Configure purchase order screen

Dear Expert,
Is it possible to configure purchase order screen so that Supply Chain Planners (who create purchase orders) cannot amend the Pricing Conditions view and Net Price field?   Sceen dump attached.   However we want Purchasing Managers (who manage pricing conditions in the inforecords) to be able to change pricing conditions in the Purchase Order if required.
Please guide me step by step if there's a way.
Thanks

>
crystal142 wrote:
> Dear Expert,
>
> Is it possible to configure purchase order screen so that Supply Chain Planners (who create purchase orders) cannot amend the Pricing Conditions view and Net Price field?   Sceen dump attached.   However we want Purchasing Managers (who manage pricing conditions in the inforecords) to be able to change pricing conditions in the Purchase Order if required.
>
> Please guide me step by step if there's a way.
>
> Thanks
There is no standard technique for this. You can try the following method:
Create an enhancement (at the end) in the FM PRICING_SUBSCREEN_SET_DATA
The code can check various parameters like authorization or read a custom table to determine if the conditions need to be read-only.
Set the variable trtyp_i = 'A' to make it read-only.
Please make sure to check the COMM_HEAD_I-BSTYP = 'F' (for purchase orders) and 'L' (for scheduling agreements); else it may have undesirable effects, since the FM is called from SD as well.
Regards,
Aroop

Similar Messages

  • Disabling the cost distribution button on the Process Purchase Order Screen

    This is probably a simple question, but we have been unable to find the place to disable cost distribution on the SRM Process Purchase Order screen for limit orders ONLY.  Basically, we just want this functionality to not be available to users.  Can anyone direct us to the correct configuration for this?  Or do we need to edit the BADI?
    Thanks  in Advance!

    Hello,
    You can hide this field by creating a screen variant through SHD0 transaction. I have tested here and I
    could hide it (GV_DIST_IND in Program SAPLBBP_PDH_ACC screen 1000).    
    In the screen variant you should mark the output of GV_DIST_IND field.
    However, this option would hide this button for all documents.
    Kind regards,
    Ricardo

  • Material Column invisible in Purchase Order Screen after Upgrade

    Hi Freinds,
    Subject: MEPO1211-EMATN field invisible in Purchase Order (ME21N)
    We are doing an SAP Technical upgrade project from 4.6C to ECC6.0. The 4.6C developement box is upgraded to ECC6.0. I found that the Material Column is missing from the Purchase Order Item.
    In the right side of item screen, we can see the configuration icon. I have checked that configuration icon - Administrator - MEPO1211-EMATN - field is enabled in the invisible column.
    I tried all the possible ways to disable the tick mark. still problems persists.
    please let me know how to disable the tick mark (MEPO1211-EMATN)
    Thanks
    Ashok

    i have entered the test1 as variant, current setting automatically changed to test1.
    then i have clicked the administrator, disabled the tick mark for the material (MEPO1211-EMATN), i have activated and included in the new transport request, closed that subscreen and saved the variant.
    I have come out of the purchase order screen and entered the Purchase order screen again. still the material number column is invisible.
    Thanks
    Ashok

  • Material Column Invisible in Purchase Order Screen after Technical Upgrade

    Hi Freinds,
    Subject: MEPO1211-EMATN field invisible in Purchase Order (ME21N)
    We are doing an SAP Technical upgrade project from 4.6C to ECC6.0. The 4.6C developement box is upgraded to ECC6.0. I found that the Material Column is missing from the Purchase Order Item.
    In the right side of item screen, we can see the configuration icon. I have checked that configuration icon - Administrator - MEPO1211-EMATN - field is enabled in the invisible column.
    I tried all the possible ways to disable the tick mark. still problems persists.
    please let me know how to disable the tick mark (MEPO1211-EMATN)
    Thanks
    Ashok

    Hi Guys,
    I found the Problem. Let me share with you all.
    For the Purchase order document Type NB - i found the corresponding field selection NBF.
    Then i went to NBF screen layout and enabled the material as optional entry.
    I have opened the Purchase order screen (ME21N), material column is diplayed.
    Thanks
    Ashok

  • PURCHASE ORDER SCREEN LAYOUT

    HELLO GURUS,
    As you know that for standard purchase order document type is NB and field selection key is NBF,
    when i had gone through NBF,
    i only found three types of field attribute,
    1. required entry,
    2. optional entry,
    3. display..but cant find hidden field, so is there any hidden field for that..
    again in purchase order there are two field as return goods and free goods..
    but i cant find these fields in the screens of NBF..
    so kindly help me..
    regards

    hi merwyn,
    actually the free goods field is appeared in my purchase order screen, but when i want to create standard purchase order (NB) and suppose
    in item no 10 i give 20 quantity valuable goods
    in item no 20 i give 1 quantity free goods, than go for save  the document, it is saved.. no problem,
    but when i try for the same using  stock transfer order (UB),  the free good item is not saved, even if i cant able to flag it..
    but for the NBF and UBF the field setting are same for GR/IR control.
    plz help me ..
    regards
    raghu..

  • Custom fields on Purchase order screen in SRM are missing.

    Hi ALL,
    SRM 5.0 R/3 4.6c
    We have custom fields which appear on the create PO in SRM, the criteria for these fields to appear is if the item is of service type.So if its service item there will be additional/ custom fields for input purchase order screen in SRM,
    But at this these fields dont show up for service item PO's . this is happening in Q and P environments while it is working fine in D and S. No changes were made to the system.
    Also if I look in to bbp_pd info for the previous service PO, the data shows up in bbp_pd but the data or the custom fields are missing on the web.
    We tried deactivating/activating the custom class in Q , but that did not help us!
    Consider this as urgernt!
    Can anyone please throw some light on this!
    Thanks
    Krishna

    Have you implementated the BADI: BBP_CUF_BADI_2
    if yes, then keep a break point there and see if you are missing any thing there...

  • How to set the Purchase Order screen to display Add and Cancle button

    Hi Experts,
    Do anybody knows that how can we see the Add / Cancle button on Purchase Order screen ? , at present I need to compulsory scroll vertically to look at Add / Button button.
    In Stock Transfer / Inventory transfer screen when we maximise it than also we can see the add / cancle button
    will change of font will effect it ?
    BR
    Samir Gandhi

    Hi,
    Can you maximize the PO screen too? You should try a smaller font to seem more within a window form.
    Thanks,
    Gordon

  • Regarding Purchase Order Screen - Copy From

    Hi friends,
    In purchase order screen <b>Copy From</b> Button was in disable mode.i want to enable that button . i am using SAP Business One 2005 A(6.80.317) SP:01 version.
    expecting reply soon ......
    Thanks & Regards
    SARAN

    Hi,
    You cannot enable the Copy From button on the purchase order window. This is because there is no originating document for a purchase order (which is the first document in the chain on the purchasing side).
    Perhaps if you explain your reasons for needing this functionality someone can come up with a suitable workaround.
    Kind Regards,
    Owen

  • Customization to "Carry Out Sourcing" & "Process Purchase Order" Screens

    Hi, we are using SRM 4.0 and wondering if following screen customizations are possible
    <b>Carry Out Sourcing queue</b>
    Is it possible to use some of the existing Fields/Area to show key information within the queue that are important to Buyers such as Total PR Value, Required Date, Comment Field (for Buyer to write notes or status)? The fields Category and Quantity are not that important to us than the other fields mentioned above.
    <b>Process Purchase Order queue</b>
    Is it possible to use some of the existing Fields/Area to show key information within the queue such as Requestor Name, Required Date, Comment Field (for Buyer to write notes/status)? These are more important to us than the Purchasing Org. and Purchasing Group fields.
    The above requested fields will tremendously help the Buyer in managing the queue by making it easier to assign low value orders; by enbaling other Buyer/s to view cart status when covering for someone without drilling down per requisition/line. The comment field within the queue will help to immediately show why the order is on hold, etc.
    I would be interested to know as well if you have any suggestions on how we can assign low value orders to junior buyers faster and more efficiently and if there is an automated way to do it.

    Thanks - Here is the quick clarification. We are not using Sourcing Cockpit (eSourcing, Bidding) functionality in SRM. By "Carry Out Sourcing", I meant the area where Buyers look for workload and add approved requisitions to their work area. That is the screen we are trying to customize. Is there a template for that as well and is it easy to customize without breaking the code.
    Also please advice on customizing "Process Purchase Order" screen.
    Lastly, is there an option to autoamtically assign the Approved Shopping Cart to a Buyer based on the dollar amount?
    Thanks in advance;
    A

  • PO not visible in the Purchase Orders screen

    Hi All,
    There is a Purchase Order which we are not able to view in the 'Purchase Orders' screen. The PO status is 'IN PROCESS'. The PO is visible in the Purchase Orders Summary screen. Need to do some changes to the PO. Can you please let me know the exact cause for the issue.
    Regards,
    Radhika.

    There are times that documents may go into In Process - due to workflow setbacks.
    Please use the script POXRESPO.sql for these situations.
    The script resides in $PO_TOP/sql.
    You can also obtain it from the following patch -
    Patch 9072294 - Oracle Purchasing Reset PO script was giving a 'ORA-01476: DIVISOR IS EQUAL TO ZERO' Error.
    The script will handle most scenarios and can also take action to save the action history or remove it - but more importantly considers budgetary implications
    if Encumbrance is turned on in the system.
    The script given previous is not recommended.
    Regards,
    Mike

  • Purchase order screen exit SAPMM06E,screen number 0111

    Hi
    I am working on purchase order screen exit SAPMM06E and screen number 0111
    i am able to see customer screen in transaction but program control is not going to flow logic
    due to that i couldn't able to fetch data into custom fields.pls suggest me wat to do.
    Thanks & Regards
    Vinay

    Hi Vinay ,
    I think you are implementing the screen exit with the enhancement component 'MM06E005'.
    if thats the case you add your fiels in the screen area provided
    in the screen 'SAPMM06E' 0111 by creating the subscreen in the SE51 with the name space 'SAPLXM06' 0111 with then will be reflected (fields added) in the ME21n transaction .
    You have to write your logic in the EXITS provided in that enhancement component
    You have to write your logic in the exit 'EXIT_SAPMM06E_008'
    as it imports data from screen field which you placed in the tcode.
    Revert back to me for any queries.
    Reward points if useful.
    Thanks ,
    Surya Pydikondala.

  • PURCHASING GROUP FIELD IN THE CREATE PURCHASE ORDER SCREEN

    Hi Guys,
                    I am facing a special kind of problem while creating a Purchase Order.
    Once I type the T-Code ME21N and press the Enter Key, the Screen for creating the Purchase Order opens. But, the thing is that, the Purchasing Group Field is not displayed under the Org. Data Tab at the Header Level of the Purchase Order Screen ME21N. Only, Purchasing Organization and Company Code are displayed.
    But, when you try with ME22N and ME23N, this problem is not there.
    I think, this problem has started from yesterday afternoon.
    I checked some of the Settings. But, I could not make out the actual problem.
    This problem I am facing in IDES Server.
    But, it is fine with the Clients' Servers.
    Please guide me in resolving this issue.
    Waiting for the fast and positive response.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    +91-9910077829

    Hi,
    Follow the steps
    1. Go to "Personal Setting" Tab in PO
    2. Select "Default Values" menu
    3. In the PO Header section Select the Default Purchasing Group e.g. 000 initial
    Remember if the Purchasing group field is blank here then the Purchasing Group field will not appear in me21n transaction instead it will appear after you put relevant details like Material number and Plant. The purchasing group field is defaulted from Purchase Info record in such case. But you can always change it
    Regards,
    Niranjan

  • Delivery Completed Indicator Not Displaying in Purchase Order Screen

    Hi,
    Here clinet system has 2 document types for service orders. In one type of service order I can see the delivery completed indicator checkbox in purchase order screen & in other type of service order I am not able to see the delivery completed indicator chekbox.
    I have checked the screen layout for both purchase order types & assignement of layout to both order types. In both screen layout types I found that Delivery Completed Indicator Checkbox as Optional Entry. System should display delivery completed indicator in both type of Purchase Order create/change/display screen. Then why it is showing in one type of service order and not in other type of service order.
    Awaiting your reply.
    Regards
    Pradip

    Hi Pradip,
    You check the for your document type which field selectio is assigned in config
    spro-MM-Purchasing-purchase order- define document types
    And then go to
    spro-mm-purchase- purchae order-Define Screen Layout at Document Level
    select the field slection which is assigned to your document type and then go details and then double click the GR/IR and then select it as optional if it is selected as hidden.
    Cheers
    Chris

  • Adding a new check box in change purchase order screen

    Hi
      I have to add one custom field a check in the screen for change purchase order in EBP.
    We are using ITS.
    Kindly advice.
    Thanks and Regards
    Manoj

    Hello Manoj,
    you can define Customer Fields (CUF) at header, item, accounting level on any document type (including PO).
    Adding seach fields acts as old ABAP method of table append, i.e. those fields are stored in standard SRM tables. So you can process your own logic and checks against those fields.
    There is a BADI to control the display or not, the input or not, the default or input values.
    There is a BADI to control the ergonomy of CUF (by default they are added one after the other after standard fields).
    There have been many posts about CUF and linked OSS notes explaining own it works and which includes to use.
    Rgds
    Christophe

  • GL Configuration Purchase order condition

    Gurus,
    Kindly let us know T-code to see GL Configuration of Purchase order condition.
    Condition type...is as under
    ZDEC
    ZJWC
    JEXC
    SKTO
    JEXS
    Condiation Use "The condition type indicates, for example, whether, during pricing, the system applies a price, a discount, a surcharge, or other pricing elements, such as freight costs and sales taxes. For each of these pricing elements, there is a condition type defined in the system"

    Hi,
    Check in account key OB40 and OBYC settings
    Regards,
    JA

Maybe you are looking for

  • HTML select tag on irpt page - update database from options

    Hi all, I have an irpt page with two selects.  It is the traditional move stuff from one select to the other, then set the order of the options in the configured select.  (Admin page to specify an ordered list of items) After the user gets the list h

  • COPA: Report problem

    Dear all , I have created 1 Profitability report using ke31 and form by using ke34. Below is the screen shot of ke31: But while executing the report using ke30 profit center is not available under "Navigation".Below is the screen shot of ke30: I`m un

  • Isight build-in-camera

    to all expert, in your openion please let me know the possible problem of my mac os v10.4 build-in-camera. because the light indicator is glowing but the screen is blank. no picture appear.

  • Ongoing Problem With Updates

    I sort of think something is wrong with my iPhone. It seems like for the last 4 or 5 updates, the update would not run cleanly. It always hangs at one point and says I need to update and restore from backup. I finally said enough is enough and perfor

  • Cursor jumps around the screen

    After upgrading to Lion, moving my mouse will intermitently jump the cursor from it position in the middle of the screen to one of the edges.  I will try to move the cursor an inch or so in the middle of the screen and find the cursor hitting one of