Zsnes 1.42 fails to detect opengl libs
Hi there,
I'm new to archlinux (although not new to linux in general) and really like it so far. However I'm having some problems with compiling zsnes 1.42. For some reason zsnes fails to detect opengl.
I'm running libgl 7.0.3rc1-1 and mesa 7.0.3rc1-1 and use the intel video driver in X.
However the configure script from zsnes outputs:
checking for glGetError in -lGL... no
checking for OpenGL... no
my config.log
I'm using 1.42 and not the version available in pacman, because newer zsnes versions lack support for netplay.
Hi there,
I'm new to archlinux (although not new to linux in general) and really like it so far. However I'm having some problems with compiling zsnes 1.42. For some reason zsnes fails to detect opengl.
I'm running libgl 7.0.3rc1-1 and mesa 7.0.3rc1-1 and use the intel video driver in X.
However the configure script from zsnes outputs:
checking for glGetError in -lGL... no
checking for OpenGL... no
my config.log
I'm using 1.42 and not the version available in pacman, because newer zsnes versions lack support for netplay.
Similar Messages
-
I've set up mpd according to the wiki.
/etc/mpd.conf:
music_directory "/var/lib/mpd/music"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/run/mpd/mpd.pid
state_file "/var/lib/mpd/mpdstate"
user "mpd"
audio_output {
type "pulse"
name "My Pulse Output"
# server "remote_server" # optional
# sink "remote_server_sink" # optional
/var/lib/mpd/music is a symlink to /home/dennis/Musik/mpd/. I've given the mpd user recursive ownership to both /var/lib/mpd/ and /home/dennis/Musik/mpd/.
When I try to update the database (I've tried both mpc and Sonata), the log says
Failed to stat /var/lib/mpd/music: Permission denied
What permission am I missing?
SOLUTION:
I used the script config instead and it worked flawlessly.
Last edited by snufkin (2013-01-03 00:18:44)I returned this:
ene 17 21:00:55 ddich systemd[1]: Starting Music Player Daemon...
ene 17 21:00:55 ddich systemd[1]: Started Music Player Daemon.
ene 17 21:00:55 ddich mpd[14061]: output: No 'audio_output' defined in config file
ene 17 21:00:55 ddich mpd[14061]: output: Attempt to detect audio output device
ene 17 21:00:55 ddich mpd[14061]: output: Attempting to detect a alsa audio device
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_card_dri...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_concat r...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer re...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file ...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default
ene 17 21:00:55 ddich systemd[1]: mpd.service: main process exited, code=killed, status=6/ABRT
ene 17 21:00:55 ddich systemd[1]: Unit mpd.service entered failed state. -
SDDM + nvidia-340xx = black screen - Failed to create OpenGL context
When I'm trying to use SDDM I see nothing but black screen (I see sddm and Xorg running).
It used to work some time ago, but one day it stopped.
I'm using nvidia-340xx drivers:
[travnick@travnick-lap ~]$ yaourt -Qs nvidia
community/cuda 7.0.28-2
NVIDIA's GPU programming toolkit
multilib/lib32-libvdpau 1.1-1
Nvidia VDPAU library
multilib/lib32-nvidia-340xx-libgl 340.76-1
NVIDIA drivers libraries symlinks (32-bit)
multilib/lib32-nvidia-340xx-utils 340.76-1
NVIDIA drivers utilities (32-bit)
extra/libcl 1.1-4
OpenCL library and ICD loader from NVIDIA
extra/libvdpau 1.1-1
Nvidia VDPAU library
extra/nvidia-340xx 340.76-9
NVIDIA drivers for linux, 340xx legacy branch
extra/nvidia-340xx-libgl 340.76-2
NVIDIA drivers libraries symlinks
extra/nvidia-340xx-utils 340.76-2
NVIDIA drivers utilities
extra/opencl-nvidia-340xx 340.76-2
OpenCL implemention for NVIDIA
journalctl says:
[travnick@travnick-lap ~]$ sudo journalctl -b |grep sddm
[sudo] hasło użytkownika travnick:
maj 22 16:29:14 travnick-lap sddm[1090]: Signal received: SIGUSR1
maj 22 16:29:15 travnick-lap sddm-helper[1126]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
maj 22 16:29:15 travnick-lap systemd-logind[1084]: New session c1 of user sddm.
maj 22 16:29:15 travnick-lap systemd[1]: Started Session c1 of user sddm.
maj 22 16:29:15 travnick-lap systemd[1]: Starting Session c1 of user sddm.
maj 22 16:29:15 travnick-lap systemd[1128]: pam_unix(systemd-user:session): session opened for user sddm by (uid=0)
maj 22 16:29:15 travnick-lap systemd[1128]: systemd 219 running in user mode for user 999/sddm. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
maj 22 16:29:15 travnick-lap systemd[1128]: /var/lib/sddm/.config/systemd/user
maj 22 16:29:15 travnick-lap systemd[1128]: /var/lib/sddm/.local/share/systemd/user
maj 22 16:29:20 travnick-lap sddm-greeter[1132]: Failed to create OpenGL context for format QSurfaceFormat(version 2.0, options QFlags(), depthBufferSize 24, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize 8, samples -1, swapBehavior 2, swapInterval 1, profile 0)
maj 22 16:29:21 travnick-lap systemd-coredump[1140]: Process 1132 (sddm-greeter) of user 999 dumped core.
maj 22 16:30:33 travnick-lap polkitd[1102]: Operator of unix-process:4785:11656 FAILED to authenticate to gain authorization for action org.freedesktop.systemd1.manage-units for system-bus-name::1.10 [systemctl restart sddm] (owned by unix-user:travnick)
maj 22 16:30:45 travnick-lap sudo[4792]: travnick : TTY=tty2 ; PWD=/home/travnick ; USER=root ; COMMAND=/usr/bin/systemctl restart sddm
maj 22 16:30:45 travnick-lap sddm[1090]: Signal received: SIGTERM
maj 22 16:30:47 travnick-lap sddm[4800]: Signal received: SIGUSR1
maj 22 16:30:47 travnick-lap sddm-helper[4807]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
maj 22 16:30:47 travnick-lap systemd[1]: Started Session c3 of user sddm.
maj 22 16:30:47 travnick-lap systemd-logind[1084]: New session c3 of user sddm.
maj 22 16:30:47 travnick-lap systemd[1]: Starting Session c3 of user sddm.
maj 22 16:30:48 travnick-lap sddm-greeter[4809]: Failed to create OpenGL context for format QSurfaceFormat(version 2.0, options QFlags(), depthBufferSize 24, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize 8, samples -1, swapBehavior 2, swapInterval 1, profile 0)
maj 22 16:30:48 travnick-lap systemd-coredump[4817]: Process 4809 (sddm-greeter) of user 999 dumped core.
maj 22 16:31:07 travnick-lap sudo[4819]: travnick : TTY=tty2 ; PWD=/home/travnick ; USER=root ; COMMAND=/usr/bin/systemctl stop sddm
maj 22 16:31:07 travnick-lap sddm[4800]: Signal received: SIGTERM
maj 22 16:31:21 travnick-lap sudo[4832]: travnick : TTY=tty2 ; PWD=/home/travnick ; USER=root ; COMMAND=/usr/bin/systemctl disable sddm
Last edited by travnick (2015-06-02 23:25:58)It's working for me, I'm on 340xx nvidia drivers and using sddm+plasma. I even have nouveau installed in parallel (blacklisted).
I don't know if it makes any difference, but I'm using the -ck variant of the kernel and the nvidia driver. libgl part is still the same though:
$ pacman -Qs nvidia
local/lib32-libcl 1.1-1
OpenCL library and ICD loader from NVIDIA (32-bit)
local/lib32-nvidia-340xx-libgl 340.76-1
NVIDIA drivers libraries symlinks (32-bit)
local/lib32-nvidia-340xx-utils 340.76-1
NVIDIA drivers utilities (32-bit)
local/libcl 1.1-4
OpenCL library and ICD loader from NVIDIA
local/libvdpau 1.1-1
Nvidia VDPAU library
local/nvidia-340xx-ck-k10 340.76-11 (ck-k10)
NVIDIA drivers for linux-ck, 340xx legacy branch.
local/nvidia-340xx-libgl 340.76-2
NVIDIA drivers libraries symlinks
local/nvidia-340xx-utils 340.76-2
NVIDIA drivers utilities
local/opencl-nvidia-340xx 340.76-2
OpenCL implemention for NVIDIA
local/xf86-video-nouveau 1.0.11-3 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards -
[SOLVED] mkarchiso: ERROR: failed to detect root filesystem
hi guys!
i am now trying to build my own live archlinux distribution with archiso and with the command "mkarchiso"
at the first step in installing the base when it installs linux and execute "mkinitcpio" it shows me this error:
( 73/111) installing linux [#####################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
i continue the process with that error and in the "run" step i did this command
# mkarchiso -w work/x86_64/ -r mkinitcpio -p linux run
[root@fuhrer livecd]# mkarchiso -w work/x86_64/ -r mkinitcpio -p linux run
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: run
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work/x86_64/
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Run command: mkinitcpio
==> Starting dry run: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Dry run complete, use -g IMAGE to generate a real image
and the big problem shows when i build the iso file and "dd" it to USB disk, when i choose to boot the live archlinux it tell me
ERROR: failed to detect root filesystem
and that you cannot log to tty
any suggestions?
Last edited by fuhrer (2013-07-22 17:05:07)First run it, without any modification to learn how it works. Check if works. Modify as you need. Check if works...
Do not worry about the mkinitcpio error, because such initramfs images should not be used for boot live medium. You can see that profiles uses own mkinitcpio.conf with at least archiso hook
Running mkarchiso directly is not the right way, at least if you do not know how things works.
[root@exequiel tmp]# cp -r /usr/share/archiso/configs/baseline .
[root@exequiel tmp]# cd baseline
[root@exequiel baseline]# ./build.sh
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: init
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: /etc/pacman.conf
[mkarchiso] INFO: Installing packages to 'work/root-image/'...
:: Synchronizing package databases...
core 103.0 KiB 12.6M/s 00:00 [############################################################################] 100%
extra 1439.7 KiB 11.2M/s 00:00 [############################################################################] 100%
community 1990.1 KiB 11.2M/s 00:00 [############################################################################] 100%
multilib 107.3 KiB 11.6M/s 00:00 [############################################################################] 100%
:: There are 51 members in group base:
:: Repository core
1) bash 2) bzip2 3) coreutils 4) cronie 5) cryptsetup 6) device-mapper 7) dhcpcd 8) diffutils 9) e2fsprogs 10) file 11) filesystem 12) findutils 13) gawk 14) gcc-libs 15) gettext 16) glibc
17) grep 18) gzip 19) heirloom-mailx 20) inetutils 21) iproute2 22) iputils 23) jfsutils 24) less 25) licenses 26) linux 27) logrotate 28) lvm2 29) man-db 30) man-pages 31) mdadm 32) nano
33) netctl 34) pacman 35) pciutils 36) pcmciautils 37) perl 38) procps-ng 39) psmisc 40) reiserfsprogs 41) sed 42) shadow 43) sysfsutils 44) systemd-sysvcompat 45) tar 46) texinfo 47) usbutils
48) util-linux 49) vi 50) which 51) xfsprogs
Enter a selection (default=all):
resolving dependencies...
looking for inter-conflicts...
Packages (111):
Name New Version Net Change
core/acl 2.2.52-1 0.39 MiB
core/archlinux-keyring 20130525-2 0.49 MiB
core/attr 2.4.47-1 0.19 MiB
core/ca-certificates 20130610-1 0.25 MiB
core/cracklib 2.8.22-3 1.20 MiB
core/curl 7.31.0-1 1.73 MiB
core/db 5.3.21-1 15.30 MiB
core/dbus 1.6.12-1 1.63 MiB
core/dirmngr 1.1.1-1 0.49 MiB
core/expat 2.1.0-2 0.61 MiB
core/gdbm 1.10-1 0.37 MiB
core/glib2 2.36.3-2 11.66 MiB
core/gmp 5.1.2-1 2.07 MiB
core/gnupg 2.0.20-2 7.14 MiB
core/gpgme 1.4.2-1 0.68 MiB
core/groff 1.22.2-3 8.94 MiB
core/hwids 20130607-1 1.28 MiB
core/iana-etc 2.30-3 3.44 MiB
core/iptables 1.4.19.1-1 1.38 MiB
core/kbd 1.15.5-4 2.83 MiB
core/keyutils 1.5.5-5 0.18 MiB
core/kmod 14-1 0.45 MiB
core/krb5 1.11.3-1 3.86 MiB
core/libarchive 3.1.2-1 3.19 MiB
core/libassuan 2.1.1-1 0.17 MiB
core/libcap 2.22-5 0.13 MiB
core/libffi 3.0.13-3 0.10 MiB
core/libgcrypt 1.5.2-1 0.68 MiB
core/libgpg-error 1.12-1 0.33 MiB
core/libgssglue 0.4-1 0.19 MiB
core/libksba 1.3.0-1 0.30 MiB
core/libldap 2.4.35-4 2.15 MiB
core/libpipeline 1.2.4-1 0.08 MiB
core/libsasl 2.1.26-4 0.54 MiB
core/libssh2 1.4.3-1 1.19 MiB
core/libtirpc 0.2.3-1 0.68 MiB
core/libusbx 1.0.15-1 0.15 MiB
core/linux-api-headers 3.8.4-1 4.58 MiB
core/linux-firmware 20130610-1 51.25 MiB
core/lzo2 2.06-1 0.61 MiB
core/mkinitcpio 0.14.0-1 0.16 MiB
core/mkinitcpio-busybox 1.20.2-1 0.34 MiB
core/mpfr 3.1.2-1 1.50 MiB
core/ncurses 5.9-5 9.75 MiB
core/openresolv 3.5.5-1 0.04 MiB
core/openssl 1.0.1.e-3 11.38 MiB
core/pacman-mirrorlist 20130626-1 0.02 MiB
core/pam 1.1.6-4 3.41 MiB
core/pambase 20130113-1 0.04 MiB
core/pcre 8.33-1 4.83 MiB
core/pinentry 0.8.3-1 0.33 MiB
core/popt 1.16-6 0.43 MiB
core/pth 2.0.7-4 0.21 MiB
core/readline 6.2.004-1 1.20 MiB
core/run-parts 4.3.4-1 0.11 MiB
core/systemd 204-3 14.59 MiB
core/sysvinit-tools 2.88-11 0.07 MiB
core/tzdata 2013d-1 1.84 MiB
core/xz 5.0.5-1 0.90 MiB
core/zlib 1.2.8-1 0.30 MiB
core/bash 4.2.045-4 3.51 MiB
core/bzip2 1.0.6-4 0.25 MiB
core/coreutils 8.21-2 13.27 MiB
core/cronie 1.4.9-5 0.15 MiB
core/cryptsetup 1.6.1-2 0.71 MiB
core/device-mapper 2.02.98-4 0.52 MiB
core/dhcpcd 5.6.8-3 0.16 MiB
core/diffutils 3.3-1 0.43 MiB
core/e2fsprogs 1.42.8-1 3.16 MiB
core/file 5.14-1 2.71 MiB
core/filesystem 2013.05-2 0.01 MiB
core/findutils 4.4.2-5 1.70 MiB
core/gawk 4.1.0-1 2.11 MiB
core/gcc-libs 4.8.1-1 3.41 MiB
core/gettext 0.18.3-1 11.10 MiB
core/glibc 2.17-6 35.24 MiB
core/grep 2.14-2 1.33 MiB
core/gzip 1.6-1 0.18 MiB
core/heirloom-mailx 12.5-3 0.46 MiB
core/inetutils 1.9.1-6 0.97 MiB
core/iproute2 3.9.0-2 1.37 MiB
core/iputils 20121221-2 0.21 MiB
core/jfsutils 1.1.15-4 0.98 MiB
core/less 458-1 0.22 MiB
core/licenses 20130203-1 0.53 MiB
core/linux 3.9.9-1 63.98 MiB
core/logrotate 3.8.5-1 0.07 MiB
core/lvm2 2.02.98-4 3.10 MiB
core/man-db 2.6.5-1 1.26 MiB
core/man-pages 3.52-1 4.63 MiB
core/mdadm 3.2.6-4 1.18 MiB
core/nano 2.2.6-2 1.49 MiB
core/netctl 1.1-1 0.16 MiB
core/pacman 4.1.2-1 4.04 MiB
core/pciutils 3.2.0-3 0.34 MiB
core/pcmciautils 018-7 0.05 MiB
core/perl 5.18.0-1 47.64 MiB
core/procps-ng 3.3.8-2 0.59 MiB
core/psmisc 22.20-1 0.73 MiB
core/reiserfsprogs 3.6.23-1 0.95 MiB
core/sed 4.2.2-3 0.76 MiB
core/shadow 4.1.5.1-6 3.88 MiB
core/sysfsutils 2.1.0-8 0.17 MiB
core/systemd-sysvcompat 204-3 0.03 MiB
core/tar 1.26-4 2.33 MiB
core/texinfo 5.1-1 8.62 MiB
core/usbutils 007-1 0.17 MiB
core/util-linux 2.23.1-2 8.92 MiB
core/vi 1:050325-3 0.33 MiB
core/which 2.20-6 0.06 MiB
core/xfsprogs 3.1.11-1 3.29 MiB
Total Installed Size: 427.79 MiB
:: Proceed with installation? [Y/n]
(111/111) checking keys in keyring [############################################################################] 100%
(111/111) checking package integrity [############################################################################] 100%
(111/111) loading package files [############################################################################] 100%
(111/111) checking for file conflicts [############################################################################] 100%
(111/111) checking available disk space [############################################################################] 100%
( 1/111) installing linux-api-headers [############################################################################] 100%
( 2/111) installing tzdata [############################################################################] 100%
( 3/111) installing iana-etc [############################################################################] 100%
( 4/111) installing filesystem [############################################################################] 100%
warning: directory permissions differ on /tmp/baseline/work/root-image/run/
filesystem: 1777 package: 755
( 5/111) installing glibc [############################################################################] 100%
( 6/111) installing ncurses [############################################################################] 100%
( 7/111) installing readline [############################################################################] 100%
( 8/111) installing bash [############################################################################] 100%
( 9/111) installing bzip2 [############################################################################] 100%
( 10/111) installing gcc-libs [############################################################################] 100%
( 11/111) installing db [############################################################################] 100%
( 12/111) installing zlib [############################################################################] 100%
( 13/111) installing cracklib [############################################################################] 100%
( 14/111) installing libgssglue [############################################################################] 100%
( 15/111) installing libtirpc [############################################################################] 100%
( 16/111) installing pambase [############################################################################] 100%
( 17/111) installing pam [############################################################################] 100%
( 18/111) installing attr [############################################################################] 100%
( 19/111) installing acl [############################################################################] 100%
( 20/111) installing gmp [############################################################################] 100%
( 21/111) installing libcap [############################################################################] 100%
( 22/111) installing coreutils [############################################################################] 100%
( 23/111) installing run-parts [############################################################################] 100%
( 24/111) installing cronie [############################################################################] 100%
Optional dependencies for cronie
pm-utils: defer anacron on battery power
smtp-server: send job output via email
smtp-forwarder: forward job output to email server
( 25/111) installing expat [############################################################################] 100%
( 26/111) installing dbus [############################################################################] 100%
Optional dependencies for dbus
libx11: dbus-launch support
( 27/111) installing pcre [############################################################################] 100%
( 28/111) installing libffi [############################################################################] 100%
( 29/111) installing glib2 [############################################################################] 100%
Optional dependencies for glib2
python2: for gdbus-codegen and gtester-report
elfutils: gresource inspection tool
( 30/111) installing kbd [############################################################################] 100%
( 31/111) installing kmod [############################################################################] 100%
( 32/111) installing hwids [############################################################################] 100%
( 33/111) installing libgpg-error [############################################################################] 100%
( 34/111) installing libgcrypt [############################################################################] 100%
( 35/111) installing shadow [############################################################################] 100%
( 36/111) installing util-linux [############################################################################] 100%
( 37/111) installing xz [############################################################################] 100%
( 38/111) installing systemd [############################################################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Optional dependencies for systemd
cryptsetup: required for encrypted block devices [pending]
libmicrohttpd: systemd-journal-gatewayd
quota-tools: kernel-level quota management
python: systemd library bindings
systemd-sysvcompat: symlink package to provide sysvinit binaries [pending]
( 39/111) installing device-mapper [############################################################################] 100%
( 40/111) installing popt [############################################################################] 100%
( 41/111) installing cryptsetup [############################################################################] 100%
( 42/111) installing dhcpcd [############################################################################] 100%
( 43/111) installing diffutils [############################################################################] 100%
( 44/111) installing e2fsprogs [############################################################################] 100%
( 45/111) installing file [############################################################################] 100%
( 46/111) installing findutils [############################################################################] 100%
( 47/111) installing mpfr [############################################################################] 100%
( 48/111) installing gawk [############################################################################] 100%
( 49/111) installing gettext [############################################################################] 100%
Optional dependencies for gettext
cvs: for autopoint tool
( 50/111) installing grep [############################################################################] 100%
( 51/111) installing less [############################################################################] 100%
( 52/111) installing gzip [############################################################################] 100%
( 53/111) installing gdbm [############################################################################] 100%
( 54/111) installing perl [############################################################################] 100%
( 55/111) installing openssl [############################################################################] 100%
Optional dependencies for openssl
ca-certificates [pending]
( 56/111) installing libsasl [############################################################################] 100%
( 57/111) installing libldap [############################################################################] 100%
( 58/111) installing keyutils [############################################################################] 100%
( 59/111) installing krb5 [############################################################################] 100%
( 60/111) installing heirloom-mailx [############################################################################] 100%
Optional dependencies for heirloom-mailx
smtp-forwarder: for sending mail
( 61/111) installing inetutils [############################################################################] 100%
( 62/111) installing iptables [############################################################################] 100%
( 63/111) installing iproute2 [############################################################################] 100%
Optional dependencies for iproute2
linux-atm: ATM support
( 64/111) installing sysfsutils [############################################################################] 100%
( 65/111) installing iputils [############################################################################] 100%
Optional dependencies for iputils
xinetd: for tftpd
( 66/111) installing jfsutils [############################################################################] 100%
( 67/111) installing licenses [############################################################################] 100%
( 68/111) installing linux-firmware [############################################################################] 100%
( 69/111) installing mkinitcpio-busybox [############################################################################] 100%
( 70/111) installing lzo2 [############################################################################] 100%
( 71/111) installing libarchive [############################################################################] 100%
( 72/111) installing mkinitcpio [############################################################################] 100%
Optional dependencies for mkinitcpio
xz: Use lzma or xz compression for the initramfs image [pending]
bzip2: Use bzip2 compression for the initramfs image [pending]
lzop: Use lzo compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 73/111) installing linux [############################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Optional dependencies for linux
crda: to set the correct wireless channels of your country
( 74/111) installing logrotate [############################################################################] 100%
Optional dependencies for logrotate
cron: scheduled log rotation
( 75/111) installing lvm2 [############################################################################] 100%
( 76/111) installing groff [############################################################################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
libxaw: for gxditview
( 77/111) installing libpipeline [############################################################################] 100%
( 78/111) installing man-db [############################################################################] 100%
it's recommended to create an initial
database running as root:
"/usr/bin/mandb --quiet"
Optional dependencies for man-db
gzip [pending]
( 79/111) installing man-pages [############################################################################] 100%
( 80/111) installing mdadm [############################################################################] 100%
( 81/111) installing nano [############################################################################] 100%
( 82/111) installing openresolv [############################################################################] 100%
( 83/111) installing netctl [############################################################################] 100%
Optional dependencies for netctl
dialog: for the menu based wifi assistant
dhclient: for DHCP support (or dhcpcd)
dhcpcd: for DHCP support (or dhclient) [pending]
wpa_supplicant: for wireless networking support
ifplugd: for automatic wired connections through netctl-ifplugd
wpa_actiond: for automatic wireless connections through netctl-auto
ifenslave: for bond connections
bridge-utils: for bridge connections
ppp: for pppoe connections
( 84/111) installing sed [############################################################################] 100%
( 85/111) installing ca-certificates [############################################################################] 100%
( 86/111) installing libssh2 [############################################################################] 100%
( 87/111) installing curl [############################################################################] 100%
( 88/111) installing pth [############################################################################] 100%
( 89/111) installing libksba [############################################################################] 100%
( 90/111) installing libassuan [############################################################################] 100%
( 91/111) installing pinentry [############################################################################] 100%
Optional dependencies for pinentry
gtk2: for gtk2 backend
qt4: for qt4 backend
( 92/111) installing dirmngr [############################################################################] 100%
( 93/111) installing gnupg [############################################################################] 100%
Optional dependencies for gnupg
curl: gpg2keys_curl [pending]
libldap: gpg2keys_ldap [pending]
libusb-compat: scdaemon
( 94/111) installing gpgme [############################################################################] 100%
( 95/111) installing pacman-mirrorlist [############################################################################] 100%
( 96/111) installing archlinux-keyring [############################################################################] 100%
( 97/111) installing pacman [############################################################################] 100%
>>> Run `pacman-key --init; pacman-key --populate archlinux`
>>> to import the data required by pacman for package verification.
>>> See: https://www.archlinux.org/news/having-pacman-verify-packages
Optional dependencies for pacman
fakeroot: for makepkg usage as normal user
( 98/111) installing pciutils [############################################################################] 100%
( 99/111) installing pcmciautils [############################################################################] 100%
(100/111) installing procps-ng [############################################################################] 100%
(101/111) installing psmisc [############################################################################] 100%
(102/111) installing reiserfsprogs [############################################################################] 100%
(103/111) installing sysvinit-tools [############################################################################] 100%
(104/111) installing systemd-sysvcompat [############################################################################] 100%
(105/111) installing tar [############################################################################] 100%
(106/111) installing texinfo [############################################################################] 100%
(107/111) installing libusbx [############################################################################] 100%
(108/111) installing usbutils [############################################################################] 100%
Optional dependencies for usbutils
python2: for lsusb.py usage
coreutils: for lsusb.py usage [pending]
(109/111) installing vi [############################################################################] 100%
Optional dependencies for vi
heirloom-mailx: used by the preserve command for notification [pending]
(110/111) installing which [############################################################################] 100%
(111/111) installing xfsprogs [############################################################################] 100%
[mkarchiso] INFO: Packages installed successfully!
[mkarchiso] INFO: Installing packages to 'work/root-image/'...
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
resolving dependencies...
looking for inter-conflicts...
Packages (1):
Name New Version Net Change
core/syslinux 4.06-2 3.35 MiB
Total Installed Size: 3.35 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [############################################################################] 100%
(1/1) checking package integrity [############################################################################] 100%
(1/1) loading package files [############################################################################] 100%
(1/1) checking for file conflicts [############################################################################] 100%
(1/1) checking available disk space [############################################################################] 100%
(1/1) installing syslinux [############################################################################] 100%
==> If you want to use syslinux as your bootloader
==> edit /boot/syslinux/syslinux.cfg and run
==> # /usr/bin/syslinux-install_update -i -a -m
==> to install it.
Optional dependencies for syslinux
perl-passwd-md5: For md5pass
perl-digest-sha1: For sha1pass
mtools: For mkdiskimage and syslinux support
gptfdisk: For GPT support
util-linux: For isohybrid [installed]
[mkarchiso] INFO: Packages installed successfully!
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: run
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Run command: mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [archiso]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/archiso.img
==> Image generation successful
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: prepare
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Cleaning up what we can on root-image...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Target 'work/iso/arch/x86_64/root-image.fs.sfs' does not exist, making it from 'work/root-image'
[mkarchiso] INFO: Creating ext4 image of 1025 MiB...
mke2fs 1.42.8 (20-Jun-2013)
Discarding device blocks: done
warning: 256 blocks unused.
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65664 inodes, 262144 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8208 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Mounting 'work/root-image.fs' on 'work/mnt/root-image'
[mkarchiso] INFO: Total: 1008 MiB (100%) | Used: 2 MiB (1%) | Avail: 1007 MiB (99%)
[mkarchiso] INFO: Copying 'work/root-image/' to 'work/mnt/root-image/'...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Total: 1008 MiB (100%) | Used: 552 MiB (55%) | Avail: 457 MiB (45%)
[mkarchiso] INFO: Unmounting 'work/mnt/root-image'
[mkarchiso] INFO: Creating SquashFS image for 'work/root-image.fs', This may take some time...
Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on work/root-image.fs.sfs, block size 131072.
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 193188.71 Kbytes (188.66 Mbytes)
18.41% of uncompressed filesystem size (1049632.29 Kbytes)
Inode table size 10918 bytes (10.66 Kbytes)
33.19% of uncompressed inode table size (32898 bytes)
Directory table size 31 bytes (0.03 Kbytes)
88.57% of uncompressed directory table size (35 bytes)
Number of duplicate files found 0
Number of inodes 2
Number of files 1
Number of fragments 0
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 1
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
[mkarchiso] INFO: Image creation done in 01:46 minutes
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: checksum
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Target 'work/iso/arch/checksum.i686.md5' does not exist, making it from 'work/iso/arch'
[mkarchiso] INFO: Creating checksum file for self-test (i686)...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Target 'work/iso/arch/checksum.x86_64.md5' does not exist, making it from 'work/iso/arch'
[mkarchiso] INFO: Creating checksum file for self-test (x86_64)...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: iso
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Image name: archlinux-2013.07.21-x86_64.iso
[mkarchiso] INFO: Disk label: ARCH_201307
[mkarchiso] INFO: Disk publisher: Arch Linux <http://www.archlinux.org>
[mkarchiso] INFO: Disk application: Arch Linux Live/Rescue CD
[mkarchiso] INFO: Target 'out/archlinux-2013.07.21-x86_64.iso' does not exist, making it from 'work/iso'
[mkarchiso] INFO: Creating ISO image...
xorriso 1.3.0 : RockRidge filesystem manipulator, libburnia project.
Drive current: -outdev 'stdio:out/archlinux-2013.07.21-x86_64.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data, 4155m free
Added to ISO image: directory '/'='/tmp/baseline/work/iso'
xorriso : UPDATE : 16 files added in 1 seconds
xorriso : UPDATE : 16 files added in 1 seconds
xorriso : NOTE : Copying to System Area: 432 bytes from file '/tmp/baseline/work/iso/isolinux/isohdpfx.bin'
libisofs: NOTE : Aligned image size to cylinder size by 177 blocks
xorriso : UPDATE : 16.90% done
xorriso : UPDATE : 82.85% done
ISO image produced: 105472 sectors
Written to medium : 105472 sectors at LBA 0
Writing to 'stdio:out/archlinux-2013.07.21-x86_64.iso' completed successfully.
[mkarchiso] INFO: Done! | 206M out/archlinux-2013.07.21-x86_64.iso
Booting:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: running hook [archiso]
:: Mounting '/dev/disk/by-label/ARCH_201307' to '/run/archiso/bootmnt'
:: Device '/dev/disk/by-label/ARCH_201307' mounted successfully.
:: Mounting /run/archiso/cowspace (tmpfs) filesystem, size=75%...
:: Mounting '/dev/loop0' to '/run/archiso/sfs/root-image'
:: Device '/dev/loop0' mounted successfully.
:: Creating '/run/archiso/cowspace/persistent_ARCH_201307/x86_64/root-image.cow' as non-persistent.
:: Mounting '/dev/mapper/arch_root-image' to '/new_root/'
:: Device '/dev/mapper/arch_root-image' mounted successfully.
:: running cleanup hook [udev]
Welcome to Arch Linux!
Expecting device dev-ttyS0.device...
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Starting Setup Virtual Console...
Starting Create static device nodes in /dev...
Mounting Huge Pages File System...
Starting Apply Kernel Variables...
Mounting Debug File System...
Mounting Configuration File System...
Starting udev Coldplug all Devices...
Starting Journal Service...
[ OK ] Started Journal Service.
[ OK ] Reached target Swap.
Mounting Temporary Directory...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ OK ] Started Create static device nodes in /dev.
[ OK ] Mounted Configuration File System.
[ OK ] Mounted Temporary Directory.
Starting udev Kernel Device Manager...
Starting Load Random Seed...
[ OK ] Started Load Random Seed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Recreate Volatile Files and Directories...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Recreate Volatile Files and Directories.
Starting Update UTMP about System Reboot/Shutdown...
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Update UTMP about System Reboot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Permit User Sessions...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting Login Service...
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ OK ] Started Login Service.
[ OK ] Found device /dev/ttyS0.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Arch Linux 3.9.9-1-ARCH (ttyS0)
localhost login: -
Can't seem to install ati-driver opengl libs
Hi there.
I recently recovered from a mis-upgrade to Xfree86-4.4 (using a Radeon 9600, which is unsupported).
Anyways, I just realized that I can't get 3d acceleration working. I did fglrxinfo, and the system says this:
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
According to an FAQ I came across, this is supposed to be the ATI's OpenGL libs.
I have uninstalled and reinstalled Xfree86, did the same with the ATI Drivers, and recompiled the fglrx module multiple times, but it is still the same: no ATI OGL drivers installed.
Can somebody help me? Please?
/scratchkeep it together. keep it together.. :?
OK. Here are my config files:
rc.local and modprobe.conf are empty.
rc.conf (removed the comments)
KEYMAP=us
HARDWARECLOCK="localtime"
MODULES=(!usbserial !ide-scsi
fglrx
usb-ohci
snd-intel8x0
snd-pcm-oss
snd-mixer-oss
snd-seq-oss
nvnet
8211
"dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth1="dhcp"
INTERFACES=(lo eth1 eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(!pcmcia network crond inetd)
lsmod gives this:
fglrx 173928 0
keybdev 2244 0 (unused)
mousedev 4180 1
hid 21668 0 (unused)
input 3520 0 [keybdev mousedev hid]
8211 63208 1
soundcore 3972 6 [snd]
usb-ohci 18888 0 (unused)
vfat 10732 1 (autoclean)
fat 32568 0 (autoclean) [vfat]
and the big one: xfreeconfig-4:
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# Option "Protocol" "Xqueue"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-71
VertRefresh 50-160
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=4152
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Thanks for your help.
/scratch -
Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5
My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393} 2013-10-14 21:53:00:256-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1} 2013-10-15 04:15:54:069-0700 1 162 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Download Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF} 2013-10-15 12:10:38:196-0700 1 193 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C} 2013-10-15 12:15:25:676-0700 1 183 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0} 2013-10-15 12:15:25:766-0700 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D} 2013-10-15 19:29:31:486-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65} 2013-10-15 19:29:49:702-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D} 2013-10-15 19:30:05:744-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418} 2013-10-15 19:30:08:753-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD} 2013-10-15 20:00:05:044-0700 1 183 101 {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6} 501 0 wusa Success Content Install Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D} 2013-10-16 00:11:39:832-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 c8000247 AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End! -
Hi Experts,
We have installed UISKPI01 in SAP NetWeaver Gateway System for Fiori Analytical Apps (KPI modeler is necessary to model the KPI) but while trying to create and Save the Group, we are Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}". Similarly, when we are trying to edit the existing KPI template and assigning the Variants and Evaluations, we are facing the same error as failed to detect the sap language of the current session language","status":500.
Any idea on above error?
Thanking you,
~ MahendraHello Mahendra,
Check if you have entries in the T002 table of SAP_SSB schema.
If not follow the steps mentioned in the admin guide of SAP Smart business to populate data.
This should resolve this issue.
Note: My assumption is that, you are accessing the KPI modeler in English Language.
Thanks,
Debasish -
Windows Install fails to detect VSTO 4.0 in Windows machine
I’ve to install excel based application developed in VS 2010.
Windows installer fails while detecting VSTO in Windows 7/8/8.1. Its perquisites are .Net framework 4.0 client frame work and VSTO 4.0.
Even we have installed VSTO manually and re-run our setup and again we are getting the same error (“Installer was not able to automatically download the VSTO installation”), the custom message. Don’t know what is blocking to detect VSTO on some particular
machine. I'm using only this condition "VSTORUNTIMEREDIST>="10.0.30319" as in Launch Conditions from last 3 years.
Now from last couple of months I'm getting this error when instating my application, somehow when I add another condition i.e. VSTORUNTIMEREDIST>="10.0.30319" OR OFFICERUNTIME>=”10.0.21022”, it works properly.
I want to know that is there any windows patch is released due to which my installer is not able to detect VSTO in machine.
Thanks in advance.
Thanks Utshek Jain> Is VSTO Runtime detection depends on full edition of .NET framework?
I have never seen the client profile mentioned in MSDN. For example, take a look at the
Running Solutions in Different Versions of Microsoft Office article which provides the following info:
Version of Office targeted by the project template
Target .NET Framework of the project1
Versions of Office that can run the solution
Required runtime on end user computer
Office 2013
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 3.5
Office 2013
Office 2010
Visual Studio 2010 Tools for Office Runtime
2007 Microsoft Office system
.NET Framework 4,
.NET Framework 4.5,
or
.NET Framework 3.5
Office 2013
Office 2010
2007 Microsoft Office system
Visual Studio 2010 Tools for Office Runtime
BTW Did you include the required interop files in the installer? -
X fails to detect monitor supported resolutions
I have 3 monitors connected to a Radeon HD 7750, using the radeon driver:
Left: NEC MultiSync 90GX², 1280x1024, connected via DisplayPort-to-VGA adaptor
Middle: Samsung SyncMaster BX2335, 1920x1080, connected via DVI
Right: LG Flatron Wide, 1680x1050, connected via HDMI
On every reboot (warm or cold), X fails to detect the NEC monitor's supported resolutions. xrandr will only set it to 1024x768 or less, and it shows "no signal". However if I disconnect the VGA cable, plug it into another monitor (which is broken, but still powers on), and run xrandr again, it lists up to 1280x1024. If I then set the correct modes and layouts, then return the VGA cable to the NEC monitor, it works just fine. Turning the display off via xset doesn't cause any issue either. So on every reboot I have to move the cable to a spare monitor, set up xrandr, then move the cable back.
How can I save this working configuration and force X to apply it on boot even though the monitor for some reason claims to not support it?
I didn't have this issue with Ubuntu, but my setup was a bit different there, so possibly it just didn't manifest.
Here is the Xorg.0.log and journalctl -k from the most recent boot. The get-edid output is also interesting (and contains some control characters which pastebin removed).The NEC on DVI would be only temporarily to get it's real edid-data .
Once you got that in a file, you can use a special kernel parameter at boot to force use of the real edid-data for the NEC monitor.
https://wiki.archlinux.org/index.php/Ke … s_and_EDID describes how it could be done.
Note that configuring this is tricky. -
Acrobat X selection tool fails to detect paragraphs of text...
Acrobat X selection tool fails to detect paragraphs of text. Manually selected paragraphs have broken sentences with line breaks. This problem is also noticed when you attempt to triple click a paragraph and only one line of text is selected instead of a paragraph. Can this be fixed?
can't it tell by the visual formatting of indents, text proximity/clusters, etc? if humans can tell, why can't acrobat be trained to tell?
-
Failed to detect if this server is joined to a server farm
Hi,
We run our intranet on a virtual server. the other day it crashed and we restored it from a previous point
However when we launch the intranet we just get a an unexpected error has occurred. I am able to get into central admin but that's about it
I though of maybe running the product config wizard but it get an error saying "failed to detect if this server is joined to a server farm. Possible reasons for this failure could be that you no longer have the appropriate permissions to the server
farm, the database server hosting the server farm is in responsive, the configuration database is inaccessible or this server has been removed from the server farm"
this is what the logs it tell you to look in says:01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the server string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterDatabaseHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterDatabaseHelp is The configuration database name.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Leaving function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseDatabaseNameLabel is D&atabase name:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationDatabaseNameLabel is database name
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the database string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterAdminContentDatabaseHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterAdminContentDatabaseHelp is The Central Administration Web Application content database name.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Leaving function Common.CreateUniqueGuidString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is AdminContentDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id AdminContentDatabaseNameLabel is Central Administration Web Application content database name:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is AdminContentDatabaseValidationDatabaseNameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id AdminContentDatabaseValidationDatabaseNameLabel is Central Administration Web Application content database name
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the admincontentdatabase string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterSqlAuthenticationUserHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterSqlAuthenticationUserHelp is The SQL server user name used for SQL authentication.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseUsernameLabel is Sql database user:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationUsernameLabel is Sql database user
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the dbuser string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterSqlAuthenticationPasswordHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseParameterSqlAuthenticationPasswordHelp is The SQL server password used for SQL authentication.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabasePasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabasePasswordLabel is Sql database password:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationPasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationPasswordLabel is Sql database password
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the dbpassword string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is FarmUserAccountHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id FarmUserAccountHelp is Server farm administrator user account.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseFarmUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseFarmUsernameLabel is &Username:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationFarmUsernameLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationFarmUsernameLabel is username
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the user string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is FarmUserAccountPasswordHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id FarmUserAccountPasswordHelp is Server farm administrator user account password.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseFarmPasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseFarmPasswordLabel is &Password:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationFarmPasswordLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationFarmPasswordLabel is password
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the password string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is MasterPassphraseHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id MasterPassphraseHelp is Passphrase used to join the server farm. Note: this must be identical on all the server farm machines.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseMasterPassphraseLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseMasterPassphraseLabel is Passp&hrase:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationMasterPassphraseLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationMasterPassphraseLabel is passphrase
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the passphrase string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeOrParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ActiveDirectoryDomainParameterHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ActiveDirectoryDomainParameterHelp is Active Directory domain name used for the server farm.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseActiveDirectoryDomainLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseActiveDirectoryDomainLabel is Active Directory Do&main:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationActiveDirectoryDomainLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationActiveDirectoryDomainLabel is Active Directory Domain
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the addomain string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ActiveDirectoryOrganizationUnitParameterHelp for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ActiveDirectoryOrganizationUnitParameterHelp is Active Directory organization unit name used for the server farm.
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseActiveDirectoryOrganizationUnitLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseActiveDirectoryOrganizationUnitLabel is Active Directory Or&ganizational Unit:
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseValidationActiveDirectoryOrganizationUnitLabel for language English (United States)
01/30/2014 10:03:01 1 INF Resource retrieved id ConfigurationDatabaseValidationActiveDirectoryOrganizationUnitLabel is Active Directory Organizational Unit
01/30/2014 10:03:01 1 INF Leaving function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Entering function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Initialze
01/30/2014 10:03:01 1 INF Leaving function Parameter.Parameter
01/30/2014 10:03:01 1 INF Entering function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Creating the adorgunit string exposed parameter
01/30/2014 10:03:01 1 INF Leaving function StringExposedParameter.StringExposedParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddExcludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Leaving function Parameter.AddIncludeParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter create to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry create to collection.
01/30/2014 10:03:01 1 INF Adding object with value create to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter disconnect to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry disconnect to collection.
01/30/2014 10:03:01 1 INF Adding object with value disconnect to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter connect to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry connect to collection.
01/30/2014 10:03:01 1 INF Adding object with value connect to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter server to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry server to collection.
01/30/2014 10:03:01 1 INF Adding object with value server to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter database to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry database to collection.
01/30/2014 10:03:01 1 INF Adding object with value database to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter dbuser to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry dbuser to collection.
01/30/2014 10:03:01 1 INF Adding object with value dbuser to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter dbpassword to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry dbpassword to collection.
01/30/2014 10:03:01 1 INF Adding object with value dbpassword to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter user to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry user to collection.
01/30/2014 10:03:01 1 INF Adding object with value user to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter password to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry password to collection.
01/30/2014 10:03:01 1 INF Adding object with value password to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter passphrase to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry passphrase to collection.
01/30/2014 10:03:01 1 INF Adding object with value passphrase to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter addomain to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry addomain to collection.
01/30/2014 10:03:01 1 INF Adding object with value addomain to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter adorgunit to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry adorgunit to collection.
01/30/2014 10:03:01 1 INF Adding object with value adorgunit to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function Command.AddParameter
01/30/2014 10:03:01 1 INF Adding parameter admincontentdatabase to command configdb
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Adding entry admincontentdatabase to collection.
01/30/2014 10:03:01 1 INF Adding object with value admincontentdatabase to the collection
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.Add
01/30/2014 10:03:01 1 INF Leaving function Command.AddParameter
01/30/2014 10:03:01 1 INF Entering function CommandCollectionBase.CommandCollectionBase
01/30/2014 10:03:01 1 INF Leaving function CommandCollectionBase.CommandCollectionBase
01/30/2014 10:03:01 1 INF Entering function Command.Command
01/30/2014 10:03:01 1 INF Leaving function Command.Command
01/30/2014 10:03:01 1 INF Entering function StringResourceManager.GetResourceString
01/30/2014 10:03:01 1 INF Resource id to be retrieved is ConfigurationDatabaseParameterNoInstallCheckHelp for language English (United States) -
I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages -
Failed to detect hard drive at the first boot
My new system always failed to detect the hard drive at the first boot, but it's ok if restart it. Not use Raid (disabled). Any help will be greatly appreciated. ?(
Yingsheng
KT3-Ultra-ARU
AMD XP1900
GF2MX400
512 PC2100 Mushkin
300W Antec PSU
Western 40G7200PM
Buslink DVD-ROM
Sony CD-RWQuote
Originally posted by Yingsheng
My new system always failed to detect the hard drive at the first boot, but it's ok if restart it. Not use Raid (disabled). Any help will be greatly appreciated
That is another classic symptom of a WD hard drive being jumpered as either a master or a slave when there is no other drive on the cable with it. If the drive is the only drive on the cable, then remove the jumper from the drive. -
Hello
I fitted a Samsung SSD to my xw6400, after updating the BIOS and applying the BIOS settings outlined elsewhere. I never did manage to get AHCI Mode actuivated, even after doing a complete reinstall of Windows 8 and 8.1, but the performance boost is quite good enough without it.
My concern is that sometimes when I restart the machine from Windows, it will fail to detect the SSD, which is the system drive. It doesn't happen often and it's not a big deal anyway, since, if I switch off and on again, it does always discover it at power-on. This may prove to be a problem, though, if I'm away from home and need to access the machine remotely. Of course, I could avoid it by switching off Windows automatic updates before I leave home, but the problem is being old, so I will probably forget.
Does anyone have any ideas how I can remedy this?
Thanks in advance.Hi:
If you are using a SATA III SSD, this may be the problem...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
I had the same thing happen to me on my dc7800 CMT when I installed a SATA III WD mechanical hard drive.
When I put the HP 1 TB Seagate hard drive from my HP 8200 Elite into the dc7800, it worked just fine as did the WD SATA III drive in my 8200 Elite. -
Dear all,
I have been reinstalling CS5 at least 10 times (without exagerating) and I keep having this error popping: AE error: AE_OpenGL: Failed to create OpenGL context! Turning off OpenGL. (5065 :: 0)
Every time I save it reappears and I don't have a clue what it is.
At first I thought it had something to do with my video card driver ATI HD radeon 5870 but everything seems fine and up to date there.
Any clue?
I would appreciate any help!!!
Thanks,
EtienneEvery time I save it reappears and I don't have a clue what it is.
Simply turn off OpenGL in the AE prefs.
everything seems fine and up to date there.
Mustn't mean anything. The latest drivers are not necessarily always the best/ most compatible ones and things like screen resolution sometimes have a strange influence as well... You could always try installing a different version, of course, but since AE realyl doesn't use OpenGL that much, that may be more trouble than it's worth...
Mylenium
Maybe you are looking for
-
How to restirct the access to irj/go/km/docs
Hi Experts; Need your help!!!!!!! We want to restrict the anonymous users from accessing the content of the Km through webdav url: https://<>/irj/go/km/docs. How ever the contents of Documents folder have been used on our portal logon page also. So
-
HT201303 Can I use a credit card from Peru?
I have a credit card from Peru and am unable to add this to my billing account, can I only use a US credit card for Itunes?
-
Macbook Air keys not working and erratic trackpad
I purchased my macbook air 13" in 2o11. About 14 months after I purchased it, the trackpad was acting erratic. I took it to the genius bar and they recommended replacing it. Since my initial warranty had expired, I decided to replace it myself. Every
-
Update 7.1.1 problems
Just tried to update to 7.1.1 and my phone is fried. I have an icon with USB cord and the iTunes icon and that's it.
-
IPhone converting email body to attachments on reply or forward
All of a sudden when we reply or forward an email it no longer sends the original message of the email in the body it converts it to attachments that can not be opened. iPhone os 4.? working ActiveSync through Exchange Server 2007 with Outlook 2003 &