Zalman CNPS9500 + Corsair XMS3500LLPRO and Neo2 Platinum Help Needed!

I have just received the memory in my sig and need to install it in Dimms 1&2 closest to the cpu because dimm 4 is going bad I think? My old ram XMS 3200LL 2x512 has been running  Dual Channel in slots 3&4,  recently my PC has been getting random BSOD and taking a long time to get past the black w/ windows boot screen. If I put memory in slots 1&2 the problems go away.
Anyway, this new memory is the Pro and it is too tall for slots 1&2 so I need to know if the new Zalman (http://www.frozencpu.com/cpu-zal-19.html) will block the ram slots ? The Zalman I use now prevents me from using my new ram. Or, should I try to modify the fins to allow the needed clearance?
THX,
Plumbergeek

Quote from: Bas on 30-January-06, 09:23:22
I don't use water myself...I like beer better
i've tried that, but i always found the reservoir empty after a good party night  . must be leaking somewhere 
now, i think that the best option for a heatsink and fan would be the xp-90 coupled with a panaflo or papst fan. there's nothing that beats that combination at that price. for water cooling, there are many options out there, and everything depends on the budget. you can get kits ranging from 80$ to 300$ or more. so it might help if you can give us an idea on the budget you have for spending.
btw, the amd stock cooler is quite good, i was really amazed with what it can do (check my sig). compared to the intel stock hsf this one is in a different league.

Similar Messages

  • Corsair XMS and Neo2 Platinum

    Ok, here the situation. I have recently put together a new system.  My RAM (Corsair XMS PC3200C2 DDR400) is being read as DDR333.
    Do anyone know how I can fix this?
    Here's the specs:
    MSI K8N2 Platinum
    Athlon64 3500+ (S939)
    Corsair XMS CMX1024-3200C2 (2x512)
    BFG 6800GT OC

    update your bios to ver 1.2 or above - worked for me
    Otherwise u could also try the following
    Set memory speed to 200Mhz in Cell Menu (In the BIOS)
    Try using slots 1 & 2 for memory
    Try setting the default voltage a bit higher.
    I think the best thing to do is boot from ONE memory stick - Update BIOS - then stick the second memory stick back in.
    hope this helps - if u still have trouble try running memtest on each individual stick

  • MOVED: MSI K8N Neo2 Platinum (HELP!)

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N Neo2 Platinum (HELP!)

    Well we now know the motherboard... what about the rest of the components in the computer. When including specs on the powersupplies (post both the 400w and the 480w) include max amps for the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
    Do you have the D-Bracket installed? If so where is it hanging at?
    Good Luck
    Jeremy

  • MSI K8N Neo2 Platinum (HELP!)

     Hi
    Ive just bought a MSI K8N Neo2 Platinum motherbaord. When i try to power my pc up nothing happends. All i get is the green power led flashing on my tower. I dont get any fans spining or any other action.
    omg whats wrong..... plz help !

    Well we now know the motherboard... what about the rest of the components in the computer. When including specs on the powersupplies (post both the 400w and the 480w) include max amps for the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
    Do you have the D-Bracket installed? If so where is it hanging at?
    Good Luck
    Jeremy

  • Demoting a DC and Group policy, help needed.

    Hi all,
    so we have 3 domain controllers, lets say dc1,dc2 and dc3. We have the 3rd line assistance from another company, they have advised the following.... 
    SO the stages will be
    1) Can you please go through all the GPO's in DC3 and consolidate what you need and what you do not need, you need to extensively cross reference this with DC1 and DC2, this is something you have to do. As I will not know what you need and what you do
    not. You can do this by logging into each domain controller and opening up the settings of each GPO and cross referencing.
    2) Once the above is done, we will consolidate the GPO's to a central repository in your domain
    3) Backup Sysvol directory and Netlogon folder in DC3
    3) Proceed to dcpromo DC3 out of the domain
    4) Test connectivity if clients to the AD
    5) Add the additional Server options
    6) All of the above can be done during office hours.
    it was my understanding (perhaps wrongly) that the group policies were not on the individual Domain Controllers but in Sysvol and as such replicated anyway?
    any advice would be very much appreciated.

    > I am being told that our Group policies are different across different
    > Domain Controllers and to my knowledge that's impossible as we have
    > discussed it should be in the replicated Sysvol.
    Ok, that's a common problem. Fix it and you will be fine:
    http//support.microsoft.com/kb/2218556 (for DFS-R Replication of Sysvol)
    http://support.microsoft.com/kb/315457 (for NTFRS replication)
    > I'm a bit lost on the central repository aspect but prior to saying it
    > makes no sense I just wanted to check my understanding, especially with
    > an MVP!
    I agree. Talking of a "central repository" fro group policy doesn't make
    sense, because group policy from the very beginning lives in AD and
    sysvol, which both are kind of "central repository". Seems they don't
    really know what they're talking about :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Thermalright XP-120 and neo2 platinum

    Has anyone tried to use this heatsink with a "platinum" series motherboard?
    I have a neo2-pfs platinum.
    I emailed thermalright about the fit of the heatsink and got this response:
    "XP-120 will fit your motherboard if you can tilt 4 capacitors away from CPU socket to clear the heatpipes loops.  the underside of XP-120 fin will clear up to 38mm tall chipset cooler."
    Does anyone know if this height is tall enough to clear the stock passive northbridge heatsink on a platinum series?
    I guess I could always get a shorter cooler for the northbridge.

    the way the caps are laid out, the tilting is VERY minor, so I don't believe this will be much of a problem.
    I don't think it will be able to clear my northbridge heatsink though.  May have to replace it with a shorter passive cooler. (which will be ok because it will get plenty of air from the fan on top of the xp-120)
    here's a link to this cooler.  anyone thought about it for a platinum series board?
    http://www.systemcooling.com/thermalright_xp120-01.html

  • K8N Neo2 Platinum help

    I recently purchased the K8N Neo 2 Platinum and an AMD 64bit 3000+ processor.
    The problem I seem to be having is that the system cannot see the SATA drive that is connected. I specifically only want to use this drive for storage...the windows driver is already installed but the drive isn't showing up.
    When I configure it in the BIOS, the settings are:
    IDE RAID > Enabled
    SATA 1 > Enabled (as it's connected to SATA1 on the m/b)
    SATA1 DMA > Enabled
    When the BIOS if loading up it seems to show that 'no disk reserved for RAID, RAID disabled'.
    What am I doing wrong?

    Are you trying to do RAID config? If you're doing the RAID pls enable the raid function or else disable it!! Then what about your booting drive priority? ie cdrom\hdd\floppy?? Tried to checked with your SATA cable whether is it loosen or improper plugged?
    BTW list down all your full spect's including the PSU in details and put it into your SIG as other ppl might need this info to help your problems!! Gd luck..

  • CoreCenter with an AMD 3000+ s939 and Neo2 Platinum with 1.4 (original) bios

    hi everyone, ı think ı need some help. I install Windows Xp with SP1 and ı downladed and installed the nforce drivers (5.10 version) from NVidia's site not MSI's. C'n'Q function is enabled in the bios, I install AMD's latest XP driver and set"minimum power consumption" from power options. And finally ı install CoreCenter. My question and problem is; Cooling function i think works (as ı see from CoreCenter and windows) temps go up and down but Quiet (fan speed) function [I mean CPU (~3183 rpm) an NB (~5113 rpm) fan speeds always go up of their full limits] only works when I enable the C'n'Q option in CoreCenter; the program is not adjust fan speeds automatically for lower noice, I have to enable C'n'Q option in CoreCenter every time ı restart my system.What's wrong? MSI's nforce drivers and C'n'Q ı think works before I format the system. Please Help 
    thanx for replies

    When you are using CnQ the system will automatically reduce fan speed (at least it should) when it is in the reduced operating mode. Your core clock goes down and your effective speed (MHz) also goes down when you are surfing or doing non-demanding tasks. If you start playing games  or doing anything cpu intensive the system should revert to it's highest setting which includes the fans on high speed. If you are getting abnormal behavior with Core Center you can refer to the many posts on that subject. Core Center has many bugs and Known Problems. Most people including myself chose to use other software for this purpose. If it works for you, go for it.

  • Unicode and ascii conversion help needed

    I am trying to read passwords from a foxpro .dbf. The encrpytion of the password is crude, it takes the ascii value of each char entered and adds an integer value to it, then stores the complete password to the table. So to decode, just subtract same integer value from each chars retieved from .dbf. pretty simple.
    The problem is that java chars and strings are unicode, so when my java applet retrieves these ascii values from the .dbf they are treated as unicode chars, if the ascii value is over 127 I have problems.
    The question. how can i retrieve these ascii values as ascii values in java?
    Should I use an InputStream like:
    InputStream is=rs.getAsciiStream("password");
    Is there a way to convert from unicode to extended ascii?
    Some examples would be helpful, Thanks in advance.

    version 1
    import java.nio.charset.Charset;
    import java.nio.ByteBuffer;
    import java.nio.CharBuffer;
    class Test {
        static char[] asciiToChar(byte[] b) {
            Charset cs = Charset.forName("ASCII");
            ByteBuffer bbuf = ByteBuffer.wrap(b);
            CharBuffer cbuf = cs.decode(bbuf);
            return cbuf.array();
        static byte[] charToAscii(char[] c) {
            Charset cs = Charset.forName("ASCII");
            CharBuffer cbuf = CharBuffer.wrap(c);
            ByteBuffer bbuf = cs.encode(cbuf);
            return bbuf.array();
    }version 2
    import java.io.*;
    import java.nio.charset.Charset;
    class Test {
        static char[] asciiToChar(byte[] b) throws IOException {
            Charset cs = Charset.forName("ASCII");
            ByteArrayInputStream bis = new ByteArrayInputStream(b);
            InputStreamReader isr = new InputStreamReader(bis, cs);
            char[] c = new char[b.length];
            isr.read(c, 0, c.length);
            return c;
        static byte[] charToAscii(char[] c) throws IOException {
            Charset cs = Charset.forName("ASCII");
            ByteArrayOutputStream bos = new ByteArrayOutputStream();
            OutputStreamWriter osw = new OutputStreamWriter(bos, cs);
            osw.write(c, 0, c.length);
            osw.flush();
            byte[] b = bos.toByteArray();
            return b;
    }

  • MAC Mini Performance and display quality help needed!

    I am new to the mac, having used pcs for what feels like hundreds of years.
    I am enjoying the experience, but my MAC mini is so slow. Its a 2014 i5 2.6 Ghz with 8GB of RAM.
    For example starting safari takes 20+ seconds from clicking the icon to being able to type a web address.
    Also the display is not brilliant the text is blurred. I am using a LG HD Monitor running at 1920 x 1080 and 60 Hz.
    I have a Dell PC with very similar specs connected to the same monitor and it does not suffer blurred display.
    Thanks for your help

    EtreCheck version: 2.2 (132)
    Report generated 5/4/15, 11:26 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Late 2014) (Technical Specifications)
        Mac mini - model: Macmini7,1
        1 2.6 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Not upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        Intel Iris
            IPS237 1920 x 1080
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:9:48
    Disk Information: ℹ️
        APPLE HDD HTS541010A9E662 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 998.98 GB (641.30 GB free)
                Core Storage: disk0s2 999.35 GB Online
    USB Information: ℹ️
        Apple, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Microsoft Microsoft® LifeCam Cinema(TM)
        Hercules Rocksmith USB Guitar Adapter
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Library/Application Support/VirtualBox
        [loaded]    org.virtualbox.kext.VBoxDrv (4.3.26) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.26) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.26) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxUSB (4.3.26) [Click for support]
            /Library/Extensions
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) [Click for support]
            /System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns
        [not loaded]    com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) [Click for support]
        [not loaded]    com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) [Click for support]
        [not loaded]    com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) [Click for support]
        [not loaded]    com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) [Click for support]
        [not loaded]    com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.mokafive.m5tray.plist [Click for support]
        [failed]    com.motorola.MDMUpdater.plist [Click for support] [Click for details]
        [running]    com.motorola.motohelper.plist [Click for support]
        [loaded]    com.motorola.motohelperUpdater.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
        [failed]    net.juniper.pulsetray.plist [Click for support] [Click for details]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.ea.origin.ESHelper.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.motorola-mobility.mmcfgd.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
        [loaded]    jp.co.canon.IJNetworkToolHelper.plist [Click for support]
        [failed]    net.juniper.AccessService.plist [Click for support]
        [not loaded]    net.juniper.UninstallPulse.plist [Click for support]
        [not loaded]    org.virtualbox.startup.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [failed]    com.lastpass.LastPassHelper.plist [Click for support] [Click for details]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
        [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Google Chrome    Application  (/Applications/Google Chrome.app)
        Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
        Skype    Application Hidden (/Applications/Skype.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        nplastpass: Version: 3.1.89 - SDK 10.10 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 40 Check version
    Safari Extensions: ℹ️
        Evernote Web Clipper
        PasswordBox
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        Java  [Click for support]
        MusicManager  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             4%    WindowServer
             1%    fontd
             1%    loginwindow
             1%    Google Chrome Helper(13)
             0%    taskgated
    Top Processes by Memory: ℹ️
        909 MB    Google Chrome Helper(13)
        674 MB    kernel_task
        467 MB    mdworker(12)
        401 MB    com.apple.WebKit.WebContent(5)
        180 MB    SophosScanD
    Virtual Memory Information: ℹ️
        1.24 GB    Free RAM
        6.76 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 4, 2015, 10:08:53 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Google Chrome_2015-05-04-100853_[redacted].crash
        May 2, 2015, 07:47:11 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-02-0747 11_[redacted].crash
        May 4, 2015, 11:13:54 AM    Self test - passed
        May 4, 2015, 10:02:56 AM    /Library/Logs/DiagnosticReports/Microsoft AutoUpdate_2015-05-04-100256_[redacted].cpu_resource.diag [Click for details]
        May 2, 2015, 09:13:07 AM    /Library/Logs/DiagnosticReports/Microsoft AutoUpdate_2015-05-02-091307_[redacted].cpu_resource.diag [Click for details]

  • Posting a Question and iPod mini help needed

    It's so frustrating to use this support site. I can't seem to find the right information.
    I need help. My iPod mini just suddenly conked out on me. Now it flashes the apple then an icon with a battery and an exclamation point inside a triangle. I tried to search for an answer in this site but all I got was a suggestion to reset it. I tried re-setting it and IT DIDN'T WORK!
    What do I do now? I really want to get this fixed as soon as possible. I happen to love my iPod. Please, please, someone help!

    Welcome to Apple Discussions, serangel.
    Here is the support site for using iPod mini.
    There are plenty of users there who will be happy to help.
    Cheers!

  • GROUP BY and ORDER BY help needed

    I have got an sql query where I have the need to pull out the latest copy of duplicate info, but what is happening is that the first instance is being displayed. The query I have is this:
    SELECT *
    FROM tbl_maincontenttext
    WHERE fld_menusection = 3
    GROUP BY fld_webpage
    ORDER BY fld_timedate DESC
    Basically, I have content that is listed under menu section 3, but within that I will have several copies of content that will relate to a specific webpage (eg: about us). What is currently happening is that GROUP BY is obviously grouping the similarly named 'about us', but it is pulling the first record it comes across out of the database rather than the latest updated record.
    As you can see, I am trying to get the query to order by fld_timedate which is a CURRENT_TIMESTAMP, but it's not working!
    I'm hoping that there is some sort of SQL that I am unaware of that will help me group by and display the latest update/content.
    Thanks.
    Mat

    It would help if you could show us the table definition. Your SQL statement is ambigous because you are selecting all table columns, yet only including one column in the group by clause.  A SQL statement must contain all selected columns that are not aggregates. Most DBMS will return an error for this statement. Others that don't return an error will return unexpected results.

  • Validation and Substitutions - Urgent Help needed

    Hello everyone,
    I need your help about this. This is the first time i am going to create a validation for document no. line items.
    The scenario is this:
    1. I need to check if the FI document that is to be posted contains line items where BSEG-LOKKT falls within the range of “0099990000-0099999999”. For each matching line item, I need to check if the credit line items balances with the debit line items. If TRUE then the validation will EXIT succesfully.
    2. If an FI document contains line items where BSEG-LOKKT falls within the range of “0099990000-0099999999”, but the sum of the debit line items and the credit line items is not equal to zero, validation will prevent thre user from posting the document. Error message will be raised.
    3. If FI document document does not contain line items with BSEG-LOKKT ranging from “0099990000-0099999999”, validation will exit successfully because there are no appropriate alternative accts to be verified.
    This validation will only apply to one company code.
    Please provide me with the step-by-step creation of the validation.
    Points will be rewarded for helpful answers.
    Thanks in advance.
    Bay

    look tcode ob28, validation exit and <a href="http://help.sap.com/saphelp_47x200/helpdata/en/5b/d231e143c611d182b30000e829fbfe/frameset.htm">here</a>
    A.

  • Middleware and Adapter Object help needed

    Hi all,
    We are trying to replicate business agreements from CRM to contract accounts in our R/3 IS-U system. We've followed the various cookbooks and guidelines but have so far been unsuccessful. For object BUAG_MAIN, is an adapter object needed? If so, we are unable to find one in R3AC1.
    If we check the BDoc message, we are getting two Technical errors after creating the business agreement:
    1. "Outbound call for BDoc type BUAG_MAIN to adapter module CRM_UPLOAD_TO_OLTP failed."
    2. "Service that caused the error: SMW3_OUTBOUNDADP_CALLADAPTERS"
    Any ideas? Points will be awarded for helpful responses. Thanks in advance.
    Message was edited by:
            John S

    So in R3AC1 there is a button to show inactive adapter objects. Hitting this showed BUAG_MAIN. After that, we opened BUAG_MAIN and activated the object. This resulted in a couple of changes that we clicked through. We then were able to do an initial load of the business agreements and replications of newly created ones happened thereafter.

  • Simple PHP and PLSQL Bind help needed

    HI,
    I am learning php and oracle I am trying to bind my plsql code with php but have little idea can anyone plese help?.
    my code is
    plsql prcoedure
    CREATE OR REPLACE PROCEDURE get_width (
    img_id IN arm_photos.id%TYPE
    AS
    image ORDSYS.ORDImage;
    width INTEGER;
    BEGIN
    SELECT p.image INTO image FROM arm_photos p
    WHERE p.id = img_id;
    -- Get the image width:
    width := image.getWidth();
    DBMS_OUTPUT.PUT_LINE('Width is ' || width);
    COMMIT;
    END;
    PHP code
    <?php
    $c =oci_connect('user', 'pass' , '//localhost/orcl');
    $s = oci_parse($c, " begin
    get_width(:id :width)");
    oci_bind_by_name($s, ':id', $id);
    oci_bind_by_name($s, ':width', $width);
    $id= 1235;
    oci_execute($s);
    ?>

    Variable width is a local variable. You can't get its value from outside SP. Either change your procedure to a function returning image width or add a second out parameter:
    CREATE OR REPLACE PROCEDURE get_width (
    img_id IN arm_photos.id%TYPE,width OUT INTEGER
    AS
    image ORDSYS.ORDImage;
    BEGIN
    SELECT p.image INTO image FROM arm_photos p
    WHERE p.id = img_id;
    -- Get the image width:
    width := image.getWidth();
    DBMS_OUTPUT.PUT_LINE('Width is ' || width);
    COMMIT;
    END;SY.

Maybe you are looking for