Content model and transport in system using different repository

Hi experts,
In our development environment, we generated a content model for incoming post document
storing in a content server.
As the content model have been generated for this specific repository, I assume that this content model
will not work properly in an other environment using a different repository if we transport it. Am I correct?
Is it possible to change directly the content model assignment to a new repository in the target environment?
Or we have to generate a new content model in the target system using the initial content model as a template and assigning the
correct repository? In this case, we will have to maintain each content model in all the differents environments...
What are the best practises to handle this situation?
Thanks in advance for your help !
Regards
Frédéric

Dear Frederic,
It is possible to transport such model. You will just need to change the setting of the storage category to point to the new content server in the new system- transaction OACT. Storage category is attribute called STORAGE_CAT in the virtual PHIO class of the content model( ends with **V).
Please note that the content model should be transported in its creation language.
Best Regards,
Pragya

Similar Messages

All Information regarding Change and Transport management System in SAP

Hello Experts,
Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc. I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
Useful answers shall be rewarded points.
Thanks and Regards,
Somya

check this link
http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

HT201359 My wife and I want to use different credit cards to pay for our personal purchases while still being part of the Family. How is that possible?

My wife and I want to use different credit cards to pay for personal purchased will being part of a family share.. How is that possible?

Ricki46,
Thank you for allowing me to clarify. As it says in that article:
"When you initiate a new purchase, it will be billed directly to the family organizer's account, unless you have gift or store credit."
These are the only current billing options in Family Sharing. Using a second credit card is not currently an option.
If you need further clarification, you can use one of the other support options here: https://getsupport.apple.com/GetproductgroupList.action
Regards,
Jeff D.

Changing Original System and Transport Target System for Objects

Hi Gurus,
I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
Regards,
Harpal
Message was edited by:
Harpalsinh Gohil

If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
Why not close this thread and bump the other one?
Rob

Can the central system and the sender system at different time zone?

We have a control(i.e. central) system which is 6 hours ahead of the sender system.
When processing step "analyse tables in sender system", we get short dumps immediately at control , sender and receiver.
On the sender, the short dump reads:
Runtime Errors         CALL_FUNCTION_SEND_ERROR
Date and Time          01/15/2011 16:09:05
Short text
     " " (I/Oerror)
What happened?
     "CPIC-CALL: 'ThCMSEND' : cmRc=18 thRc=0#Statistics not active "
An error occurred when executing a Remote Function Call.
On the central system the short dump reads:
Runtime Errors         CALL_FUNCTION_REMOTE_ERROR
Date and Time          15.01.2011 22:09:00
Short text
     "Field symbol has not yet been assigned."
On the receiver the short dump reads:
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          01/15/2011 22:09:00
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
The current ABAP program "SAPLCNVTDMS_BW_FUNCTIONS_REM" had to be terminated .
We never get this error before on this step. The only thing I can think of is that the sender and the central system
are at different time zone.
Please share your experience.
Thanks!

Hi,
By looking at the runtime error , the reason of the dump should not be the timestamp diff .
You can create an OSS ticket with SAP for further analysis.
Also, there can be data consistency issues due to time diff .
Cheers
Sandeep

One adaptive RFC Model and Multi Backend System.

Hi All,
I am trying to fetch data from multi backend system by using an adaptive RFC model.
It is not tidy to create multi model for a RFC function to fetch data from multi SAP system, because we have dozens of SAP systems.(over 40)
So, I would like to switch to multiple SAP systems with an adaptive RFC model at runtime.
1 model(Same Function) -
> System A
> System B
> System C
Is there any sample or tutorial about this sort of senario?
Thanks in advance.
Message was edited by: JeongEog IM
Message was edited by: JeongEog IM

JeongEog,
You may use SAP java Connector for doing that. Refer the following links for the step-by-step approach.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/561106b8b3bc449f890cddfdc8d3e2/content.htm">Example program 1</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/eedf3d0eb8af5ee10000000a114084/content.htm">Open Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/efdf3d0eb8af5ee10000000a114084/content.htm">Calling a Function and Closing a Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/14e13d8ee4535ee10000000a114084/content.htm">Example program 2</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/eedf3d0eb8af5ee10000000a114084/content.htm">Connection Pool</a>
Bala

Where we can see calculation model and how we can use in HANA ?

Hi to all,
A small doubt.
While activating database procedure in HANA, system optimize the procedure and create calculation model that resemble a graphical calculation view.
1. Where and under which schema we can see calculation mode created for procedure.
and
2. Can we use this calculation mode in SAP HANA as calculation view, any PDF or weblink for same ?
Thanks
Pavneet Rana

Hi Pavneet,
not sure from where you got the idea that SAP HANA would create a calculation model that resembles a graphical calc view.
This is not true.
Stored Procedures, Attribute/Analytic views and Calculation views of any flavor are activated as Column Views. These column views can instantiate so-called calculation scenarios - which basically are the data flow definitions of your procedure or calculation views.
Upon execution of the column views, SAP HANA takes into account what data is actually asked for and re-optimizes the data flow dynamically.
For the end-user there is no way to have a visual display of the calculation scenario.
- Lars

What are management issues when Principal and DR mirroring environments use different drive letters. 2008R2 Enterprise Edition.

I have to build a DR environment. The drive letters on principal are different than I HAVE to use on new DR server. Is 2008R2 mirroring able to handle that difference in drive letters. And what are the complexities for managing this setup and failing over
from principal to DR? Thank you for your reply!

You can handle database Mirroring with difference in drive letters.
The mirroring is not centralized on drive letter but there will be some issues when you add a file to a PRINCIPAL, the DDL gets applied across mirror, then your database will go into suspended status until you duplicate the path on the mirror.
Its recommended to have same identical configuration.
You can refer the below link
http://www.extremeexperts.com/sql/articles/DBMirroring2.aspx
http://blogs.msdn.com/b/suhde/archive/2009/07/13/step-by-step-guide-to-configure-database-mirroring-between-sql-server-instances-in-a-workgroup.aspx
http://sqlserverperformance.wordpress.com/2012/03/12/sql-server-database-mirroring-tips-and-tricks-part-1/
-Prashanth

Keeping track of portal content and transports

Hi,
We have a DEV portal Ep 6.0 sp19. We would now like to setup QA and PRD systems and need a way to manage content between portals.
The document 'Best Practice - Transporting NetWeaver Portal Content' suggests using a Word document to keep track of content changes and transports.
link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/519d369b-0401-0010-0186-ff7a2b5d2bc0
Is there a SAP template that can be used as a starting point for such a document?
Regards
Sunil

Hi schlueterd!
Build a small applet extending Runnable, ie: a threaded one. Each time its "run" method loops the applet will read an small input file and updates "displaying score" component.
Of course you'll need to update this input file as soon as possible.
You'll use few classes and a good reference is any applet displaying scrolling text (search for open source in the web).
I hope it helps.

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

Use different iTunes and iCloud accounts only for backup

Hello Everyone,
Recently I update my iPhone 5,my wife iPhone 6 ,my wife iPad to iOS 8.3 and my MacBook Air to 10.10.3.
As part of the upgrade i purchase more space on iCloud for backuping my photo library.
I'm using the same account (iTunes and iCloud) on my Mac and my iPhone but using different one on my wife iPhone and iPad .
is there any option to use my iCloud account on my wife iPhone and iPad just for backuping purpose.
I saw that i can logged out from iCloud on her devices and logging in with my iCloud account but i'm affirmed to sync all of my personal data (contacts and so on) to her devices.
please advice.
Thanks,
Marco.

This sounds like misconfiguration issues.
For Calendars, log into each of your accounts on iCloud.com. Check the Calenders app there to ensure each of your iCloud-based calendars are properly shared between your wife and you. Remember, when you invite another person to share your calendar, that other person must accept the invitation.
For Contacts, make sure you have contacts in your account (check on your phone and on iCloud.com). On your phone, go under Settings/iCloud and make sure the toggle is on for Contacts. Again on your phone, go to Settings/Mail, Contacts, Calendars. Swipe down and make sure your default calendar is your iCloud-based calendar.
Hope this provides some insights that lead to a solution for you.
Learn More: http://www.mikerisner.com/news/use-icloud-for-your-mobile-mac-and-even-windows

Records Management: Content Model format in the Records Browser

I am new to Records Management. I have added attributes to a Content Model and I want to modify how it is displayed in the Records Browser of Records Management. How do I do this?

Hi,
Try this.
SPRO--> SAP NetWeaver --> Application Server --> Basis Services --> Records Management --> Customizing for Attributes (Property Unification) --> Create / Change Attributes Descriptions.
Here you selec your Attribute Model ID and do changes. Please reply this if your problem is solved by this. Thanks.
Munna.

Content model and transport in system using different repository

Similar Messages

Maybe you are looking for