Connecting Deskjet 3054 to Maverick with Motorola Router

I have an HP Deskjet 3054 that I am trying to connect to a Motorolla SBGG6580-G228. I accessed the PIN from the printer, went to my router configuration page, entered the PIN where it says "add client", but the two never connect. I have tried resetting both devices, and they both time out. I have tried it with several different pins given by the printer.
I then searched the forums that advised getting the IP from the printer, but the report says "not applicable".
So frustrated at this point. Can't stand the blinking blue light. It is haunting me. Can anybody help? Please!
This question was solved.
View Solution.

Hi @mschwartzz ,
Welcome to the Forums!
I noticed your post about the issue connecting to the network and I understand the frustration that comes along with many attempts!
I would like for you to review a post about connecting to the network which I hope will help you. Before you follow the post instructions, please restore the network defaults by selecting the "Wireless Menu then Settings then Defaults".
Please see @Jon-W 's post here: How can I setup a Deskjet 3050a/J611
I hope this helps!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this?

I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this? I am a total MacBook nube and can use any help you may offer! Thank you so much.

How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart from Safari, I get this print dialog box:
(Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
A

Help!! How can I get my timemachine to work with motorola router

I just had comcast installed in home. Apple router is not working with motorola sb510u

You may need to reset your broadband modem to convince it to connect to a "new" device. Depending on the model of modem, that can be as easy as removing power for a few moments. If that doesn't work, remove power and wait 15 minutes. Further reset steps can involve pressing a "reset" button or removing a battery if the modem has one. In the worst case, your ISP may need to edit its settings to update to the MAC address of the new router. If they won't or can't do that, powering down the modem for 16 to 36 hours can reset the connection.

Why can i get a connection w/my wireless laptop with this router (WRT54GS ) but not on the desktop?

I have an excellent signal w/this laptop (wireless) but when I try to use the desktop with the same router it wont go. Do I need driver download? Do I need an IP address for the router? I use tech support for connecting the desktop to the internet straight from the modem they sent me but because I didnot buy the router from them, they wont help me figure out once I plug in the router and setup more than one machine, i cant do it. Initailly, I setup everything w/my laptop being the main computer in my home until I got this desktop recently. So knowing the desktop is fine because it works straight from the modem, and the laptop works w/the router and modem hooked up together but not the desktop, what the HECK is the problem? I dont have any cd or anything w/this router because when I moved, i never found the box it came in again. Is there someplace online I can find what I need? Im wondering how I will know if I have a response from someone on this thread? will I get an email from this site? gosh Im confused.
(Mod Note: Email address removed.)
Message Edited by kent07 on 10-28-2009 07:29 PM

How you are trying to use the desktop...wired or wireless?
If you are trying to connect the computer to the router via an Ethernet cable then,try changing the cable.Check the ip address you are getting on the computer...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on OK...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Connected Deskjet 6940 to computer with windows 7 64 bit, duplex print will not work?

I have a Deskjet 6940 model C8970A. The Duplex printer function does not work. It will manually ask me to turn around all the pages to print on the other side. Before it would print front then back of page at a time. I have Windows 7 64 bit on the new computer.

Hi,
The Duplex Unit is disabled by default, make sure to enable the accessory as following:
Enter Control Panel > Devices and Printers
Right click the HP Deskjet 6940 icon, then click Printer Properties.
Select the Device Settings tab.
Set the Duplex Unit as Installed, click OK.
Now set Print On Both Sides as Automatically from the Printing Preferences Dialog.
Please let me know if you may still experience any issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Deskjet 3054 ISSUES with Maverick

Hi,
I'm having insane issues connecting my printer over a wireless network. My computer runs on OS X 10.9 Maverick and my printer is an HP Deskjet 3054. For some reason, I can't connect to it through wireless. It only works when I have a USB connecting my printer to my laptop. I've visited every page on this website and can't find an answer. There is no driver for it - I updated all my software and there was nothing related to HP. Please help!
Thanks.
This question was solved.
View Solution.

Hi taliataline
I understand you are unable to setup the wireless connection.
Restore the printer defaults.
Go to the setup, wireless menu, defaults.
Then go back in and enable wireless.
Go to the setup, wireless menu, enable wireless.
Print out a configuration page.
Go to the setup, wireless menu, print report.
The ip address should be available. (starting with 169.)
Open a web browser. (safari, internet explorer)
Type in the ip address to configure the wireless.
Click on networking tab, wireless and fill out the information.
Apply.
On the mac now you can add the printer. (might have to select the airprint driver or Deskjet 3054)
http://support.apple.com/kb/PH13761?viewlocale=en_US
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

My HP Deskjet 3054 doesn't recognize my new router

I have an HP Deskjet 3054 wireless printer which has worked fine until a recent thunderstorm took out my wireless router and DSL modem. Modem and router have been replaced and all of my devices work just fine except the pritner which will now only work when connected to the computer via a USB cable.
The blue network light on the printer is flashing.
My laptop is a Dell Studio running Vista. The router is a Westell 7500

OK, what does not recognize the printer - the router (because the printer has no IP address) or your computer (because it cannot find the printer)?
Do a self-test from the front of the printer - does it show a valid IP address (192.168.X.X)?
Life is too serious to be taken seriously

How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
thanks
p.h.thakur

That is not correct sabretooth04,
The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
The specifications can be found in here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en...
ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Time Warner Cable wideband broadband slowness issues with Motorola sbg6580 router

I recently purchased Time Warner Wideband broadband cable for Internet service. 50 Megabit down and 5 Megabit up. When I run the speedtests, I can see the full speed measure, but I stil see issues with browsing and getting connected to VPN.
I had Time Warner Cable come out and replace the router. I still had the same issues after the replacement of the SBG6580 router. There are no updates to the firmware on this router.
I consistently see slow web page loads and problems while on VPN. I found posts on the web saying that this router's firewall was not compatible with Apple's computer products. Even with this firewall turned off inside the router, I still had the same slowness and misc issues.
I finally just changed the router into a gateway using the Rg Passthrough (which automatically turned off the NATP). I added the Time Capsule's MAC ID to the bypass section on the Router. I set up my Time Capsule to act as the main router with a cable running from the Motorola router to the Time Capsule WAN port.
The web pages and VPN are extremely faster. So the root cause is with the Motorola SBG6580 router obviously. I always got the full speed on the Speedtest.net web site, but now everything works fine with this change.

Dude. You are awesome! I am SOOOOOOOOOOOOOO glad you posted this solution. The fact that you took the time to post even AFTER you figured out a solution shows how thoughtful you are as an individual.
Its amazing to me that someone would comment adversely becuase they feel its in the wrong forum. If it affected their life as it does mine then they would get it. Amazing how people cant see past themselves. Who cares what forum its in if its informative? Worse case just move it to a different forum. We need more people like you and less like them in the world.
Thanks Im gonna try the solution right now!

My hp deskjet 3054 says its not online whn i try to print but it is connected to my network

my hp deskjet 3054 is conncected to my network and says "congratulations on the successful setup of your wirless printer" when i print my wireless network test report from the print itself but when i try to print form my mac i get a message saying printer is offline. Any suggestions would be greatly appreciated.

So the printer is connected to your wireless network, right?
What version of OS X? If 10.6 or 10.7, download and install this: support.apple.com/kb/DL907
Then, reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Connection to R/3 with SAP Router

Hello,
I want a connecton from XI 3.0 to R/3 with SAP Router.
But if i want to import the RFCs i become no connection.
I Edit Software Component Version, but there is it not possible to set any Sap Router String.
For Connection Data you can only set System, Client, Message Server and
Group.
I have also test to write the Router String before the Message Server IP without any sucess. Not enough Place to write the holfe Path in the Field.
I become no connection to the R/3 to import the RFCs.
Regards,
Robin

pls check correct port number..
basis will give u this information. or u use tcode SCOT.

Not able to connect with my router, but other networks work ok.

I have a 2d generation iPod Touch. I can't connect to my home network that operates on a DLink DIR-628 router. However I can connect to other access points with no trouble at all. When my iPod tries to connect with my router, it asks for my password and I enter the password I think is correct, but it won't accept it. When I check the router web page there is no password visible. Does the problem lie with the Router or with the iPod Touch? I have three other computers and two wireless printers that are operating through the router with no problem at all.

Have you tried:
- Resetting your iPod:
- Resetting network settings on the iPod: Setting>General>reset>Reet Network Settins
- Powering off and then back on your router
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Connecting Deskjet 3054 to Maverick with Motorola Router

Similar Messages

Maybe you are looking for