ZONE configuration steps in solaris 10

Hi
Please help me to setup the zone configuration in solaris10
Thanks
Abi................................

Looks like they've updated the man page for new work before it is available.
This feature is not in any version of Solaris 10. I don't know when it is scheduled to appear. It is a portion of the project Crossbow and gives zones separate access to the IP layer (rather than only at the TCP layer).
It is present in at least nevada build 61, so you could play with this feature in any version of Solaris Express with that build or higher.
My guess is that this will be backported into Solaris 10, but someone on that project would likely need to talk about the timeline for that. You might ask on the project discussion board.
http://www.opensolaris.org/jive/forum.jspa?forumID=110
Darren

Similar Messages

CONFIGURE NFS ON SOLARIS ZONES

I want steps to configure NFS on solaris Zones

Hi,
I installed unfs3 in zone, but can't mount unfs3 share from solaris client(Solaris 10 10/08 s10s_u6wos_07b SPARC):
root@prod-db $ mount -F nfs -o rw 192.168.219.13:/software /mnt
nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error
nfs mount: retrying: /mnt
nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error....
Any suggestions? I cant find in internet any forum or mailing list about unfs3 :(

Steps to Configure Sendmail in Solaris 9

Can anyone provide me the SUN documents URL to configure sendmail in Solaris 9.
Any other good link will also do.
Thanks.

I have some questions:
The server in which I want to configure is running as a DNS client. and I want to configure a local mail so I think that i need to configure mail rather than configuring sendmail.
I get a document for configuring mail in solaris from docs.sun.com. The doc name is "Mail Administration Guide for Solaris 7".
This document has the steps to configure mail but my question is:
The server is already running as DNS client, in this case Do I have to install a new naming service to configure it as mail server?
Can we configure a server as NIS server when it is already a DNS client?
Suppose there is only one server, how do you configure mail server and client server and host server..can all three be done on only one server. Here there is one server and a few PCs need to be connected to it as clients.
Any suggestions?
David

Zone problem in Open Solaris

Hi Experts,
Below is the task I am doing to configure the zones in Open Solaris 2009.06:-
1 pfexec zfs create -o mountpoint=/zones rpool/zone
2 pfexec zonecfg -z myzone
3 myzone: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:myzone> create
zonecfg:myzone> set zonepath=/zones/myzone
zonecfg:myzone> add net
zonecfg:myzone:net> set physical=e1000g0
zonecfg:myzone:net> set address=10.0.2.25
zonecfg:myzone:net> end
zonecfg:myzone> exit
4 pfexec zoneadm -z myzone install
5 pfexec zlogin -C myzone
I am able to login to myzone with no problem.
When I run the command "**whoami**" it get the error - bash: woami: command not found.
If I run command ls -l It does not show me the filesystem.
Here is what I am trying to do:-
I am trying to install Sun Java system web server 6.1 SP11on myzone a Development Box. But I getting following error message on myzone.
Error:Unable to locate binary 'whoami'
Please make certain this binary is on your path and try again.
Same issue is with :-
Sun Identity Manager:
Java does not appear to be installed on this system. In order to run the Sun Download Manager you must install a Java(TM)2 JRE or JDK. Java is available from www.sun.com for no charge. While this application will work with any version of Java2, it is recommended that you use Java 1.4 or later.
mv: install.sfx.2408 and ./install.sfx.2408 are identical
11:30:52 AM
Sun (TM) Download Manager 2.0
Copyright (c) 2001-2006 by Sun Microsystems, Inc.
All rights reserved.
root@application1:/export/home/guru/idm/SUNwebinstall# Starting Java interpreter...
./sdm.sh[220]: java: not found [No such file or directory]
ERROR: Java interpreter reported a problem. Please, check the
ERROR: output log
Please suggest appropriate steps to be taken to resolve this issue.
Sunil.

I am only learning myself so I am no guru, but I have been doing simillar things..
You may have to make the filesystem available to the zone.
zonecfg -z myzone
zonecfg:myzone> add dataset
zonecfg:myzone:net> set name=rpool/zone
zonecfg:myzone:net> end
zonecfg:myzone:net> commit
zonecfg:myzone> exit
-- boot the zone
zoneadm -z myzone boot
login to your zone and list the filesystems
zfs list

Solaris10 branded zone creation error on Solaris 11.1

Hello,
We are having the problem in creating the Solaris10 branded zone on the solaris 11.1 version. We are trying to install this branded zone using the solaris10 VM template. Please can some one through some pointers ?
The installation steps stops at "Waiting for boot to complete" but never successfully boots even waiting for long times. We can see that Zone status in configured only.
root@localhost:~# /home/solaris-10u10-sparc.bin -p /solaris10 -i net0 -a xxx.xxx.xxx.xxx -z zone10
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
Checking disk-space for extraction
Ok
Extracting in /root/bootimage.dnaqaD ...
100% [===============================>]
Checking data integrity
Ok
Checking platform compatibility
The host and the image do not have the same Solaris release:
host Solaris release: 5.11
image Solaris release: 5.10
Will create a Solaris 10 branded zone.
IMAGE: /home/solaris-10u10-sparc.bin
ZONE: zone10
ZONEPATH: /solaris10/zone10
INTERFACE: net0
VNIC: vnicZBI6783
MAC ADDR: 2:8:20:5c:92:f5
IP ADDR: xxx.xxx.xxx.xxx
NETMASK: 255.0.0.0
DEFROUTER: # # This file is deprecated. Default routes will be created for any router # addresses specified here, but they will not change when the underlying # network configuration profile (NCP) changes. For NCP-specific static # routes, the '-p' option of the route(1M) command should be used. # # See netcfg(1M) for information about network configuration profiles. #
TIMEZONE: Asia/Kolkata
Checking disk-space for installation
Ok
Installing in /solaris10/zone10 ...
100% [===============================>]
Using a static exclusive-IP
./setupSysidcfgStaticIP[50]: file/sysidcfg.zone10: cannot create [No such file or directory]
cp: cannot access file/sysidcfg.zone10
chmod: WARNING: can't access file/sysidcfg.zone10
Attaching zone10
Booting zone10
zoneadm: zone 'zone10': must be installed before boot.
Waiting for boot to complete
booting...
booting...
booting...
root@localhost:# zoneadm list -cv
ID NAME STATUS PATH BRAND IP
0 global running / solaris shared
4 zone1 running /zone1 solaris excl
5 zone2 running /zone2 solaris excl
- zone10 configured /solaris10/zone10 solaris10 excl
root@localhost:#
I have installed the package pkg:/system/zones/brand/brand-solaris10 on the system.
# cat /etc/release
Oracle Solaris 11.1 SPARC
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Assembled 19 September 2012

Sorry, please ignore my previous message about the wrong ip address (I assume you entered a valid ip address).
The problem you are facing is related to the defaultrouter, and I assume you are running Solaris 11 update 1.
If so, to workaround the problem for the time being you may edit the /etc/defaultrouter file in the global-zone and enter the ip address of the default router (you can remove this change when the template deployment is completed).
If you have no idea about the default router ip address, just rename /etc/defaultrouter (e.g. to /etc/defaultrouter.orig) so that it cannot be found by the template. Again, you can undo the change when deployment is complete.
Thierry

Grid control 11g falling over on oms on OMS Configuration step

I've attempted to install grid control 11g on Solaris 10 (SPARC 64 bit), everything is fine until the installer gets to the OMS Configuration step, this bombs out with:-
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /u01/app/oracle/product/Middleware/oms11g/cfgtoollogs/omsca
Configuration assistant "OMS Configuration" Failed
Strangely no omcsa directory ever gets created, however in the /u01/app/oracle/product/Middleware/oms11g/cfgtoollogs/cfgfw directory, I gets lots of files with time stamps exactly the same as the time of the failure containing:-
Check the OMS Configuration Assistant logs at: /u01/app/oracle/product/Middlewa
re/oms11g/cfgtoollogs/omsca
INFO: oracle.sysman.top.oms:execve(): No such file or directory
INFO: oracle.sysman.top.oms:Error trying to exec /u01/app/oracle/product/Middlew
are/jdk160_14/bin/sparcv9/java.
INFO: oracle.sysman.top.oms:Check if file exists and permissions are set correct
ly.
INFO: oracle.sysman.top.oms:Failed to start a 64-bit JVM process from a 32-bit J
VM.
The JVM being used is the 32 bit one that comes with WebLogic server 10.3.2 for Solaris 32 bit, as there is no 64 bit version available. Can someone please advise as to how I get around this ?, do I need to download and install a 64 bit JVM after web logic has been installed ?, does this need to be a 64 bit JRockit JVM ?

Yes you can download the 1.6_18 JDK from the archive, however, if you extract is as the instructions recommend, these are the packages you get:-
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-javadoc
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-docs
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-demo
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-core
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-common
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-client
drwxrwxr-x 4 10 143 512 Dec 18 2009 SUNWjavadb-service
drwxr-xr-x 4 10 143 512 Dec 18 2009 SUNWj6rt
drwxr-xr-x 4 10 143 512 Dec 18 2009 SUNWj6man
drwxr-xr-x 4 10 143 512 Dec 18 2009 SUNWj6jmp
drwxr-xr-x 4 10 143 512 Dec 18 2009 SUNWj6dmo
drwxr-xr-x 4 10 143 512 Dec 18 2009 SUNWj6dev
drwxr-xr-x 4 10 143 512 Dec 18 2009 SUNWj6cfg
The 64 bit run time comes in SUNWj6rtx which is not present, this can be obtained with version 1.6_21 of the JDK, however by doing this, the installation is no longer that of a pure 1.6_18 JDK.

Configuration steps of transportation

sir,
Sir,
I have searched the configuration step of transportation in this forum, but i couldn,t able to under stand the steps.
Kindly give me the configuration steps of transportation and shipment cost settlement.
This will helps me alot
thank

Hi,
Transportation process as follows
Maintain transportation planning point through Menu as follows:
SPRO ->transportation->Enterprise Structure-> Definition->Logistic Execution ->Maintain planning point.
Create your own
Defining modes of transport:
SPRO->Routes -> Logistic Execution Define modes of Transportation ->Transportation Functions ->Define routes->transport
Use the standard like:
Shipping type: 01
Description: Road
Define shipping types : (SM30)
SPRO-> Define shipping types->Logistic Execution-> Transportation->Transportation Functions->Route
PT: 01
Description: Truck
Mdtr: 01
STPG: 0001
Define transportation connecting point :
BasicRoutes IMG DefineLogistic Execution Define transportation Transportation Transportation Functions routesconnection points
Copy the std point and make it FB01 as departure zone and FB02 as destination zone
Define routes and stages.
BasicRoutes  Define routes IMG Define Logistic Execution  Transportation routes and stagesTransportation Functions
Use the standard route and copy it as FB0001 and enter the departure zone and destination as what we created.
Defining Transportation Zone:
SPRO->Define transportation->Logistic Execution-> Transportation->Basic Transportation Functions zones-> Route->Router determination
Use the standard transportation zone depending on the route so as for the example use 0000000003 - Southern Region
Maintain country or transportation zone for shipping points
Route determination
SPRO->Logistic Execution ->Transportation Maintain country and-> Basic Transportation Functions->Route transportation zone for shipping point
Shipping point be ASH1 and route as 0000000003 which is assigned to country India
Maintain route determination:
Basic Route SPRO->Logistic Execution Maintain route-> Transportation->Transportation Functions->determination
Country of departure: India
Departure Zone: 0000000003
Country of destination: India
Destination Zone: 0000000003
And enter the datas needed like shipping condition 01, etc.
Maintain Transportation relevance for shipping point, sales document type and delivery types.
Now create shipping types
IMG Define Logistic Execution types Transportation  Shipments shipment
Copy the standard 0001 and make it to AFIL
10) Define and assign traffic zones through T-Code: T_76 (or) thru menu as follows
BasicIMG Define Logistic Execution and assign Transportation  Shipments cost functions tariff zones
Copy the standard and make it to FABTARIFF and assign our transportation planning point as ATP1, ATP2 assign tariff zone to every particular transportation planning point
11) Define and assign pricing procedures
IMG define and Logistic Execution  Transportation Shipments cost procedures Pricing  Price control assign pricing
Copy the standard shipping cost pricing procedure SDFC00 to FBSC01
12) Assign purchasing data:
IMG Assign purchasing data Logistic Execution  Transportation Shipments cost Settlement
13) Assign transportation planning point to shipping condition, purchase organization, purchasing group and to plants.
14) Define Automatic G/L account determination:
 IMG Automatic G/L Account Determination Logistics Execution Transportation Shipment CostsSettlement
Or through T-code: OMWB
Use G/L account 614000 as used in standard
15) Automatic determination of CO assignments:
Transportation Shipment Costs  Settlement IMG Automatic Logistics Execution Determination of CO Assignments
Or T-code: OKB9
16) Maintain shipping point address.
 Logistics Execution  Enterprise Structure Define, copy, delete, check shippingDefinition point
17) Creating G/L account centrally.
Financial  General Ledger  Master Records Accounting Accounting
Individual Processing Centrally
Or through T-Code: FS00
18) Enter the G/L account 614000 to the company code AFIL
19) Create transportation condition records:
Master data Transportation  Shipment cost  PricesLogistic Execution create
Or thru T-code: TK11
Enter condition type FB00 that is freight condition type, which is used as standard in the shipping cost pricing procedure.
Enter the price and save it
Process:
1. The system determines the pricing procedure for the shipment cost item-using transportation planning point, service agent and shipment cost item category
2. Calculation Basis
3. Condition Record
4. Access sequence.
For the sales order, create a delivery using VL01N and pick the goods. Now create a shipment using VT01N and assign the delivery to the shipment document. Make sure to enter the carrier and other details before performing the transportation planning and execution. Save the shipment document and PGI for the delivery would be done automatically.
A shipment represents a physical goods movement between two or more locations.
For the system to create a shipment, shipping-relevant deliveries must exist.
You use Transportation Planning to group pending deliveries into shipments and then to perform the shipments.
The outbound delivery documents contain routes that the system calculates in route determination, and a transportation planning date for the delivery.
Dynamic transportation planning is responsible for grouping together outbound deliveries into shipments that have at least the same route, visit plan type and the same transportation planning date.
The following restrictions can be taken into account for a shipment in Dynamic Transportation Planning:
Weight
Volume
Variable capacity
Number of stops
Maximum duration
Loading units
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Single document Create Transportation Planning Transportation Logistic Execution Logistics
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Create Shipment cost  Transportation Logistic Execution Logistics
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Single document Create  Transportation Planning  Transportation Logistic Execution Logistics
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Create Shipment cost  Transportation Logistic Execution Logistics
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Generally process is-
1) VL01N
2) VT01
3) VL02N - PGI
4) VI01
5) ML81N Service Entry Sheet
6) MIRO Invoice Verification
Shipping docs (VT01) are created before PGI...
You cannot carry out transportation planning or creation of shipment after the goods issue has been executed. Once goods issue is done it means that the material has left your premises so there is no need for a transportation planning after it.
In case you need carry out the shipment documents at the end of the day you could just create the delivery documents during the day and at end of the day create the shipment documents and the goods issue
Hope this is clear.
Reward if helpfu
Thanks
Praveen

Install and configuring SAMBA in Solaris 8.0

Hi
Can any one help tme to install and configure SAMBA on solaris 8.0
Thanks in advance

We don't provide sudo for Solaris 8, but you can try with the package available there : http://www.sudo.ws/sudo/download.html#binary
They don't provide a specific package for Solaris 8 but may be will the binary working correctly in your zone.
An other package, and is builded for Solaris 8, is available on www.sunfreeware.com website.
Regarding the configuration, the method can differ depending on which version you will use. You can find a lot of examples on Internet if you want for details.

Configuring IPSec in Solaris 9

Hello Friends,
I want to configure IPSec in solaris 9 so that a win2k/XP machine can communicate with that solaris m/c using IPSec. Could anybody help me regarding this. I have a basic idea of IPSec. I just want a step by step instructions for how to configure it. I have searched through google and found many docs which instructs how to configure IPSec between solaris only and also between windows only and I have succeeded to do so. But failed to configure it within solaris and windows.
Thanks and Regards
Dipta P Banerjee

yes, you can use oracle thin driver.
Your connection pool configuration is actually using datasource of oracle thin driver.
1) download oracle thin driver from oracle
2) .jar need to be kept in AS_INSTALL/domains/<domain-name>/lib/ext
3) restart AS
4) set all the necessary properties for Oracle thin driver - conn. pool (refer App Server Administration Guide > JDBC Resources > Config. for specific JDBC Drivers > Oracle thin type 4 driver
5) Ping conn. pool
If you are still getting the failure message, please post
1) exception got during ping, from domains/<domain-name>/logs/server.log
2) connection pool configuration
Thanks,
-Jagadish

Need complete Configuration steps for creating Shipment & Shipment costs.

Hi,
Can anybody explain the Configuration steps in IMG required to create Shipment (T Code - VT01) & Shipment costs (VI01).
Thanks in advance.
Manjunath.

hi
Route can be determined in sales order with the help of 5 parameters: depart country, shipping conditions in customer master record, transportation group in material master, destination country, and weight group.
Weight group plays a vital role. The purpose of route determination is like in scenario's where company will ship goods to the customer in various ways not only that it has optional of having n number of routes select the best one & based on his customer priority (time & money.) for sending samples company will go for air, for delivering ordered goods it can go for different mode of transportation & routes.
Route Determination: Departure country zonedestination country zoneshipping condition+ transportation Group+Weight Group ( Optional)= Route.(0VRF)
Plant determination in the sales order: System will search first for Customer material Info Record, if it is not maintained there it will check for customer master record, if it is not maintained here also system will search for material master record..
Configuration part:
SPRO > Routes Basic shipping functions  Shipping -LE -
Define Routes:
Define mode of transportation
Define shipping types.
Assign shipping types to mode of transportation.
Define Routes and Stages
Maintain Stages For All Routes
Route Determination:
Define Transportation Zones
Maintain Country And Transportation Zone For Shipping Point
Define Transportation Groups
Define Weight Groups
Maintain Route Determination in the combination of
a) Departure country/Departure Zone - maintained in shipping point configuration
b) Shipping condition from the sales order
c) Transportation planning group maintained in General/Plant view of material master.
d) Destination country/Transportation zone maintained in General view -Address of Customer master of Ship to Party.
SHIPMENT COST:
Shipment cost in shipping contains create the shipment cost doc., process the shipment, monitor the shipment, calculate the shipment and settle the shipment.
Shipment cost doc. contains calculate the shipment, assign to accounting, transfer to FI and settle the shipment cost.
Shipment cost doc. divided into header, item and sub item data.
We need to assign transportation planning point to com. code to calculate and settle the shipment cost.
1. Define date rules:- In this IMG activity you define the date rules that determine which dates are chosen for determining the pricing date and the settlement date and the sequence in which they are accessed. The dates can be, for example, the end of transportation planning or the start of lading.
2. Define and assign tariff zones:-In this IMG activity, you define the tariff zones and assign postal code areas to the tariff zones for each organizational key. The tariff zones are represent geographical influencing factors during the calculation of shipment costs.
3. Define no. ranges for shipment cost:-In this IMG activity you define the number interval for the shipment cost documents. When creating a shipment cost document, a unique number is generated. The number comes from the number range that you create in this menu point as the internal number range.
You can also create an external number range. The option to specify a number from the external number range when creating the shipment cost document is, however, not currently supported.
4. Shipcost types and item cat.:-In this IMG activity, you define the shipment cost types and item categories that contain all important control features for the shipment cost document, such as:
Number range
Status requirements for the shipment documents
Parameters for shipment costing
Parameters for shipment settlement
5.shipcost relevance and default for shipcost types:-In this IMG activity you assign the shipment cost types to the shipment types and set an indicator to show whether the cost type is relevant to shipment costing. You do this for every cost type in every shipment type. .
Example
For the 'individual shipment' shipment type, you set the indicator for the cost types shipment header and leg, but not for the cost types border crossing or load transfer point. You also assign a shipment cost type to the shipment type. When you create a shipment cost document, this shipment cost type is determined automatically.
6. Settlement:-
Certain control elements must be maintained for calculating shipment costs with the transportation service agent and for forwarding of shipment costs to FI and CO.
you can maintain these control elements and carry out the corresponding assignments.
-- Assign purchasing data
--maintain acc. assignment cat.
--automatic G/L acc. determination
--automatic determination of CO assignments
--invoices and credit memos
The process of calculating the shipment costs for a shipment.
Shipment costs:
The total costs involved in the shipment of a product. Not just pure freight costs, but also cleaning costs, insurance, and other costs as well
check this link
http://help.sap.com/saphelp_46c/helpdata/en/4f/fceb47b535d1118b3f0060b03ca329/frameset.htm
and
http://help.sap.com/saphelp_470/helpdata/en/d5/2285347860ea35e10000009b38f83b/frameset.htm

Trusted Network Zone Configuration Tool is not there!

I've installed Solaris 10 x86 11/06 and Trusted Extensions, and when I open SMC and try to navigate to the "Trusted Network Zone Configuration Tool" that is supposed to be in the "Computers And Networks" section, it's just not there. Trusted Extensions are installed, I get the special Trusted dialogs during login, but this tool is missing. I've verified that all related packages were installed with Trusted Extensions. This is a stand alone machine (for development). Does anyone have suggestions as to why this tool is missing and how to get it working?

Found the problem, I feel stupid, I was opening the non-TSOL toolbox in SMC.

Some package installation error during zone installation steps.....

hi,
i am totally new to this technology.
i had created 3 Zone's on X86 Sun Fire X4270 M2 Hardware (OS - Solaris 10 update 9)
& during OS Installation i had selected Software installations using the Entire Distribution.
every thing worked fine but during zone installation steps, got some package installation error (refer the below output)
bash-3.00# zoneadm -z OFSMU-PWM-zone1 install
Preparing to install zone <OFSMU-PWM-zone1>.
Creating list of files to copy from the global zone.
Copying <158400> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1240> packages on the zone.
Initialized <1240> packages on zone.
Zone <OFSMU-PWM-zone1> is initialized.
Installation of these packages generated errors: <SUNWpostgr-82-libs SUNWpostgr-82-devel SUNWpostgr-83-server-data-root SUNWpostgr-82-server SUNWpostgr-82-contrib SUNWpostgr-82-client SUNWpostgr-82-server-data-root>
The file </zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
i checked the log file "/zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log"
its show below error's
*** package <SUNWpostgr-82-libs> failed to install with fatal errors:
*** package <SUNWpostgr-82-devel> failed to install with fatal errors:
need your help my friends..
thanks in advance....
Edited by: Raja Kondar on Dec 9, 2010 11:59 AM

hi DR,
thnks for reply..
but i can see that "postgres" already exist in the system as user &l group.
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh
also the failed packages duirng zone creation steps are already installed in the global zone..
is thr any other way to resolve this issue....
Edited by: Raja Kondar on Dec 16, 2010 11:00 AM

Transportation Configuration Steps required:

Hi Guru's
I am new to this module, could you please show the configuration steps for the SD- Tranporrtation module please.
sushil

Hi Sushil,
TMS Total steps:
3.     Terminology:
Mentioned below are some important terms used in Transportation:
SAP Terminology:                Description
1. Forwarding Agent:                Agent who provides the transportation
2. Transportation Planning Point :      Org. unit responsible for planning shipments with particular features. E.g.: A company has different groups of shipping personnel responsible for organizing shipments by train or ship
3. Shipment Document:     The document containing the details of the deliveries, service agents
, routes, stages, planning and execution times.
4. Shipment Type:     Shipment types contain all the essential control features for the shipment document such as number ranges, service level, and output and partner determination.
5. Routes:     The route determines the itinerary and the means of transport in shipping, and influences transportation scheduling.
6. Shipment Cost Document     The shipment cost document is the used for shipment cost processing. It contains the details related to accounting and the cost calculations.
7.Shipment cost type and item categories     Shipment cost types and item categories contain all the important control features for the shipment cost document, such as number range, status requirements for the shipment documents, and parameters for shipment costing, parameters for shipment settlement.
8. Master Data:
Purchase Order is created for Vendor if the weekly or monthly orders are not created during the transaction by the system.
Relevant pricing conditions are maintained.
9. Customization:
1. Transportation Relevance is marked for Delivery type, Delivery Item Type,   Route.
2. Route Determination is active.
3. Route is determined in the delivery document.
4. Shipment types are created as desired.
5. Shipment pricing procedure is in place.
6. Shipment cost types are created and assigned to shipment types.
7. Purchasing Data is assigned.
8. G/L Account assignments are done.
10. 1.Maintain Transportation Planning Point
The transportation planning point represents a group of employees responsible for organizing transportation activities. Each shipment is assigned to a specific transportation planning point for transportation planning and shipment completion
The transportation planning point is assigned at Co-Code level.
Menu Path: Enterprise Settings > Definition > Logistics Execution > Maintain transportation planning point
10.2.Define Routes
The route determines the itinerary and the means of transport in shipping, and influences transportation scheduling. The description of routes, service agent, distance and lead times are defined in routes.
Menu Path: Logistics Execution > Transport > Basic Transportation Functions > Routes > Define Routes > Define Routes And Stages
10.3.Maintain Route Determination:
Routes are determined depending on the following criteria:
1.     Country and departure zone (departure zone of the shipping point)
2.     Shipping conditions agreed in the sales order.
The shipping condition is defined in shipping point determination.
3.     Transportation group of the material
4.     Country and transportation zone (receiving zone) of the ship-to party
Menu Path: Logistics Execution > Transport > Basic Transportation Functions > Routes > Define Routes > Route Determination > Maintain Route Determination
10.4Maintain Transportation Relevance
Delivery types and delivery item categories for which transportation processing is to be carried out must be characterized as relevant for transportation.
All routes that are to be used for the shipment must also be set as relevant for transportation.
Menu Path: Logistics Execution > Transport > Shipments > Maintain Transportation Relevance
10.5.Define Shipment Types:
The shipment types represent the different forms of transportation processing in sales and distribution.
The following forms of transportation processing are distinguished:
1) Individual shipment, one or more deliveries are transported by a single mode of transport from one point of departure to one final destination.
2) Collective shipment, one or more deliveries are transported by a single mode of transport from one or more points of departure to one or more final destinations.
3) Multimodal shipment, deliveries are transported by several modes of transport between one or more points of departure and one or more final destinations.
Menu Path: Logistics Execution > Transport > Shipments > Define Shipment Types
10.6.Define Shipment Cost types
10.7.Pricing
Logistics Execution > Transport > Shipment Costs > Pricing > Pricing Control > Define And Assign Pricing Procedures
10.8 Settlement

OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
Nitin

Hi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram

Product costing by sales order configuration steps

hi
plz send me product costing by sales order configuration steps.
sir, i know manufacturing order configuration step but i do not sales order configuration.
in the sales order also is same as manufacturing order like first we have to make planning cost , the planning cost should be updated to material master and next configure the actual cost.
for first step- costing variant -okkn
next -costing variant -opl1
for sales order also same we need to update planning price first- what is costing variant
for actual cost - what is costing variant
plz tell me detail
regards,
sowmya
Moderator: Please, read forum rules before posting

Hi Sashikanth,
Please send me the Configuration document for make to sales order.We are at Blue print stage need some docment for make to sales order.Plese send me the document it will will be very help full for me.
My id is [email protected]
Thanks in advance
Regards,
Nagaraju
Edited by: nagaraju sami on Mar 9, 2008 11:58 AM

ZONE configuration steps in solaris 10

Similar Messages

Maybe you are looking for