Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

Similar Messages

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

How do I receive multiple texts from the same sender, each individually?

How do I receive multiple texts from the same sender, each individually?

So I receive automated reminders from my job & I want them to come individually. For example, one text -- time stamped 10:14 pm, then another 11:12 am, coming as separate msgs.

Connecting to multiple clusters from the same client

We have a scenario where our cache client (extend client) should be able to connect to multiple clusters. All the clusters use the exact same configuration (same caches, same services etc) but running in different geographical locations. I know that the <remote-addresses> can be used to add multiple addresses but I'm assuming this is provided solely for fault tolerance. So, does the client actually support connecting to multiple clusters at the same time?
Thanks
Sijo Mathew

Hi Sijo,
Normally to connect a client to multiple clusters you would just define multiple <proxy-scheme> settings in your client configuration file, each one having a different name and pointing to a different cluster. You then map caches to the proxy-scheme for the cluster those caches live on.
What may confuse things in your case is that you say the different clusters are identical and contain the same caches and services so you may have problems mapping caches on the client to different clusters.
What are you trying to achieve by doing this if the clusters are all identical?
JK

Multiple ResultSets from the same connection occuring at the same time

Is it possible to have the following code? The issue is that you are iterating through two result sets created from the same connection at the same time.
try {
Connection conn=createConnection();
Statement s=conn.createStatement();
ResultSet rs=s.executeQuery(someSQL);
while (rs.next()) {
     Statement s2=conn.createStatement();
      ResultSet rs2=s2.executeQuery(someOtherSQL);
      while (rs2.next()) {
           //do something
} catch (SQLException sqle) {
} finally {
freeConnection(conn);

Joel,
The code compiles, but I have not tried running it. It is a question I need to know, designing a program.
The question is whether some error would come up or the first ResultSet would be corrupted because a second were created before the first one was closed.
--Gabe

How Can I delete multiple messages from the same address in Mac Mail

Hope this is in the correct Community. Hope someone can help me to delete multiple email messages from the same email address.
At the moment I can do it by holding down the Command key and highlighting each email, but that can be difficult with many messages
to delete. Is there a quicker way?
Thanks for any help on this.

Thanks for the reply, appreciate your input. I did find another way of doing it and that is to highlight the first e-mail, hold down the shift key and click on the last one. That highlights them all and then they can all be deleted. Your ideas also work of course and I thank you for that. Cheers.

Can I combine multiple threads from the same contact in iMessage?

iMessage displays multiple threads for the same contact. Its very confusing and has resulted in lost messages. I've tried changing a number of settings but to no avail. Seems to require everyone in my contact list to eliminate all their email addresses in iMessage.
Begs the question why does iMessage even need this information? Worse, why does it suck it into its settings by default. The directory server should only require a valid Apple ID (associated with the users' devices) in order to direct an iMessage between two contacts.

Thanks for the reply, appreciate your input. I did find another way of doing it and that is to highlight the first e-mail, hold down the shift key and click on the last one. That highlights them all and then they can all be deleted. Your ideas also work of course and I thank you for that. Cheers.

How to best support CT2, CT3 and CT4 clients from the same machine?

I have clients that are still insisting on CT2 and CT3 for
their
editing. I am able to use CT3 with work arounds for my CT2
customes;
but would like to get on with CT4.
Can anyone point me to the Tips and Techniques that will
point out the
"gotcha's" when trying to support multiple versions of CT
from the same
machine?
Thanks,
Howard

To remove file from iPhoto and the HD simply put the files in the iPhoto trash and then go iPhoto Menu -> Empty trash.
This works if you're using iPhoto in the default setting, where the files are copied to the Library on import. If, however, you have a referenced library, you'll need to trash the files in your own folder structure yourself.
Regards
TD

Problems sorting multiple releases from the same year

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

*** Receiving multiple emails from the same person

This is a new issue that started happening today and I'm wondering if someone can help.
When receiving emails today, they are duplicating as they are coming into my inbox. The wierd thing is, the amount of duplicate emails is inconsistent. All emails are coming in as duplicates, but some messages duplicate up to 7 times for each sender. Other times, the message is in my inbox 4 times. Same message from the same sender.
Is there a way I can tell my MacMail to stop this from happening???
Thanks in advance.

People keep reporting this problem from time to time, and almost always it is some sort of Yahoo account and there is nothing the user can do to fix it. The problem usually fixes itself after some time for no apparent reason, just as it started.
Try using a different mail client, such as Thunderbird, and see whether the problem happens there as well. If so, then you know Mail has no bearing on it and there is nothing you can do other than complaining to your ISP or whoever is responsible for that account.

Multiple edits from the same clip.

Hi guys,
I have a project which requires a lot of different edits from the same clip.
Is there any way to do this without having to duplicate the same clip each time and then making my new edit?
For instance -
Clip 1 is 20 minutes long.
My first edit is from 1:10 to 1:35.
I then duplicate Clip 1 and make another edit from 2:40 to 3:55.
I'm using Premier CS5.
Thanks,
Dave.

Sub clips are not a general edit way of doing things efficiently.
They are more of a way of creating a bin full of "selects" ( selected clips in a Selects Folder for easy and quick access and review). That is a time consuming process but works well in some situations.
Standard general edit practice is to edit from Source Monitor.
drop Clip into Source Monitor
Mark In and Out point and drop that to the Time line. (many ways to do that Insert/ overlay/ shortcuts etc..)
Next...Move thru and create new In and Out and do the same
continue thru the Source Clip till complete...
Then on the Timeline ( sequence) Tim and work the clips.
Now ...some "learners" edit the source clip in the timeline using Razor Tool...hacking and chopping and deleting and dragging bits of stuff all over the show. Thats in efficient and clunky .

SAP GRC 10 : Can we connect GRC to multiple clients within the same system

We are having this requirement to connect SAP GRC to two different clients within the QA System.
Just wondering whether this is possible to connect at the same time. We have created connectors in both the clients in ECC and in GRC we have connectors for both ECC Cllients. When I try to add the connector for second client in SPRO , it is not even showing up entry for that
Please confirm whether we can do this

Hi Anil
If you have two ECC clients you would create two connectors to GRC. You would need two SM59 RFC connections (one for each client) to map them through.You can map them to the same logical group though.
What is not working for you? Did you define both clients as their own connectors?
Regards
Colleen

Send a message to multiple receivers from the same service

Hi all,
I registered on SAP community several months ago, I found many good hints and solutions to some of the problems encountered in XI and for which I thank you, but this is the first time I address a question to a common issue, written already about.
I have a scenario with 1 File FTP sender adapter and 2 Receiver adapters:1 FTP adapter and 1 MAIL adapter. The input message is sent to one of these receiver adapters based on the value taken by a specific field from the input message.The receiver adapters are using the same party and service.
The requirement is to solve this without using BPM.
I have read "multiple receiver" issue related blogs and tried to use the standard receiver determination. Thus, I have 1 Sender Agreement, 2 Receiver agreements (one for FTP and one for MAIL), 1 Interface Determinations (with the 2 inbound interfaces and interface mappings corresponding to FTP and MAIL output) and 1 standard Receiver Determination where I added the party and service twice and specified for both the condition. The condition is based on XPath, is correct.
In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Can you please give me some feedback on how to solve this problem? It is rather urgent.
I have also tried to create 2 Interface Determinations and have 2 Receiver Determinations, each one with the right condition. But I get the same error message.
Is the problem due to the fact that I don't use 2 different services ?
If you know how this can be solved without using BPM, please reply.
Thanks a lot,
Alina hudea

> In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Hi,
I think the problem in Receive Determination. As you mentioned when you remove one of the condition then it works..
What I concluded is, I think while creating your Receiver Determination for multiple receivers you added the receivers by pressing the plus sign and that means you are using mulitiple receivers with "AND" condition, so in this condition when both the condition will be true then only you will get success.
What you can do is, Just remove one of the receivers and then add it by pressing the "OR" symbol i.e. by pressing this ( [ ] ) symbol and put your conditions as you like.
I hope what I have concluded is correct..
Regards,
Sarvesh

Problems generating multiple services from the same EAR using servicegen

I have a single EJB JAR that contains multiple stateless session beans. I
want to expose each of these individually as a service. So I have defined
the following in my build file:
<servicegen destEar="${ear.file}" warName="${war.file.name}"
contextURI="web_services">
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="AService"
serviceURI="/AService" includeEJBs="AService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="BService"
serviceURI="/BService" includeEJBs="BService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="CService"
serviceURI="/CService" includeEJBs="CService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="DService"
serviceURI="/DService" includeEJBs="DService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="EService"
serviceURI="/EService" includeEJBs="EService" generateTypes="True"
expandMethods="True"/>
</servicegen>
I execute the task and it runs without issue. However, when I attempt to
deploy the EAR I get some odd results (there are multiple jars listed all
with my original name and then a number appended, for example MyApp.ear2).
The deployment fails because each of these JARs contains the same session
beans.
So, I'm wondering if my only option is to package each session bean in a
separate EJB JAR or if there is another way I could get this to work.
Thanks,
Rob

Thanks, Neal. I'll do as you suggest.
Just a little feature enhancement request, as well. It would be nice if the
option existed to break out the webservices for all the session beans in a
ejb rather than creating one all-encompassing interface of all the methods.
I think this would be a useful feature.
Thanks, again,
Rob
"Neal Yin" <[email protected]> wrote in message
news:[email protected]...
I am not sure what can cause this. But I will make servicegen check for
duplicate.
For now, in order to make sure your automatic build process, you can use
ant's build in task "jar" to update your application.xml with a correctone
after servicegen.
-Neal
"Rob Moore" <[email protected]> wrote in message
news:[email protected]...
Neal,
After discussing this issue with a coworker, I found that when he buildsthe
ear on his machine using the servicegen entries I specified previously,the
application.xml is generated correctly. Mine, as you guessed, puts in
multiple module entries all containing references to the same jar. I'm
puzzled because we are apparently running in the same environment. Anyidea
what might be causing it?
Thanks,
Rob
"Neal Yin" <[email protected]> wrote in message
news:[email protected]...
Hi Rob,
There is something wrong during generating application.xml for the
ear.
After servicegen, if you open generated application.xml, you probablycan
see duplicate entries for one module. Please go ahead delete thoseredundant
entries. Let me know if this works.
-Neal
"Rob Moore" <[email protected]> wrote in message
news:[email protected]...
I have a single EJB JAR that contains multiple stateless session
beans.
I
want to expose each of these individually as a service. So I havedefined
the following in my build file:
<servicegen destEar="${ear.file}" warName="${war.file.name}"
contextURI="web_services">
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="AService"
serviceURI="/AService" includeEJBs="AService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="BService"
serviceURI="/BService" includeEJBs="BService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="CService"
serviceURI="/CService" includeEJBs="CService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="DService"
serviceURI="/DService" includeEJBs="DService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="EService"
serviceURI="/EService" includeEJBs="EService" generateTypes="True"
expandMethods="True"/>
</servicegen>
I execute the task and it runs without issue. However, when I
attempt
to
deploy the EAR I get some odd results (there are multiple jars
listed
all
with my original name and then a number appended, for exampleMyApp.ear2).
The deployment fails because each of these JARs contains the samesession
beans.
So, I'm wondering if my only option is to package each session bean
in
a
separate EJB JAR or if there is another way I could get this to
work.
>>>>
Thanks,
Rob

ServletResponse - multiple requests from the same cl

If a user clicks a link in an HTML page which is directed to a servlet, and then clicks again (one or more times) before the servlet has fully written its response, I believe a thread with the same Session is created for each instance.
How do I know which thread gets to send its response ? It appears that all the threads that are created after the response writing has started, but before the writer is closed fall into a black hole ?
Is there a way to check immediately in doPost that the instance is going to fail ? I've looked at isCommited(), but I dont seem to be able to find an implementation of it to use in my IDE - I've looked in 2.3?
I was hoping that each request would use the same HttpServletresponse, but it doesn't - any ideas ?
The problem is that shared objects in the session are causing problems - perhaps a solution lies with the session object itself by writing a parameter to it ?
Thanks

I just tried setting a parameter in the session and returning from the doPost method when it is set, but this just generates a blank page on the second request, which arrives before the first has finished.
I notice however that the second request can 'takeover' from the first (if i hit a different link as the second click - I get that response not the first link's)
My question therefore is what determines this supercession, and can I control it in any way ?
Also can the request know it wins/loses as soon as I hit doPost ?
Thanks
Chris

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Similar Messages

Maybe you are looking for