ZEN Micro- Loose connection with USB port while charg

Hello everyone, I just bought my Zen Micro today. However, the USB port is quite loose, I am able to shake the USB connection to my player. Is this normal?

It's normal for the cable to be a bit loose when plugged in, yeah. I shouldn't worry about it unless the connection starts being faulty, which I don't think it will.
If any of the actual player itself looks wobbly, though, you probably ought to get a replacement.

Similar Messages

Is it safe to use the Belkin power strip with USB ports to charge my iPad? Or is the iPad USB adapter the safest route to take when traveling with device?

Is it safe to use the Belkin power strip with USB ports to charge my iPad?
Or is it better to travel with the Wall Charger provided with iPad?
Concerned about safety of the device. Thanks for your thoughts.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Itunes7 not responding with a mobile connected with usb port

Hello,
I try to listen music connecting a nokia n91 (hard disk 4gbyte) with the usb port and itunes7.
often itunes7 crashes (not responding status) and even I shut down the program, then it stops again, and again, and again..
Obviously with the previous version of itunes I had NO PROBLEMS!!
it seem that the version 7 has not been tested enough..
regards,
dave from italy

If it boots from the enlosure then I agree with Shootist in that it's more than likely that there's a problem with your SATA cable. Call or contact OWC and tell them the problem that you're having with their drive. They may just ship you a cable free.
Clinton

How to aquire data of Bluetooth device connected to USB port by using LABVIEW?

I am using LabVIEW2010 and want to acquire data of Bluetooth device which is connected to USB port while i am using OS xp3
THANKS

Does it have a driver to use it as a serial port?
Say hello to my little friend.
RFC 2323 FHE-Compliant

[Edit]Problem with Zen Micro when connected to PC-- cleared but another prob

Hello,
My problem is that my Computer (winxp, sp2) does not identify my zen micro any longer. few days ago it worked perfectly but now it doesnt work.
my zen micro has the firmware with the MTP/plays for sure
I had installed the things from the cd, when I bought it, that was in the package and then new drivers and the new applications, so two programs. (I had two Zen Micro symbols on my desktop but I could only use the program with MTP)
it worked fine.
a few weeks ago I had the same problem, but after a few connectings and disconnectings it worked again.
today this doesnt helped. I uninstalled everything what had to do with creative and then only installed new drivers and the newest applications (without the things from the cd).
it still doesnt work.
when I click on the "Zen Micro Media Explorer (MTP)" on the desktop I can see that my zen micro is connected. When I go to my playlists and click on one, it seems that my playlist is "empty". but in the mp3-player there is the playlist!
when I click on my music folder, where all the music is I see the folders, but when I go into the folders, the folders are also "empty".
what happened? I changed the usb ports--> doesnt work...
what can I do in order to use my zen micro again on the pc. my zen micro works fine(playlists and songs work normally), but I have problems having connected it to my pc... I cannot copy songs and edit my playlists anymore. is there any way to edit the playlists via mp3-player without connecting to the pc?
I hope you have a helping answer for me.
Regards
eX
by the way: new forums look good Message Edited by expredator on 02-07-2005 09:22 PMMessage Edited by expredator on 02-08-2005 0:57 PM

ok guys, I almost solved the problem. I used the rescue mode, used clean up, and now the folders are not empty and I can copy songs into my Zen Micro.
But the playlists are "empty". Also when I want to create a new playlist it says that my mp3-player is not connected ?! But it is! I can copy files into it!
I also cannot synchronize it with WMP0.
I reinstalled software and it didnt help...
So what can I do? It is connected but I cannot edit my playlists.
Is there any way to edit the playlists via the mp3-player and not over the pc?Message Edited by expredator on 02-08-2005 :00 PM

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

Print not response when i connect T1100 Epson to router RT-N16 ASUS with USB port???

For my macbook pro that I brought July 2010. I can print with T1100 Epson printer connect directly to my mac but when I connect T1100 to ASUS Router RT-N16 with USB port and I assign print to T1100 pass through wireless It's not response. How do we do please ???
Many Thanks for your answer...

Hello Shawnondrums,
Welcome to the HP Forums.
I see that you are having an issue with the printer shutting down when attempting to connect to the wireless network.
A very important step that gets easily over looked is, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is back on, please use the on/off button to do a proper shut down and restart. This will also do a semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

Zen micro not connect

after installing all the software on my computer (xp with all sservice packs),
the device shows up. but when you click on icon, it states that the zen is not connected?
installed it on different computer and it works fine,
can anybody PLEASE help me?
ps: does zen micro only work with usb2?
kai

the micro is backwardly compatable with USB aswell as working with USB 2.
often the front ports on a pc run on a built in hub, and the micro often has problems when connected through a hub, because it charges via usb port it requires a lot of power, the full 500mA offered by usb ports and through a non powered usb hub the micro often doesnt get enough power to function. so the usb ports at the back are usially the safest.
if the device is showing up in device manager, i suggest a full software instalation. encase something went wrong with it, also you could try updating the player firmware. what firmware do you currently have?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

What cable type for connecting with gigabit port

What kind of lan cable that I should use for connecting with gigabit port from Time Capsule to get the fastest transfer rate. And what is the maximum rate MB/sec that could be?

You can use CAT5 or CAT6.
max transfer rate is:
Fast Ethernet has a theoretical speed of 100 Mbits/sec (12 MB/sec), while Gigabit Ethernet has a theoretical speed of 1000 Mbits/sec (120 MB/sec). That suggests a double speed advantage of Gigabit Ethernet over USB (60 MB/sec), but neither protocol hits its maximum. In reality, a typical USB connected disk is roughly equal to or lesser than the throughput of a shared drive attached over a Gigabit Ethernet network.
Over wireless network:
- 802.11b has a theoretical speed maximum of 11 Mbits/sec with a typical transfer rate of around 4.5 Mbits/sec (0.5 MB/sec) with an ideal signal.
- 802.11g has a theoretical speed maximum of 54 Mbits/sec, with a typical transfer rate of around 23 Mbits/sec (2.5 MB/sec) with an ideal signal.
- 802.11n has a theoretical speed maximum of 300 Mbits/sec, with a typical transfer rate of around 74 Mbits/sec (9.25 MB/sec) with an ideal signal.

"Device connected to USB port has malfunctioned and is not recognized"

When I hooked my nano up to my computer today, the screen went black with a silver apple icon on it...it's still all lite up and on...but it won't change from that screen.
And my computer says, "Device connected to USB port has malfunctioned and is not recognized", so it won't show up in iTunes.
What do I do?? Thanks.
Windows

iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

HT202731 Unstable operation when 2 or more USB devices connected to usb port on a MacBook Pro running Yosemite

I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
I have tried erasing the hard drive and reinstalling the operating system.
I have done various types of reset suggested by apple support.
The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
I have operated the computer with only the software originally installed on it present.
Could it be possible that a virus could be present on the usb devices I am trying to connect?
My computer is a MacBook Pro (13-inch, Mid 2012)
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Startup Disk Macintosh HD
Graphics Intel HD Graphics 4000 1024 MB
Operating System X Yosemite 10.10.1
Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
7 port superspeed USB 3.0 hub (powered).
4 port Inateck USB 3.0 portable hub (not powered).
Buffalo ultra portable 500Gb USB 3.0 hard drive.
Seagate Expansion portable 500Gb USB 3.0 hard drive.
Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
ScanDisk Cruiser Edge 16Gb USB stick.
ScanDisk Cruiser Edge 32Gb USB stick.
Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)

Why?
- Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
- I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
- I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
- I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
Thanks.

Cannot connect to usb port

I was trying to connect from my MBA to mu Iphone 5, but the device is not recognize in the MBA, even that through iTunes, I can syncronize the data.
I'm also unable to create a network connection call USB device in Network Preferences.
Can anybody help?
Thanks,
Guillermo

Its really unbelievable what happened with USB ports. In my opinion you should contact Toshiba service and let them check ports functionality.
> I can't burn a third port on a third portege...
And if something like this happen Toshiba should repair it. It is not your fault.
I dont have iPhone but new iPad2 and I dont have any problem to connect it to my Satellite notebook.

TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock

ZEN Micro- Loose connection with USB port while charg

Similar Messages

Maybe you are looking for