Activating PCA in NEW GL

Hello Folks,
We are putting ECC with NEW GL from scratch, and will be using Profit Center as Main Driver for reporting. Will activating FIN_PCA and Document Split be sufficient, or we also need to activate classic PCA in Controlling as well, what advantage will that give to us, or its that we are safe not to do it.
Thanks
Balla

No you shall not activate PCA when running the New G/L. The PCA tables GLPCT and GLPCA for example will not be populated with transactional data. However you will continue to use some of the PCA menu items like creating master data.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Similar Messages

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not ope

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.

Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

I moved Creative Suite 5 to a new computer, deactivated on the old, activated on the new, but only Illustrator and Photoshop will open. The rest of the suite will not open. How do I fix this?

I moved Creative Suite 5 from my old MacBook Pro to my new MacBook Air and followed the instructions for deactivating on the old and activating on the new but only Photoshop and Illustrator will work. I need to also access InDesign, Acrobat, Dreamweaver and Fireworks. Is there a way to fix this? Problem with the MacBook Air is that is doesn't have a disc drive so I had to transfer via external hard drive.
Cheers.

The problem is that you need to install CS5 from an installation file or installation disc. You can't just copy files because there are lots of supplementary files that don't get put in the right location.
You'll need to use the Adobe Cleaner to remove all the stuff on your new computer:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer for CS5:
Other downloads

Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new l

Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new laptop.

Make sure you are using the correct serial number. Find your serial number quickly
If you did not deactivate the original installation then it is possible your two allowed activations have been used and you need to reset your activation count. To do that you need to contact Adobe Support thru chat and ask them to reset your activations. If you ask for more than that they will tell you they cannot offer you any support.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

From Classic PCA to New PCA

Dear friends,
I am on upgrade project from 4.7 to ECC6.
my clients wants to use PCA with new Gl. Now they don't want to use classic PCA.
Please suggest me what steps I need to take. Tell me the detail procedure.
Please let me know what are the implication of this.
Thanks & regards,
Reva.

Thanks you all for your prompt response.
But i am confuse little bit on profit center heirarchy.
My client has classic PCA heirarchy. what should I do with that. Should I use same heirarchy for new PCA or I have to create new PCA heirarchy.
if anyone have the config doc for new PCA, please send to me on [email protected]
Thanks & Regards,
Reva.

HT201365 How can the iMessages and FaceTime be activated with this new ISO 7 update? When I enter my Apple ID & password it won't do anything. Says waiting for activation!! Help!

How can the iMessages and FaceTime be activated with this new ISO 7 update? When I enter my Apple ID & password it won't do anything. Says waiting for activation!! Help!

Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
-Griff W.

HT201269 Gave my iPhone 4 away to someone w/ a 3GS, so how does service get activated on the new device? All docs transferred already via iCloud.

Gave my iPhone 4 away to someone w/ a 3GS, so how does service get activated on the new device? All docs transferred already via iCloud.

That person needs to contact their cellular carrier.

I am trying to activated a brand new iPhone 4s but the serial number isn't working. Suggestions?

I am trying to activated a brand new iPhone 4s but the serial number isn't working. Suggestions?

Are you getting any error message or other data that helps to understand why the SR # is not working? Sometimes when entering a serial number a letter or number is entered incorrectly because a 1 looks like an l or an s looks like a 5. Make certain that this type of an entry error is not your problem.

DSO activation: Data in new data table but missing in active data table?

we use an end routine in transformation to populate a data field in DSO.
it works as we can see the value populated in new data table.
when we activate (activation) DSO, we see the value is deleted from this data field.
why?
this data field is set as an characteristic info obj in the data field portion of the DSO.
we are using 2004s, I forget to check the SP level.
George

good job ,thanks for the update and good luck.
I saw it late on this, else i never miss OSS notes
Chetan
@CP..

Activation Problems with new Razor

My original razor is worn out and limping on it's broke leg and my last nerve. I bought a Motorola K1m KRZR off eBay to activate while I'm still under my upgrade time.
I went to the Verizon wireless web site, logged in, put the new phones ESN in and it accepted the info. Turned old one off and new one on and dialed *228. Nothing, nothing, nothing but failures to activate. Called 800-992-0204 only it's after 11 so, nothing but voice prompts telling me to do the same thing the web site told me to do. So, I went back to the web site and this time instead of the ESN I put the MEID. The web form looks like it want's both with a / between them but there isn't enough characters in the form to fit it all. So I submitted only the MEID. Same results. Web site accepted the number and said turn the old one off and active new phone with *228. Nothing, nothing, nothing but more failures to activate.
Has any else had this problem during activation? If so, what did you do? Wait to talk to a Rep. during normal business hours? They should have a tech team there 24/7. Of course if they did that I'd be talking to someone in India who I can't understand. I can fake a great Indian accent but I can't understand one.
Help.

Hi,
One possibility could be that the phone is on a Lost/Stolen list, or a NonPay list, this would prevent the activation from completing. This can happen especially when buying from a third party.
Usually when you see both an ESN and MEID you'll want to use the MEID. Only enter in the numbers, no extra symbols. So it sounds like you definitely did it correctly. It's most likely something in the billing system that's preventing it.
Do you have any pending orders for a plan or feature change?
When calling *228 do you maintain at least 2-4 bars of signal?
Otherwise, you can call Tech support, but they usually don't change phones unless it's an emergency. I guess it would vary by case. And you would most certainly NOT speak to anyone in India. VZW does not outsource their calls outside of the country. You may get someone of a different ethnicity, but they won't be outside the country. =)
Good luck!

Why when I try to Build === Configuration Manager === Active solution platform === New does not open up a platform configuration window???

I have read that in order to process my .xlsx file using Microsoft.Jet.OLEDB.4.0 Connection String I need to create a "x86" Active Solution Platform.
Welllll, when I <Right-Click> on my Solution in Microsoft Visual Studio, and <Click> on
Configuration Manager and then <Click> the Active solution platform
and choose <New...> absolutely nothing happens. How can I try and create a new
Active solution platform if nothing happens and I don't get a dialog box or window?
Am I doing something wrong here?
Do I have a Setting that is incorrect?
Thanks for your review and am hopeful for a reply.
ITBobbyP85

Hi ITBobbyP85,
After testing the issue in my SSIS project, I also couldn’t add a new Active solution platform in the SSIS project.
As per my understanding, I think the Active solution platform doesn’t supported in Business Intelligence projects (SSAS, SSRS and SSIS). If the project is application project(C#, VB, etc.), by default, the target platform is x86. And we can also configure
the project to target to a 64-bit platform. For more details about how to configure projects to target platforms, please see:
http://msdn.microsoft.com/en-IN/library/ms185328.aspx
The following screenshots are for your references:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Same Photoshop CS2 activation issue with new installer also.

Dear Adobe support team, we have downloaded the Photoshop cs2 from the link http://www.adobe.com/downloads/cs2_downloads/index.html. As per your suggestion I un-installed the older version and installed new version and tried to activate the product. But I have failed to activate as per your instruction. I want to get rid of activation message. Kindly also let us know what all do we have to un-install before the fresh installation.

Thanks for your support.
We are able to active CS2 in administration login. Now there is no activation message.
Now there is a different message window popping up. Every time I launch Photoshop CS2, the adobe updater message is popping up. I am not able to take screen shot of the window. We tried deactivating this in msconfig options but no success.

Photoshop activation on a new computer.

I own Photoshop CS. Yeah, yeah, I know, it's old. But I bought it. Actually paid for it. During a time when everyone seemed to have a copy of one version or another (in pirated form), I actually went out, and paid for it. My wife and I were at a convention in Las Vegas, and we purchased it directly from Adobe, at their display in a huge convention building with painted dancing girls, whole football fields set up for the purpose of showing how green Fuji photos could make grass look, and small airplanes were flying around... Really. Anyway, we bought it, from a gal in a giant rotating tower of people working with Photoshop, showing on a myriad of screens all the wonders they were creating with this revolutionary product...
We went home, loaded that bad boy on our computer, and entered the world of the digital darkroom. Yesterday, I bought a new computer, with the sole purpose being to provide the memory-hungry Photoshop program an amount of memory it might be satisfied with. Quad-core processor, 750 GB hard drive, and 8 gigs of RAM. To some, a pretty powerful computer. Today, anyway.
I loaded the software, and got the usual "Activation within a month or you can't use it" message. I tried, limbering up my fingers to enter the mile-long serial number on the back of my ancient jewel case. It said "Sorry, activation not available, call this number for activation". So, dutifully, I did as instructed. This time, I was required to enter said mile-long number on my phone, always fun, tiny touch screen button... gotta love 'em. Then, it gave me a number to enter back into the computer to complete the process. I did that, and then, it said "Sorry, we no longer do activation by phone. Go to this web site: www.Adobe.com.go.activate" Went there, and was told to chat with a live representative. I did that, and was told "your only option is the $19.99/mo subscription". Um, the what? I paid $550 bucks for this program, and now, years later, if i want to keep using it, you want me to pay you twenty bucks a month, forever? Not for tech support. Not for upgrades. Just because you want some more money. Is that right? Seriously??
Am I the only one who thinks this is crazy? Is this even LEGAL???? Is there any way to make Photoshop just turn off the activation thing, and leave me alone? All I want to do is use what I bought and paid for. It's like buying a car, and ten years later, the car company says , "Hey if you want to keep driving this car, you'll have to send us monthly payments, or it won't run anymore".
Help...?

Charles stebbins I would recommend contacting our support team directly to verify the serial number was never registered. You can contact our support team at Contact Customer Care. An Adobe ID was required to activate the software so it is likely that the serial number was registered under a particular e-mail address. You can request that your account be searched for by e-mail address and/or phone number.

PCA in New G/L

Hello Guys,
As I had read in documentation, the new g/l functionality has now the PCA functionality. What I couldn't find is configuration documentation for the PCA in G/L.
Can someone give me some light on this, in case you have some docuemantation would you be son kind in sending it to my email:
[email protected]
Thnks a lot.

Use the search option. I believe there any many threads with document splitting documentation.

Activating PCA in NEW GL

Similar Messages

Maybe you are looking for