Youtube video in fullscreen mode exits after swiping application back and forth

I run safari on full screen mode. I open a webpage for example youtube, play a video, switch the video to full screen. Then swipe to desktop and when I come back to Safri the video is not full screen but shrinks to original size (small). This is a bit annoying actually, everytime I have to click to make it full screen and a shame that the whole point of switching/swiping is useless.
I have tried creating a new desktop and placing a fullscreen-video running in fullscreen-safari. Fails too.
Has anyone seen this issue ?

Yes, It is working, but It is getting me out from fullscreen of firefox too.

Similar Messages

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

Everytime I open a youtube video (embbed or not) I get a black screen and my whole pc crashes. Only happens in firefox, no other browser.

Newest version of firefox, and flash. Tried clearing cache. Been having this problem for a year or more.
No mater what I do, if I open a youtube video in firefox, my pc crashes. Black screen and I have to hit the manual reset button. No error report to send, no idea why this happens. It does not do it when using chrome.
Really irritating and going to cause me to give up on using firefox if I cannot find a solution soon.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Can you check the Windows event log to see if that gives any clues about the Windows crashes if you get a BSOD?

Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

hey please help!
i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Zoom while video recording (bug) - Video flickers back and forth on playback

Using iphone 5s iOS 7.0.2
If i zoom slowly during video recording, when playback the video, during the period i zoomed in or out, it just flickers back and forth (in and out). which ruins all the video.

I just tried it on my iPhone. Same specs. No issues. I'm assuming you're doing playback on your phone?
- JC

The box {cannot use app in safe mode} would you like to temporarily switch, I press continue and it goes to please log in, and these two boxs go back and forth not allowing me to continue the game like farmville etc.

the dialogue box says {we cannot continue with this app in a secure mode. Would you like to temporarily disable to an unsecured mode and you will be able to use the app at your next log in.} I push the "Continue" button, not the cancel button and it tells me to {Please log in, you are not logged in}. I will then log in and the original window as mentioned above comes back again. These two boxes go back and forth when I try to continue in any of the games on Facebook.

Hi thanks for all the concern and replies. I've tried all that.
I had just got it back from the shop last Friday. It was there for around two weeks. It was a faulty GPU (when you see garbled display that's consisten when booting it the GPU). I have a strong feeling it's related to the Lion install 10.7 or 10.7.1 and may be similar to reports of Mac laptops overheating. It's good the GPU is removable, it might have taken 3 week or a month if it had been the whole board.
It's a blessing in disguise though as with all or most cases because I also got to have the LCD replaced for excessive backlight bleeding (in my opinion), the dead pixel from the previous LCD isn't there anymore (though under the glass there're some smudges but nothing crucial). The backlight bleeding is still the same though in my opinion but at least it's new.
It's a great thing I bought Applecare. I didn't buy it for the iPhone because that's more durable (my iPhone 3G's 3 years old now and it's still solid. Although there are scratches and a crack at the back at the bottom, got sqeezed under the table I think when I sat). I think Applecare is a good recommend for things that get hot like desktop and laptop Macs(are the iOS considered Macs btw?) which are twice or thrice the price of iOS devices.
Gbu.

I just found out my credit score dropped because Verizon One bill put me through collections for my final bill that I never received and after almost two hours on the phone transferred back and forth they still could not confirm if I owe money or not.

After 2 hours transferred back and forth between billing, one bill, home and wireless no one could prove that I owed money. Wireless said I owed nothing and home said I had a credit for cancelling a couple days before the billing cycle but owed for wireless. After a three-way called between Home and Wireless and Wireless insisting I do not owe anything, the Home representative disconnected herself, the wireless rep promised me a call back the next day to get the other department online and to get everything resolved. No one called me back next day and the day after. Knowing this could go in circles and don't want to do anything bad to my credit, I paid the settlement amount to the collection agencies. Now I saw that my credit score got ding for an amount that Verizon couldn't prove that I owed. I should not have paid it at all. If someone from Verizon reads this message, please get back to me and get this resolved. After more than 15 years with this company, this is making me so frustrated. I liked Verizon services but at this point I am going to start looking for someone with better billing.

I called customer service, spoke to Verizon Wireless Representative but they cannot pull anything on my record. So after two transfers I asked to speak to financial services. Spoke to Ronnie Ext 5100. Representative was very rude, not listening, kept on insisting that since I paid the collection agency I cannot dispute. Said should not have paid the collection agency. Rep was over talking, not listing to me explaining my frustration of being on the phone for hours in November between Verizon OneBill, Home and Wireless and got nothing resolved, and that's why I paid. Said there's nothing she can do except to put a note to Credit Bureau that the account is paid in full. I asked to talk to a supervisor or a manager and she said no one can do anything else. I insisted and she asked me to leave a phone number to call back. After all the calls and speaking to many reps, this is the worst. Now I am back to square one waiting for someone to call me back. And my credit score is still one hundred points lower thanks to Verizon!!!

Command Button colors corrupt after switching back and forth from design view.

I would say my experience level with Access is "getting there."
I therefore don't thing I'm making a newbish mistake.
Has anyone else noticed this? As it's bugging me quite badly.
1. A command button has had it's color formatted (pressed, hover, etc. nothing fancy)
2. It works fine.
3. In my navigation form, if I switch to design view, then select a given sub-form... like "customers" - and switch back out of design view, to form view - then without fail, all customized command buttons within that sub forms' color will 'corrupt'
ie, change.
4. Closing and reopening the navigation form (ie, my main menu) restores it, but the same thing will happen should I go back to design view for the sub form.
5. Finally - this behaviour does not happen when switching back and forth between views on the original form that isn't a sub form in the navigation form. (Ie,. the main 'customers' form).
Can any clever folk give me a solution? :(
Thanks,
Eric Rowlands
EDIT - My apologies, I am using Access 2013 for a desktop database.

1) We will need to understand whether the issue is seen on any sample database.
2) IS this seen only on your system, we would need to check on other system also
3) If the issue is seen in all system & issue is not seen in the sample database then this could be database specific issue
4) As per my understanding the issue is consistent, we would need to find what is the VBA code or which code is used while designing this form.
5) We would need to see if the issue is seen only on that particular navigation form?
6) Is the button gets corrupt I mean to say non-usable once it get discolored ?
7) What is your end goal just in case if you are able to work on your database i.e. when working on the navigation form without going in design view is issue still seen there ?
8) Since when are you experiencing this issue ?
9) If possible please provide me the environment details of your system & Access application, whether the issue is seen only in access 2010 can we check in access 2007 or in access 2013.
I would really appreciate if you can answers the above questions this will really help us to isolate the issue further
in terms of technical troubleshooting after answering the above question I might come up with another question so that we can do extensive isolating the issue so the if required we can involve the developer also.

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly it and switch back and forth from video to still pics and while I may have filmed four videos sometimes Quicktime tells me that one of them can't be pl

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly the drone and switch back and forth from video to still pics and while I may have filmed four videos , sometimes Quicktime tells me that one of them can't be played . Checking the info shows that each of the unplayed videos was saved in the same mp4 format as the playable ones yet some of my most important videos won't play . It's getting very frustrating .

first; I use Perian, that helps even though it is no longer supported, (must have for avi files)
the apple-cores at apple have gotten very sloppy -- quicktime is a bit finicky and flakey.
example,   occasionally (when copy file from quad's card to hard drive) the avi will show up as a 'mov' file and qt plays it no problem and no conversion.
but that is very occasionally, most of the time qt won't convert the file,   -- iMovie won't open an avi without Perian installed , I don't know how that effects qt.
qt 7"pro" is no good either, (qt 10 does everything it does and for NOT the extra $35)
I have gone to VLC and MPlayerX for direct playback for drones and cameras.

Exported video's frames back-and-forth quickly

When I played my video in the studio playback, it was perfect. But when I exported it, when I played it, its audio was perfect, but the frames go back-and-forth very quickly. Can anyone help me?

We need to know a lot more if we're going to help you.
What version of Premiere Pro? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Tell us about your computer hardware. Are you using Mercury Playback Engine GPU Acceleration?

Can't play music on ipod and youtube videos on speaker mode after update

Hi people!
I just updated to version 3.12 yesterday and after which, i tried playing songs with ipod mode and the speaker was not working. Tried plugging on a earphone and was able to listen to the music. The same issue was encountered on playing YouTube videos on the phone via speaker mode. The speakers however works when someone calls and while communicating via speaker mode on a phone call.
I tried to do a system restore but was unable to revert back to the previous version 3.11 on my backup file. The same issues were encounter after doing a restore and notice that the phone boots up from a hard reset significantly longer and some ringtone files which shows already sync into the phone on itunes was not found on the iphone itself.
However just when i was about to give up, i tried one last time to reboot the phone again to troubleshoot if the speakers was the one causing the problem, I tried setting "Lock sounds" and "Keyboard Clicks" off and on again and was able to get the speakers working now for ipod and youtube. Thanks goodness the speakers wasn't spoiled.
But when i sync some of my music files back from my computer again and every time i hook up to charge my phone, the problems keep coming back...
Is there anyone encountering this problem too and any permanent solutions or should i just visit the service center for a peace of mind as i do have 6 months of warranty left...
Thank you all for your time. Regards...

Try the standared fixes:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults.

After upgrading to Mountain Lion it's not possible to play videos in Fullscreen Mode

Hello everyone,
after upgrading to Mountain Lion on my iMac (27 inch, Mid 2011) I got the problem, that every video or movie in full-screen mode jiggles after a while. I'm using my Mac as a TV with Elgato EyeTV - and usualy I use it in full-screen mode.
A complete new installation from scratch didn't solve my problem.
If the problem occurs, the processor idles ans the hard-disk activity is low.
Is there anybody out there, who can help me?
Regards,
Stephan

If the issue only occurs when watching TV (using Elgato) then it's an issue on their side. Try a browser window and if can view the browser in full screen mode then that proves the point. You can also create another user account, log into that account and see if the issue is still there. If it disappears then you have an issue in your normal user account that needs to be tracked down. If the issue persists then your issue is global.

Youtube video in fullscreen mode exits after swiping application back and forth

Similar Messages

Maybe you are looking for