ConsoleOne snapins snapped
What is the correct procedure to install and manage the DAS object?
I've got a new install of NetWare 6.5 SP3, with Radius from BM3.8 and
ConsoleOne NMAS snapins from the snapins included with ConsoleOne V 1.3.6d.
I can create a DAS object and configure an object name and password only
once. From then on the DAS object becomes unmanageble from ConsoleOne which
just locks up when you select properties on the object. Same thing happens
on new install of OES.
Tried mapping a drive from the Novell server with the same result (as per
previous post "no dial access object").
I then launched ConsoleOneDos from the server bin directory on my
workstation. It still locked up when selecting properties on the DAS
object, but the DOS box continually scrolls with this message: "Waiting for
reading vendor list from Attribute file"
Help... please.... :-{
Thanks Mike. But the problem is an old one apparently:
http://www.novell.com/coolsolutions/qna/8422.html
All I had to do was get a copy of that pesky RADIUS.ATR file...
All working as advertised now! ;-)
<[email protected]> wrote in message
news:kCJie.3916$[email protected]..
>> What is the correct procedure to install and manage the DAS object?>
>> I've got a new install of NetWare 6.5 SP3, with Radius from BM3.8 and
>> ConsoleOne NMAS snapins from the snapins included with ConsoleOne V
> 1.3.6d.
>> I can create a DAS object and configure an object name and password
> only
>> once. From then on the DAS object becomes unmanageble from ConsoleOne
> which
>> just locks up when you select properties on the object. Same thing
> happens
>> on new install of OES.
>>
>> Tried mapping a drive from the Novell server with the same result (as
> per
>> previous post "no dial access object").
>>
>> I then launched ConsoleOneDos from the server bin directory on my
>> workstation. It still locked up when selecting properties on the DAS
>> object, but the DOS box continually scrolls with this message: "Waiting
> for
>> reading vendor list from Attribute file"
>>
>> Help... please.... :-{
>>
>>
> I'm having similar performance issues with ConsoleOne 1.3.6d as well. I
> back reved to 1.3.6c and the problems went away. They weren't with DAS
> objects though. Hope this helps.
>
> Mike
Similar Messages
-
ConsoleOne Snapin Installation
This may sound like a dumb question, but does anyone know how to install the
ZFH snapins to ConsoleOne running from a NetWare server? I was only able to
install them to a locally installed copy of ConsoleOne on my workstation. I
have an enterprise customer that runs C1 from a clustered server environment
and I need to update the copy running from the server. Just copying the
ZFH snapin directory from my workstation to the server did not work. Thanks
for your help.
Dave StoneAs Jason has suggested, if you try to install ZfH on a machine that does not
find a ConsoleOne installation anywhere (looks for it in the registry, and
the local drives), it would copy the ConsoleOne-related files in
<ZfH_install_dir>/ConsoleOne.
You could copy these files to the server and you should be ready to go.
Thanks & Regards
Anand Sinha
"Jason Doering" <[email protected]> wrote in message
news:[email protected]...
> When I installed the ZFH server on Windows, it put a copy of all the
> ConsoleOne snapin files in C:\Program Files\Novell\ZfH\ConsoleOne. If
> you have this directory, copy the subfolders (bin, help, jre, lib,
> resources, and snapins) into SYS:\public\mgmt\ConsoleOne\1.2.
>
> [email protected] wrote:
> > Apparently there are DLLs and other things that were installed to the
> > PC during the ZFH snapin installation. It does not appear that
> > copying the PC installation of ConsoleOne from the PC to the server
> > would work.
> >
> > Has anyone been able to get the ZfH snapins to install to a copy of
> > ConsoleOne running on a server? Please advise.
> >
> > TIA,
> > Claire Pieterek
> >
> > On Thu, 22 Apr 2004 19:21:39 GMT, Frank Tessnow<[email protected]> wrote:
> >
> >
> >>Maybe, that I'm false. But how about simply copying an
> >>updated C1 to the clustered server puiblic dir?
> >>
> >>Regards - Frank
> >>
> >>
> >>>>>David Stone<[email protected]> 21.04.2004 21:49:12
> >>>>>
> >>>
> >>>This may sound like a dumb question, but does anyone know
> >>>how to install the
> >>>ZFH snapins to ConsoleOne running from a NetWare server?
> >>
> >>I
> >>
> >>>was only able to
> >>>install them to a locally installed copy of ConsoleOne on
> >>>my workstation. I
> >>>have an enterprise customer that runs C1 from a clustered
> >>>server environment
> >>>and I need to update the copy running from the server.
> >>>Just copying the
> >>>ZFH snapin directory from my workstation to the server did
> >>>not work. Thanks
> >>>for your help.
> >>>
> >>>Dave Stone
> >
> > -
I'm having a bit of a problem with ConsoleOne snapins and RADIUS objects.
The Radius DAS object appears as unknown on all my systems running
ConsoleOne 1.3.6d. I have one system running v1.3.6 and the radius objects
appear fine. All consoleone installations have the same NMAS snapins
loaded (from the iChain CD). I recall having to copy radius.atr to the
consoleone/bin directory to get it working the first time but this doesn't
seem to do the trick on these other workstations.
Also, almost out of the blue, I don't see the my new (RSA) login process
listed under the login methods of the user object properties anymore. I'm
not sure what has changed as it's only been about two weeks since I've been
out to this site. It still works for the users that I previously setup but
I can't configure new users.
Does anyone have any thoughts?I got the RSA login method to appear again. I had to reinstall the RSA
NMAS snapin that I downloaded from RSA. Something must have gotten corrupt.
However, I still can't see the properties of the Radius objects in
ConsoleOne. The only thing I can find is a potentially bad radius.atr
file. I've copied this file from a working system to the other systems but
its still missing something. Snap-ins are sooo much fun.
> I'm having a bit of a problem with ConsoleOne snapins and RADIUS objects.
> The Radius DAS object appears as unknown on all my systems running
> ConsoleOne 1.3.6d. I have one system running v1.3.6 and the radius objects
> appear fine. All consoleone installations have the same NMAS snapins
> loaded (from the iChain CD). I recall having to copy radius.atr to the
> consoleone/bin directory to get it working the first time but this doesn't
> seem to do the trick on these other workstations.
>
> Also, almost out of the blue, I don't see the my new (RSA) login process
> listed under the login methods of the user object properties anymore. I'm
> not sure what has changed as it's only been about two weeks since I've been
> out to this site. It still works for the users that I previously setup but
> I can't configure new users.
>
> Does anyone have any thoughts? -
Can't Launch ConsoleOne due to Java error
Hi Group,
After reinstalling NLSBS, when I try to start ConsoleOne I recieve this
new error.
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_06-b01 mixed mode)
# An error report file has been saved as hs_err_pid5338.log.
# Please refer to the file for further information.
../ConsoleOne: line 100: 5338 Aborted $prog -noverify
-Dapplication.home="${APPHOME}" -classpath "$classpath"
com.novell.application.console.shell.Console "$@"
Attached is the output log from the error.
Can someone offer me any assistance on this?
Thanks,
Ron
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4EEAF7E4
Function=DSunilen+0x8
Library=/usr/lib/libndssdk.so.1
Current Java thread:
at novell.jclient.JClient.listDirectories(Native Method)
at com.novell.admin.ns.nw.jclient.NetWareNamespaceImp l.getChildren(NetWareNamespaceImpl.java:87)
at com.novell.admin.ns.nw.TreePickerDlg.launch(TreePi ckerDlg.java)
at com.novell.admin.common.security.NLoginDlg.launchT reePicker(NLoginDlg.java)
at com.novell.admin.common.security.NLoginDlg.actionP erformed(NLoginDlg.java)
at javax.swing.AbstractButton.fireActionPerformed(Abs tractButton.java:1764)
at javax.swing.AbstractButton$ForwardActionEvents.act ionPerformed(AbstractButton.java:1817)
at javax.swing.DefaultButtonModel.fireActionPerformed (DefaultButtonModel.java:419)
at javax.swing.DefaultButtonModel.setPressed(DefaultB uttonModel.java:257)
at javax.swing.plaf.basic.BasicButtonListener.mouseRe leased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.jav a:5134)
at java.awt.Component.processEvent(Component.java:493 1)
at java.awt.Container.processEvent(Container.java:156 6)
at java.awt.Component.dispatchEventImpl(Component.jav a:3639)
at java.awt.Container.dispatchEventImpl(Container.jav a:1623)
at java.awt.Component.dispatchEvent(Component.java:34 80)
at java.awt.LightweightDispatcher.retargetMouseEvent( Container.java:3450)
at java.awt.LightweightDispatcher.processMouseEvent(C ontainer.java:3165)
at java.awt.LightweightDispatcher.dispatchEvent(Conta iner.java:3095)
at java.awt.Container.dispatchEventImpl(Container.jav a:1609)
at java.awt.Window.dispatchEventImpl(Window.java:1590 )
at java.awt.Component.dispatchEvent(Component.java:34 80)
at java.awt.EventQueue.dispatchEvent(EventQueue.java: 450)
at java.awt.EventDispatchThread.pumpOneEventForHierar chy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarch y(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEventsForHierarch y(EventDispatchThread.java:140)
at java.awt.Dialog.show(Dialog.java:551)
at com.novell.application.console.widgets.NDialog.sho w(NDialog.java)
at com.novell.admin.common.security.NLoginDlg.launch( NLoginDlg.java)
at com.novell.admin.common.security.Login.doTheLogin( Login.java)
at com.novell.admin.common.security.Login.<init>(Logi n.java)
at com.novell.admin.ns.nds.jclient.NDSNamespaceImpl.a uthenticate(NDSNamespaceImpl.java:3214)
at com.novell.admin.ndscommon.snapins.NDSAuthenticati onToolbarMenuSnapin.execute(NDSAuthenticationToolb arMenuSnapin.java)
at com.novell.application.console.snapin.AbstractTool BarMenuSnapin$1.actionPerformed(AbstractToolBarMen uSnapin.java)
at javax.swing.AbstractButton.fireActionPerformed(Abs tractButton.java:1764)
at javax.swing.AbstractButton$ForwardActionEvents.act ionPerformed(AbstractButton.java:1817)
at javax.swing.DefaultButtonModel.fireActionPerformed (DefaultButtonModel.java:419)
at javax.swing.DefaultButtonModel.setPressed(DefaultB uttonModel.java:257)
at javax.swing.plaf.basic.BasicButtonListener.mouseRe leased(BasicButtonListener.java:245)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEven tMulticaster.java:227)
at java.awt.Component.processMouseEvent(Component.jav a:5134)
at java.awt.Component.processEvent(Component.java:493 1)
at java.awt.Container.processEvent(Container.java:156 6)
at java.awt.Component.dispatchEventImpl(Component.jav a:3639)
at java.awt.Container.dispatchEventImpl(Container.jav a:1623)
at java.awt.Component.dispatchEvent(Component.java:34 80)
at java.awt.LightweightDispatcher.retargetMouseEvent( Container.java:3450)
at java.awt.LightweightDispatcher.processMouseEvent(C ontainer.java:3165)
at java.awt.LightweightDispatcher.dispatchEvent(Conta iner.java:3095)
at java.awt.Container.dispatchEventImpl(Container.jav a:1609)
at java.awt.Window.dispatchEventImpl(Window.java:1590 )
at java.awt.Component.dispatchEvent(Component.java:34 80)
at java.awt.EventQueue.dispatchEvent(EventQueue.java: 450)
at java.awt.EventDispatchThread.pumpOneEventForHierar chy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarch y(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispa tchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispa tchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThre ad.java:99)
Dynamic libraries:
08048000-0804e000 r-xp 00000000 03:02 106173 /usr/ConsoleOne/jre/bin/java
0804e000-0804f000 rw-p 00005000 03:02 106173 /usr/ConsoleOne/jre/bin/java
40000000-40016000 r-xp 00000000 03:02 19791 /lib/ld-2.3.3.so
40016000-40017000 rw-p 00016000 03:02 19791 /lib/ld-2.3.3.so
4002b000-40038000 r-xp 00000000 03:02 19819 /lib/tls/libpthread.so.0
40038000-40039000 rw-p 0000d000 03:02 19819 /lib/tls/libpthread.so.0
4003b000-4003d000 r-xp 00000000 03:02 19800 /lib/libdl.so.2
4003d000-4003e000 rw-p 00002000 03:02 19800 /lib/libdl.so.2
4003e000-40147000 r-xp 00000000 03:02 19817 /lib/tls/libc.so.6
40147000-4014f000 rw-p 00109000 03:02 19817 /lib/tls/libc.so.6
40153000-40407000 r-xp 00000000 03:02 106219 /usr/ConsoleOne/jre/lib/i386/client/libjvm.so
40407000-405e7000 rw-p 002b3000 03:02 106219 /usr/ConsoleOne/jre/lib/i386/client/libjvm.so
405f7000-405ff000 r-xp 00000000 03:02 106246 /usr/ConsoleOne/jre/lib/i386/native_threads/libhpi.so
405ff000-40600000 rw-p 00007000 03:02 106246 /usr/ConsoleOne/jre/lib/i386/native_threads/libhpi.so
4060a000-4061c000 r-xp 00000000 03:02 19803 /lib/libnsl.so.1
4061c000-4061d000 rw-p 00011000 03:02 19803 /lib/libnsl.so.1
4061f000-40640000 r-xp 00000000 03:02 19818 /lib/tls/libm.so.6
40640000-40641000 rw-p 00020000 03:02 19818 /lib/tls/libm.so.6
40641000-40651000 r-xp 00000000 03:02 106243 /usr/ConsoleOne/jre/lib/i386/libverify.so
40651000-40653000 rw-p 0000f000 03:02 106243 /usr/ConsoleOne/jre/lib/i386/libverify.so
40653000-40674000 r-xp 00000000 03:02 106230 /usr/ConsoleOne/jre/lib/i386/libjava.so
40674000-40676000 rw-p 00020000 03:02 106230 /usr/ConsoleOne/jre/lib/i386/libjava.so
40676000-4068a000 r-xp 00000000 03:02 106244 /usr/ConsoleOne/jre/lib/i386/libzip.so
4068a000-4068d000 rw-p 00013000 03:02 106244 /usr/ConsoleOne/jre/lib/i386/libzip.so
4068d000-41d62000 r--s 00000000 03:02 106307 /usr/ConsoleOne/jre/lib/rt.jar
41da5000-41dbc000 r--s 00000000 03:02 106314 /usr/ConsoleOne/jre/lib/sunrsasign.jar
41dbc000-41e2e000 r--s 00000000 03:02 106264 /usr/ConsoleOne/jre/lib/jsse.jar
41e2e000-41e41000 r--s 00000000 03:02 106263 /usr/ConsoleOne/jre/lib/jce.jar
41e41000-42109000 r--s 00000000 03:02 106184 /usr/ConsoleOne/jre/lib/charsets.jar
4c3c3000-4c3f6000 r--p 00000000 03:02 22811 /usr/lib/locale/en_US.utf8/LC_CTYPE
4c3f6000-4c3fc000 r--s 00000000 03:02 20226 /usr/lib/gconv/gconv-modules.cache
4c600000-4c68e000 r--s 00000000 03:02 106768 /usr/ConsoleOne/ConsoleOne.jar
4c68e000-4c956000 r-xp 00000000 03:02 106222 /usr/ConsoleOne/jre/lib/i386/libawt.so
4c956000-4c96c000 rw-p 002c7000 03:02 106222 /usr/ConsoleOne/jre/lib/i386/libawt.so
4c991000-4c9e4000 r-xp 00000000 03:02 106238 /usr/ConsoleOne/jre/lib/i386/libmlib_image.so
4c9e4000-4c9e5000 rw-p 00052000 03:02 106238 /usr/ConsoleOne/jre/lib/i386/libmlib_image.so
4c9e5000-4c9f2000 r--s 00000000 03:02 106769 /usr/ConsoleOne/ConsoleOneCore.jar
4c9f8000-4c9ff000 r-xp 00000000 03:02 32841 /usr/X11R6/lib/libXp.so.6.2
4c9ff000-4ca00000 rw-p 00006000 03:02 32841 /usr/X11R6/lib/libXp.so.6.2
4ca00000-4ca4f000 r-xp 00000000 03:02 32850 /usr/X11R6/lib/libXt.so.6.0
4ca4f000-4ca53000 rw-p 0004e000 03:02 32850 /usr/X11R6/lib/libXt.so.6.0
4ca53000-4ca61000 r-xp 00000000 03:02 32825 /usr/X11R6/lib/libXext.so.6.4
4ca61000-4ca62000 rw-p 0000d000 03:02 32825 /usr/X11R6/lib/libXext.so.6.4
4ca62000-4ca67000 r-xp 00000000 03:02 32852 /usr/X11R6/lib/libXtst.so.6.1
4ca67000-4ca68000 rw-p 00004000 03:02 32852 /usr/X11R6/lib/libXtst.so.6.1
4ca68000-4cb60000 r-xp 00000000 03:02 32814 /usr/X11R6/lib/libX11.so.6.2
4cb60000-4cb64000 rw-p 000f7000 03:02 32814 /usr/X11R6/lib/libX11.so.6.2
4cb64000-4cb6c000 r-xp 00000000 03:02 32811 /usr/X11R6/lib/libSM.so.6.0
4cb6c000-4cb6d000 rw-p 00007000 03:02 32811 /usr/X11R6/lib/libSM.so.6.0
4cb6d000-4cb82000 r-xp 00000000 03:02 32809 /usr/X11R6/lib/libICE.so.6.3
4cb82000-4cb83000 rw-p 00014000 03:02 32809 /usr/X11R6/lib/libICE.so.6.3
4cb85000-4cba2000 r--s 00000000 03:02 101789 /usr/lib/jclient.jar
4cba2000-4cc13000 r--s 00000000 03:02 132854 /usr/ConsoleOne/ConsoleOneExt/GWAdmin.jar
4cc13000-4cc7d000 r--s 00000000 03:02 132855 /usr/ConsoleOne/ConsoleOneExt/GWAdminDirectory.jar
4cc7d000-4ccac000 r--s 00000000 03:02 132856 /usr/ConsoleOne/ConsoleOneExt/GWAdminUtil.jar
4ccac000-4cdc0000 r--s 00000000 03:02 132857 /usr/ConsoleOne/ConsoleOneExt/GroupWiseRes.jar
4cdc0000-4cdd7000 r--s 00000000 03:02 106771 /usr/ConsoleOne/ConsoleOneExt/NetComponents.jar
4cdd7000-4ce01000 r--s 00000000 03:02 106772 /usr/ConsoleOne/ConsoleOneExt/Widgets.jar
4ce01000-4ce41000 r--s 00000000 03:02 106773 /usr/ConsoleOne/ConsoleOneExt/collections.jar
4ce41000-4cf2d000 r--s 00000000 03:02 106774 /usr/ConsoleOne/ConsoleOneExt/jgl3.1.0.jar
4cf2d000-4cf82000 r--s 00000000 03:02 106775 /usr/ConsoleOne/ConsoleOneExt/jh.jar
4cf82000-4d22d000 r--s 00000000 03:02 132858 /usr/ConsoleOne/ConsoleOneExt/njclv2.jar
4d22d000-4d22f000 r--s 00000000 03:02 106776 /usr/ConsoleOne/ConsoleOneExt/njha.jar
4d22f000-4d267000 r--s 00000000 03:02 132859 /usr/ConsoleOne/ConsoleOneExt/njweb.jar
4d267000-4d3d5000 r--s 00000000 03:02 132860 /usr/ConsoleOne/ConsoleOneExt/xerces.jar
4d3d5000-4d48e000 r-xp 00000000 03:02 106226 /usr/ConsoleOne/jre/lib/i386/libfontmanager.so
4d48e000-4d48f000 ---p 000b9000 03:02 106226 /usr/ConsoleOne/jre/lib/i386/libfontmanager.so
4d48f000-4d4a9000 rw-p 000b9000 03:02 106226 /usr/ConsoleOne/jre/lib/i386/libfontmanager.so
4d52b000-4d52c000 r-xp 00000000 03:02 32722 /usr/X11R6/lib/X11/locale/libhttps://www.novell.com/common/xlcUTF8Load.so.2
4d52c000-4d52d000 rw-p 00000000 03:02 32722 /usr/X11R6/lib/X11/locale/libhttps://www.novell.com/common/xlcUTF8Load.so.2
4d52d000-4d53d000 r-xp 00000000 03:02 106240 /usr/ConsoleOne/jre/lib/i386/libnet.so
4d53d000-4d53e000 rw-p 0000f000 03:02 106240 /usr/ConsoleOne/jre/lib/i386/libnet.so
4d540000-4d548000 r-xp 00000000 03:02 32823 /usr/X11R6/lib/libXcursor.so.1.0.2
4d548000-4d549000 rw-p 00007000 03:02 32823 /usr/X11R6/lib/libXcursor.so.1.0.2
4d549000-4d550000 r-xp 00000000 03:02 32847 /usr/X11R6/lib/libXrender.so.1.2.2
4d550000-4d551000 rw-p 00006000 03:02 32847 /usr/X11R6/lib/libXrender.so.1.2.2
4d551000-4d56d000 r-xp 00000000 03:02 32720 /usr/X11R6/lib/X11/locale/libhttps://www.novell.com/common/ximcp.so.2
4d56d000-4d56f000 rw-p 0001b000 03:02 32720 /usr/X11R6/lib/X11/locale/libhttps://www.novell.com/common/ximcp.so.2
4d894000-4d898000 r-xp 00000000 03:02 19805 /lib/libnss_dns.so.2
4d898000-4d899000 rw-p 00003000 03:02 19805 /lib/libnss_dns.so.2
4d899000-4d8a8000 r-xp 00000000 03:02 19812 /lib/libresolv.so.2
4d8a8000-4d8a9000 rw-p 0000f000 03:02 19812 /lib/libresolv.so.2
4d8bc000-4d8d2000 r--s 00000000 03:02 107259 /usr/ConsoleOne/snapins/ice/icewiz.jar
4d8d2000-4d90b000 r--s 00000000 03:02 107311 /usr/ConsoleOne/snapins/ldap/ldap.jar
4d90b000-4d944000 r--s 00000000 03:02 107215 /usr/ConsoleOne/snapins/mach/FS.jar
4d94a000-4d959000 r--s 00000000 03:02 107212 /usr/ConsoleOne/snapins/core/Console.jar
4d959000-4d95a000 r--s 00000000 03:02 107022 /usr/ConsoleOne/resources/core/ConsoleResources.jar
4d95a000-4d95d000 r--s 00000000 03:02 107011 /usr/ConsoleOne/resources/core/ConsoleOneResources.jar
4d95d000-4d974000 r--s 00000000 03:02 107222 /usr/ConsoleOne/snapins/mach/SchMgr.jar
4d974000-4d98d000 r--s 00000000 03:02 107220 /usr/ConsoleOne/snapins/mach/NDSMgr.jar
4d98d000-4d992000 r--s 00000000 03:02 107214 /usr/ConsoleOne/snapins/mach/Editors.jar
4d992000-4d9a2000 r--s 00000000 03:02 107218 /usr/ConsoleOne/snapins/mach/JFS.jar
4d9a2000-4da66000 r--s 00000000 03:02 107219 /usr/ConsoleOne/snapins/mach/MACH.jar
4da66000-4da7e000 r--s 00000000 03:02 107217 /usr/ConsoleOne/snapins/mach/JClientNDS.jar
4da7e000-4da99000 r--s 00000000 03:02 107221 /usr/ConsoleOne/snapins/mach/RBS.jar
4da99000-4daa3000 r--s 00000000 03:02 107216 /usr/ConsoleOne/snapins/mach/JClientFS.jar
4daa3000-4daa4000 r--s 00000000 03:02 107331 /usr/ConsoleOne/snapins/slpda/slpr.jar
4daa4000-4db5f000 r--s 00000000 03:02 107467 /usr/ConsoleOne/snapins/Security/PKI.jar
4db5f000-4db6d000 r--s 00000000 03:02 134804 /usr/ConsoleOne/snapins/GroupWise/GWWebAcc.jar
4db6d000-4dd94000 r--s 00000000 03:02 134800 /usr/ConsoleOne/snapins/GroupWise/GWAdminConfig.jar
4dd94000-4ddbe000 r--s 00000000 03:02 134805 /usr/ConsoleOne/snapins/GroupWise/WAProviders.jar
4ddbe000-4ddfe000 r--s 00000000 03:02 134802 /usr/ConsoleOne/snapins/GroupWise/GWAdminView.jar
4ddfe000-4de2c000 r--s 00000000 03:02 134803 /usr/ConsoleOne/snapins/GroupWise/GWGwia.jar
4de2c000-4de33000 r--s 00000000 03:02 134801 /usr/ConsoleOne/snapins/GroupWise/GWAdminDiag.jar
4de33000-4de72000 r--s 00000000 03:02 134806 /usr/ConsoleOne/snapins/GroupWise/WAServlets.jar
4de72000-4de7b000 r--s 00000000 03:02 107494 /usr/ConsoleOne/snapins/dirxml/rwiz.jar
4de7b000-4de8a000 r--s 00000000 03:02 107493 /usr/ConsoleOne/snapins/dirxml/FilteredReplica.jar
4de8a000-4deb4000 r--s 00000000 03:02 107364 /usr/ConsoleOne/snapins/wanman/WANMAN.jar
4deb4000-4df2c000 r--s 00000000 03:02 146214 /usr/ConsoleOne/snapins/messenger/NVLMessenger.jar
4df2c000-4df4a000 r--s 00000000 03:02 107281 /usr/ConsoleOne/snapins/indxmgr/indexmanager.jar
4df4a000-4df7c000 r--s 00000000 03:02 107001 /usr/ConsoleOne/lib/core/NDSNamespace.jar
4df7c000-4dfc5000 r--s 00000000 03:02 107003 /usr/ConsoleOne/lib/mach/Admin.jar
4dfc5000-4dfd3000 r--s 00000000 03:02 107005 /usr/ConsoleOne/lib/mach/Find.jar
4dfd3000-4dfe7000 r--s 00000000 03:02 107007 /usr/ConsoleOne/lib/mach/SOE.jar
4dfe7000-4dfee000 r--s 00000000 03:02 107008 /usr/ConsoleOne/lib/mach/Security.jar
4dfee000-4e006000 r--s 00000000 03:02 107006 /usr/ConsoleOne/lib/mach/JEditor.jar
4e006000-4e015000 r--s 00000000 03:02 107004 /usr/ConsoleOne/lib/mach/Creator.jar
4e015000-4e040000 r--s 00000000 03:02 107326 /usr/ConsoleOne/lib/slpda/slp.jar
4e040000-4e065000 r--s 00000000 03:02 107463 /usr/ConsoleOne/lib/Security/SecurityServices.jar
4e065000-4e074000 r--s 00000000 03:02 134793 /usr/ConsoleOne/lib/GroupWise/GWAdminNs.jar
4e074000-4e10e000 r--s 00000000 03:02 134798 /usr/ConsoleOne/lib/GroupWise/gwchkhlp.jar
4e10e000-4e14b000 r--s 00000000 03:02 134791 /usr/ConsoleOne/lib/GroupWise/GWAdminCheck.jar
4e14b000-4e158000 r--s 00000000 03:02 134797 /usr/ConsoleOne/lib/GroupWise/WACommon.jar
4e158000-4e199000 r--s 00000000 03:02 134796 /usr/ConsoleOne/lib/GroupWise/GWGwac.jar
4e199000-4e202000 r--s 00000000 03:02 134792 /usr/ConsoleOne/lib/GroupWise/GWAdminLink.jar
4e202000-4e21b000 r--s 00000000 03:02 134795 /usr/ConsoleOne/lib/GroupWise/GWAdminXml.jar
4e21b000-4e23a000 r--s 00000000 03:02 134794 /usr/ConsoleOne/lib/GroupWise/GWAdminSnapinUtil.jar
4e23a000-4e290000 r--s 00000000 03:02 134790 /usr/ConsoleOne/lib/GroupWise/GWAdminCOpts.jar
4e290000-4e293000 r--s 00000000 03:02 107491 /usr/ConsoleOne/lib/dirxml/dirxmljni.jar
4e293000-4e326000 r--s 00000000 03:02 107360 /usr/ConsoleOne/lib/wanman/WanmanAntlr.jar
4e326000-4e32f000 r--s 00000000 03:02 107033 /usr/ConsoleOne/resources/core/NSResources.jar
4e32f000-4e331000 r--s 00000000 03:02 107143 /usr/ConsoleOne/resources/mach/RBSRes.jar
4e331000-4e333000 r--s 00000000 03:02 107165 /usr/ConsoleOne/resources/mach/SOERes.jar
4e333000-4e335000 r--s 00000000 03:02 107110 /usr/ConsoleOne/resources/mach/JFSRes.jar
4e335000-4e336000 r--s 00000000 03:02 107078 /usr/ConsoleOne/resources/mach/FindRes.jar
4e336000-4e339000 r--s 00000000 03:02 107045 /usr/ConsoleOne/resources/mach/AdminRes.jar
4e339000-4e33a000 r--s 00000000 03:02 107056 /usr/ConsoleOne/resources/mach/CreatorRes.jar
4e33a000-4e33d000 r--s 00000000 03:02 107067 /usr/ConsoleOne/resources/mach/FSRes.jar
4e33d000-4e33f000 r--s 00000000 03:02 107176 /usr/ConsoleOne/resources/mach/SchMgrRes.jar
4e33f000-4e341000 r--s 00000000 03:02 107099 /usr/ConsoleOne/resources/mach/JEditorRes.jar
4e341000-4e342000 r--s 00000000 03:02 107089 /usr/ConsoleOne/resources/mach/JClientNDSRes.jar
4e342000-4e344000 r--s 00000000 03:02 107132 /usr/ConsoleOne/resources/mach/NDSMgrRes.jar
4e344000-4e345000 r--s 00000000 03:02 107187 /usr/ConsoleOne/resources/mach/SecurityRes.jar
4e345000-4e349000 r--s 00000000 03:02 107154 /usr/ConsoleOne/resources/mach/ReportingRes.jar
4e349000-4e357000 r--s 00000000 03:02 107121 /usr/ConsoleOne/resources/mach/MACHRes.jar
4e357000-4e35a000 r--s 00000000 03:02 107329 /usr/ConsoleOne/resources/slpda/slprs.jar
4e35a000-4e35b000 r--s 00000000 03:02 107328 /usr/ConsoleOne/resources/slpda/slpi.jar
4e35b000-4e36b000 r--s 00000000 03:02 107465 /usr/ConsoleOne/resources/Security/PKIRes.jar
4e36b000-4e36f000 r--s 00000000 03:02 107362 /usr/ConsoleOne/resources/wanman/WANMANRes.jar
4e36f000-4e370000 r--s 00000000 03:02 107199 /usr/ConsoleOne/resources/widgets/WidgetResources.jar
4e370000-4e43f000 r-xp 00000000 03:02 132877 /usr/ConsoleOne/bin/libgwadj2.so.1
4e43f000-4e44f000 rw-p 000ce000 03:02 132877 /usr/ConsoleOne/bin/libgwadj2.so.1
4e458000-4e706000 r-xp 00000000 03:02 132887 /usr/ConsoleOne/bin/liboff_eng.so.1
4e706000-4e749000 rw-p 002ad000 03:02 132887 /usr/ConsoleOne/bin/liboff_eng.so.1
4e749000-4e7fc000 r-xp 00000000 03:02 132873 /usr/ConsoleOne/bin/libadm_eng.so.1
4e7fc000-4e7fe000 rw-p 000b2000 03:02 132873 /usr/ConsoleOne/bin/libadm_eng.so.1
4e7fe000-4e954000 r-xp 00000000 03:02 132889 /usr/ConsoleOne/bin/libsupp_eng.so.1
4e954000-4e96e000 rw-p 00156000 03:02 132889 /usr/ConsoleOne/bin/libsupp_eng.so.1
4e96e000-4eac6000 r-xp 00000000 03:02 132883 /usr/ConsoleOne/bin/libngwdm.so.1
4eac6000-4eafb000 rw-p 00157000 03:02 132883 /usr/ConsoleOne/bin/libngwdm.so.1
4eafb000-4ec2a000 r-xp 00000000 03:02 132885 /usr/ConsoleOne/bin/libngwflaim.so.1
4ec2a000-4ec47000 rw-p 0012e000 03:02 132885 /usr/ConsoleOne/bin/libngwflaim.so.1
4ec48000-4ec61000 r-xp 00000000 03:02 132891 /usr/ConsoleOne/bin/libsvrtk.so.1
4ec61000-4ec63000 rw-p 00019000 03:02 132891 /usr/ConsoleOne/bin/libsvrtk.so.1
4ec63000-4ecd5000 r-xp 00000000 03:02 132893 /usr/ConsoleOne/bin/libtoolkit.so.1
4ecd5000-4ed5b000 rw-p 00071000 03:02 132893 /usr/ConsoleOne/bin/libtoolkit.so.1
4ed5b000-4edfd000 r-xp 00000000 03:02 23857 /usr/lib/libstdc++.so.5.0.6
4edfd000-4ee13000 rw-p 000a1000 03:02 23857 /usr/lib/libstdc++.so.5.0.6
4ee2b000-4ee32000 r-xp 00000000 03:02 22856 /lib/libgcc_s.so.1
4ee32000-4ee33000 rw-p 00007000 03:02 22856 /lib/libgcc_s.so.1
4ee33000-4ee5f000 r-xp 00000000 03:02 101792 /usr/lib/libJClient.so.1.0.0
4ee5f000-4ee66000 rw-p 0002b000 03:02 101792 /usr/lib/libJClient.so.1.0.0
4ee66000-4eef1000 r-xp 00000000 03:02 101798 /usr/lib/libndssdk.so.1.0.0
4eef1000-4ef0f000 rw-p 0008a000 03:02 101798 /usr/lib/libndssdk.so.1.0.0
4ef2a000-4ef31000 r-xp 00000000 03:02 19821 /lib/tls/librtkaio.so.1
4ef31000-4ef32000 rw-p 00006000 03:02 19821 /lib/tls/librtkaio.so.1
4ef32000-4ef51000 r-xp 00000000 03:02 101806 /usr/lib/libspmclnt.so
4ef51000-4ef54000 rw-p 0001e000 03:02 101806 /usr/lib/libspmclnt.so
4ef54000-4eff6000 r-xp 00000000 03:02 101762 /usr/lib/libccs2.so.2.6.4
4eff6000-4f00a000 rw-p 000a1000 03:02 101762 /usr/lib/libccs2.so.2.6.4
4f00f000-4f025000 r-xp 00000000 03:02 101802 /usr/lib/libsal.so.1.0.0
4f025000-4f02b000 rw-p 00015000 03:02 101802 /usr/lib/libsal.so.1.0.0
4f02b000-4f033000 r-xp 00000000 03:02 19806 /lib/libnss_files.so.2
4f033000-4f034000 rw-p 00008000 03:02 19806 /lib/libnss_files.so.2
4f0b5000-4f0f4000 rw-s 00000000 00:06 1802243 /SYSV00000000 (deleted)
Local Time = Wed Aug 3 00:19:25 2005
Elapsed Time = 42
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_06-b01 mixed mode)R.,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Foreign System Configuration Tab Missing in ConsoleOne
We installed the GroupWise 7 Gateway for Microsoft Exchange SP2 and are trying to configure the gateway. However, we are missing the Foreign System Configuration Tab in ConsoleOne.
We've rerun the install and selected to just install the ConsoleOne snapins, but are still not seeing the Foreign System Configuration tab. I can see the file gwex.jar in the ConsoleOne\1.2\snapins\groupwise folder on the computer I ran the gateway installation from so I think the snapin is installed.
Any help would be appreciated.olsonjm,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Properties DAS object make ConsoleOne hang
Hi,
I just installed the version of NMAS included in iChain 2.3.
I try to get iChain working with tokens, so I created a DAS object. While
asking the properties, ConsoleOne hangs, both on Netware servers as on
Windows clients.
Tried to run ConsoleOne in debug mode, but it hangs right after having
started. Before we had no issues whatsoever with Consoleone.
Tried version 1.3.4, 1.3.5 and 1.3.6 with all exactly the same result.
In NWadmin, I can ask the properties of the DAS object, but in the list
of RADIUS system, "Novell Radius" is not available.
Anyone ever had the same issue?
BartThis indeed did the trick. Thx a million , Scott.
What baffles me, is that this file is available on the NMAS CD in
\Nmas\NmasConsoleOne\RadiusSnapin.zip\
But that it is apparently not installed.
bad Novell, bad!!! ;-)
> Try installing ConsoleOne on your workstation and doing the
administration
> from there. The problem is that the RADIUS snapin uses a rather
inefficient
> method of parsing data our of the RADIUS attribute file (radius.atr),
which
> is located in the ConsoleOne/1.2/bin directory. When you run ConsoleOne
from
> a drive mapped to the server, then access to this file must go over the
> network, and it slows things down considerably.
>
> If running ConsoleOne from the local workstation does not help, then you
> might have a missing or corrupt radius.atr file. You can download the
latest
> version of this file from the support site.
>
> Also, don't administer NMAS RADIUS using NWAdmin. NWAdmin should be used
for
> BMAS 3.7 and earlier only. As you may have already seen, most
administrative
> functions will work from NWAdmin, but things like setting client shared
> secrets and configuring the login rules for your DAS will not work.
> Additionally, because the RADIUS ConsoleOne snapins depend on the NMAS
> snapins, they will only run on Windows. This is because the NMAS snapins
> make native calls to NMASWrap.dll, which is only available on the Windows
> platform.
>
>
> >>> <[email protected]> 5/13/2004 3:36:41 PM >>>
> Hi,
>
> I just installed the version of NMAS included in iChain 2.3.
> I try to get iChain working with tokens, so I created a DAS object.
While
> asking the properties, ConsoleOne hangs, both on Netware servers as on
> Windows clients.
>
> Tried to run ConsoleOne in debug mode, but it hangs right after having
> started. Before we had no issues whatsoever with Consoleone.
> Tried version 1.3.4, 1.3.5 and 1.3.6 with all exactly the same result.
>
> In NWadmin, I can ask the properties of the DAS object, but in the list
> of RADIUS system, "Novell Radius" is not available.
>
> Anyone ever had the same issue?
>
>
> Bart
>
>
> -
We are running Novell Netware 6.0 SP4 and eDirectory 8.6.2. We have set up
iChain 2.3 with the included NMAS and RADIUS services. iChain with NDS
password authentication works properly. Now we are trying to add token
authentication, and it is not working. The RADIUS screen keeps showing
"Access Request Dropped", "<ip address>, <user>, Unknown RADIUS client".
I have turned on debug mode, refreshed the cache, tried logging in again,
and checked the debug file. The error I am getting I have not seen
referenced in previous newsgroup posts. The important section shows this:
Context Lookup List set to:
[2004-08-05 09:42:21 AM] 1) DEN.RJL
[2004-08-05 09:42:21 AM] 2) RJL
[2004-08-05 09:42:21 AM] Number of contexts = 2
[2004-08-05 09:42:21 AM] tag extracted: 10.1.1.242, size: 11, tagLength: 22
[2004-08-05 09:42:21 AM] (->)NDSSetUpClientTable(DAS_RJL.RJL) failed, no
such entry (-601)
[2004-08-05 09:42:21 AM] Cache: Error from NDSSetUpClientTable: failed, no
such entry (-601)
[2004-08-05 09:42:21 AM] Cache: Successfully set up client table
It looks like it is not reading the client table properly, but I don't know
how to fix it. We have recreated the DAS object, removed and re-added the
client address in the DAS object, etc.
If anyone has any ideas on what else we can try, I would really appreciate
it. Thanks.You should always administer NMAS from a Windows workstation, Unfortunately
you can't administer NMAS, and therefore NMAS RADIUS, on any other platform
right now. The NMAS ConsoleOne snapins make native calls to nmaswrap.dll,
and this module is only available on Windows.
You can map a drive to your server from a Windows box and run ConsoleOne
from the mapped drive to see if this works. However, for best results with
RADIUS, you will want to install ConsoleOne locally on a Windows box. When
run over a mapped drive, the RADIUS snapin can take a very long time (5-15
minutes in my experience) to load the RADIUS attribute file.
You mentioned that you've been running ConsoleOne from a workstation, so I
assume that you've tried setting the DAS client information from a Windows
box already. If you have not tried this yet, then please do so.
The -601 you're getting from NMAS_GetLoginConfig is interesting.
Unfortunately this method is implemented in NMAS.NLM, which is maintained by
a different team, so I'm not sure how much more help I can provide with
this. However, I do have a few ideas:
1) When RADIUS calls NMAS_GetLoginConfig, its asking NMAS to read encrypted
data that is stored in attributes on the DAS object. If I remember
correctly, NMAS.NLM cannot go off the box when it does this. Does your
RADIUS server have a local replica that contains the DAS object? If it does
not, then this might be your problem.
2) If putting the DAS in a local replica does not work, then a DS Trace with
the NMAS and Resolve Name options turned on may provide some insight. (I
can't remember if NMAS is a DS Trace option in eDir 8.6 - if you don't see
the NMAS option, then don't worry about it.) Start DSTrace while RADIUS is
running and issue a "radius refreshcache" command like you did before.
If neither of the above suggestions is helpful, then tell the support
engineer you're working with that the -601 error is coming from
NMAS_GetLoginConfig and which version of NMAS.NLM you have. Please also tell
the support engineer that you've been working with me (Scott Kiester) on
this, and that he/she may call me they have any questions.
>>> Stephen Taylor<[email protected]> 08/06/04 12:38 PM >>>
Hi Scott,
Thank you for the follow-up. Based on suggestions from some of your other
posts, I had already run ConsoleOne with the debug window, and I did not
see
any errors when I added a DAS client. I ran the SDIDiag utility and went
through the three recommended steps. There were no errors, and the tree key
looked the same on all our servers. I did not know about the NMAS log file.
I followed your directions, and this is all that the log file shows:
0: Screen and file output started at Fri Aug 6 10:49:53 2004
GetLoginConfig: -601
NMAS_GetLoginConfig: -601
Based on a couple of other posts, I decided to try deleting the DAS object
and recreating it using ConsoleOne from the NMAS server instead of from a
workstation. It asks me for the password when creating the object, then
immediately abends the serve and locks up ConsoleOne. This has happened
three times now, even after reloading the snap-ins. I don't know what to
try
next. We have run dsrepair and it runs cleanly.
"Scott Kiester" <[email protected]> wrote in message
news:_uOQc.4698$8%[email protected]...
> Hi Stephen,
>
> Based on the log snippet that you posted, it appears that an NMAS call is
> failing and returning the -601 error. NMAS RADIUS makes a call to NMAS to
> obtain the client shared secrets because NMAS will encrypt them before
> storing them in eDirectory. It looks like your server is able to read the
> client IP address off of the DAS object, but is unable to obtain the
> corresponding shared secret from NMAS.
>
> I can think of a couple of things that might cause this:
>
> 1) Perhaps ConsoleOne is not storing the shared secret. Unfortunately,
the
> ConsoleOne snapin will not report errors it encounters while storing
entries
> in the client table. ConsoleOne must make an NMAS call to store the
shared
> secret, and if this call fails it will not report the error. You can
usually
> tell if this call failed by closing the DAS "Properties" dialog and
> re-opening it after adding a new entry. If your new entry is not there
when
> the dialog is re-opened, then the call failed.
>
> To find out if this call is failing, please start ConsoleOne with the
> following command line: "consoleone -debug -windowout". This will make
> ConsoleOne display a debug window in the top-left portion of your screen.
If
> an error occurs when you add a DAS client, you will see an error code and
> stack dump in this window. If this happens, please post the error code
and
> stack dump.
>
> Problems with the tree key are the most common reason for this call to
fail.
> You can resolve tree key issues using the SDIDIAG utility, which is
> available from the support site.
>
> 2) It is unusual to get a -601 ("object not found" - this is _not_ the
same
> as "attribute not found") error when RADIUS attempts to make this NMAS
call.
> RADIUS must set up and log in a new DS context before it calls NMAS here.
> It's possible that this is where the failure is, but I think it's
unlikely.
> The -601 error is probably coming from the NMAS call. If you determine
that
> ConsoleOne is storing this data properly using the instructions in step
1,
> then it would be helpful to see a log file from NMAS when this call is
made.
> To get this log file, please do the following:
>
> A) Load RADIUS and provide the DAS name and password
> B) At the server console, type "nmasmon * sys:\etc\nmasmon.log"
> C) At the server console, type "radius refreshcache"
> D) At the server console, type "unload nmasmon"
>
> This will cause NMAS log information to be written to
sys:\etc\nmasmon.log.
> Please post this file here, or send it to me at [email protected].
> -
Missing the User Extensible Policy
Hello,
I don't know if this is the right forum.
We are missing the User Extensible Policy when we are creating a User
Policy packet
When we create a new User Policy packet we have all the options except the
User Extensible Policy. We need this to redirect folders. We did this on
other networks without any problems.
Network:
Netware 5.1 sp6
Zen 3.2 sp2
Tested on:
Windows 2000 (NwClient 4.83 sp1 and sp3)
Windows 98 (NwClient 3.21)
ConsoleOne 1.3.3
ConsoleOne 1.3.5
The pcs and the servers are the same on every network.
Greets,
Bert Nieuwenampsen
[email protected]
ROC Twente Plus
Dr. D.H. Groen Collegebnieuwenampsen,
> Is not a ConsoleOne snapin that we are missing, because we copied the
> Consoleone from the 'working' network.
>
> How can we check witch snapin is installed on the server ? We checked
> NWconfig view install products, and they are the same.
In consoleone you would go to help and then snapins, but that can be
very confusing.
Easiest way would be to download the snapins from novell.
download.novell.com under products select zenworks for desktops from
there you can get the 3.2 snap-ins.
Extract the download and copy the snap-ins to your c1 copy, it would be
best if you were running c1 local on your workstation.
Q, when you copied c1 from the working location, did you copy the whole
1.2 directory to your desired location?
Jared L Jennings
Novell Support Forums SysOp
Using XanaNews 1.16.3.1 -
Radius / NMAS / BM / Ichain
Hello,
i have the following Setup:
1x Single Tree Server with Nw 6.5 SP1a / BM3.8 SP2
This is a simple authentication Server which is placed in our dmz. Some users are synchronized with dirxml from the productive main tree to the authentication tree.
Primary this box is used for client2site vpn with vasco digipass tokens. This setup is working.
Now i wish to use the same box for ichain Radius authentication.
I have setup a 2nd box in the dmz for ichain 2.3. I have made the necessary schema extension on the Authentication server and installed the snapins for ichain.
I tested authentication with ldap to the authentication server.... no problem
Now the problems:
I setup a authentication profile on the ichain server for radius
I configured the authentication servers lpo and radius objects. All this is described in the ichain admin book page 89 (chapter 7 using radius authentication)
When i check the radius console i get the following message:
[DATE TIME] Access Request Dropped
IchainIP, cn, Unknown Radius client
What i did again: I found several tid's where the problem is described. I Changed rights to the lpo, installed the nmas234.tar, changed userprops.....but till now nothing works.
MoreSysinfos:
Radius.nlm V 4.14 / 6.March 2003
nmas.nlm 2.68 / 17.June 2004
nmasldap.nlm V 1.20 / 31.March 2004
Here the RadiusDebugLog, during authentication:
[2004-08-09 02:42:40 PM] Deleting file "sys:etc\radius\log\20040802.log", failed
[2004-08-09 02:42:40 PM] Parameter count = 1
[2004-08-09 02:42:40 PM] argv[0] = SYS:\SYSTEM\RADIUS.NLM
[2004-08-09 02:42:40 PM] Tree Name = "<null>"
[2004-08-09 02:42:40 PM] Login Name = "<null>"
[2004-08-09 02:42:40 PM] Name = "<null>"
[2004-08-09 02:42:40 PM] Workers = 0
[2004-08-09 02:42:40 PM] Port = 0
[2004-08-09 02:42:40 PM] Error encountered = 0
[2004-08-09 02:42:40 PM] Checking if parameters are to be retrieved from Registry
[2004-08-09 02:42:40 PM] Got Tree Name from registry, "<null>"
[2004-08-09 02:42:40 PM] Got Login Name from registry, "<null>"
[2004-08-09 02:42:40 PM] Got Service Name from registry, "<null>"
[2004-08-09 02:42:40 PM] Got Number Threads from registry, 5
[2004-08-09 02:42:40 PM] Got Service Port from registry, 1645
[2004-08-09 02:42:40 PM] Got Accounting Port from registry, 1646
[2004-08-09 02:42:40 PM] Got Accounting Path from registry, "sys:\etc\radius\acct"
[2004-08-09 02:42:40 PM] Got Accounting File Format from registry, "comma"
[2004-08-09 02:42:40 PM] Got RollOver from registry, "daily"
[2004-08-09 02:42:40 PM] Services supported, [2004-08-09 02:42:40 PM] "authentication" [2004-08-09 02:42:40 PM] "accounting" [2004-08-09 02:42:40 PM]
[2004-08-09 02:42:40 PM] Got Accounting Attribute File from registry, sys:\etc\radius\radacct.atr
[2004-08-09 02:42:40 PM] Got Authentication Path from registry, sys:etc\radius
[2004-08-09 02:43:03 PM] Debug logging enabled to file sys:etc\radius\debug\raddbg.log
[2004-08-09 02:43:17 PM] 1) [(ip) 62.200.168.121:1812], Received 43 Bytes (Access-Request (1))
[2004-08-09 02:43:17 PM] [(total=1) (p=0) (d=0) (r=0) (acc=0) (rej=0)]
[2004-08-09 02:43:17 PM] <2> Done GetNextMessage [(ip) 62.200.168.121:1812]: time:208207
[2004-08-09 02:43:17 PM] -------- START : (Access-Request (1)) [(ip) 62.200.168.121:1812]: time:-35971301---
[2004-08-09 02:43:17 PM] CACHE: CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-09 02:43:17 PM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-09 02:43:17 PM] CACHE: CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-09 02:43:17 PM] HandleLocalRequest(), CacheReadSecretForNASAddress failed, no such RADIUS client (-822), Packet Dropped
[2004-08-09 02:43:17 PM] -------- END : (Access-Request (1)) [(ip) 62.200.168.121:1812]: time:-35971299---
[2004-08-09 02:43:23 PM] 2) [(ip) 62.200.168.121:1812], Received 43 Bytes (Access-Request (1))
[2004-08-09 02:43:23 PM] [(total=2) (p=1) (d=0) (r=0) (acc=0) (rej=0)]
[2004-08-09 02:43:23 PM] <3> Done GetNextMessage [(ip) 62.200.168.121:1812]: time:266774
[2004-08-09 02:43:23 PM] -------- START : (Access-Request (1)) [(ip) 62.200.168.121:1812]: time:-35912704---
[2004-08-09 02:43:23 PM] CACHE: CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-09 02:43:23 PM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-09 02:43:23 PM] CACHE: CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-09 02:43:23 PM] HandleLocalRequest(), CacheReadSecretForNASAddress failed, no such RADIUS client (-822), Packet Dropped
[2004-08-09 02:43:23 PM] -------- END : (Access-Request (1)) [(ip) 62.200.168.121:1812]: time:-35912701---
[2004-08-09 02:48:42 PM] (->)Cacher: NWDSReadObjectInfo(ichaindas.ichain.netstal), succeeded, time:2
Thanks
StefanIt's working now.
The Problem was the LPO. In the LoginSequences tab i have modified the standard digipass entry and added a
NDS entry. This was necessary for BM3.8 VPN Logins in our environment.
So I createt a new one, with only digipass inside and associate this LoginSequence to the Radius DAS.
Have a nice time
Stefan
>>> Scott Kiester<[email protected]> 11.08.04 22:21 >>>
You can't execute two login sequences with RADIUS, because there is no way
for RADIUS to prompt for a second set of credentials over the PAP or CHAP
protocols. The ConsoleOne snapin should not be allowing you to mark more
than one sequence as mandatory, as this configuration is invalid.
The recommended way of supporting multiple methods through RADIUS is by
creating a single NMAS "OR" login sequence, rather than using multiple
rules. You could create a sequence that specified "NDS" OR "Digipass." In
this case RADIUS would first execute the NDS method, and only execute the
Digipass method if NDS fails.
I realize that you want to require NDS AND Digipass, not NDS OR Digipass. A
login sequence that specifies NDS AND Digipass would always fail, because
the password supplied by the user would never be valid for both methods.
Unfortunately, there is not a way to require both NDS and Digipass through
RADIUS.
>>> Stefan Winterberg<[email protected]> 08/11/04 2:43 AM >>>
Hello Scott,
thank you very much. it seems that your eyes are better than ours.
The unknown client is now gone, but we still have some problems.
I have the new raddbg and nmasmon-log file below.
We have set the Sequences in the LPO for this DAS-Object to:
NDS Mandatory
Digipass Mandatory
On the UserObject the DefaultLoginClearance is set to password&token.
When we attemp to login we can see that the vasco digipass successfull login
counter is incremented by 1.
--Raddbg.log------------------------------
[2004-08-11 10:38:36 AM] Debug logging enabled to file
sys:etc\radius\debug\raddbg.log
[2004-08-11 10:38:42 AM] Cacher: Console initiated rebuild of cache
[2004-08-11 10:38:42 AM] (->)Cacher:
NWDSReadObjectInfo(ichaindas.ichain.netstal), succeeded, time:3
[2004-08-11 10:38:42 AM] Cacher: Rebuilding cache, mod time different,
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:DAS Version)
succeeded, time:2
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Password Policy)
failed, no such attribute (-603), time:2
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Common Name
Resolution) succeeded, time:2
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Concurrent Limit)
failed, no such attribute (-603), time:1
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Interim Accting
Timeout) failed, no such attribute (-603), time:2
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Aged Interval)
failed, no such attribute (-603), time:2
[2004-08-11 10:38:42 AM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Maximum History
Record) failed, no such attribute (-603), time:1
[2004-08-11 10:38:42 AM] CACHE: Use Netware Password for
"ichaindas.ichain.netstal": Enabled
[2004-08-11 10:38:42 AM] CACHE: CN Login for "ichaindas.ichain.netstal":
Enabled
[2004-08-11 10:38:42 AM] CACHE: Concurrent Limit for
"ichaindas.ichain.netstal": 0x80000000
[2004-08-11 10:38:42 AM] CACHE: Interim Timeout for
"ichaindas.ichain.netstal": 10 minutes
[2004-08-11 10:38:42 AM] CACHE: Interval For Aging for
"ichaindas.ichain.netstal": 7 days
[2004-08-11 10:38:42 AM] CACHE: Max History Record for
"ichaindas.ichain.netstal": 30
[2004-08-11 10:38:42 AM]
Context Lookup List set to:
[2004-08-11 10:38:42 AM] 1) USERS.NETSTAL
[2004-08-11 10:38:42 AM] Number of contexts = 1
[2004-08-11 10:38:42 AM] tag extracted: 62.200.168.121, size: 15, tagLength:
30
[2004-08-11 10:38:42 AM] Cache: Successfully set up client table
[2004-08-11 10:38:42 AM]
(->)NDSSetUpContextList(ichaindas.ichain.netstal), ProxyContext is empty
[2004-08-11 10:38:42 AM] Cache: Successfully set up context list
[2004-08-11 10:38:42 AM] (->)NDSSetUpDomainList(ichaindas.ichain.netstal),
Domain list is empty.
[2004-08-11 10:38:42 AM] Cache: Successfully set up domain list
[2004-08-11 10:38:42 AM] Cache: Successfully set up search domain list
[2004-08-11 10:38:42 AM] Cache: Successfully build context list
[2004-08-11 10:38:42 AM] CACHE: Cache reloaded at [2004-08-11 10:38:42
AM], current reload count is 5
[2004-08-11 10:38:42 AM] Cacher: RefreshCache(), succeeded
[2004-08-11 10:38:42 AM] CACHE: Cache loaded at [2004-08-11 10:38:11 AM]
has been discarded , current reload count is 5
[2004-08-11 10:38:57 AM] 7) [(ip) 62.200.168.121:1812], Received 43 Bytes
(Access-Request (1))
[2004-08-11 10:38:57 AM] [(total=7) (p=6) (d=0) (r=0) (acc=0) (rej=0)]
[2004-08-11 10:38:57 AM] <3> Done GetNextMessage [(ip) 62.200.168.121:1812]:
time:7776133
[2004-08-11 10:38:57 AM] -------- START : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:1545446252---
[2004-08-11 10:38:57 AM] CACHE:
CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-11 10:38:57 AM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-11 10:38:57 AM] CACHE:
CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-11 10:38:57 AM] CACHE:
CacheGetEnableCNLogin(ichaindas.ichain.netstal), using cache
[2004-08-11 10:38:57 AM] CacheGetDNForName(wst), Using cache
[2004-08-11 10:38:57 AM] (->)CacheGetDNForName:NWDSReadObjectInfo(wst),
succeeded, time:9
[2004-08-11 10:38:57 AM] userName: wst
[2004-08-11 10:38:57 AM] userDN: WST.USERS.NETSTAL
[2004-08-11 10:38:57 AM]
(->)NDSVerifyAttr:NWDSRead(WST.USERS.NETSTAL,RADIUS: Dial Access Group)
succeeded, time:3
[2004-08-11 10:38:57 AM] (->)NWDSCompare:(WST.USERS.NETSTAL) succeeded,
time:2
[2004-08-11 10:38:57 AM] (->)NWDSRead(WST.USERS.NETSTAL,RADIUS Enable
Attr) failed, no such attribute (-603), time:2
[2004-08-11 10:38:57 AM] (->)User "WST.USERS.NETSTAL", Looking in
(USERS.NETSTAL) for (RADIUS:Enable Dial Access)
[2004-08-11 10:38:57 AM] (->)NWDSRead(USERS.NETSTAL,RADIUS Enable Attr)
succeeded, time:2
[2004-08-11 10:38:57 AM] User Name: wst, User DN: WST.USERS.NETSTAL,
Domain: , Service Tag:
[2004-08-11 10:38:57 AM] (->)NADMAuthRequest()
[2004-08-11 10:38:57 AM] (->)NADMAuthRequest(WST.USERS.NETSTAL) failed,
-1642 (0xfffff996), time:1776
[2004-08-11 10:38:57 AM] (->)Authenticate (0 policy, NDS pswd) (for
WST.USERS.NETSTAL), failed, -1642 (0xfffff996)
[2004-08-11 10:38:57 AM] (->)Authentication FAILED
[2004-08-11 10:38:57 AM] ->Sending Access-Reject (3) [(ip)
62.200.168.121(1812)] count=20
[2004-08-11 10:38:57 AM] ->Inserting into RespQ , code(3) id(6).
[2004-08-11 10:38:57 AM] -------- END : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:1545448063---
----nmasmon.log-------------------------------------------------------------
NMAS Enterprise Edition
0: Screen and file output started at Wed Aug 11 10:37:47 2004
GetLoginConfig: 0
NMAS_GetLoginConfig: 0
GetLoginConfig: 0
NMAS_GetLoginConfig: 0
GetLoginConfig: 0
NMAS_GetLoginConfig: 0
4: Destroy NMAS Session for reuse
4: Create NMAS Session
4: RemoteCheckIfLocalUser checking WST.USERS.NETSTAL.
4: RemoteCheckIfLocalUser is a local user.
4: Server thread started
4: NMAS_CanDo StartClientSession 0
4: >>ClientPut: message size=8 queue Size 0
4: >>ClientPut: message size=35 queue Size 8
4: NMAS_CanDo sendMessage 0
4: <<ClientGet: message size=8 queue Size 0
4: >>ServerGet: message size=8 queue size 0
4: >>ServerGet: message size=35 queue size 35
4: CanDo
4: Sequence Selected == "Digipass"
4: Login Method 0x00000050
4: MAF_Begin LSM 0x00000050
4: <<ServerPut: message size=8 queue size 0
4: <<ServerPut: message size=5 queue size 8
4: MAF_GetAttribute LSM 0x00000050 AID: 1 Value: WST.USERS.NETSTAL
4: <<ClientGet: message size=5 queue Size 0
4: NMAS_CanDo sendMessage 0
4: NMAS_CanDo disassembleDoPacket 0
4: MAF_Begin LCM 0x00000050
4: MAF_XRead LCM 0x00000050
4: <<ClientGet: message size=8 queue Size 0
4: MAF_GetAttribute LSM 0x00000050 AID: 22 Tag: digipass
4: MAF_XWrite LSM 0x00000050
4: <<ServerPut: message size=8 queue size 0
4: <<ServerPut: message size=60 queue size 8
4: MAF_XRead LSM 0x00000050
4: >>ServerGet: message size=8 queue size 0
4: <<ClientGet: message size=60 queue Size 0
4: MAF_GetAttribute LCM 0x00000050 AID: 6
4: MAF_XWrite LCM 0x00000050
4: >>ClientPut: message size=8 queue Size 0
4: >>ClientPut: message size=29 queue Size 8
4: MAF_XRead LCM 0x00000050
4: <<ClientGet: message size=8 queue Size 0
4: >>ServerGet: message size=29 queue size 0
4: MAF_PutAttribute LSM 0x00000050 AID: 22 Tag: digipass
4: MAF_XWrite LSM 0x00000050
4: <<ServerPut: message size=8 queue size 0
4: <<ServerPut: message size=16 queue size 8
4: MAF_End LSM 0x00000050 successful
4: >>ServerGet: message size=8 queue size 0
4: <<ClientGet: message size=16 queue Size 0
4: MAF_End LCM 0x00000007
4: >>ClientPut: message size=8 queue Size 0
4: <<ClientGet: message size=8 queue Size 0
4: WhatNext
4: Login Method 0x00000007
4: MAF_GetAttribute LSM 0x00000007 AID: 2
4: MAF_GetAttribute LSM 0x00000007 AID: 1 Value: WST.USERS.NETSTAL
4: MAF_Begin LSM 0x00000007
4: <<ServerPut: message size=8 queue size 0
4: <<ServerPut: message size=5 queue size 8
4: MAF_AllowPasswordSet LSM 0x00000007
4: MAF_GetPassword LSM 0x00000007
4: MAF_Write LSM 0x00000007
4: <<ServerPut: message size=8 queue size 5
4: <<ServerPut: message size=40 queue size 13
4: MAF_GetNDSPasswordHash LSM 0x00000007
4: MAF_XWrite LSM 0x00000007
4: <<ServerPut: message size=8 queue size 53
4: <<ServerPut: message size=36 queue size 61
4: MAF_XRead LSM 0x00000007
4: >>ServerGet: message size=8 queue size 0
4: <<ClientGet: message size=5 queue Size 0
4: MAF_Begin LCM 0x00000007
4: MAF_GetAttribute LCM 0x00000007 AID: 6
4: MAF_GetAttribute LCM 0x00000007 AID: 1 Value: WST.USERS.NETSTAL
4: MAF_Read LCM 0x00000007
4: <<ClientGet: message size=8 queue Size 92
4: <<ClientGet: message size=40 queue Size 84
4: MAF_XRead LCM 0x00000007
4: <<ClientGet: message size=8 queue Size 44
4: <<ClientGet: message size=36 queue Size 36
4: MAF_XWrite LCM 0x00000007
4: >>ClientPut: message size=8 queue Size 0
4: >>ClientPut: message size=56 queue Size 8
4: MAF_XRead LCM 0x00000007
4: <<ClientGet: message size=8 queue Size 0
4: >>ServerGet: message size=56 queue size 0
4: MAF_GetNDSPasswordHash LSM 0x00000007
4: MAF_XWrite LSM 0x00000007
4: <<ServerPut: message size=8 queue size 0
4: <<ServerPut: message size=32 queue size 8
4: MAF_End LSM 0x00000007 failed
4: ERROR: -1642 Login Method
4: ERROR: -1642 WhatNext
4: ERROR: -1642 NMAS Manager
4: <<ServerPut: message size=8 queue size 32
4: <<ServerPut: message size=4 queue size 40
4: >>ServerGet: message size=8 queue size 0
4: <<ClientGet: message size=32 queue Size 0
4: MAF_Write LCM 0x00000007
4: >>ClientPut: message size=8 queue Size 0
4: >>ClientPut: message size=12 queue Size 8
4: MAF_End LCM 0x00000007
4: >>ClientPut: message size=8 queue Size 12
4: <<ClientGet: message size=8 queue Size 12
4: <<ClientGet: message size=4 queue Size 4
4: >>ClientPut: message size=8 queue Size 20
4: <<ClientGet: message size=8 queue Size 0
4: >>ServerGet: message size=12 queue size 0
4: >>ServerGet: message size=8 queue size 16
4: >>ServerGet: message size=8 queue size 8
4: <<ServerPut: message size=8 queue size 0
4: Server thread exited
4: Client Session Destroy Request
4: Local Session Cleared (Not Destroyed)
Thanks
>>> Scott Kiester<[email protected]> 10.08.04 19:14 >>>
It looks like you transposed the middle two octets in the client IP
address.
Here's what RADIUS.NLM is reading out of the client table:
[2004-08-10 04:44:21 PM] tag extracted: 62.168.200.121, size: 15,
tagLength:
30
And here's the access-request:
[2004-08-10 04:45:32 PM] -------- START : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:901386806---
>>> Stefan Winterberg<[email protected]> 08/10/04 8:52 AM >>>
Hello Scott,
there is no problem with the tree key. ConsoleOne can add , remove and
modify these properties.
here the actual raddbg.log:
[2004-08-10 04:44:21 PM] Cacher: Console initiated rebuild of cache
[2004-08-10 04:44:21 PM] (->)Cacher:
NWDSReadObjectInfo(ichaindas.ichain.netstal), succeeded, time:2
[2004-08-10 04:44:21 PM] Cacher: Rebuilding cache, mod time different,
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:DAS Version)
succeeded, time:3
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Password Policy)
failed, no such attribute (-603), time:2
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Common Name
Resolution) succeeded, time:2
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Concurrent Limit)
failed, no such attribute (-603), time:1
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Interim Accting
Timeout) failed, no such attribute (-603), time:2
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Aged Interval)
failed, no such attribute (-603), time:2
[2004-08-10 04:44:21 PM]
(->)NDSReadData:NWDSRead(ichaindas.ichain.netstal,RA DIUS:Maximum History
Record) failed, no such attribute (-603), time:2
[2004-08-10 04:44:21 PM] CACHE: Use Netware Password for
"ichaindas.ichain.netstal": Enabled
[2004-08-10 04:44:21 PM] CACHE: CN Login for "ichaindas.ichain.netstal":
Enabled
[2004-08-10 04:44:21 PM] CACHE: Concurrent Limit for
"ichaindas.ichain.netstal": 0x80000000
[2004-08-10 04:44:21 PM] CACHE: Interim Timeout for
"ichaindas.ichain.netstal": 10 minutes
[2004-08-10 04:44:21 PM] CACHE: Interval For Aging for
"ichaindas.ichain.netstal": 7 days
[2004-08-10 04:44:21 PM] CACHE: Max History Record for
"ichaindas.ichain.netstal": 30
[2004-08-10 04:44:21 PM]
Context Lookup List set to:
[2004-08-10 04:44:21 PM] 1) USERS.NETSTAL
[2004-08-10 04:44:21 PM] Number of contexts = 1
[2004-08-10 04:44:21 PM] tag extracted: 62.168.200.121, size: 15,
tagLength:
30
[2004-08-10 04:44:21 PM] Cache: Successfully set up client table
[2004-08-10 04:44:21 PM]
(->)NDSSetUpContextList(ichaindas.ichain.netstal), ProxyContext is empty
[2004-08-10 04:44:21 PM] Cache: Successfully set up context list
[2004-08-10 04:44:21 PM]
(->)NDSSetUpDomainList(ichaindas.ichain.netstal),
Domain list is empty.
[2004-08-10 04:44:21 PM] Cache: Successfully set up domain list
[2004-08-10 04:44:21 PM] Cache: Successfully set up search domain list
[2004-08-10 04:44:21 PM] Cache: Successfully build context list
[2004-08-10 04:44:21 PM] CACHE: Cache reloaded at [2004-08-10 04:44:21
PM], current reload count is 5
[2004-08-10 04:44:21 PM] Cacher: RefreshCache(), succeeded
[2004-08-10 04:44:21 PM] CACHE: Cache loaded at [2004-08-10 04:43:05 PM]
has been discarded , current reload count is 5
[2004-08-10 04:45:21 PM] (->)Cacher:
NWDSReadObjectInfo(ichaindas.ichain.netstal), succeeded, time:1
[2004-08-10 04:45:32 PM] 15) [(ip) 62.200.168.121:1812], Received 43 Bytes
(Access-Request (1))
[2004-08-10 04:45:32 PM] [(total=15) (p=14) (d=0) (r=0) (acc=0)
(rej=0)]
[2004-08-10 04:45:32 PM] <6> Done GetNextMessage [(ip)
62.200.168.121:1812]:
time:124205589
[2004-08-10 04:45:32 PM] -------- START : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:901386806---
[2004-08-10 04:45:32 PM] CACHE:
CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-10 04:45:32 PM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-10 04:45:32 PM] CACHE:
CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-10 04:45:32 PM] HandleLocalRequest(),
CacheReadSecretForNASAddress
failed, no such RADIUS client (-822), Packet Dropped
[2004-08-10 04:45:32 PM] -------- END : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:901386809---
[2004-08-10 04:45:38 PM] 16) [(ip) 62.200.168.121:1812], Received 43 Bytes
(Access-Request (1))
[2004-08-10 04:45:38 PM] [(total=16) (p=15) (d=0) (r=0) (acc=0)
(rej=0)]
[2004-08-10 04:45:38 PM] <2> Done GetNextMessage [(ip)
62.200.168.121:1812]:
time:124022378
[2004-08-10 04:45:38 PM] -------- START : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:901444855---
[2004-08-10 04:45:38 PM] CACHE:
CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-10 04:45:38 PM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-10 04:45:38 PM] CACHE:
CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-10 04:45:38 PM] HandleLocalRequest(),
CacheReadSecretForNASAddress
failed, no such RADIUS client (-822), Packet Dropped
[2004-08-10 04:45:38 PM] -------- END : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:901444857---
Thanks
Stefan
>>> Scott Kiester<[email protected]> 10.08.04 01:07 >>>
You might have a problem with the tree key in your environment. First of
all, make sure that ConosleOne is storing the client data. After you add a
new entry to the client table on your DAS, close the DAS properties dialog
and re-open it. If the new client is not there when you re-open the dialog,
then ConsoleOne may have been unable to save the data due to a problem with
the tree key. You can confirm this by executing ConsoleOne with the
following command line: "consoleone -debug -windowout". This will make
ConsoleOne display a debug window in the top-left portion of your screen.
If
there is a problem saving the client data, then ConsoleOne will display an
exception and an error code in this window. If the error is in the -14xx
range, (-1460 and -1418 are most common) then you most likely have a
problem
with your tree key.
If ConsoleOne is saving the data correctly, then you'll need to see what is
happening when RADIUS.NLM reads this data. To do this, issue a "radius
refreshcache" command at the server console after you enable debug logging.
Please post this file here and I'll take a look at it.
Tree key problems can be corrected with SDIDIAG, which IIRC is available as
a free download from the support site.
>>> Stefan Winterberg<[email protected]> 08/09/04 8:16 AM >>>
Hello,
i have the following Setup:
1x Single Tree Server with Nw 6.5 SP1a / BM3.8 SP2
This is a simple authentication Server which is placed in our dmz. Some
users are synchronized with dirxml from the productive main tree to the
authentication tree.
Primary this box is used for client2site vpn with vasco digipass tokens.
This setup is working.
Now i wish to use the same box for ichain Radius authentication.
I have setup a 2nd box in the dmz for ichain 2.3. I have made the necessary
schema extension on the Authentication server and installed the snapins for
ichain.
I tested authentication with ldap to the authentication server.... no
problem
Now the problems:
I setup a authentication profile on the ichain server for radius
I configured the authentication servers lpo and radius objects. All this is
described in the ichain admin book page 89 (chapter 7 using radius
authentication)
When i check the radius console i get the following message:
[DATE TIME] Access Request Dropped
IchainIP, cn, Unknown Radius client
What i did again: I found several tid's where the problem is described. I
Changed rights to the lpo, installed the nmas234.tar, changed
userprops.....but till now nothing works.
MoreSysinfos:
Radius.nlm V 4.14 / 6.March 2003
nmas.nlm 2.68 / 17.June 2004
nmasldap.nlm V 1.20 / 31.March 2004
Here the RadiusDebugLog, during authentication:
[2004-08-09 02:42:40 PM] Deleting file "sys:etc\radius\log\20040802.log",
failed
[2004-08-09 02:42:40 PM] Parameter count = 1
[2004-08-09 02:42:40 PM] argv[0] = SYS:\SYSTEM\RADIUS.NLM
[2004-08-09 02:42:40 PM] Tree Name = "<null>"
[2004-08-09 02:42:40 PM] Login Name = "<null>"
[2004-08-09 02:42:40 PM] Name = "<null>"
[2004-08-09 02:42:40 PM] Workers = 0
[2004-08-09 02:42:40 PM] Port = 0
[2004-08-09 02:42:40 PM] Error encountered = 0
[2004-08-09 02:42:40 PM] Checking if parameters are to be retrieved from
Registry
[2004-08-09 02:42:40 PM] Got Tree Name from registry, "<null>"
[2004-08-09 02:42:40 PM] Got Login Name from registry, "<null>"
[2004-08-09 02:42:40 PM] Got Service Name from registry, "<null>"
[2004-08-09 02:42:40 PM] Got Number Threads from registry, 5
[2004-08-09 02:42:40 PM] Got Service Port from registry, 1645
[2004-08-09 02:42:40 PM] Got Accounting Port from registry, 1646
[2004-08-09 02:42:40 PM] Got Accounting Path from registry,
"sys:\etc\radius\acct"
[2004-08-09 02:42:40 PM] Got Accounting File Format from registry,
"comma"
[2004-08-09 02:42:40 PM] Got RollOver from registry, "daily"
[2004-08-09 02:42:40 PM] Services supported, [2004-08-09 02:42:40 PM]
"authentication" [2004-08-09 02:42:40 PM] "accounting" [2004-08-09
02:42:40
PM]
[2004-08-09 02:42:40 PM] Got Accounting Attribute File from registry,
sys:\etc\radius\radacct.atr
[2004-08-09 02:42:40 PM] Got Authentication Path from registry,
sys:etc\radius
[2004-08-09 02:43:03 PM] Debug logging enabled to file
sys:etc\radius\debug\raddbg.log
[2004-08-09 02:43:17 PM] 1) [(ip) 62.200.168.121:1812], Received 43 Bytes
(Access-Request (1))
[2004-08-09 02:43:17 PM] [(total=1) (p=0) (d=0) (r=0) (acc=0) (rej=0)]
[2004-08-09 02:43:17 PM] <2> Done GetNextMessage [(ip)
62.200.168.121:1812]:
time:208207
[2004-08-09 02:43:17 PM] -------- START : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:-35971301---
[2004-08-09 02:43:17 PM] CACHE:
CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-09 02:43:17 PM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-09 02:43:17 PM] CACHE:
CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-09 02:43:17 PM] HandleLocalRequest(),
CacheReadSecretForNASAddress
failed, no such RADIUS client (-822), Packet Dropped
[2004-08-09 02:43:17 PM] -------- END : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:-35971299---
[2004-08-09 02:43:23 PM] 2) [(ip) 62.200.168.121:1812], Received 43 Bytes
(Access-Request (1))
[2004-08-09 02:43:23 PM] [(total=2) (p=1) (d=0) (r=0) (acc=0) (rej=0)]
[2004-08-09 02:43:23 PM] <3> Done GetNextMessage [(ip)
62.200.168.121:1812]:
time:266774
[2004-08-09 02:43:23 PM] -------- START : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:-35912704---
[2004-08-09 02:43:23 PM] CACHE:
CacheDomainListExist(ichaindas.ichain.netstal), using cache
[2004-08-09 02:43:23 PM] AuthRequestHandler(), Calling RequestHandler.
[2004-08-09 02:43:23 PM] CACHE:
CacheReadSecretForNASAddress(ichaindas.ichain.nets tal), using cache
[2004-08-09 02:43:23 PM] HandleLocalRequest(),
CacheReadSecretForNASAddress
failed, no such RADIUS client (-822), Packet Dropped
[2004-08-09 02:43:23 PM] -------- END : (Access-Request (1)) [(ip)
62.200.168.121:1812]: time:-35912701---
[2004-08-09 02:48:42 PM] (->)Cacher:
NWDSReadObjectInfo(ichaindas.ichain.netstal), succeeded, time:2
Thanks
Stefan -
we have Nw6.5 SP2 with radius files from ichain 2.3 CD(overwrite all)
with the nmas patch
nmas V2.6.8
radius v4.15
problems:
1.were getting radius client unknown (radius nlm does load but wont
unload, just hangs)
2. i can only get nwadmin to save the client details in the DAS object
C1 just wont save it- ive tried V136c,136,135 and the server version
which errors with
"waiting for reading vendor list from attribute file" however the
radius.atr file does exist
3. not sure if this is relevant here but vasco token wont assign to a user
errors with "unable to write configuration data"
thanks for helpwell for no reason at all it started working with C1 locally 2 days later !
weird
Also if I assign a DAS object to a container and all users underneath are
told to inherit the DAS from the container settings
then I wont have to configure each user object ? This doesnt sem to inherit
for some reason.
Is the Radus.nlm form the ichain 2.3 auth CD good enough for a NW6.5 SP2
server or is
there an update
Thanks?
"Scott Kiester" <[email protected]> wrote in message
news:bYq%[email protected]...
> Your first and third items could be due to an inconsistent or missing tree
> key. You can use SDIDIAG to troubleshoot and correct tree key issues.
> SDIDIAG is available as a free download from the support site.
>
> Your second issue is due to a bug in the RADIUS ConsoleOne snapin. The
> problem should go away if you run ConsoleOne from your local workstation,
> instead of running it from a drive mapped to the server. The snapin uses a
> very inefficient method of parsing the radius.atr file, which requires it
to
> do several seeks for each record that is processed. When ConsoleOne has to
> go over the network to access the file, it can take a very long time to
> parse (10-15 minutes in my experience).
>
> Also, don't administer NMAS RADIUS with NWAdmin. NWAdmin is for BMAS 3.7
and
> older BMAS servers only. (BMAS 3.8 is NMAS RADIUS, and therefore uses
> ConsoleOne.)
>
> >>> <[email protected]> 09/07/04 7:12 AM >>>
> we have Nw6.5 SP2 with radius files from ichain 2.3 CD(overwrite all)
> with the nmas patch
> nmas V2.6.8
> radius v4.15
>
> problems:
> 1.were getting radius client unknown (radius nlm does load but wont
> unload, just hangs)
> 2. i can only get nwadmin to save the client details in the DAS object
> C1 just wont save it- ive tried V136c,136,135 and the server version
> which errors with
> "waiting for reading vendor list from attribute file" however the
> radius.atr file does exist
> 3. not sure if this is relevant here but vasco token wont assign to a user
> errors with "unable to write configuration data"
>
> thanks for help
>
> -
I have 3 different ones set up. I'm working with Novell as far as
getting any changes to affect *all* emails without doing post office
rebuild, but I have another issue I'd like to see about getting some
help.
I can't seem to get these signatures to 'act the same' on emails. I've
had complaints about too many spaces, etc between the email and
signature, so I'm trying to resolve this.
If I take all the blank lines out of the top of the signatures,
sometimes they will continue the last line of the email if the user did
not hit <enter> at the end of their email.
Also, the signatures have one blank line at the end of them, but on
some emails they add 2 or 3 blank lines after the signature.
I created & edit these in ConsoleOne as we're running GW2012sp2 (from
March 2013). Clients are mainly win7 64bit at the same patch level.
What gives? What can I do to get these to look the same on all emails?
StevoHi Stevo,
Several years ago I had issues with signatures not looking right - similar to what you are experiencing. It was also very sporadic. It was specifically the HTML signature, the text one seemed to work fine.
After logging an SR with Novell we discovered that it was corruption in my ConsoleOne snapins. I redid the snapins, deleted and recreated the signatures and have never had a problem since. Admittedly we only apply global signatures to external mail.
It probably won't hurt to recopy your GroupWise snapins back to your management PC/Server where you are running ConsoleOne.
This is just my experience with signatures not applying correctly and might not apply to you.
Cheers, -
Windows server remote management / remote control agent
I have installed ZFS 6.5. I have installed the agent on an windows server
I have the consoleone snapins installed but there is no option to remote
control in consoleone on the server object. The server does not show any
sign of Zen remote control. Does the agent install include remote control
agent? If not, were is the install located and how do you configure it?
Also when getting packages what is the difference between ZFS 3.0 and the
version that comes with Zfs 6.5?Corey,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Newly created user packages with no admin rights
Hi all,
Have already opened a ticket with Novell on this one as i've never seen it before...
Have upgraded a site to ZFD7 SP1 IR2 using the iso's from the Novell site, so it's a full upgrade install, everything went perfectly on the server, consoleone snapins upgraded fine and all
however, if I try and create a user package with consoleone from the server, it hangs and never completes and I end up with packages with no rights for any users, so i'm unable to edit, delete or do anything with them
also tried using a workstation with IR4 snapins which gives the same result, using a spare consoleone with earlier zfd7 snapins I can create packages with no issues
Anyone run into this before and will we be able to get rid of these objects from the tree?
And are the IR4 snapins not compatable with IR2?gleach1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Repost of not answered question
Will be available a new update of ZFD 6.5 ( SP2 ) ? Possibly will be
this fixed ....
From: "Bambid" <[email protected]>
Subject: Re: Reporting error
Date: Thu, 23 Jun 2005 16:30:46 GMT
Message-ID: <WsBue.1980$[email protected]>
Lines: 22
Remco Jansen wrote:
> Hi all,
>
> We'd like to start using the nalDatabase for application reporting.
> However when I right-click the SERVER_nalDatabase object, select
> Reporting..., Faillure Report (or any other report) I run into this
> error: "ZENworks Reporting encoutered an error because of Crystal
> Reports".
>
> I already tried to reinstall the ConsoleOne snapins as mentioned in
> the documentation. Upgrading MDAC isn't possible as my XP-SP2 system
> won't accept MDAC 2.8 (it says it's integrated and patched already).
>
> So... can someone shed some light on how to get information out of
> this database? I'd like to at least be able to confirm it's
> functional.
Same error on Windows 2000 SP4, installed MDAC 2.6 and MDAC 2.8 too. No
change.
DavidBambid,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
So, if you have a licensed copy of groupwise, you have special .dc files that don't limit you to like 5 users, right?
But if you just go and download a support pack or something from download.novell.com you get the "limited" license files, right?
Normally I just copy the .dc files from the licensed into the newly downloaded ones for a quick "pre-built" SDD to install new stuff from.
But, can you mix .dc files from one OS to the other?
ie, original SDD that's licensed is NetWare, but now we're migrating to Linux.
Or must one use the licensed SDD for Linux and put those .dc files over?Hi,
kjhurni wrote:
>
> So, if you have a licensed copy of groupwise, you have special .dc files
> that don't limit you to like 5 users, right?
No. The 5 user limitation isn't in the .dc files, it's in the ConsoleOne
snapins.
> But if you just go and download a support pack or something from
> download.novell.com you get the "limited" license files, right?
No, yuo didn't get any .dc files at all. GW8 is different, it's
unrestricted.
> Normally I just copy the .dc files from the licensed into the newly
> downloaded ones for a quick "pre-built" SDD to install new stuff from.
As of the latest GW7 patch and GW8, that shouldn't be necessary any
more.
> But, can you mix .dc files from one OS to the other?
Yes, they're the same.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de
Maybe you are looking for
-
View Master mode strange behaviour with jpg files
Hy all, I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets .... I'm really concerned about a strange behaviour of the SW in view mode. If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pre
-
Hi.. I am going to do the MM-SUS Standard Interface. in this for Purchase order Confirmation and ASN Interfaces what are standard adapters for both sides. Regards, Pasi.
-
How do I keep text in a converted file??
I want to convert a PDF file that I received as an email attachement. Can I convert it without saving it first. It is the type that will let you save a blank form but not the info typed in and I don't want to retype the entire form.
-
Is it possible to publish an iPhoto slideshow with the music?
Is it possible to publish a slideshow with music so others can hear the music as well as see the photos? Thanks. (I have a MobileMe account).
-
TS1702 i have a problem with facebook notifications
i have a problem with notifications,when i restored the phone iphone 4s ios 6,i have installed facebook,the notifications worked but after i have closed the app after some time the app disappeared from the notification center settings and i can't get