Zyxel nsa 310 for os 10.4.11

Is there any one with info to get this thing going?

I just bought on of these and they do have a software download of the setup wizard for mac from their US site:
http://us.zyxel.com/Support/Download-Library-Result.aspx?mif=20110426084939

Similar Messages

BH Home Hum

Evening,
I have my portable hard drive plugged into the USB port of my BT Home Hub. I can use this no problem, the issue I have is that it is so slow to copy things over to my machine or add/delete from Itunes. Does anyone have any tips on how to speed up?
Cheers
CC

celticchief wrote:
Cheers so I plug one of these into the back of my Home Hub and that will be quicker?
Yes, that is what a NAS is for. I have a Zyxel NSA210 NAS which has a 1TB disk inside, which holds all of our music and video, and can stream to any device on the network.
I have found it 100% reliable, and never disappears off the network.
This has been superceded by the Zyxel NSA 310, which has a much faster file transfer rate.
There is a picture of my home network here.
My home network
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

10.4.8 network issue with some routers (Zyxel)

Since I have installed 10.4.8 there is a problem with my Zyxel Prestige 310 router, which after a short period of time "hangs up" - so nobody in the network has Internet conection ( PC's and other Macs with 10.4.7).
After restarting the router everything works fine, until I start a Mac with 10.4.8..
This happens on Intel and G5 Macs..
Today I had a long phonecall with my Provider here in Austria, who told me that a lot of people are having this problem - all with Zyxel Routers - but he doesn't know a solution.
He (and me) is waiting for a fix from apple...:-)

I also have an issue with the 10.4.8 update and a Zyxel router, although mine is not as severe as yours.
Mine has to do with WPA encryption and a timeout setting.
The thread is here:
http://discussions.apple.com/thread.jspa?messageID=3246932
So, maybe this helps?
MacBook white, 2.0 GHz, 1,25 GB RAM Mac OS X (10.4.8)

Adobe Reader 11.0.09 stops responding for 30 seconds after start

When starting AR 11 (either via it's Icon or via a .pdf document), AR starts normally but after a few seconds the interface freezes and stops responding for around 30 seconds. Logging the start-up with Process Monitor gives the output below (actually two instances, only one is shown). When the second instance times out (I'm guessing that is what's going on), AR11 starts responding again.
The whole problem disappears if the plugin Weblink.api is removed, with the unfortunate side effect that the Tools pane on the right also disapperas (replaced with a spinning Icon but AR11 is otherwise responding well).
The server that AR11 is installed on does not have any Internet access whatsoever. My guess is that AR11 is looking for the host above for some reason and need to time out before it is available for use. This is of course an extremely poor design and we wish to resolve it somehow.. Ideas anyone?
/Patrik

Solution found. By enabling a lockdown feature, we prevented Adobe from trying to muck about getting online. Actually NSA provides recommendations on how to lock down Adobe Reader, google "NSA recommendations for configuring Adobe Reader XI in a Windows Environment". We only used:
HKLM\Software\Policies\Adobe\<product>\<version>\FeatureLockDown\cCloud
bDisableADCFileStore REG_DWORD Set to 1

I have adobe reader 11.0.09 for windows 7 pdf are opening but minimize and close icon are not showing

please help

Solution found. By enabling a lockdown feature, we prevented Adobe from trying to muck about getting online. Actually NSA provides recommendations on how to lock down Adobe Reader, google "NSA recommendations for configuring Adobe Reader XI in a Windows Environment". We only used:
HKLM\Software\Policies\Adobe\<product>\<version>\FeatureLockDown\cCloud
bDisableADCFileStore REG_DWORD Set to 1

Getting help for setting up a "good" network

Hi all,
I've been "managing" our network and doing the IT stuff even though I'm not a "true" IT guy, just a graphic artist dabbling in the stuff. I want to get some help on moving our multiple public IP address network to a more secure single Public IP address. I don't know where I can get that help so I'm taking my chances here even though this is not specific to Apple server.
Here's the equipment we have:
Apple Extreme dual band
Apple Server 10.6.3 for file services, iCal, iChat, DNS, Open directory, Address book, Web.
FTP server using CrushFTP on a Mac Pro running 10.6.3
Two ADSL modem from same ISP, one 16 Mbps the other 10 Mbps
a Peplink Balance 310 for load balancing the traffic (and it's not working as advertised as far as I could configure it.
30 static IP addresses hooked to the 16Mbps modem/router
a gigabit switch ASANTE Intracore IC36240
a 100 mbs switch ASANTE intracore 3524
I'd also like to be able to log into any machine remotely with ARD. Right now, it's a peace of cake with everyone having it's own public IP address, but how will I make this work with DHCP? I'd also like to be able to have VPN enabled.
I have no idea how to make the best of this equipment so if you have any insight or know where I can get some help to set that up, that'd be great!

There are as many 'good' networks as there are network requirements and hardware combinations.
Get a server-grade firewall, if that peplink router can't provide that function.
Figure out what's up with the peplink router.
If the peplink isn't working and if it doesn't have firewall capabilities (I've not read the specs), I'd replace it with a firewall with dual uplinks.
Once you get DHCP going, you'll have two IP subnets, and you'll have to set up subnet routing for your gear. Other than that (and with that external server-grade firewall), the remote connections are straightforward.
The server-grade firewall should have VPN end-point servers for pptp and l2tp, and probably ssl, and probably a DMZ. RADIUS support, likely. For this case, dual uplinks and support for running both.
Stay out of 192.168.0.0/16 for your private stuff.
I'd likely set up the public static IP for the router, the DMZ, and key stuff that needs to be public facing. I might well run the rest of the stuff in a private IP block.
None of which involves Mac OS X.

Do I have to pay for it?

I brought my Macbook Pro in to get fixed because I was having this problem...
http://discussions.apple.com/thread.jspa?threadID=1727530
This was before I found this support forum and that there was a fix for it. My problem is I am about 3 months out of warranty so it cost me $310. I haven't gotten it back yet or paid for it but I am curious if its my fault the "genius" tried it on a couple displays and just decided it was a Logic Board problem when it wasn't. I don't want to drop $310 on something because someone was ignorant of a situation that is obviously well known on the Apple support site.
If I go in tomorrow do you think I will have a problem arguing my point or am I out $310?

the problem with that issue is that people are too quick to conclude that it is automatically the GPU that has failed on them and thus go in to get the logicboard replaced.
the problem was likely due to the inverter board, which i believe is related to the display and not the GPU.
so are they charging you $310 for a logicboard replacement that wasn't necessary or are they charging you $310 for replacing a different part altogether?
if the former, then yes you can probably argue the point since the repair should be free even if it was in fact a defective GPU.

Zyxel pk500z router/wireless modem loses wireless connectivity with imac

My iMac loses wireless connectivity with wirelss internet from my Qwest ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

OSX and wireless (third party) print server problems - 'host is busy' again

The setup:
MBP running OSX 10.5.2
Zyxel NSA-220 (with latest firmware) hardwired to a Lynksys wireless router (running Tomato firmware)
Canon PIXMA iP4500 with CUPS+Gutenprint v5.1.7 drivers
I'm trying to set up the NSA as a print server. I can ping the NSA, it shows up fine in finder and I can access the shares on the discs - all wirelessly.
However the Canon setup program can't locate the printer when it tries to align the print heads, so I tried using Print & Fax to set up IP printing, with LPD as protocol and the IP address of the NSA, selecting CUPS drivers rather than the Canon ones.
The issue comes when I try to print and get locked in a 'Network host x.x.x.x is busy' cycle that never ends. I switched from M$ about 12 months and think I'm reasonably computer literate but feel like a mac newbie when problems like this hit. Grateful for any advice.

I helped another postee with a SimpleShare NAS. Reading the user documentation for the device, it showed the Windows connections using smb, ie you simply browse to the device via Network Neighborhood, double-click then select the printer name.
To use smb on the Mac, you select Windows Printing when you add the printer, then browse to the workgroup, then the Zyxel computer name and then the printer share name. Note that if the printer share name has spaces and too many characters, it can cause problems so keep the name short, such as iP4500, and don't have any spaces.
With regards to the current use of LPD as the protocol, this will be the cause of the network busy error as the device probably doesn't support UNIX print services (which btw is what you need to enable on Windows Server if you were to connect the same way).
One final note. The recent Security Update 2008-002 stopped some users from connecting to their current Windows share. One workaround has been to add the user account information into the queue name. This can be done by modifying the view for the Print & Fax Add Printer dialog box, so that the Advanced Printing option appears. Control-click on the icon bar in the Add Printer dialog box and then select Customize then Advanced. Within this selection will be the option to use Windows Printing via SAMBA. This lets you add the printer with all the necessary info, such as the example following.
smb://NSAusername:password@NSA_IPAddress/iP4500
Once you have entered the queue name, you can then browse to the Canon Gutenprint v5.1.7 iP4500 driver.
HTH
PaHu

My Verizon Frustration (to put it mildly). Read if you live in AK

Began when I ordered an iPhone 4 on August 13. I needed to upgrade because I had an old phone and moved to Alaska, where Verizon was not established (I was on roaming). Thought Verizon was a good enough company to stick with. Two and half years later, or August 13, my old phone finally had it and I called to get a new one. The sales person said I could get an iPhone with my upgrade for 99 cents. And she said could activate it up here because Verizon had towers in Anchorage where I live.
Wrong. I got the phone and it would not do anything, Had to call on my old phone and talk to tech support who said the incompetent salesperson had forgot to enter my new iPhone in the system. But they would correct it and they would shut off my old phone and then I could activate it.
Wrong. They shut off my old phone, and the new one would not activate. I was now phone-less. I had go onto Verizon online to "chat" with another tech person, who after 25 minutes of research told me I could not activate an iPhone 4 in Anchorage. She told me to send it to the lower 48 and have a friend/family member activate and send it back. Yeah...a Verizon employee told me to inconvenience family or friends and pay for shipping to correct a mistake they made. I suggest to her that I send it to Seattle (nearest Verizon store) and they reimburse shipping and they activate it. She had to check and make sure this was okay. It was. I shipped it to the store and received it back a few days later and it was supposed to be activated.
Wrong. Only the phone was activated, the data was not, no internet or pictures or visual voicemail. Had to call and talk to another tech person who said they would put an order in to have the towers checked because that was probably the problem. I got a text the next day that said my problem was fixed.
Wrong. It was not. Called Verizon again and asked to talk to a supervisor. They transferred me to a girl who sounded like she had no clue what was going on, I mean not even on a basic level. I asked her if she was a supervisor and she said no. Asked again to speak to a supervisor and they transferred me to one in North Carolina. Guess what he discovered? The incompetent person at the Verizon store in WA never activated my data.
Had to send the iPhone out again to get activated to the same store…I shipped it September 5th, tracking receipts show it arrived September 6 at 1000 am. I still do not have it back. I called the store using a co-workers phone on my lunch break on the 11th and told them I needed them to fix it and send it back (they said they were very busy). The supervisor in North Carolina said the WA store fixed it on the 12th (probably after I called and told them to) and they should be shipping it out soon. I emailed the supervisor in NC and asked him to check and get a tracking number a couple days ago. Still no phone and no idea when I will receive it.
So, since purchasing my iPhone, I have paid for one month’s worth of data I never got to use and to date…15 days of phone service I cannot use. And I have been without a phone for a total of 15 days.
And every time I have to borrow a friends AT&T phone to make a call, I get to tell them this story.
I have illustrated this story for a couple of reasons.
1. Yes I have saved it and I am going to send it to the highest level supervisor I possibly can.
2. To possibly save you the frustration of this experience.
Thank you

I finally received my iPhone 4 back yesterday. They overnight delivered it after I called the store for the 9th time (literally, the 9th) and told them I was out of patience. I asked for a supervisor to call me back (on my friends phone) but that never happened. I will not go into anymore details about how negative this experience was because I have already put so much effort and time into it that it's ridiculous.
I also have been a Verizon customer for more than six years and had never encountered an issue like this. I am a patient person and a pretty easy-going customer. But this was such a bad experience I'm looking forward to my contract ending so I can go to another phone company. Besides, I can't say I'm too comfortable with how Verizon handled the NSA probing for consumer information.
If you are considering buying anything from Verizon, like any other wireless retailer, they will do an outstanding job of selling things to you. And in general, their coverage is good. After you become a customer, you will take a backseat to anyone wanting to buy stuff (in all fairness, again, this is like most retailers). If you live in Alaska, go with a local company like AT&T because right now, you are not even on Verizon's map (literally, if you put in an AK zip-code on their site it will not recognize it). And, as I have learned, if you are already a Verizon customer when you get here your experience may be frustrating.
When seeking out a supervisor at Verizon, here is what I have learned: They do not always transfer you to one when you request it, so make sure if they do that you are actually talking to a supervisor (get a name and title). They all seem to operate independently, in other words, if a supervisor tells you they will "reach-out" to another employee and ensure they solve the problem- make sure you as a customer follow-up on it. Sometimes you have to do the job yourself and call the employee and instruct them as a customer to do the job...several times (pretty disturbing if you think about it). From my experience, supervisors do not follow-up on instructions they presumably give co-workers or employees and they do not ensure the tasks get done (they may not be able to, in some companies "supervisor" is a powerless title, or a title handed out for a variety of reasons not always related to ability to do the job).
Well I hope this helps anyone seeking info regarding Verizon service, especially in AK.
Thank you for reading.

How do I erase the free space on macbook pro retina?

I went to erase the free space on my MacBook Pro Retina in the Disk Utility but it says not available for this type of drive. Is there a way I can get around this?

You can't use Disk Utility to securely erase a Solid State Disk drive, because of the fact that SSD's have limited write capability, unlike hard drives, thus have to protect the sectors from as little writes as possible.
In fact TRIM (wear leveling) is enabled to write new data to the least used sectors on a SSD each time.
The NSA guidelines for secure data destruction on SSD's is to grind them into a fine powder.
If you don't require this level of data destruction, you can do this trick below, but not often or you'll premaurely wear out your SSD.
Finder > Duplicate a small file repeatly in a folder until slightly more than 50% of the remaining free space on the SSD is used up, (use Activity Monitor) then delete this folder.
Then duplicate a different small file repeatly in another folder in the same manner.
What this will do is, because of the small file, OS X will fill the smallest unused spots on the SSD, the duplicates will fill the remaining free space half way, then the second folder will (because of TRIM) fill the other remaining 50% of the free space.
You can't fill your boot drive or the machine can refuse to function or boot, but because of the wear leveling this should overwrite all your available free space on the SSD once.
If you have a laptop and TimeMachine, there is a hidden database on the boot drive which will store a copy of the deleted data.
Then there is "versions" and it's possible a copy of the deleted data is stored in that cache file still on the SSD.
I can advise how to delete the TimeMachine backup file on the boot drive, but not the "versions" database or what it contains.
How do I securely delete data from the machine?
If your really paranoid it's likely best to reformat the entire MacintoshHD partition from recovery and then with a new user, then do the Finder > Duplicate procedure to overwrite the deleted data off the SSD, this way the "versions" and TimeMachine databases are also overwritten.
Nothing is safe anymore.

How do I increase the processing speed on my Pro Retina in Final Cut ProX?

I have a 2012 pro retina w/ 16 GB, I am trying to make a time lapse video in FinalCut w/ appx 10,000 stills shot at 1080 on a GoPro. I know this is a lot and life would be a lot easier w/ a Thunderbolt. I'm using CleanMyMac2 to free up some space and am moving the nearly 80 GB of photos onto a 1TB external to see if that speeds processing up a bit.
Any other thoughts/suggestions on increasing speed?

You can't use Disk Utility to securely erase a Solid State Disk drive, because of the fact that SSD's have limited write capability, unlike hard drives, thus have to protect the sectors from as little writes as possible.
In fact TRIM (wear leveling) is enabled to write new data to the least used sectors on a SSD each time.
The NSA guidelines for secure data destruction on SSD's is to grind them into a fine powder.
If you don't require this level of data destruction, you can do this trick below, but not often or you'll premaurely wear out your SSD.
Finder > Duplicate a small file repeatly in a folder until slightly more than 50% of the remaining free space on the SSD is used up, (use Activity Monitor) then delete this folder.
Then duplicate a different small file repeatly in another folder in the same manner.
What this will do is, because of the small file, OS X will fill the smallest unused spots on the SSD, the duplicates will fill the remaining free space half way, then the second folder will (because of TRIM) fill the other remaining 50% of the free space.
You can't fill your boot drive or the machine can refuse to function or boot, but because of the wear leveling this should overwrite all your available free space on the SSD once.
If you have a laptop and TimeMachine, there is a hidden database on the boot drive which will store a copy of the deleted data.
Then there is "versions" and it's possible a copy of the deleted data is stored in that cache file still on the SSD.
I can advise how to delete the TimeMachine backup file on the boot drive, but not the "versions" database or what it contains.
How do I securely delete data from the machine?
If your really paranoid it's likely best to reformat the entire MacintoshHD partition from recovery and then with a new user, then do the Finder > Duplicate procedure to overwrite the deleted data off the SSD, this way the "versions" and TimeMachine databases are also overwritten.
Nothing is safe anymore.

Need help forming randomly colored lines, that are equidistant(ex included)

My assignment: The
top-right cell requires horizontal lines that are equidistant in the cell. Each line is 10 pixels apart. Additionally, the lines need to be colored randomly in any possible red, green and blue range.
example: http://i68.photobucket.com/albums/i35/stxda/example.jpg
(example of what I need to do)
what I have now: http://i68.photobucket.com/albums/i35/stxda/current.jpg
I have all the lines coded for the top right cell, but I do not know how to get the colors random. I only know how to set all the lines to one single color.
Below is my coding:
(please try this out and help me code it)
my AIM screen name is sTxDa if there are any questions/comments
import java.awt.*;
import java.applet.*;
import java.util.*;
public class Lab06G90 extends Applet
public void paint(Graphics g)
// BELOW is for the top left cell and box (which is int a and the box's frame)
int width = 800;
int height = 600;
g.drawRect(10,10,width,height);
g.drawLine(410,10,410,610);
g.drawLine(10,310,810,310);
for (int a = 20; a <= 400; a += 10)
g.drawLine(a,20,a,290);
// BELOW is for the top right cell, which is int b. so far
// i've only done the lines, and not yet the random colors
for (int b = 10; b <= 290; b += 10)
g.drawLine(420,b,800,b);
}

but I do not know how to get the colors randomUse the Random class.

[SOLVED] mplayer not keeping mkv aspect ratios

When playing MKVs which have Display Width/Height defined, it appears the Movie-Aspect is never being set. Here's sample console output:
mplayer movie.mkv
-snip-
[mkv] |+ segment information...
[mkv] | + timecode scale: 1000000
[mkv] | + duration: 6894.848s
[mkv] |+ segment tracks...
[mkv] | + a track...
[mkv] | + Track number: 1
[mkv] | + Track type: Video
[mkv] | + Default flag: 1
[mkv] | + Codec ID: V_MPEG4/ISO/AVC
[mkv] | + CodecPrivate, length 40
[mkv] | + Default duration: 41.708ms ( = 23.976 fps)
[mkv] | + Language: und
[mkv] | + Name: -snip-
[mkv] | + Video track
[mkv] | + Pixel width: 704
[mkv] | + Pixel height: 480
[mkv] | + Display width: 852
[mkv] | + Display height: 480
-snip-
Starting playback...
Increasing filtered audio buffer size from 0 to 34816
[h264 @ 0xe26f60]no picture
[h264 @ 0xe26f60]no picture
[ffmpeg] aspect_ratio: 0.000000
VDec: vo config request - 704 x 480 (preferred colorspace: Planar YV12)
Trying filter chain: ass vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO Config (704x480->704x480,flags=0,'MPlayer',0x32315659)
REQ: flags=0x437 req=0x0
VO: [xv] 704x480 => 704x480 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <[email protected]> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 310 for hw scaling
*** [ass] Exporting mp_image_t, 704x480x12bpp YUV planar, 506880 bytes
*** [vo] Allocating mp_image_t, 704x480x12bpp YUV planar, 506880 bytes
-snip-
Any ideas as to what is happening? My ~/.mplayer/config contains the following:
# Write your default config options here!
[extension.mkv]
demuxer=mkv
sid=0
ass=yes
embeddedfonts=yes
fontconfig=yes
What gets me is that the Display Height and Display Width are clearly being detected by the demuxer--but it's as if that information isn't making it all the way down to when it starts playing. Thoughts?
EDIT: I should also mention that without the demuxer being set to mkv, I still don't get the AR preserved.
Last edited by skystrife (2010-11-08 23:45:20)

There was a bug in mplayer for a short time. It's possible the current mplayer in Arch is exactly that buggy version. Try mplayer-svn from AUR.

Value in new depreciation area is Zero

Hello All,
I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run AFBN for opening the new depreciation area.
In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value. But earlier when I did the testing in quality the transaction type was 310 for both the areas.
In AFBN, the check box Leave initial value was unchecked initially and when I ran it again I result was processed 0 and error 0. I reversed one asset and transferred to new asset class containing both depreciation area again. But again the value in depreciation area 11 is Nil.
Please help.
Thanks,
Sangram

Hi Sangram
Since you are already executed AFBN with the option "Leave initial values", you cannot update the records now, as the table entries have already would have got created in tables ANLB,ANLC, etc.
Now if you want to copy values from other depreicaiton areas to new dep area, one option is to copy a ZZZAFANEW1 by doing a small modification (that is by changing all ABAP commands INSERT to UPDATE) and execute this program. This will update the values from the source depreciation area to target depreciation area, even if table record already exists.
This code is available in SAP note no.317806
Test it thoroughly before using it in Production client. Also take care to enter a correct source and target depreciation area to avoid further problems.
Hope this helps.
Regards

Zyxel nsa 310 for os 10.4.11

Similar Messages

Maybe you are looking for