Audio feedback in web-calls

When connecting Apple TV with AirPlay for conference call apps, the iPad sound-cancellation doesn't recognize that the sound from the Apple TV is its own. We use GoToTraining to have a conference call & when the person from the call speaks it comes through on the Apple TV sound. The iPad speakers pick it up as new sound, not from its own device, and mirror the audio into the Apple TV device creating a loop for that speaker.

It thinks the headphones are in (last time you used time and took them out it didn't register).
Press the volume keys on side up and down and if you see it saying it is the headphones or something else, that is the issue. Put in and out the headphones many times and check volume keys again with it out. Once you see it just say Ringer when the headphones are out, then it knows the jack is out.
This happens from dirt/lint in jack thus making bad contacts as it is pulled out (or messed up headphone jack that may not be making proper contact).

Similar Messages

Why do I hear very loud audio feedback in earpiece/headphones during a call?

There is quite a substantial amount of audio feedback from the microphone to the earpiece on my 4S during calls. The problem is much more noticeable when connecting headphones. Is this a hardware problem? Should I deman a new phone (it's a week old) or wait for a software update?

- Try another piar of headphones
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Audio Feedback through Speakers

Does anyone get audio feedback from their iPhone? I get feedback in my office, home and car speakers. Any recommendations on how to stop the feedback?

AT&T has what is called a GSM wireless network (the largest in the U.S.) along with T-Mobile vs a CDMA wireless network used by Verizon and Sprint in the U.S. to name two. You can't use a GSM cell phone on a CDMA wireless network and you can't use a CDMA cell phone on a GSM wireless network.
The iPhone is a GSM phone and GSM wireless networks dominate the overall worldwide market by a very significant margin.
GSM phones have a tendancy to do this when near speakers depending on the speakers.

Incoming audio on iphone 5s call is muffled and too low to hear

Just activated iphone 5s has an audio problem. Incoming calls audio is muffled and to low to hear.

Stop restoring the new phones from your backup, instead set up as a new device.

Audio feedback on quiz buttons

Is there any way to add audio feedback to an automatically generated quiz button when it has been clicked e,g the submit button, undo button etc?
I have put audio feedback on smart shape buttons via advanced actions but an advanced action cannot be assigned to the above buttons.
Failing that is there a way to make a smart shape button into a submit button?
Many thanks

The embedded objects in quiz slides, those who have no separate timelines, are different from normal interactive objects. There is no real difference between normal buttons and shape buttons as you seem to tell at all, just between embedded buttons that have specific functionality and the normal buttons. There is no way to replace a quiz button by a shape button at this moment, but that wouldn't change the way they act.
If you want audio, you can attach it to the feedback captions (Success, Failure) or put them in actions that are triggered by the Submit button: the Success and Last Attempt actions. More details:
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog

Correct audio compression for web playback.

I am making a webseries and I want to know what is the best audio compression for web playback.
I tried H.264, but the audio levels were much lower when I played it back outside of finalcut.
any advice?

this might help a little -
http://www.kenstone.net/fcphomepage/qt_movies_fromfcp.html
and
http://www.kenstone.net/fcphomepage/youtube_compressorgary.html

IC web - call list

Hello,
does anyone know why, in the IC Web - Call Lists, on the right it shows the BPs belong to that call list.
I select on 1 of the BPs and then i click on the Identify Account navigation bar. When i click on the "Confirm" button, i get the error msg "Customizing settings missing. Assign partner functions to PCAL". I am sure that i have assign the transcation PCAL to the BP so why am i getting this message.?
what have i missed out?

Hi,
Have you maintained the partner procedure containing this account as one of the partner functions to the PCAL.
See what will happen is when you are calling this BP and selecting on the account identification tab, you have assigned a account identification as Contact person of the call or sold to party, but have you assigned this same partner function to the transaction.
KIndly check that.
Hope this will work
Regards,
Rekha Dadwal
Kindly reward with points if useful!!!!

Problem with audio while making a call

I have a model 9810,
I can hear no audio while making a call at all, however, while making the call if I press the speaker tab I can hear (as like a hands free made)
I do not use a head set or in car kit, I just use it as a handset.
All other audio is OK, I can hear the alerts as a call or text comes in, but as soon as I answer the call and place it near my ear I hear nothing
Can someone please help
Thank you

Hello,
Questionz wrote:
I am having the exact same problem, I am not sure why, but my ear speaker is not working. I tried resetting, removing the battery, but nothing seems to be working.. Putting the call on speaker works, bluetooth works, only my ear speaker is not working.
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Questionz wrote:
I bought this from Blackberry store, is there any way I can give this in as warranty?
When you purchased, you should have received information as to how to seek support, warranty or otherwise.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Burned mov file of finished video as always but on playback there is a sudden loud audio feedback-type-buzz about a minute into program. Wisdom?

Burned mov file of finished video as always but on playback there is a sudden loud audio feedback-type-buzz about a minute into program. Wisdom?

Thanks for all your help and thorough answers. After trying several things
without success, I ultimately just rebooted the system and...bingo...the
problem went away. It was such an unusual problem that it just didn't occur
to me that it would be that simple. Sometimes it isn't. I appreciate your
working to help me deal with this.
Keith
On Wed, Aug 6, 2014 at 12:45 PM, Kevin Monahan <[email protected]>

Cannot start mwa audio streaming from web site

Dear all,
I found that i cannot open a wma audio streaming from web sit. Safari popup a error message that the mime audio type is not available. Although I've already installed flip4mac and Media Player 9, both Safari/Firefox cannot playing such audio stream. Is it a plug-ins issue and how can I to check and resolve this? Please help.
Eric

Jeremy Williams wrote:
> I am looking for a free, or not-so-free script or
Dreamweaver extention that
> will enable me to progressively stream mp3 music on my
web pages, but one that
> does not start playing unless you press a play button.
Also, it would be nice
> if it had other control buttons.
>
> If anyone is aware of anything like this, I sure would
appreciate it!
> Thank you in advance!!
>
This one is cool ($34):
http://www.coffeecup.com/web-jukebox/
(Warning, song starts playing when you browse there)
Bonnie
in California
8 ^ )

Minor bug: Smart Audio and voice/video call

Hi. There is a slight bug regarding the Smart Audio driver. Here's how to get the problem:
1. As we all know, the speakers for X220 isn't exactly loud. So I overcame this problem by going in Smart Audio and selected the custom preset for EQ, setting all the sliders to maximum.
2. Go have any kind of voice/video call, be it Skype or MSN. As Smart Audio senses a voice call, it sets the audio into VOIP mode.
3. Here's the problem. After you finished the voice call, the EQ settings doesn't go back into my previous setting (the custom preset), rather, it goes back to "Off", the default setting.
Thank you.

hey jamestan,
have you tried uninstalling the Smart Audio driver and then install the latest version which is available on our website?
If not, kindly do so.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Audio feedback for wrong answer in Sequence and Hot Spot Questions

I am having three issues:
Everytime I close the Quiz Manager after making some changes I get an error message saying I should Presenter has failed and I should resave and restart. See attached screenshot. I think this is also why I am having the two problems below.
I have uploaded the right audio response to use for an incorrect answer. But both my hot spot and sequence questions do not playback the feedback for the incorrect answer. The audio feedback for the correct answer works fine. I have allowed 20 attempts to answer the question.
I want the text for the correct and incorrect message to be the text in the audio feedback. So after I setup the questions I manually edited the Correct/Incorrect text boxes to be the text I want. But everytime I open and close the Quiz Manager, these refresh back to the default values of "Correct" and "Try again!". Is there any way to not allow such refereshing?
Any help is greatly appreciated.
Thanks!

What version of Presenter are you using? Have you tried applying any/all the updates?
1. Hard to say exactly what is wrong. This may need to be addressed by Support.
2. I believe that the incorrect feedback audio will only play on the final failed attempt (20th time in your case). This may need some testing to validate, if you change your number of attempts to two, and then answer it incorrectly twice, do you get the audio on the second failure?
3. This sounds like an issue from early versions of Presenter 7 (7.0.5 resolved this if I remember correctly), but if it is Presenter 9, support may need to know about it.

Audio Feedback or Echo

Hello,
Has anyone experienced an audio feedback or echo once playing back an audio taping/presentation? It seems there are two voice overs on the playback. I tried creating a new slide but get the same result. This was not a problem, in the beginning. Can you tell me how to resolve this problem. Thank you.

Hi - Try this:
Go to the Effects Tab
Audio Filters>Final Cut Pro and select the filter Expander/Noise Gate
Drag that filter on to the audio clip you wish to try and improve.
This filter works by making loud sounds louder and soft sounds quieter, so when you use it the background sounds and echos should be reduced.
You adjust it by double clicking on the clip which you applied it to, the clicking on the filters tab.
Adjust the filters effect by adjusting the Threshold control. I would nudge it up until it become objectionable.
This is processor intensive so you will probably need to render the clip after each adjustment to hear it play back.
Select the clip and hit Command -R.
Hope this helps.

Audio Feedback from Keys

For some reason I get audio feedback from any keyboard input while in Stickies. Only happens in stickies and Notes under the dashboad, as well.
It's not the keys themselves, it's actually coming from my powerbook, like a tiny tick sound, but definately not a mechanical sound; it's distinctively electronically generated.
It's hard to tell if it's coming from the speakers or not, and changing the system volume does nothing.
I've checked settings under Universal Access and every feature is off. There are no settings under Stickies or the Dashboard for any kind of audio feedback feature.
Weird.
Anyone else notice this?

Can you try an external microphone (connect via USB), and see if same issue occurs? If the problem persists, then you might want to check hp.com to see if there is a newer audio driver for your model.
"Appreicate a Kudo if you like my post or find it useful."

Audio feedback, continuous ringing tone.

elitebook 8650. have audio feedback. Only way to stop it now is to put a plug in the headphone jack. Otherwise is contuinuous.

I just uninstalled the IDT audio and stopped the feedback. Should I reinstall? Do I need IDT audio?
Thanks in advance for any help.

Audio feedback in web-calls

Similar Messages

Maybe you are looking for