.
I cant figure out any possible way to keep this background layer size small.
I would like to lower the resolution, or quality, or anything of JUST THE BACKGROUND... but then my entire image changes quality.
How can I fix this???
Attached is JPEG. When I move into my existing 7inch by 7inch canvas as a new layer, it adds 30MB to the file size.

Thanks for the responses.
I understand what you mean about the 12.5MB, but as soon as you add an additional layer with even a small image... it balloons the size of the file.
Here is how you can duplicate my issue -
1) Drag over my background jpeg file as a Background into Photoshop. Save as PSD File. 12.5MB
2) Open a separate PSD File and drag over a layer with an image or just the image (i used a 500kb image within a PSD file). Save. File size doubles or triples!
3) You can then delete the background... and Save again. You are now left with a +-500kb PSD file. Crazy!?
The math just doesnt add up.
By the way ---
I was in CMYK mode, if I switch to RGB mode then flatten the file, I think this maintains resolution but loses layers.
New file size is significantly lower.
I was sending off my complete PSD files but I think I should Save As and then flatten each file before sending. I assume this is the only way.
Once I flatten though... there is no turning back right?

Possible Resolution to MiFi 2200 connection issues when using WiFi

I was having issues connecting to the Internet with my Windows 7 laptop using the MiFi 2200 as a WiFi device.
My WiFi adfapter was retaining the last IP Address it had obtained ... in my case my home network.
Go to a command prompt and do an ipconfig -release followed by ipconfig-renew.
It pulls an address from the MiFi from the DHCP range and works perfectly.
Hope this works for everyone!

Maybe also check specific for the 2 different tcpip protoclas loaded.. here is the solution that resolved my connection issue:
Updated Vista Home sp1 to sp2 ( 450+MB download )
Updated Atheros AR5007 drivers to 7.6 , 2008 release... there might be a newer release but I dont want to jack with it now that I'm working.
Check in network connections for wireless connection.
I had 2 TCPIP protocols loaded. v6 and v4 .. v4 had IP and DNS hard set. changed both over to auto assign
WALLA Mifi is now working wirelessly.

Possible resolution to sorting issue in iTunes 9 and 3.1

For those experiencing issues sorting Podcasts chronologically:
One particular daily podcast I subscribe to was not sorting correctly (was in random order on the iPod Touch 32gb 2nd Gen).
I did notice the "Release Date" wasn't carrying over to the iPod during the syncing process.
(If you try this, copy any podcasts you can't afford to lose to a separate directory)
1) I unsubscribed from the podcast in iTunes 9
2) deleted all the episodes from iTunes
3) Synced iTunes / iPod - (basically removing remnants of the podcast)
4) Went back to the iTunes store and subscribed again to said podcast
5) "Get" the episodes I wanted
6) Synced iTunes and iTouch
Thankfully, this corrected the issue of random sort order on my iPod - now the "Release Date" is again noted / visible when looking in the iPod and it is ordered correctly.
Hope this provides some relief to some.

I had this happen with my 3GS almost a month ago. No amount of trying to restore would work and the Apple Genius claimed he had never seen anything like it.
My iPhone was bricked with the error 23. I plugged it into XCode and it failed to restore saying there was a radio failure. There was no 3G, no WiFi no edge and no bluetooth. They were all grayed out in settings. Apple replaced my phone with no problem. This is what you will end up having to do as well.
You will be able to restore from your previous backup.

LED Alert Issue IOS5 - Possible Resolution

If the LED alert is set and screen locked, the LED flashes when a call is received.
However, when the phone is switched off and then on, the LED no longer flashes and possible workaround is to disable followed by enable of LED alert which allows the LED to flash.

It figures they couldn't add multiple fixes into the first update. At least my iOS 5.0.1 update went quick and easy (seems to work properly) doing it through the phone and not on iTunes.

Encountered just about every issue possible trying to sync music to iPod Touch after 8.1

If you're having any sort of syncing problems after the updates, bear with me as I tell my tale. Hopefully you can find yourself relating.
I have an fifth generation 64gb iPod Touch. Ever since I've updated to iOS 8 (then 8.1), I'm beginning to look at it as useless. I know there are all sorts of threads out there about people having difficulty syncing their music after the update, and I'm probably not covering any new ground, but I thought it was worth reporting every problem I've encountered and all the fixes I've tried.
I have a large music collection. Around 7000 tunes. They're all safe and backed up to my iTunes library on my MacBook Pro. I was aware that updating the iPod to iOS 8 might cost me a considerable amount of storage space, so I did it cautiously. I did it through iTunes, and I had no real issues. It didn't take up the huge amount of space it did for others. But my music collection on the device became all sorts of screwed up. Suddenly I was missing entire albums and artists. What albums and artists were still there often only had the first track of the album. Many songs were kicked off the device itself and I had the option to download from the cloud (I assume that's what that button meant). For about two weeks, I was too busy to listen to music, so I put the problem out of my head.
Last week I finally decided I needed to get around to fixing it. I plugged it into my USB port, and iTunes told me I was 20+ gb over capacity, with the 'Other' bar taking up most of the storage. I only had a few photos and apps on my iPod, but I deleted them anyway. I started going through my iTunes library and haphazardly deleted albums I figured I could go without. None of this even put a dent in getting more storage space. I quickly realized that I still needed to update my MacBook to OS X Yosemite, as well as get the accompanying iTunes update.
After the (justified) hours and hours of updating everything (absolutely everything I'm discussing is on the latest update), I plugged my iPod back in, and surely enough, the capacity bar reflected the actual amount of music I had. I had a good nine or ten GB to spare. 'Other' was barely taking up any space. I was elated, so I clicked sync. iTunes quickly jumped to either Step 4 of 4 (Waiting for Changes to be Applied) or 5 of 5 (Preparing to Copy Items) and hung. I gave it close to 45 minutes, and nothing was transpiring. I tried over and over. I'm not syncing via wi-fi (although I did try that). I'm syncing manually. I tried every permutation possible. Syncing only checked artists and albums (checking all those artists, by the way, takes a good fifteen minutes), syncing the entire library. Everything. After reading about people having similar issues online, I decided I may as well reset my iPod completely and set it up as a new iPod.
Again, I don't use my iPod for photos or apps, so I'm not having to worry about losing anything in the process of resetting. There's no need to restore from back-ups- all my music is in the my iTunes library. I don't really "do" iCloud, and any restore points on my computer are automatically done and unnecessary. After resetting, I tried to sync. Again, straight to the last step of the syncing process. I was patient, but clearly nothing was going to happen. I must have reset my iPod and set it up as a new device about five times. Finally, I got a sync to seemingly start working. I watched as all my music started turning black in the 'On My iPod' screen. I periodically checked the device itself, and noticed that, arbitrarily, I was only getting random tracks from albums, often the first track (for instance, I have every Beatles album, but I was getting one track per album on the device). When it finished syncing, I clicked on the tunes listed under 'On My iPod,' and found that many of them popped up with an exclamation point, indicating, I assume, that the song was unable to sync.
I reset again. Multiple times. Trying everything. I finally decided to sync only checked songs, and I checked one artist (embarrassingly, ABBA). Surely enough, the full ABBA album synced fine. I slowly started checking more and more artists. It was working. I got all the way to the bottom and watched as everything started syncing as it should. Entire albums were showing up on my device. Half an hour later, everything was synced, and I couldn't have been happier. I disconnected the device and went to listen to some music, only to find that everything was gone. Everything that I just watched sync perfectly to the device. I had no content on the device. Nothing at all. I reconnected it, and suddenly I was grossly over capacity again (I wasn't at all when the sync had finished). The bar did not, at all, reflect the contents of the device (in fact, I had nothing on the device at this point).
More resets. Again, I would get either no syncing at all, or only getting one or two tracks from artists. Finally, I called Apple Support while it was syncing again to explain the problem. The man said he's been getting vaguely similar reports. I told him that it appeared to be syncing properly as we spoke, but that I was confident I would lose all my music again once the sync finished. He stayed on the line, and bizarrely, out of nowhere, it synced perfectly. I disconnected the device, and I had a fully functional iPod again. For the past week, I've had no issues with it. After this successful sync, by the way, I was told I had 8.7GB of free space, which I would call accurate. The 'Other' was hardly there.
This morning, I added some new albums to my iTunes library, so I connected the iPod and clicked sync. Nothing. The new songs showed up on the 'On My iPod' screen, but they were greyed out with the loading circle. I waited an hour as it hung at 'Waiting for Changes to Be Applied' or 'Preparing to Copy Items'- I forget which, but I became accustomed to both. I was only adding maybe fifty new songs, but no progress was being made in terms of syncing. They remained greyed out. Not wanting to reset the iPod, I called Apple Support again. The man remotely accessed my screen and seemed quite puzzled. He saw the almost 9GB I had to spare. He had me click some of the obvious settings I'd tried time and time again. Finally, he had me, for a third time, switch from 'Sync Checked Songs' to 'Manually Manage Music and Videos.' He and I witnessed the capacity bar immediately change to 42GB over capacity! 42GB! He accused me of legitimately being 42GB over capacity (I'm not mad at him- he was very nice, by the way), and I pointed out how ridiculous that was. He agreed. After more and more troubleshooting, I told him it was a lost cause, and my only hope was to reset the iPod again. I realized that, from now on, whenever I sync new music from my library, I'm going to have to reset the device and sync from scratch. I got off the phone with him and did just that.
Two attempts failed, again hanging at those dang last steps. I was patient as can be, understanding how much music I had. An hour later, nothing. I tried once more, syncing artists slowly at a time, and suddenly, arbitrarily, it chose to miraculously sync perfectly. I walked away from the computer and iPod and took a long walk to clear my mind. I came back, and looked at the 'On My iPod' screen. Every song was black and on my device. I turned on my device, and... one track per album. When I clicked the songs that were allegedly on my iPod, I was getting exclamation marks, and they wouldn't play. The songs that sync and don't sync are entirely arbitrary and change every time. It's not a matter of corrupted files, I don't think. If it were, I would expect the same songs to be giving me the difficulties. The capacity bar offered an accurate reflection of what my device would be if everything were, in fact, synced. Even though only probably 10% of my library had made it to the device, iTunes told me that everything was synced and was taking up the appropriate amount of space. I disconnected the device, turned it on and off, quit iTunes, restarted my computer. I connected the device again, and the capacity bar now told me I had almost nothing on my iPod. I checked, and the iPod, once more, was devoid of content.
I have no idea what to do. I'm at a complete loss. I don't get it. I've tried nearly every fix that has been suggested online. I've tried all the different ways of syncing. I'm not syncing voice memos. I don't have any strangely titled tracks. I don't have any tracks that are unattributed to an artist or album. I have no duplicates. I have OCD, so my iTunes library, though vast, is kept in tip-top shape, and everything is ordered and tagged perfectly.
Wow. Hold the phone. I'm currently both overjoyed and even more flabbergasted. As I typed this long message, I left my device plugged into my computer. I didn't start a new sync- just left it plugged in. I happened to look at it just now, and, um, everything is synced. My iPod is working again. Still, this has become an ordeal that needs to be addressed. I'm scared to death of what will happen next time I want to sync new music to the device. I suspect more and more hours of resetting and fiddling with options. I want to stress enough that I'm positive this isn't a matter of me not being patient enough. Often times, I do indeed cut the sync short when no progress appears to be made, but I just as often leave it running for long periods of time.
This whole thing leaves me very on edge. Even operating the device scares me, because I'm getting excessive lags, and I'm worried that at any moment, the music will be gone again.
Anyone else going through this ordeal? Specifically these problems, or, like me, all of them at different times? Anyone randomly find that they're occasionally almost humorously over capacity? I'd like to hear your input. On my end, the only fix I've found is to just keep resetting the iPod as a new device over and over again until it eventually works properly. Again, this is pretty effortless (though time-consuming) for me, because I don't have any pictures or apps to restore. I use it solely for music. I can't imagine the stress of worrying about losing items other than music. Is this general and bizarre syncing problem just a bug that will eventually get fixed? Is Apple aware of it? When you've faced as many dead-ends as I have, it's hard to specifically articulate the problem to them. Can anyone relate or offer any fixes?
Again, using a 64GB fifth generation iPod touch updated to 8.1. 2GB non-retina MacBook Pro. OS X Yosemite. iTunes 12.0.1.26.
I also have a 64GB iPad 4, and I'm still debating whether or not to update it.

Kind of a similar issue with me.
I've got an ipod touch that I use for my music only. The vast majority of what I have loaded in my iTunes library on my laptop is music I've imported into iTunes from my cd collection. I have several albums that came from non-iTunes digital purchases (cdbaby, amazon, etc), and then guess a few hundred albums purchased from the iTunes store.
Everything seemed to work fine with ios 7 but once I upgraded my ipod to ios 8 I started having sync issues. My problem seems to be isolated to music that I did not purchase from iTunes (which is currently most of my music). I'll sync the ipod with my iTunes library on the laptop and I end up losing all non-iTunes purchased content on the iPod. The albums still 'show' on the iPod screen but once I select one to play it quickly scrolls through all the tracks and comes back to the screen showing the tracks with the red circle. If I go check the number of songs on the iPod in the settings>general>about option it will now have deceased the total number of songs by the number of tracks that were on the album.
I'm not a 'technical' type of user so everything I was trying to correct the issue was pretty much just change settings options in iTunes on the laptop and/or settings on the iPod without any real knowledge or confidence that it would help.
Eventually I gave up and deleted all content on the iPod and restart it as a 'fresh out of the box' iPod. It took several attempts at that to get all my songs copied from the laptop back to the iPod. After several attempts I finally thought it might have to do with the iCloud feature on the iPod (since it was only syncing iTunes purchased items and ignoring everything else not purchased via iTunes I thought it might be trying to verifying the items before actually loading them).
I completely set up the iPod again but used the option to not use iCloud (I don't use it to back up/store anything anyway). That attempt resulted in all my songs/albums syncing from the laptop to the iPod. Everything seemed to working fine for the past few months but then it happened again the other day. I had purchased a cd and imported it into my iTunes library... plugged in the iPod to sync everything and it wiped out all the non-iTunes purchased content again.
I deleted all the content off the iPod and did the 'out of the box' setup again and everything synced. Then this morning I purchased an album off of iTunes, hooked up the iPod to sync and again, it wiped out everything except my iTunes purchases.
This is getting beyond frustrating. The reason I've gone with apple all these years is because they are supposed to be 'idiot proof' for those of us that have a lot of knowledge of how/why all this works.

What PDF export settings to use for highest possible resolution printing?

I use indesign to create a roughly 68-page marketing booklet. The document is landscape and setup to print on 8.5" x 11" as a landscape book with facing-pages. I upload a PDF to a professional printing company to print a full bleed booklet. The book usually includes roughly 15, full-page, high resolution images as well as numerous other high resolution images throughout so it is important that the resolution is as high as possible and the images come out clean when printed.
On my old computer, I had a custom PDF export preset that I used to produced hi-res, print quality pdf's that were approximately 528MB in size. I recently got a new computer and I lost that old Preset... Now, when I use the "high quality print" default setting, the file size is about 74MB, much lower than what the documents used to be. I have played around with some of the settings, but I still cannot get the files to come out near as large as they used to be.
Is this an Indesign doument setup issue, or an export issue? What settings should I use in order to produce the largest, highest-quality, highest-resolution PDF possible?
Thanks for an input and guidance!

The size in mb is pretty much irrelevant and is going to vary with the number of pages and the type and quantity of graphical content.
The HQ Print preset downsamples raster art to 300 ppi if it's over 450, and uses jpeg compression to reduce file size. This is usually more than adequate for commercial printing. For fine art printed at a 200 lpi screen you might want to change the downsampling to 350 or 400 ppi and use zip compression (lossless) or no compression at all. I suspect your custom preset used no compression, and might not even have downsampled, but there's no advantage to sending more image data than the RIP needs to process the image.

Photoshop CS4 Extended, issues with resolution and font sizes on Mac

I have Photoshop CS4 Extended, which worked fine on my old 15 inch Macbook Pro, I think it was 2011 and had high definition display.
I now have a new 15 inch 'late 2013' Macbook Pro with retina display (2880 x 1800), and OS 10.9.4
I have 2 problems:
1) Using photoshop now, the resolution is a lot worse than with my old computer, even though my screen is higher resolution.
For example, the images themselves are worse resolution on my display, far less crisp and more pixelated than any of my other programs. And even the windows such as 'save as...' screens are terribly pixelated also. Is there a way to fix this?
2) When using the type tool, I cannot find how to change the size of the font. There used to be numbers which I could change, and also select the font type, both on the top menu bar always visible. Now there is not anymore. What there is there at the top, is what looks to be a bar on top of another bar. The top layer bar is on the left and reaches about one third of the way across the top, and I can drag it by its corner so it can extend more, but not less. It looks like there are things behind it which I cannot see, because it is over the top of them. Perhaps the text size and font options are stuck behind that. What can I do?
Many thanks!
Justin

Hi JJMack, you said "Seems like you want a low resolution display hook and external display to it." I do not know what that means. I did a google search for "low resolution display hook" and it came up with zero results. Also I do not have an external display, only my laptop.
Does anyone know what I can do to fix this issue? I would greatly appreciate any solution.
Thank you!

Yosemite Issues on Macbook Pro mid 2009

I have a macbook pro with a 2.8 Intel Core 2 Duo and 4 GB of Memory. I have more than enough HD space. Ever since I upgraded to Yosemite, I have been having issues with running my mac. It runs super slow, every program takes 5 minutes to open. If I open iTunes and iPhoto, I might as well walk away and come back later.
This issue only started happening with Yosemite. Is my system to old to handle it? Do I need to upgrade or what can I do. I'm a web designer and user Photoshop and all of the adobe programs a lot. I can't sit and wait 10 minutes to open a program, please help.
Thanks,
Francisco

Hey, I do not have the exact same problem but trying to update to 10.9.2 causes my macbook to be stucked in black screen + curser after boot up. I have looked through forums for an answer but nothing worked for me (such as reboot, reset NVRAM, disk verification, disk/permission repair, password entry, control-option-command+8, fresh osx 10.9.2 install). To be sure that my disk is properly working, I have installed the original snow leopard os, this worked fine. I also could access the recovery console.
To be able to use my mac I have now restored to 10.9.1 from my TM backup. Dont know if I should report this strange behaviour to Apple. Maybe there are others who have discovered the same issue?
Let me know pls.
cheers.
running on a 15"MacBook Pro mid 2009, Core2Duo 3.06Ghz

Logic Pro X and Yosemite issues

It seems I have some very basic issues with Logic Pro X 10.0.7 after upgrading to Yosemite OS on my MacBook Air:
1. Zooming the main window by swiping two fingers apart or together on the mouse pad does not work anymore.
2. Adjusting the length of audio regions in the main window does not work anymore. It works as usual on midi tracks, but when I hover the end of an audio region the brackets just do not appear. I have now used automation to silence the bit that I wanted to shorten, but that is more of a hassle.
I have tried restarting Logic Pro X, restarting the MacBook and looked for any settings that may have been changed, but to no avail.
Do these issues sound familiar to anyone? Any thought on how to fix?

1) Zooming
the zooming with the swipe gesture was always problematic, but it is now only happening in the Audio FIles Editor and to some extend in the Score Editor. All the other windows work fine on my machine.
2) Resize Tool
Works fine without a problem in the Main Window and the Editor windows. Of course, you can resize in the Audio FIles Editor.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Acrobat X and Yosemite Issues

I have been using acrobat 10 and OS Mavericks to manage my office documents using a Fujitsu scanner. After I upgraded to OS Yosemite, I have been unable to print any of the documents that I have scanned. The image of the doc will show up on the print window, but all I get is a blank page. My print drivers are up to date and I have even tried a different brand of printer with the same results. I had coworker scan a doc and email it to me (windows machine) and I can print with no problems. I can also scan an image as a jpeg and print. Troubleshooting with Apple did not solve the issue. Does anyone have any ideas?
Thank you in advance

1) Zooming
the zooming with the swipe gesture was always problematic, but it is now only happening in the Audio FIles Editor and to some extend in the Score Editor. All the other windows work fine on my machine.
2) Resize Tool
Works fine without a problem in the Main Window and the Editor windows. Of course, you can resize in the Audio FIles Editor.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Multi monitor issues with resolution(?)

At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.

Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP

Yosemite Issues (Possible Resolution)

Similar Messages

Maybe you are looking for