CAN'T SEE BUSINESS AREA IN DISC DESKTOP

Hello,
I have recently created a new business area in discoverer administrator with user A. I have cheched under security and privleges and everthing seems to be as it should. After that I went to Desktop to create a new workbook, but when I would like to select items that will be in my workbook I don't see any business area...Is there any special reason?
Thanks for help,Peter
Message was edited by:
PeterSI

Hi Aparna
actually I was not. I thought that if i log with a user A he will be using his own EUL by default (I created the user and eul just before creating BA, then I logged to desktop after that with the same user). So in deskotp I went under tool to change EUL and it worked.
Thx and have a nice day,
Peter

Similar Messages

Can't see business areas in Discoverer user edition

I have setup a business area and folders in admin edition. But when I go to user edition I don't get the list in available business areas. The folders are set to 'visible to user'. What could be the reason.
Thanks in advance.
Alok

Each user much have (security) access to the business area,
and have the 'user edition' privledge.
Both of these settings can be found in the Administration Edition
under the Tools menu.
While you're there, you can review the settings for the Query Governor
as well.
Regards,
John Hagel

Cannot see Business areas in Admin (4.1.48)

Hi,
I have created a number of business areas in Discoverer Admin (4.1.48) and have granted them to users to use in desktop version.
This was working fine until today.
We had a refresh of the test environment yesterday and I was able to access the areas fine today until I created a new one - then all the pervious ones disappeared.
The strange thing is that I can still see all the previous ones in Desktop version. I have checked the security and privileges and all seem ok. and I am using the same log on for both
Anyone know what is going on?
Thanks
Michael

Russ,
I think that if is was a permissions problem then you wont see the business
areas in the desktop either.
Most likely that the desktop and admin uses different euls.
In Desktop go to help about menu to see the EUL used.
Do the same in discoverer desktop and compare the euls used.
Regards
Roelie Viviers

Not able to see business area in some fi doc

hi ,
In some FI doc for inventory g/l account in which direct posting is not allowed does not display business area however we can able to see business area in corresponding migo document . how to avoid this .
Thanks and Regards ,
Shikha

HI
Take that Inventory GL accont and open it in FS00 and check what field status used
And open that FS group in OBC4 then double click on Additional account assignments then make business area as optional entry and try
Thanks
Vishnu

How can I make Business area field optional in MIRO

Hi,
whyle posting invoice the system is asking business area as required input.
I don't want to put business area.
Is there any way to avoid this ?
I don't want to change, spro settings.
How can I avoid business area in MIRO?
waiting for your input..
Thank you,
Marella.

check the GL accounts field status variant attached to the Invoice posting.
also check in PO whether u have the BA field filled up. in case u r using BA accounting then that value shld be there..... as u said u dont want to put BA as field in miro , that means u r not using BA thing... so u can always maintain all the FSV of GL for BA as optional/supressed...

I am not able to see the Business area in Discoverer desktop

Hi,
r
I am new to Discoverer
I have created a business area in EUL with user name and password as dewip/dewip in Discoverer administrator and now when I am logging in to Discoverer Desktop with the same user name and password to create workbook I am able to log in but I am not able to find the Business area in the Discoverer desktop.
After creating the business area do we need to do anything ( We don't even have save option to save also).
In Discoverer admin -> tools-> privilages I checked to see the privilages for this user ,but I could not see this user name(dewip) only.
Please help me ,its urgent.
Thanks,
gsr

Hi gsr
If you are working on Desktop and you change the default EUL but it doesn't stick this means that you don't have Admin rights over your machine.
In order to make these setting stick you need to have permission to update the system registry.
If you really cannot be given these rights then I suggest you ask you system admin to change the registry setting for you on your machine so that it reflects the correct EUL. You will find it here:
1. From the Start button, use Run | regedit
2. Open your registry to display HKEY_CURRENT_USER | Software | Oracle | Discoverer 10
3. Expand the folder called Database
4. Inside here you will see one set of settings that begin with AEUL and another with UEL. The format is like this:
AEUL_username_database and UEUL_username_database
5. You should see the name of the default EUL in the column called Data
6. Right-click on the setting you want to change and from the pop-up select Modify
7. Type the name of the EUL that Desktop should default to for that user in the database, making sure you type it in UPPERCASE
8. Click the OK button
9. Close the registry
When you now connect to Discoverer Desktop you should be in the correct EUL.
Note: this is only required if you don't have admin rights on your PC. If you do have admin rights then Discoverer will set this for itself.
By the way, if you or anyone reading this is unsure about manually editing your registry you should back it up first. Here are the steps:
To backup your registry, follow this workflow:
1. From your PC, click Start | Run
2. In the Run dialog box, type "regedit" and press the Enter key
3. The registry will now be displayed
4. From the registry menu bar, select Registry | Export Registry File
5. When the Export Registry File dialog box opens, give a name to the file you want the registry to be saved as
6. In Export Range, check "All" or "Selected Branch" - Selected Branch will export the current folder, so if you happen to have already navigated down tp the appropriate Discoverer Administrator folder you will be able to back it up
7. Click the Save button
8. Close the registry editor
To restore your registry, follow this workflow:
1. From your PC, click Start | Run
2. In the Run dialog box, type "regedit" and press the Enter key
3. The registry will now be displayed
4. From the registry menu bar, select Registry | Import Registry File
5. Navigate to the folder in which your registry is saved and locate the file
6. Click the Open button - the registry will be restored
7. Close the registry editor
Best wishes
Michael

Can't see TimeCapsule from Laptop, only desktop!?

Hy, I would realy appreciate some help with my problem!
After updating the airpot software and the firmware software, I'm unable to see the Time Capsule HD from my laptop. I had the same problem with my desktop, and after installing the old version of airpot and firmware software I started to see the HD Time Capsule again. I tried to install the same version of the airport(5.3.2) in my laptop, but I still can't see the time capsule hd from my laptop, only from desktop. I'm using the 7.3.2 firmware in my capsule. I lost the entire day uninstalling and installing all the possible version of software and I could only make my desktop work with airport 5.3.2 and firmware 7.3.2, but the same combination in the laptop is not allowing me to see the HD of the time capsule. I've already tried wireless and cable for installing and truing to locate the HD. I can not find this steps in my computer " In Finder go to preferences and check connected servers to show on desktop" . Can you please help me? Thanks a lot for you time and attention!

Hello Placido and welcome to the discussions!
"I can not find this steps in my computer In Finder go to preferences and check connected servers to show on desktop"
Here are the steps:
Click on the Finder icon on the dock at the bottom of the screen. The Finder icon is usually on the far left of the dock unless you have moved it. Or, just click the desktop in a blank area.
Now at the top of the screen, you will see the Apple icon and Finder-File-Edit-View-Go-Window-Help. Click on Finder and then click on Preferences.
Click on General. Look for the words "Show these items on the Desktop"
Make sure that there is a check mark next to "Connected servers".
That is it.

GB e-filing - can't see business systems

We are trying to implement GB e-filing using XI.
Our 4.6C R/3 system is shortly to be upgraded to ECC 6.0 so we are moving from Business Connector to XI.
The XI system is installed and appears to be running OK. It is the latest version with the latest patches.
We have a central SLD on our Solution Manager System (v 4.0)
The XI machine and our QA (upgraded to ECC 6) are in a landscape in the SLD.
We have got a good way through the e-filing document at
http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
but have got stuck at Stage 6 [A] 3. 2. which says
2. On the Tab Business System Services for A2A, use the F4 help and select the business system on which the SAP HR component 6.00 resides in your system landscape
We can't see any systems.
Any idea what needs to be done to see our ERP system?

Hello Prakhar
Thanks for advice, really useful!
Can you please clarify where exactly I can create the Busines Transactions, such as Norman Correction?
I would like to create Normal Correction via SOLMAN_WORCENTER,so I navigated to Change Management > Common Tasks > New Request for Change (for instance)
After that I'm getting the list of various roles, such as:
Select a business role: AIC_MANAGER-AIC Manager
IC_AIC_AGENT-Accounting IC Agent
AUT-PM-Automotive Partner Manager
CASEWORKER-Case Worker (Social Services)
.....etc..
and I don't know which one to use.
Can I still use "old-fashioned" CRM transactions for this?
It all has been changed dramatically if you compare it with 7.0
Thanks,
123
Edited by: SOLMAN123 on Nov 23, 2011 7:11 PM

CAN NOT IMPORT BUSINESS AREA AS IT SAYS - JOINS NOT FOUND WHERE REQUIRED

We have recently migrated from Disco 4.1.48.08 to 10.1.2
Everything looks ok - we are able to look at existing workbooks and business areas. And we can export business areas successfully.
However
When we try to import some business areas it returns - JOINS NOT FOUND WHERE REQUIRED and fails. This is now causing a problem with how we promote from our test/uat and prod environments.
any ideas ?

Here's some information from Support that helped me...
Discoverer has many options on exporting and importing objects. Entire End User Layers, Entire Business Areas or only selected objects could be exported. To simplify the process of exporting and importing Business Areas, it is suggested that the export and import process should be done with entire Business Areas. The reason why it is not recommended that selected objects are exported and imported as a norm is to simplify maintenance.
It is still possible to export and import selected objects, but a knowledgeable Administrator is recommended to head the procedure. The process could get
very complex and difficult to manage.
Some Additional Notes:
- Join conditions are exported, but are not indicated as an object. Join conditions are only exported ** if ** the joining folders are exported.
- If the ‘refresh’ option is performed in Discoverer Administrator on an object and the underlying object on the database is not available, the object is dropped from the EUL. It is of utmost importance that the objects exist on the underlying database before the ‘refresh’ option is executed.
- Functions and Workbooks are not exported when exporting an entire Business Area. Functions and Workbooks have to be exported separately.
The first bullet is what was giving me this error "JOINS NOT FOUND WHERE REQUIRED". I was unable to do a full export - another unrelated error, so I came up with an alternate solution. I created a new BA that only contained the standard folders that my two custom BA's referenced - by JOINS and inclusion in my complex folders. I exported all 3 and they imported into the new instance with no issue.
Jewell

Interactive Users Can't See Business Rules

We have business rules for interactive users in planning. We had to do a refresh on the planning application to includesome members into the planning outline (members added usingHAL). After that the interactive users can't see the business ruleswhich they could see earlier to the refresh. Can some one help me on this please. This is a criticalissue. 

Issue resolved.... The issue was using the wrong password toenable HBR while regenerating the HSPJSHome.Properties file.

Can't see hard drive icon on desktop

Just got my daughter a new MA 13" 2011...installing some software via the external superdrive when I realized that I can't see the HD icon on the desktop...am I missing something to make it visible? Other than that if functions properly...I can "see" it when installing software as it lets me choose it as an install destination....
Thanks,
Daryl

Activate the Finder, select Preferences from the Finder menu, click on the General icon in the toolbar, check the boxes for what you want displayed on the Desktop. You can do the same thing for the sidebar by clicking on the Sidebar icon in the toolbar.

I can not see my whole screen on desktop it gets cut off

I can not see my whole desktop screen and I have to scroll to get to buttons such as file. Help

This normally happens when you accidently hit the Control key while scrolling. Hold the control key down and scroll with your mouse or trackpad. One direction will zoom and the other will unzoom.

I can't see the folders on my desktop

hi All, has anyone had this problem. i'm able to turn on my computer, but i get the spinning beach ball of death and i can't see any of my folders on my desktop!

Do you see anything on the TV?
If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
~Lyssa

Need advice.Can't see Business Transactions in CRMD_ORDER after 7.1 upgrade

Hello Experts,
We've done 7.1 upgrade and somehow now I can't see all our Business Transactions in CRMD_ORDER.
I executed TCode CRMD_ORDER > went to Business Transaction > Create > and I can see just few Business Transactions, not full list of them as in 7.0.
Now I can create only Business Activity, Outgoing E-Mail & Task. No option to create and see Change Order, Change Document, Corrections (Normal, Urgent, etc) etc.
Any idea why? Please advice.
Thanks
123
Edited by: SOLMAN123 on Nov 23, 2011 11:31 AM

Hello Prakhar
Thanks for advice, really useful!
Can you please clarify where exactly I can create the Busines Transactions, such as Norman Correction?
I would like to create Normal Correction via SOLMAN_WORCENTER,so I navigated to Change Management > Common Tasks > New Request for Change (for instance)
After that I'm getting the list of various roles, such as:
Select a business role: AIC_MANAGER-AIC Manager
IC_AIC_AGENT-Accounting IC Agent
AUT-PM-Automotive Partner Manager
CASEWORKER-Case Worker (Social Services)
.....etc..
and I don't know which one to use.
Can I still use "old-fashioned" CRM transactions for this?
It all has been changed dramatically if you compare it with 7.0
Thanks,
123
Edited by: SOLMAN123 on Nov 23, 2011 7:11 PM

Can't see flash drive icon on desktop

Why doesn't my Sandisk flash drive icon appear on my desktop when I insert it into my USB port? Thanks.

1. It needs more power than the USB port provides. Try plugging it into a powered hub or a port on the computer itself.
2. It is formatted with an incompatible file system. Check to see if you can select the drive in Disk Utility.
3. The Finder preferences for viewing disks are set to not show this type of device.
4. The file system is corrupted or the device is kaput.
bd

CAN'T SEE BUSINESS AREA IN DISC DESKTOP

Similar Messages

Maybe you are looking for