Bypass Scenario-- Need help.

Hi Experts,
New to XI..
Iam doing a bypass scenario..
I got the IDoc-XML from source and i need to route it to SAP system.
There is no need of doing any design part for this scenario?
No need of doing any mapping to acheive this??
No need to import idoc from SAP ?
Because frnds are claiming that we can acheive this by doing only configuration part.. Adapters will take care of picking and posting this idoc-xml..
can i achieve this w/o doing Design part ?? If yes pls provide the brief steps how i can achieve this..
Thanks in advance..
Regards
Reddy.

it is possible to send a message without an IR. but ins this case as u wud req to post it to SAP, IR might be come into pciture. ways to post an idoc data to sap:
1. bapi
2. proxy
3. idoc
here all the above scenarios req mapping. hence i believe ur case wud req mapping.
once case where u can post the idoc xml to sap with IR is have it saved in applicatioon server as a file and then then using ALE config u can read the data to post to transaction.

Similar Messages

Multiple Source Messages Scenario - Need help

Hi,
This is my scenario.
System A sends Message A
System B sends message B
both of them are diffrent strcutures.
Now I need to map both of the messages to Message C and send it to system C.
I would need help on how to achive this requirement.
I tried using correlation in BPM but i dont know if I'm following the right approach to activate correlation.
Any help in this regard would be appreciated.
Cheers!!
Sidharth

Hi,
I've gone through the thread but did not find much information.
The blog talks about collecting messages for same interface which I'm afraid is not wht I'm looking for.
Just to summarize wht I've done....
Start --> Receive 1 (Message A) --> Receive 2 (Message B) --> Transformation --> Send 1 (Message C) --> Stop
I've defined correlation accordingly... to pick up the PO num field.
Now when message A is submitted the outbound status on sxmb_moni is set to waiting....
But the moment I submit message B, The outbound status is set to a Green Flag and there is a SYSFAIL entry in the queue.
The error is " Permanent Error in BPE Inbound Processing"
But I see the message A is has still got the outbound status wating..
I guess I'm missing something in correlation..
cheers!!
Sidharth

XI Realtime scenarios-need help

Hello experts,
I am new to XI and I need help with real time XI scenarios.
can you please give me 2-3 examples of What kinds of systems involve in data transfer (both sap and non sap) for transfer of what kinds of data (general IDOCs, RFCs and other kinds of data)
and what is the purpose of that scenario? also how many times the data will be transferred between the systems?
Thanks in advance,
Haritha.
useful answers will be rewarded ***

Hi Haritha,
Hi,
Please go through the following are the links.
Maybe this is a good start:
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm>
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
<https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]>
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm>
Further, this thread deals with everything that is needed for a starter
on XI. Do check them out,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
/message/527697#527697 [original link is broken]
</message/527697#527697 [original link is broken]>
And after you are done with the documentation probably you can go
through this scenario,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
Also check the following threads which might help you a little more,
Learning XI
<Learning XI>
XI 3.0 Training
<XI 3.0 Training>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
<https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db>
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
</people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i>
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
</people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii>
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
</people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii>
and once you are through ...follow the following links to weblogs which
explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic
scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
</people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters> - IDoc to
File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
</people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy> - ABAP
Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
</people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30> - File to
JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
</people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy> - File to
ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
</people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1> - File to
File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
</people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2> - File to
File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
</people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping> - Any flat
file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
</people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit> - File to
RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - File to
Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
</people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i> - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
</people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii> - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
</people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address> - Dynamic
Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
</people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi> - Message
Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
</people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm> - Walk
through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
</people/siva.maranani/blog/2005/05/22/schedule-your-bpm> - Schedule
BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
</people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi> - Use of
Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - Use of
Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally
</people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally> - Maintain
RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u
</people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u> -
Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
</people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party> - Handling
different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
</people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi> - Modeling Integration
Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
</people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible> - Testing
of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
</people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects> -
Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm>
- Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step> - Alert
Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide> - Trouble
shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
</people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi> - Call
UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
</people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi> -
Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
</people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping> - Using
ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
</people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure> - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
</people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm> -
Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces
</people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces> -
Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
</people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14> - The same
filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
</people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine> - Payload
Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
</people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i> - XI :
Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
</people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter> - XI: HTML
e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated
</people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated> - XI :
FAQ's Provided by SAP
Books from SAP PRESS...add this link to your favourites...
http://www.sap-press.de/international?GalileoSession=97477303A3.xx-M0Y78
Real World Scenarios of SAP XI ...VERY VERY GOOD....AWESOME
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/0
b95b488-0701-0010-57b9-e861b1ad572f
Check this up:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] (how to guides)
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)
Here is some scenarios from SDN:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by
SAP
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI
Please give reward points if it is useful.
Regards,
Sai.

Sales Quotation Scenario - need help

Hi,
I need help in fulfilling my client requirement.
Once quotation is created it should be in the blocked stage.
Once the sales manager changes the quantity it should not allowed to change the quantity and only Marketing director can change the quantity.
After Marketing director changes and finalizes the quantity in the quotation the item lines in the quotation either need to be greyed out or should not be editable but should allow to add items in the same quotation.
Now Sales order should be able to be created referring this quotation.
Please let me how can we achieve this functionality either by standard SAP or by ABAP development.
Thanks
Venkata Rama Reddy

Once quotation is created it should be in the blocked stage.
Once the sales manager changes the quantity it should not allowed to change the quantity and only Marketing director can change the quantity.
- To disable the qtty in Quotation Creation-VA21 ( either use the SHDB-Transaction Variant, Make the order qtty- display mode/ maintian this order qtty )
+NOTE: incompletion procedure-line item level- remove "order qtty" for quotaiton or else system will not allow to save the Quotation ( or else you save the Incomplete document)
- Use BS02- Status profile- maintian sales manager / Marketing director - as status No.
- Business transaction in the status profile _ maintain the object " Create Order" - objectionable against the status no. & last colum is Authorization code- assign respective profile here & maintain the same in respective Username- for authorizations.
After Marketing director changes and finalizes the quantity in the quotation the item lines in the quotation either need to be greyed out or should not be editable but should allow to add items in the same quotation.
Now Sales order should be able to be created referring this quotation.
HOpe it helps

Mail Adapter Scenario ----- Need help

Hi All
Again with same mail adapter scenarios .
I am trying to send my e-mail on Microsoft Exchange server to a FTP server .
So flow is like Mail system->XI-> File system.
While configuring sender mail adapter , i gave the following URL imap://S4DE8PSAANH.ibm.com/InBox as i am using IMAp4 as the protocol.
Now i have set of doubts and questions for which i need input from you all
a>I am still seeing my sender communication channel with green light (running ), its not picking up any new mail i came to my inbox. Any reasons why it did not pick up ?
b> Now to set up Receiver Determination and Interface Determination , i need to have inbound interface created, but here when my requirenent is just to send a e-mail content as XML to fle system , what interface should i use or how should i create a interface with interface mapping or message mapping ?
c>Any idea whether just configuring a sender mail adapter with certain poll interval will result in a XML message that can be seen in SXMB_MONI txn ? Or do i need to fullly set up my receiver system and complete whole configuration of the entire flow.
My intent is just to get a simple mail body into XI , how do i achieve it ?
I gave URL as imap://S4DE8PSAANH.ibm.com/InBox , still i did not get any XML message in SXMB_MONI txn ..or should i give IP address of my exchange server instead of S4DE8PSAANH.ibm.com ? ...
Can we see a XML message if only a sender communication channel is set up with no receiver ? .. I am just wondering why new mail in my inbox is not getting picked up into XI.
Thanks a lot to all who helped to me earlier , i guess i rewarded points to all those who guided me : -) and will do same again as promised.
Please help .
Thanks and Regards
rohan

Hi Rohan -
Here's what I can tell you:
- if the hostname is wrong, you'll get a 'UnknownHostException'.
- if the path (e.g. Inbox) is wrong or doesn't exist, you'll get a 'IOException... The requested item could not be found'.
- if you don't configure user authentication, you'll get a 'NullPointerException'.
This is all within Adapter Monitor - so since your mail CC status is green, we can only assume that your mail host is valid, your path is valid, and your user id/pwd is valid.
One thing to try, since 'Inbox' is common to any mailbox, try creating a new folder at the Inbox level (e.g. called 'Test1') and specify the URL as:
imap://S4DE8PSAANH.ibm.com/Test1
and see if your CC status is still green in the Adapter Monitor (make sure to look at the ID Cache Notifications and the timestamp in the adapter monitor).
Outside of this, SP9 is relatively old. You should patch your XI system as soon as you get a chance - with or without this problem.
Regards,
Jin

Strange scenario - need help

I have Skype on my Windows 8.1 laptop and on my Android tablet
When I use the tablet for skype everything works great - except I am unable to create group calls which is absolutely eseential for my work.
Therefore when I need to do group calls, I either get someone else to create the group or I try to use skype on the laptop.
However this is when the problems start.
Two common people I talk with are CJ and NT.
CJ uses Skype on a Mac Laptop.
NT uses skype on a Windows 8.1 laptop.
* If I have a call with CJ on the tablet, everything works 100% fine
* If I have a call with NT on the tablet, everything works 100% fine
* If I have a call with CJ on the laptop, his sounds randomly cuts out (usually in 3-5 seconds blocks, maybe every 5-10 minutes)
* If I have a call with NT on the latop, everything works 100% fine
So...
* I thought the problem was with my audio output - but I never have the problem with NT?
* I thought the problem was with CJs microphone - but I never have a problem when I talk with him on the tablet?
I've tried...
* Ehanced audio / non-enhanced audio
* Re-install drivers
* Headset / no headset
It's really frustrating! Now my tablet is basically stuck as my skype phone however this means I cant do group calls which I really need.
Please, anyone, help me solve this dilemna!
I use skype every day.

I've delved further into this testing am starting to see a trend...
Other contacts of mine CC and HK are boths Mac users and they have similar problems to CJ mentioned above when on the laptop but never on the tablet.
Meanwhile another contact AT is a windows user and they never have problems on both the tablet and the laptop.
Therefore, the trend so far is that if I talk to a Mac User on my Windows 8.1 laptop I have audio problems, meanwhile every other scenario works fine!!
P.S. These are regular contacts of mine which I NEVER had any problem on my Windows 7 laptop... wish I still had that laptop to re-test but I gave it away...

Inventory Managment Scenario - Need help

Hi,
I have following Scenario,
On BW Side:
1) Data is loaded once from DataSource 2LIS_03_BX in Cube1.
2) Data is loaded from DataSource 2LIS_03_BF in Cube1 using 'Initialize Delta Process'.
3) Data is loaded from DataSource 2LIS_03_UM in Cube1 using 'Initialize Delta Process'.
4) Data is loading every week from DataSource 2LIS_03_BF in Cube1 using 'Delta Update'.
5) Data is loading every week from DataSource 2LIS_03_UM in Cube1 using 'Delta Update'.
On R/3 Side:
Outbound Queue MCEX03 (LBWQ) is filling correct and Delta queue (RSA7) for DataSources 2LIS_03_BF und 2LIS_03_UM contains delta data correctly.
So Cube1 is filling correctly und Query on Cube1 is working also correctly.
NOW, we have a new InfoCube (Cube2) which should filled the data from same DataSources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM (same R/3-System) from now onwards.
So,
I have to fill the Setup table for 2LIS_03_BX on R/3-Side, to load Current Stock (opening balance) once in Cube2. Later the delta data from DataSources 2LIS_03_BF und 2LIS_03_UM will be loaded simultaneously in both InfoCube (Cube1 and Cube 2). In RSA3, 2LIS_03_BX contains right now no data!
Question:
When I can fill the Setup table for 2LIS_03_BX on R/3-Side? Or when is the appropriate time to fill the Setup table for 2LIS_03_BX on R/3-Side? Outbound Queue MCEX03 (LBWQ) and Delta queue (RSA7) for DataSources 2LIS_03_BF und 2LIS_03_UM must be empty when I fill the Setup table for 2LIS_03_BX on R/3-Side?? No material postings must be carried out during the process (filling the Setup table for 2LIS_03_BX)?? Any useful suggestion??
Thanks for the answer
Moha

Hi Moha,
Question:
When I can fill the Setup table for 2LIS_03_BX on R/3-Side? Or when is the appropriate time to fill the Setup table for 2LIS_03_BX on R/3-Side? Outbound Queue MCEX03 (LBWQ) and Delta queue (RSA7) for DataSources 2LIS_03_BF und 2LIS_03_UM must be empty when I fill the Setup table for 2LIS_03_BX on R/3-Side?? No material postings must be carried out during the process (filling the Setup table for 2LIS_03_BX)?? Any useful suggestion??
--> You are loading directly to cube from 2lis_03_BX/UM/BF datasources. So update queue should be empty at time of setup. For that system(R/3) should be locked for postings.
--> And also SETUP takes lot of time.
--> <i><b>You can try this: I think you already have data in BW.</b></i>
--> Stop V3 job(to pull data update queue to delta queue)
--> Pull remaining detla into BW(CUBE1).
--> Now delete initialization and re -Initialize datasources for both cubes(CUBE1 and CUBE2).
--> Push Historic data from CUBE1 to CUBE2 by creating export datasource on CUBE1.
No need of setup, No need of system downtime.
--> Continue delta's to both cubes.
Hope it Helps
Srini

File to Mail Scenario - Need help

Hi all,
I am trying a simple file to mail scenario in which i am using following data types .
Source datatype -
Scr_File_DT
-- Root
Material_no
Plant
Target datatype -
Tgt_Mail_DT
--Content
In the message mapping i am concatenating material_no and plant and mapping it to content.
The receiver mail adapter parameters are as follows -
Transport protocol - SMTP
Message Protocol - XIPAYLOAD
URL: smtp://gmail.com
Configure User Authentication: X (Check box is selected)
Authentication Method: Plain (from drop-down box)
User: [email protected]
Password: ****
from: mail address
to: mail address
subject : test mail.
Just wanted to confirm whether these settings are correct or not? Because i am not getting the mail in my mailbox.
Can anyone please help me on this.
Also are there any other settings required for using mail adapter ?
Thanks.

Hi,
you should add your email address to your user,add specific users list add you r user in alrtcatdef.
generally you should maitain the email data type format like
subject,from,to,content-type..
se below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Regards
Chilla..

WM:Picking Scenario - Need Help

Hi,
The scenario is, we got a sales order for 25 cases and delivery created for 25 cases. As per material master, 1 Pal=10 Cas.
So in the WM transfer order, it should pick 2 pal from the regluar storage bin search and remaining partial qty [5 cas] from a seprate stoage bin which has all the loose cases or broken pallets.
And if the partial cases strorage bin runs out of stock, how can we replenish that stroage bin?
CAN SOME ONE PLEASE PROVID ETHE PROCESS FLOW FOR THE ABOVE SCENARIO IN SAP? AND HOW IT CAN BE CONFIGURED?
Thanks,
Sen

Hello Sen,
Use appropriate picking streatagy for the same.
You have two option
Strategy M: According to Quantity
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f845bb4afa11d182b90000e829fbfe/content.htm
Strategy M: Partial quantity first
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f845ae4afa11d182b90000e829fbfe/content.htm
Now check out, which is most applicable for you.
Hope this helps.
regards
Arif Mansuri

HTTP to RFC scenario---- need help

HI,
I am trying to send the pay load through the Runtime workbench - > Adapter Engine -> Test Message, on pressing the send message it says that message is send but I cannot see the message in XI.
I have done the following steps:-
1) Check the string where message is to be send, I am getting the following message which mean the sending is correct.
<messtext>MessagingServlet is active.</messtext>
Can someone tell me why i am not able to see the message in XI ?

>>Runtime workbench - > Adapter Engine -> Test Message
use the following
Runtime workbench - > Integration Engine -> Test Message.
once message has been send you will see it in sxmb_moni and then you can monitor in the receiver communication channel as well
Thanx
Aamir

Need help for asynchr. scenario between 4.6c and XI

Hi,
I need some help with this. We are running 4.6c and now I need to talk to XI 3.0 asynchronously.
I have a situation where I need to send data to an external application.
So: R/3(4.6c) -> XI -> external application (the application is not in our landscape).
It's not required for now to get an answer back from the external application so what are my options?
I want to build my solution around that I will eventually get a response back to be real time but
for now, the FTP adapter should work fine. PCK will be implimented in the future to make it real time.
Just for a test, I tried:
R/3 -- (RFC Adapter) --> XI --> File adapter ... but it's crashing in R/3 since R/3 is expecting
a response back. If I setup two receivers in XI (one being R/3 and the other the file adapter, then it's crashing in XI saying since I cannot have two receivers for a synchronist request.)
I was looking to use an ABAP proxy but from what I'm reading, it cannot be used in 4.6c.
So what are my options? Is it only trough an IDoc that I can communicate out of R/3 to XI if my request don't required a response back?
Thanks
Yves

Hi Yves.
For a 4.6 R/3 system the only possible options are the RFC adapter and the Idoc adapter.
The Idoc adapter is used for async processing (no reponse)
The RFC adapter is used for sync processeing (and will therefore always expect a respons message)
The File adapter also onlu supports async (no response) processing.
There are two ways to solve your problem:
1. Create a Idoc to file scenario
2. Use the sync to async bridge
On help.sap.com you can fing documentation on this scenario:
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm
Best regards,
Alwin

I need help to activate my iphone 5s. am stuck on the activation page. can someone help with with the icloud activation bypass? how do i even go about it?

i need help to activate my iphone 5s. am stuck on the activation page. can someone help with with the icloud activation bypass? how do i even go about it?

You must put in the required information. If you do not have it, you must get it from the original owner of the phone. If you have forgotten your iCloud password, you can reset it at:
https://iforgot.apple.com/password/verify/appleid
There is no such thing as an activation "bypass". Activation Lock is a security feature. It wouldn't be that secure is you could bypass it, wouldn't it?

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Had this weird issue...Need help!!!

I got this issue, where user was not able to apply leaves on HR portal, which he was able to apply in past.
We did our analysis and found some roles were end dated by background job.
We extended the validity of the roles which were end dated, but he was still not able to apply for leaves.
Then I was suggested to remove the roles of users and assign them back and it worked.
Not sure why and how it got resolved....need help in understanding what happened here
Any response will be highly appreciated
Regards
Anshul

Then we can only speculate.
A possible speculation is buffering and some non-authorization attributes attached to the role, such as personalization keys. Some selects wait for the buffers to roll, others bypass buffering when selecting data which might have changed. This would mean that it was just timing that SU01 seemed to work, or SU01 triggered the bypassing of the buffer after the change but PFCG did not.
Anyway, as long as it worked in the end... :-)
Cheers,
Julius

Need help in formatting the Date - Date does not

Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PM

Your syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck!

Bypass Scenario-- Need help.

Similar Messages

Maybe you are looking for