Zen Micro - Can it be used in the ca
Hello,
I have a Zen Micro and wondered if there is any way that it can be used through a conventional car cd player (as the Ipod can).
Any ideas ?
Cheers.
Many car stereos have a line in. If that is available then use that. If not, then you can get an fm transmitter that plugs into the player, and use your car radio to receive the signal. If there is a tape player, then you can use a cassette adapter to transfer the signal from the player to the car tape player. These are the same methods that would be used with an ipod.
Similar Messages
-
my Zen Micro used to work at its full potential. but when i was playing a song i accidentally pressed "Copy From Album" (something like that). then my Zen Micro froze and was not able to use it ever since. I can turn on my Zen Micro, but it just goes to the screen that says "CREATIVE." i tried the Recovery Mode, and still no luck! it keeps freezing and never wants to start up!
if anyone can help, it well be greatly appreciated
thnx!Similar problems were discussed here often. If recovery does not work, only help is to contact Creative customer service and act according to their reply. Usually they ask to send player back to them for replacement.
I had similar problem. After 3 days my player hanged and nothing helped. I was disappointed too, but since I was sent the new player, I feel much better Sending replacement took about week (from Ireland to Slovakia).
So the new one works well (already 3 weeks) and is fully loaded. Sometimes it gives me hard time when I'm switching it on and creative logo appears instead of splash screen, but it's never hanged. So slowly I relax. -
Zen micro can not be operate if it is connected to Travel Dock for Zen
I just bought Travel Dock for Zen Micro. I have 2 problems. Any body can help me please? 1. When I connect the Zen Micro to Travel dock. The Zen micro can not be operate both manual or using remote. But the charge sign in the Zen micro is appeared. So I am sure that the connection between Zen Micro and the travel dock is OK. No sound is produced. Any clue for it. 2. The I tried to connect the zen using line in cable. There is sound, but the sound is too weak, even if I set the maximum volume. Any clue for it? Any one has the same problem? How to overcome it? Thanks before for your helping and information
hey Jason thx for reply well it's weird like I said but whenever I downloaded the firmware ver. 2..0 or something the newest one it just said that the Player/USB was not hooked up to the computer when it actually was and it doesn't play any music it goes straight to restore mode. tell me if you need to know a little bit more thx
-
Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?
Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?
If you are speaking of the USB 3.0 Canvio, you are not alone. Call Toshiba and check on their progress in alleviating the problem. I heard they are blaming Apple, but since theirs is the only drive that exhibits this problem, I think the burden is on Toshiba.
Some users have reported that by using a micro USB 2.0 connector (see bottom picture), instead of the 3.0 that comes with the drive, that it is a workaround. Notice that the 3.0 connector has sort of a "dual head" nature to the construction. One part of it is 2.0 USB micro compatible. I've never tried it myself though.
Read ths thread for a discussion on the subject.
https://discussions.apple.com/thread/3510032?tstart=0 -
This phone can not be used because the apple mobile device service is not started
i plug my iphone into my computer and the message this phone can not be used because the apple mobile device service is not started pops up and wont let me download any music onto my phone. what can i do to make that stop happening?
See Here
http://support.apple.com/kb/TS1567 -
This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.
wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that didn't get installed with the itunes setup.
-
When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?
See Here... http://support.apple.com/kb/TS1567
-
I have a new iPod Touch 5th gen. My computer works on Windows 7. Latest ITunes gives me this message: "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." I have already removed and reinstalled a couple of times--making sure to remove all the related applications as well--Bonjour, Apple Software update, Apple Application Support. Help!
(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
What does "This ipod can not be used because the apple mobile device service is not started" mean. After I updated my Itunes I get this message when I plug in my Ipod and it doesn't come up in Itunes.
If you are using Windows 7, go to:
Control Panel>Programs>Programs and Features
Look for a program called 'Apple Mobile Device Support'
Right-click on it
Click 'repair'
Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me. -
with CC can i still use all the machines or do i have to take out an individual license for each?
Your LR5 license allows for activated installations on two machines. Of those two machine, only one can be using the licensed software at a given time. The same applies with CC, except with CC you won't be able to sneak in the third machine. What you can do though with CC is have it installed on all three and sign in and out of the different machines as needed.
If you intend to be using all three machines at the same time then you do need three separate licenses/subscriptions to be in compliance with the license agreement. -
How can I get (using API) the current sort column for some report
hello,
How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
I thought it was posssible by using
APEX_UTIL.GET_PREFERENCE (
p_preference IN VARCHAR2 DEFAULT NULL,
p_user IN VARCHAR2 DEFAULT V('USER'))
RETURN VARCHAR2;
function, but I don't really know which preference should I pass as parameter.
looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
Can I get (using API) a list of all preferences set for some user ?
Thank you,seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
is there anyplace where I can get these kind of things documented ?
Thank you. -
i am getting a message - the iphone can not be used because the apple mobile devise service is not started - what does this mean - what do i need to do?
See Here... http://support.apple.com/kb/TS1567
-
"This iPod can not be used because the required software is not installed"
I downgraded my ipod touch to 1.1.1, then back up to 1.1.2
now whenever i plug it in it says, "This iPod can not be used because the required software is not installed"
what should i do?????????????????????????????????????????????????Credit to razorianfly for this information...
Try This:
1. Turn iPod Touch OFF completely.
2. Plug iPod Touch into PC/MAC while still of.
3. Turn iPod touch on, then IMMEDIATELY do the following steps \/
4. Hold the 'Home button' and 'sleep/wake' button together for atleast 5 seconds.
5. The Apple logo will appear
6. When this happens release the 'sleep/wake' button BUT KEEP HOLD OF 'HOME' BUTTON
7. Your iPod will reboot (Apple logo)
6. iTunes will recognise iPod in 'Recovery mode'
8. You will be able to 'restore' your iPod Touch now.
Hope this resolves your problem. It should if done properly.
Good luck... -
This ipad can not be used because the required software is not installed
This Ipad can not be used because the required software is not installed. Run the itunes, then install the 64-bit version of itunes. Although the 64-bit version installed so. Help!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)
Maybe you are looking for
-
How do I transfer purchased music from one account to another?
I just recently got an iPad3 and made a new iTunes account on it. My mom and I have been sharing one iTunes account for a while on my computer, but now that we both have iPads we would like seperate accounts. I'm trying to take the purchased music of
-
@XmlRootElement is not getting creating while binding XSD
I am trying to bind XSD using XJC binding compiler (JAXB RI 2.0). While creating Java classes, it is not adding the annotation @XmlRootElement. Because of this I am facing errors "@XmlRootElement missing" while marshalling and unmarshalling the XML d
-
Can you trace which Indesign files link to a specifik image?
I have an image database, that multiple Indesign files link to. I am not the original author of the Indesign files nor the image database, so I have no overview of how many Indesign files links to each image. And now I have an image I would like to m
-
Ovi Suite 3.0.0.284 "Could not sign in" problem (N...
Hi, I have just installed Ovi suite 3.0.0.284 as suggested through software update and it works but I cannot sign into my account. I enter my details and I get an error as attached. The following things are ok: I can check for updates I can sync ever
-
Heavy/Lightweight User Ids and Applications
A common scenario is that an application, particularly a Java one, just connects to the Oracle database with one application user id. So the database does not know which human user is actually performing queries etc. This is to avoid having to define