Z1 RAM and other issue

I bought this Xperia z1 2 weeks back, in 4.2 version I was happy with this but after 4.3 upgrade I'm very disappointed, now my z1 getting only 400MB RAM FREE now sometimes it also getting 330mb, but before update my z1 getting upto 1GB RAM FREE and average 750 mb with 25 additional apps. now I'm really disappointed with other issues also camera performance is also average low light photography is also not good, again after upgrade I got many problems like other z1 users, and it gives me same details in both 8 mp and 20MP. pleas help, and pleas clarify my doubts friends
Solved!
Go to Solution.

For the kitkat issue,try contacting sony,but I do not think Z1 wil get 4.4 before the T,V and SP get 4.3.And for the camera,try settings-apps-all-camera and clear data.Restart the phone.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

MSI Eclipse with 12gb ram only posting 8gb (and other issues)

I have several issues with my eclipse motherboard, the first problem has to do with RAM Dimm slot's AO, A1.
PROBLEM 1
A little back story on the situation, earlier today i adjusted my green power genie to max power cooling - it down clocked the voltage for the ram and cpu. after i installed some security updates for windows 7 i powered off the PC. I turned my computer back on 30 minutes later, i noticed a weird bios error message "previous overclock has failed, please reset your setting to default". I then reset the CMOS on the motherboard to undo the previous settings. I booted the PC up for a second time, then noticed the post screen with my system specs, had my ram at 8GB when i had 12GB installed. I then went into the bios(1.b)and pressed F5 to view my Ram total. It showed four slots posting 2gb per dimm except A0, A1.
I went through the normal troubleshooting (removing the cards and HDD's, reseating ram in different dimm slots.. etc)
I remove all ram except one 2gb stick. i reinstalled the 2gb stick in the black dimm a0 slot and booted the system. it will power on, stays on for a minute and half then power cycle(reboot over and over). i then tired 1GB stick in the A0 slot, same problem. The system with boot in the other two black slots (B0, C0). the same problem is with the blue A1 slot as well.
Could it be a bad board that i have? or is there something i'm missing.
PROBLEM 2
I have four cards that i want to use on my system, Two HD5770's in crossfire, my sound blaster XFI Fatl1ty Champion in the first (PCI-E x1 slot) and my TV tuner in the first PCI x8 slot. the problem is getting them all to work at the same time. if i install all of them together the system will not get past the black windows screen(it freezes). if i use a combination of the three, the system will boot up with no problem.
Anybody in the forums with an eclipse able to use four cards and crossfire at the same time?
Could i have a bad motherboard?
What is RMA? is it a replacement or repair?
I NEED HELP!!!!
My specs are
Windows 7 HP 64bit
Intel I7-920 Quad Core
(12GB) 6 x 2GB OCZ 1600/12800 XMP Triple Channel RAM
MSI Eclipse LGA 1366 X58 Intel Motherboard
Cooler Master -V8 heatsink
Thermalright IH-05 IFX
Sapphire ATI Radeon HD 5770 1GB 128Bit GDDR 5 x 2 CrossFire
Antec TPQ 1000W 80PLUS
Creative Labs Sound Blaster X-FI Titanium Fatal1ty Champion
Diamond ATI 650 Pro Dual HDTV Tuner
Samsung -22X Lightscribe DL DVD Burner/ Sony - 16X DL DVD Burner
500 GB Western Digital HDD 1 TB Seagate HDD , 1.5 TB x 2 Seagate HDD 32 MB (4.5TB Total)

Quote from: HU16E on 12-March-10, 15:03:22
Have you tested each of them individually? What are you setting the RAM speed & timings at? Unless your running Photoshop or similar heavy apps., 12G RAM is a negative IMHO.
nothing really heavy, but i do multi-task and have a lot of apps/ games/ benchmarking going on at once. firefox uses a lot of ram on its own. i have around five sets of 3 (2 sets 6gb and 3 sets of 3gb) and none of them work in the a1, a0 dimm slots. the memory controller probably burned out. i dont see how that can happen as i dont overclock regularly.
Quote
Other thoughts. What is the current bios version?
- i updated to 1.11(1.b)
Quote
Does the board support 1.5G TB HDD's?
Yes - i believe so, the bio's recognize all 4.5tb
Quote
More voltage is needed more than likely to the CPU, QPI, RAM, IOH, & ICH or a combination thereof rather than using a utility that is trying to reduce it. You have a lot of stuff to power up.
it only down clocked the cpu to core 0.00v/qpi 0.00v, PPL voltage 1.6v and memory to 1.65v , IOH to 1.02, ICH 1.35v
Quote
If this is a brand spanky new build, it may be best to establish a stable system in a bare bones configuration, & then add components making any note of any areas that may need a power boost or settings adjustment. To sum it up, CPU has developed a problem, RAM is faulty, board DIMM slots have become faulty, bent socket pins, voltage distribution is faulty or needs tweaking.
i have done most of your suggestions, but all of my test is pointing to a faulty motherboard. i mean the board has 7 pci slots of which 3 work when in crossfire. the x-fi sound card that came with the board came doa, so i should have been more cautious from the beginning and returned it to newegg then. now i am going to have to RMA the board and be without it for close to a month. its frustrating

Video playback and other issues

This might be a 10.6.4 issue or it could be hardware, I'm not sure.
*First Issue:*
Oftentimes, when I try to play video on my Macbook (stats included) the video hangs up and the audio skips like a bad record (remember records? ). This problem is particularly bad when playing videos from the internet but it persists even when the streaming bar is fully loaded in the browser. I took an online masters course this summer and constantly had this skipping issue so I thought it was Adobe and Apple not playing nice since their videos were Flash based. Now, I can see that the problem also occurs when trying to play Quicktime videos. I made an iweb site with a few videos and my Macbook can't seem to play them. However, when I go over to my Mac Mini it has no issues and it has the same processor in it and less RAM.
I know what your thinking; 'check the activity monitor.' I do check the activity monitor, constantly. When this problem occurs I'm never using more than 50% CPU and I usually have at least 1 GB of RAM available although the problem has manifested itself with a much as 2 GB of RAM available and minimal CPU usage.
This issue is starting to get worse and I've had a few kernal panics lately, which may or may not be related.
At the beginning of the summer I reinstalled the system from scratch to see if that would solve the issue; no such luck.
I thought is was the RAM so I tested it with Techtool Deluxe. No problems found with the RAM.
Now, this issue might be related to the second issue but I'll let you decide.
*Second Issue:*
This issue has been around for a long time and I've largely ignored it since all the forums I've been on don't know what to do/can't pin it down.
The issue is that the fan runs constantly at a high RPM no matter what I do.
Again, I check the Activity monitor consistently and I have it set so I can view "All Processes." No 'memory hogs' running.
I also have smsFanControl running and set for 1800 as the min speed.
Furthermore, my wife has the same model computer (only manufactured later) and hers runs whisper quiet while mine sounds like a wind tunnel.
In fact, as I type this I have 1.29 GB of RAM free, 97% of my processor is idle and I'm running at 65C with a fan speed of 6200 RPM.
Any thoughts on either of these two issues would be a help. Thanks

DaddyPaycheck thanks for the info. I am have 7 GB of RAM and my internet access is through cable. I never had this problem before with an older computer with the same internet connection. I am not sure what to do. I recently upgraded to the 30" monitor and a new video card. I purcheased another video card, the ATI Radeon X800XT, but I haven't installed it yet. I am not sure that this will fix my problem. I have all the latest updates for Quicktime and Windows media player. I actually does it when I am playing DVD's as well.

Kernel panics, crashes and other issues

hi all -
i've been reading through tons of posts over the last week about my issue and trying to resolve it but can't seem to get my machine up and running consistently.
it started crashing consistently on jan 10 - suspiciously the day the itunes update came out - and i have since run the fixes people posted relating to that update to no avail.
i keep getting kernel panics - while i'm running photoshop, safari, word, textedit, ical, etc. i took it to a mac authorized repair shop, but they gave it back to me saying they couldn't duplicate the issue described. it started happening again right away - i unplugged everything except the keyboard and mouse. still got them. have run disk utility from the startup disks several times.
one thing i noticed was it seems to repair the same problem every time - "invalid extent entry". i found a post on this board that said only disk warrior can fix that problem in 10.3.9. disk utility says it fixes it, but it comes up every time...
also - after i downloaded and ran onyx it seemed to be better for the last two days. and then today i plugged my scanner in and tried using it. it crashed photoshop and then everything else started crashing even though i unplugged the scanner. i tried looking for a driver update for it, but os 10 couldn't open the file i downloaded from epson - which was:
TWAIN Driver and EPSON Scan Utility v2.65A
Macintosh OS X (v10.2.x - 10.3.x)
epson11385.sea.hqx - 34.2MB - posted on 04/18/05
a window popped up that said the file didn't appear to be compressed and i should get more information from the manufacturer. i read on this forum that bad drivers can cause kernel panics, but i can't seem to load the update. i also trashed my epson printer driver for good measure.
1) so my first question is: could the invalid extent entry problem be causing kernel panics? or are the two unrelated? should i definitely download disk warrior to fix that?
2) also something i haven't been clear about regarding repairing permissions - do you have to boot from another drive to repair permissions? my internal drive is my startup disk, and i don't have a bootable external drive. i tried repairing permissions with onyx, but it crashes every time. is this because i need to boot from another disk? how do you do that and run onyx?
3) has anyone had the problem with panther not opening the epson 4870 driver update?
i've been trying to solve this for weeks...i'm about to swear off technology altogether and move to the mountains.
thanks for any suggestions you might have!
slowjane
g4 gigabit ethernet powermac dual 500 mhz processor Mac OS X (10.3.9) epson 785epx printer, epson 4870 scanner
g4 gigabit ethernet powermac dual 500 mhz processor Mac OS X (10.3.9)
g4 gigabit ethernet powermac dual 500 mhz processor Mac OS X (10.3.9) epson 785epx printer, epson 4870 scanner

You are doing fine. Don't beat up on yourself (bad ram will do pleanty of that by itself).
Until you get the ram figured out there is no hope for a stable system. If you have bad ram then it will corrupt the system as fast as you can repair it.
If you have the hardware test disk it has a ram tester that can, depending on the system and disk, run in extended(on the menu) or looped mode(command l). It usually reports which stick of ram is bad. On a desktop this is a big deal.
On a laptop it is much easier. You usually have a limited number of ram slots. I don't know what mac you are running because you have not filled out any of the info for your profile.
Pull all but one stick of ram and run on the other to see if that helps. If no change, run on the other stick and see if that helps. If all the ram is non Apple then it could be either. Apple ram is usually, but not always, good ram that stays good. By the way, with the dry weather we are having it is important not to risk static zapping of your mac. The easiest way to ground yourself is to be bare foot then touch the power supply case or other metal interior surface of the computer before tackling the electronics.
I like Crucial Ram but OWC also has a lifetime guarantee and they stand behind the ram. If the vendor of replacement ram has a bench tester then that is the best you can do without putting the ram in your mac.
Once you get good ram in your mac then concentrate on the system. In my opinion, Disk Warrior is the only utility that one needs to purchase for X. It can keep fixing your directory but if the ram is bad X will keep getting corrupted again.
That the permissions are not running off of disk is, yes, a bad sign.
When the ram is replaced;
If you have a backup hard drive I'd make sure that it has, at a minimum, all your user data. You can also do this with cd/dvd's.
Reformat the hard drive and zero it to map out bad blocks.The system and applications can be reloaded later and your user data can be imported to the clean, new system. That is what I would make my mind up on doing.
It may be possible to keep your current system running with good ram and Disk Warrior but the odds are that some files have been corrupted and will rear their ugly heads in the future.
Just my 2 cents.

Power Mac G4 (sawtooth) AGP - Firmware and other issues

Hello,
So I was given an older Power Mac G4 AGP which I've been using while my Power Book G4 gets a logic board replacement but I've been having some issues with the AGP unit. How do you check to see what version of the firmware you have? I read a firmware update but it requires OS 9 to launch and I don't know if I need this or not. The other issue has been when I tried to run Firefox after successfully installing it. Firefox doesn't launch, it just opens and then closes. When I use Safari, the browser will work for about a few minutes but then it will freeze and I need to force quit it. I am running 10.4.11 and I was thinking of installing 10.5.6 but I'm not sure if this is possible with the Sawtooth. Do I need to upgrade the processor? Any advice or help is appreciated.

Hi, veesh678 -
Early models of the G4 (AGP) models came with OS 8.6; later models came with an installer for a model-specific version of OS 9.0.4. The latter disk will have a blue-gray label, be named "Power Mac G4" with a subtitle "Software Install", and has a part number of 691-2657-A (the part number will be in fine print on the right-hand side of the label).
Non-current firmware will not preclude the machine from booting to that CD; a retail OS 9.0.4 Install CD (white label, gold 9, no model named) probably will not work, although a retail OS 9.1 or 9.2.1 Install CD should work fine.
The current firmware version for the G4 (AGP) model is v. 4.2.8, which can be downloaded from this article -
Article #120068 - G4 Firmware Update 4.2.8
Note that to install that version the machine must be booted to OS 9.1 or OS 9.2.x from its hard drive, and the firmware update must be run from the same hard drive.
Before installing firmware update v. 4.2.8, download and run DIMM First Aid (it's a free download) to verify the compliance of the RAM in the machine.

Mega 180: MSI DVD Writer DR-16B and other issues...

I just get hand on a MSI DVD Writer DR-16B and installed it on my Mega PC unfortunatelly whenever i open the tray using the mega pc front panel button it will hang my mega pc badly and i have to reboot.
However i found a trick: It will not hang if i open the DVD using the Drive button, it is not convenient but at last works...
Other issue i have with my Mega PC:
* If i connect my USB bluetooth dongle the mega PC will not boot
* Sometimes after booting i loose the sound (nvmixer wont load complaining there is no nforce sound chipset on my mega pc !!) and i have to unplug the power for a while to get it back
* The remote control is crappy unless you can stay 2 meter and aim exactly at the mega pc...anybody found a replacement ??
* The last one was one of my RAM was corrupted and make my PC crash every days or so and corrupt some of my files on the HD :( :( it took me 3 months to find the problem....
Do you know if MSI have any plan to fix these issues some days ??? i am getting tired and thinking of replace my Mega PC with some shuttles ....

Thanks for the advice and here are my reply:
For DVD i want a 16x DVD writer i already tried several devices out there and this one will be my latest try..i can accomodate to eject with the drive button for now...I was hopping that using a MSI model would make it compatible but this one is not... :(
For missing sound devices i use the latest nforce drivers and i already found the root cause on this forum, it seems that if you start the PC when the HIFI mode is already open it will lock the sound device in HIFI and the PC mode cannot find it. The solution is to switch off HIFI mode BEFORE going PC mode...well weird
For USB bluetooth well it would have been nice to leave it all the time because i use it to synch my sony erricson P900 anyway i heard that it is a bios firmware problem so i am back to sync with the phone craddle (USB craddle but this one will not freeze the boot) The USB bluetooth is a PCI GW-BH02U.

RAM and other Q's for MSI k7n2g-ilsr

I had a friend buy this board and he got kingston ram and the kingston ram failed on him so he got CERTified samsung ram and i thought IM not paying :O $150 for 512 RAM. X(
I saw the Article about ram recommendations for this board but im paranoid you could say. I want to buy either cosiar 2 sticks of 256(Model#: CMX256A-2700C2 ) or could i get 2 sticks of 512 coaisar ram (Model#: CMX512-2700C2 ) and I want to be able to use onboard video for a while then pick myself up a radeon 9700 or a 9800 pro and have no conflicts ? PLease email me or post a reply . Oh and is this board come with IDE 100 or 133 ?
THe only thing wrong with this board is that the audio connector is in the way if you wanted to put a pci card in that slot. )
:P BY the way Im upgrading from a kt266 msi motherboard with 512 RAM, Amd 1700 and aN Ati 9000. :P

You can read the specs of this board on MSI's website directly to answer those types of questions...
Reagarding your memory, don't take my post lightly as most ppl have had major problems when buying cheaper memory for this board...it's up to you what direction you want to go in regards to this...have problems or don't...Mushkin is a great buy for it's stability and O/Cing ability if that's what you're into...
Most of the ppl are rolling the dice with any of the nForce2 boards out there right now being that they're new on the market, if you want assured no problems go with something a bit older and that should be cool...
I wouldn't rely on using the onboard video if you plan on gaming...most are having issues with it...
MSI and ATI are working on a known issue with Radeons and this board right now and hopefully will release a new BIOS to fix it soon...only have problems on the 1.3/3.4 ILSR/IL versions tho...
There are other issues regarding this board, do a search on this forum and you'll read for days heheheh
I did like this board when I had it working tho (I haven't tried to fix it yet so...) it was fast and the sound was great!! Overall I like the board, but you can't skrimp on memory costs or PSU cause this board is power hungry..
Cheers!! 8)

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

HP Spectre x360 13-4002dx active pen and other issues

Hi, I'm havng issues with my active pen, but wasn't sure if it's an issue with my laptop or stylus (or if it's a software/driver issue). Is there an easy way to tell?Also, I've been using my laptop for a month now, and recently have had other issues, listed below. I wrote them down below in case that could provide some information, and/or if those issues are something I should be concerned about and should try to fix. To begin with, after doing some research, I bought a Synaptic active stylus (the Dell one), which worked very well for the first two weeks until last week. All of a sudden, it started to respond very awkward and randomly, sometimes it's too sensitive and draw lines even when the pen was off the screen, and sometimes it didn't draw anything at all even though I see the small circle following my pen tip. I initially thought it was due to low battery, but it's the same issue after I replaced the battery. Right now, the laptop doesn't respond to pen touching the screen (no clicks, no writings), although the pointer follows the pen. Any ideas on how to resolve this issue? How do I know if it's the pen that is faulty or if it's the laptop? Other issues I had or am having:1. Today, I had a BAD_POOL_HEADER error and blue screen of death. After reboot, everything seems to still work, but the login is now much slower. It's very fast to reach to the login screen, but it takes 2-3 minutes to bring up the desktop and other startup applications after I enter my password (I think it used to take less than 10 seconds). I tried rebooting 2-3 times, and it was always the same. 2. The laptop seems to gain heat very easily. With moderate workload (example, some websites with flash advertisements or videos), it can easily go above 70 degrees Celsius on either core (according to CPUID HWMonitor). One time, the system actually failed and forced hibernated due to overheating. (To me, the screen went blank all of a sudden. I turn the laptop back on, and the screen printed a message for a while saying it forced shutdown due to overheating. I realized it was hibernation after I logged in since I see all my windows) 3. On the second day of use of this laptop, the laptop just shutdown for no good reason, and then couldn't boot, saying it cannot find boot image or something like that. I looked up the web and found that it could be a BIOS issue. It said to try reseting the BIOS setting, and then it worked. I also upgraded the BIOS image to the latest after this incident. 4. This is probably more a router issue, but I initially had problems connecting wireless to my router. It was solved after changing my router. For those who are interested, the details is as the following: my old router supported up to 802.11n , but not 802.11ac, That shouldn't matter, but all wireless connections get disconnected once in every several hours if my HP Spectre x360 is trying to use the wireless. However the wired connections stayed ok when this happens, so the router is only "partially" killed. The fact that all wireless connections are getting killed seemed to me that the router didn't like something from my HP laptop. To be fair, I didn't try not using my HP laptop to see if the issue goes away, so it could be a coincidence that the router started to go faulty at the same time I bought and used my HP laptop. Anyways, it seemed it's a router issue, so after replacing the router. the issue went away. Thanks.

Will investigate and let you know what I can find out.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

C309g (CD055A) no black and other issues..

Hey all.. Not sure which thing to post about first, so in random order, here goes....
I bought a used printer listed above in the subject.. It needed a new power supply, and ink, but seemed to be great. I purchased the regular size cartridges except the black which they had in XL size. I printed a total of 3 test pages (set up on three computers), I printed one 8x11 photo via bluetooth from my phone, and my wife printed 2 8x11 photo's from her PC. All 3 8x11's were on regular paper. Oh, and we printed one of the dots built-in pages.. So if you're counting (and I KNOW I am), that is a total of 7 pages. Additionally there may have been one demo page (possibly a total of 8 pages, then!), can't remember if I did that demo page on the previous owners ink or if I did one on the new ink I bought (previous ink was old/empty). Oh, and technically there was an alignment page, so final total 9 pages. After those nine pages, my magenta and yellow ink were both down to around 65-75 percent. It sat a week without use (literally, 7 days). Today I went to print some regular text (black only) and it shot out at me blank pages. I tried a few more times, and nothing but blank pages. Tired of running back and forth, I printed a built-in "school paper" page or wide ruled paper (heh, how cool in a pinch is THAT feature!). It printed perfectly - Course it's blue and magenta, no black..
So it's been awhile since I used inkjet, but I quickly rememberd the handy utility to clear/clean printheads. Ran that. It failed, assumedly for missing black (it had the gray'ish photo black, but not 'black' anywhere on the sheet. After the cleaning failed, I removed the black, and all the colors. Seems to be black in there (as should be!) I dabbed the bottom with a paper towel gently, it turned black... So I put it in, and it whirred away doing it's thing to re-align, and then it told me the shocking news that my printer was low on ink, and showed all levels to be well, I suppose about 10-15 percent remaining (think SMALL skinny lines). Now I know this is an estimate, but I'm concerned from the get-go that after only 9 pages it was down to 65%!!
Before I found the forums, I found a site that recommended removing the ink cartridges, and removing the print head itself and soaking the bottom portion (up to the wire meshes, slightly covering them, but not the entire thing) for awhile in IPA (isopropal alcohol) and then dipping them in fresh a fresh batch to 'rinse' then gently hitting them with compressed air via air compressor (or canned air, I suppose, have an air compressor) to remove any debris and get the remaining alcohol off/out. I then let it sit several hours to 'dry', which - it was probably ready immediately given the properties of IPA, but didn't want to chance it.. Re-inserted it and the ink, and..... SAME THING.
All the ink is official HP ink (since I'm sure that q is coming), was purchased from a big box retailer who ya all know and love or hate (no need to name drop).. I'm wondering if...
1. My ink, though coming out onto the paper towels could be bad/defective. Given the really fast drop in the levels of ink, and the issue with black not seeming to print, seems possible?
2. Should I try the boiling the print head - err not boiling it, but sticking it in recentyl boiled water, and give that a try? The guide that was posted here somewhere showed doing that, with IPA added to the water as an option. Is it possible the IPA didn't break up whatever gunk might be blocking the black, that boiled water might break up? Does that make sense, or would the IPA have broken it down?
How do these print heads work exactly, or is that the big company secret? I mean, is there a tube that goes for the inlet of black to the gold area underneath, cuz it's not directly under the gold like old fashioned cartridges used to be.. Is there any way to open up or access that area like, under the metal screens to get in there with a pipecleaner or something maybe, or something?
And, for bonus points (lol) Why does HP assign two names to their printers?? IE C309g (CD055A), If my printer is the C309g, why is it ALSO the CD055A?? SO confusing and un-necessary..
Thanks for your time and patience

I've had a similar problem with black not printing, though my printer is a B8550. I bought new and have used it fairly lightly I'd say, but after only a couple of years it suddenly stopped printing the photo black (it has separate cartridges for black for photos and black for text, etc.).
It prints on regular printer paper just fine using the other black--but not a drop prints of the Photo Black (yes, it's full). Since I've cleaned the print head, and even bought a new one, and a diagnostic print shows absolutely no trace of the photo black, I'm fairly sure the printer itself is at fault. It's sold as a 'Photosmart' printer, meaning it's intended to use to print photos--large format too--so without photo black it is a huge brick as far as I'm concerned.
I've begun to notice from these forum posts that there is an issue with HP and black ink, or at least whatever controls black for photo papers in their inkjet printers. If I'm not mistaken both yours and mine use the 564 cartridges, so maybe that suggests a common factor in such printers that is the culprit. I suspect HP knows there is a problem, either with the hardware or firmware, and I wish they would do right by us.

RV042G Log Email and other issues

The RV042G manual said to use this site for support so here goes. After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01. Overall the RV042G hardware appears to function pretty good. The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082. I have now owned the RV042G about two days and have found a number of issues. Specifically, emailing logs doesn't work.
- Emailing logs does not work. RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password. I have tried SMTP servers that require no authentication and ones that do, none of them work. RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not. Additionally, there is NO output in the logs to show a failure. So TWO bugs here. I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
Email is my primary issue, any suggestions on getting this working would be appreciated. I've also identified a number of other issues as well and included them here to avoid multiple posts. These are:
- Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com). This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
- Port 1 is CLOSED and apparently responds to interrogation. This was NOT the case for the RV082. Normally I would be good on the RV082. I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance). BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries. So there are TWO bugs here. This is a potential security vulnerability.
- The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs. Another poster identified this problem so this is confirmation of that issue. Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning.
- Authentication failures will show up in the System Log but not in the Access Log?
- HTTPS html interface works fine in Firefox. However, turn it off and use just HTTP and there is a problem. Can't see the forms and buttons, can only see the background image. This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
- RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01. Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with. Here is what the firmware update page shows:
"Cisco RV042G Dual Gigabit WAN VPN Router"
"Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)".
The problem is that you reset the hardware version in the RV042G (V01). Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01.
I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature). The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

Guess I spoke too soon. If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443. So have to use an access rule to kill it off. Can STEALTH Port 1 as well with an access rule but have to block all traffic there. Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead. (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall. No response at all. Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address. The port still shows up as OPEN but won't connect. Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
For clarity, I have the RV042G V01 with Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55).

Scan app not opening and other issues

Hi,
Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
Thanks,
amycdero

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

DNS and other issues with SBS Server 2003

I see a lot of excellent information out here in the discussion group but I understand little of it. I am technology savvy but not an IT man, so please be patient when I ask questions to clarify your responses.
My first question should be an easy one to answer. Has anyone told you all that they appreciate your help today?
I DO !!! Thank you for your kind nature and your choice to help others (like me)!
Our 2003 SBS server has multiple issues. The server has two NICs; one for the WAN connection and one for the LAN.
Windows IP Configuration
Host Name . . . . . . . . . . . . : mathewsserver01
Primary Dns Suffix . . . . . . . : MathewsElectricalInc.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : MathewsElectricalInc.local
Ethernet adapter Mathews Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #1
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E7
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
Ethernet adapter Network Connection to Router:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E6
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.yyy.xxx.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.yyy.xxx.1
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Disabled
#1 In Event Viewer (Local) Application I have recurring event Source=Userenv Event 1053 every 9 minutes.
#2 In Event Viewer Directory Service I have recurring event Source=NTDS General Event 1126 every hour.
#3 In Event Viewer DNS Server I have recurring event Source=DNS Event 6702.
Also, I am surprised that the LAN NIC #1 is not set up as DHCP!
What information may you require to assist me?
tmath2 in Houston

Hi,
Could you type “route print“ on CMD, and post the result here?
It would be helpful if you may describe the phenomenon of the problem? such as changes before the problem occurs, any prompt error message, related operations except for these logged Event ID.
You may reference the link below for reference.
Event Source Userenv and Event ID 1503:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=1053&EvtSrc=Userenv&LCID=1033
Event Source NTDS and Event ID 1126：
http://support.microsoft.com/kb/305837
DNS 6702：
http://technet.microsoft.com/en-us/library/cc735806(v=WS.10).aspx
Best Regards,
Eve Wang
Thanks Eve! I appreciate your attempt to help. I inadvertently posted my reply for the Route table without quoting you first. Sorry about that.
As far as the problems go, time to logon to server > 5 minutes. Group Policy issues abound. DNS issues (as mentioned). Thought I had an easy one for you. Sorry about that.
I have one client computer running Windows 7x64 (call it My Workstation) that I back the server and other client PC's up to. The clients have no problem, but after a day or two, the server can no longer "see" the My Workstation and the backup fails.
But then when I reboot the My Workstation, the server "sees" it again!
Furthermore, I backup a 10TB RAID 6 array on
My Workstation to yet another client for redundancy (Call it WORKSTATION2-PC), but if I try to click on the computer icon in Windows Explorer for WORKSTATION2-PC, I get the error "Windows cannot access \\WORKSTATION2-PC. However if I type in
the ip address or WORKSTATION2-PC, I have no problems.
tmath2 in Houston

Z1 RAM and other issue

Similar Messages

Maybe you are looking for